Diff: TARGET_LPC812/PinNames.h

Revision:

66:9c8f0e3462fb

Parent:

64:e3affc9e7238

--- a/TARGET_LPC812/PinNames.h	Mon Aug 12 13:17:46 2013 +0300
+++ b/TARGET_LPC812/PinNames.h	Mon Aug 19 13:34:54 2013 +0300
@@ -1,106 +1,106 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
-    PIN_INPUT,
-    PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
-    P0_0 = 0,
-    P0_1 = 1,
-    P0_2 = 2,
-    P0_3 = 3,
-    P0_4 = 4,
-    P0_5 = 5,
-    P0_6 = 6,
-    P0_7 = 7,
-    P0_8 = 8,
-    P0_9 = 9,
-    P0_10 = 10,
-    P0_11 = 11,
-    P0_12 = 12,
-    P0_13 = 13,
-    P0_14 = 14,
-    P0_15 = 15,
-    P0_16 = 16,
-    P0_17 = 17,
-    
-    D0 = P0_0,
-    D1 = P0_4,
-    D2 = P0_6,
-    D3 = P0_8,
-    D4 = P0_9,
-    
-    D7 = P0_7,
-    D8 = P0_17,
-    D9 = P0_16,
-    D10 = P0_13,
-    D11 = P0_14,
-    D12 = P0_15,
-    D13 = P0_12,
-    
-    A4 = P0_10,
-    A5 = P0_11,
-    
-    // LPC800-MAX board
-    LED_RED = P0_7,
-    LED_GREEN = P0_17,
-    LED_BLUE = P0_16,
-    
-    // mbed original LED naming
-    LED1 = LED_BLUE,
-    LED2 = LED_GREEN,
-    LED3 = LED_RED,
-    LED4 = LED_RED,
-    
-    // Serial to USB pins
-    USBTX = P0_6,
-    USBRX = P0_1,
-    
-    // Not connected
-    NC = (int)0xFFFFFFFF,
-} PinName;
-
-typedef enum {
-    PullUp = 2,
-    PullDown = 1,
-    PullNone = 0,
-    Repeater = 3,
-    OpenDrain = 4
-} PinMode;
-
-#define STDIO_UART_TX     USBTX
-#define STDIO_UART_RX     USBRX
-
-typedef struct {
-    unsigned char n;
-    unsigned char offset;
-} SWM_Map;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+    P0_0 = 0,
+    P0_1 = 1,
+    P0_2 = 2,
+    P0_3 = 3,
+    P0_4 = 4,
+    P0_5 = 5,
+    P0_6 = 6,
+    P0_7 = 7,
+    P0_8 = 8,
+    P0_9 = 9,
+    P0_10 = 10,
+    P0_11 = 11,
+    P0_12 = 12,
+    P0_13 = 13,
+    P0_14 = 14,
+    P0_15 = 15,
+    P0_16 = 16,
+    P0_17 = 17,
+    
+    D0 = P0_0,
+    D1 = P0_4,
+    D2 = P0_6,
+    D3 = P0_8,
+    D4 = P0_9,
+    
+    D7 = P0_7,
+    D8 = P0_17,
+    D9 = P0_16,
+    D10 = P0_13,
+    D11 = P0_14,
+    D12 = P0_15,
+    D13 = P0_12,
+    
+    A4 = P0_10,
+    A5 = P0_11,
+    
+    // LPC800-MAX board
+    LED_RED = P0_7,
+    LED_GREEN = P0_17,
+    LED_BLUE = P0_16,
+    
+    // mbed original LED naming
+    LED1 = LED_BLUE,
+    LED2 = LED_GREEN,
+    LED3 = LED_RED,
+    LED4 = LED_RED,
+    
+    // Serial to USB pins
+    USBTX = P0_6,
+    USBRX = P0_1,
+    
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+} PinName;
+
+typedef enum {
+    PullUp = 2,
+    PullDown = 1,
+    PullNone = 0,
+    Repeater = 3,
+    OpenDrain = 4
+} PinMode;
+
+#define STDIO_UART_TX     USBTX
+#define STDIO_UART_RX     USBRX
+
+typedef struct {
+    unsigned char n;
+    unsigned char offset;
+} SWM_Map;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif