A web server for monitoring and controlling a MakerBot Replicator over the USB host and ethernet.

Dependencies:   IAP NTPClient RTC mbed-rtos mbed Socket lwip-sys lwip BurstSPI

Fork of LPC1768_Mini-DK by Frank Vannieuwkerke

Embed: (wiki syntax)

« Back to documentation index

Show/hide line numbers USBHost.h Source File

USBHost.h

00001 /* mbed USBHost Library
00002  * Copyright (c) 2006-2013 ARM Limited
00003  *
00004  * Licensed under the Apache License, Version 2.0 (the "License");
00005  * you may not use this file except in compliance with the License.
00006  * You may obtain a copy of the License at
00007  *
00008  *     http://www.apache.org/licenses/LICENSE-2.0
00009  *
00010  * Unless required by applicable law or agreed to in writing, software
00011  * distributed under the License is distributed on an "AS IS" BASIS,
00012  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
00013  * See the License for the specific language governing permissions and
00014  * limitations under the License.
00015  */
00016 
00017 #ifndef USBHOST_H
00018 #define USBHOST_H
00019 
00020 #include "USBHALHost.h"
00021 #include "USBDeviceConnected.h"
00022 #include "IUSBEnumerator.h"
00023 #include "USBHostConf.h"
00024 #include "rtos.h"
00025 #include "dbg.h"
00026 #include "USBHostHub.h"
00027 
00028 /**
00029 * USBHost class
00030 *   This class is a singleton. All drivers have a reference on the static USBHost instance
00031 */
00032 class USBHost : public USBHALHost {
00033 public:
00034     /**
00035     * Static method to create or retrieve the single USBHost instance
00036     */
00037     static USBHost * getHostInst();
00038     
00039     /**
00040     * Control read: setup stage, data stage and status stage
00041     *
00042     * @param dev the control read will be done for this device
00043     * @param requestType request type
00044     * @param request request
00045     * @param value value
00046     * @param index index
00047     * @param buf pointer on a buffer where will be store the data received
00048     * @param len length of the transfer
00049     *
00050     * @returns status of the control read
00051     */
00052     USB_TYPE controlRead(USBDeviceConnected * dev, uint8_t requestType, uint8_t request, uint32_t value, uint32_t index, uint8_t * buf, uint32_t len);
00053 
00054     /**
00055     * Control write: setup stage, data stage and status stage
00056     *
00057     * @param dev the control write will be done for this device
00058     * @param requestType request type
00059     * @param request request
00060     * @param value value
00061     * @param index index
00062     * @param buf pointer on a buffer which will be written
00063     * @param len length of the transfer
00064     *
00065     * @returns status of the control write
00066     */
00067     USB_TYPE controlWrite(USBDeviceConnected * dev, uint8_t requestType, uint8_t request, uint32_t value, uint32_t index, uint8_t * buf, uint32_t len);
00068 
00069     /**
00070     * Bulk read
00071     *
00072     * @param dev the bulk transfer will be done for this device
00073     * @param ep USBEndpoint which will be used to read a packet
00074     * @param buf pointer on a buffer where will be store the data received
00075     * @param len length of the transfer
00076     * @param blocking if true, the read is blocking (wait for completion)
00077     *
00078     * @returns status of the bulk read
00079     */
00080     USB_TYPE bulkRead(USBDeviceConnected * dev, USBEndpoint * ep, uint8_t * buf, uint32_t len, bool blocking = true);
00081 
00082     /**
00083     * Bulk write
00084     *
00085     * @param dev the bulk transfer will be done for this device
00086     * @param ep USBEndpoint which will be used to write a packet
00087     * @param buf pointer on a buffer which will be written
00088     * @param len length of the transfer
00089     * @param blocking if true, the write is blocking (wait for completion)
00090     *
00091     * @returns status of the bulk write
00092     */
00093     USB_TYPE bulkWrite(USBDeviceConnected * dev, USBEndpoint * ep, uint8_t * buf, uint32_t len, bool blocking = true);
00094 
00095     /**
00096     * Interrupt read
00097     *
00098     * @param dev the bulk transfer will be done for this device
00099     * @param ep USBEndpoint which will be used to write a packet
00100     * @param buf pointer on a buffer which will be written
00101     * @param len length of the transfer
00102     * @param blocking if true, the read is blocking (wait for completion)
00103     *
00104     * @returns status of the interrupt read
00105     */
00106     USB_TYPE interruptRead(USBDeviceConnected * dev, USBEndpoint * ep, uint8_t * buf, uint32_t len, bool blocking = true);
00107 
00108     /**
00109     * Interrupt write
00110     *
00111     * @param dev the bulk transfer will be done for this device
00112     * @param ep USBEndpoint which will be used to write a packet
00113     * @param buf pointer on a buffer which will be written
00114     * @param len length of the transfer
00115     * @param blocking if true, the write is blocking (wait for completion)
00116     *
00117     * @returns status of the interrupt write
00118     */
00119     USB_TYPE interruptWrite(USBDeviceConnected * dev, USBEndpoint * ep, uint8_t * buf, uint32_t len, bool blocking = true);
00120 
00121     /**
00122     * Enumerate a device.
00123     *
00124     * @param dev device which will be enumerated
00125     *
00126     * @returns status of the enumeration
00127     */
00128     USB_TYPE enumerate(USBDeviceConnected * dev, IUSBEnumerator* pEnumerator);
00129 
00130     /**
00131     * reset a specific device
00132     *
00133     * @param dev device which will be resetted
00134     */
00135     USB_TYPE resetDevice(USBDeviceConnected * dev);
00136 
00137     /**
00138     * Get a device
00139     *
00140     * @param index index of the device which will be returned
00141     *
00142     * @returns pointer on the "index" device
00143     */
00144     USBDeviceConnected * getDevice(uint8_t index);
00145 
00146     /*
00147     * If there is a HID device connected, the host stores the length of the report descriptor.
00148     * This avoid to the driver to re-ask the configuration descriptor to request the report descriptor
00149     *
00150     * @returns length of the report descriptor
00151     */
00152     inline uint16_t getLengthReportDescr() {
00153         return lenReportDescr;
00154     };
00155 
00156     /**
00157      *  register a driver into the host associated with a callback function called when the device is disconnected
00158      *
00159      *  @param dev device
00160      *  @param intf interface number
00161      *  @param tptr pointer to the object to call the member function on
00162      *  @param mptr pointer to the member function to be called
00163      */
00164     template<typename T>
00165     inline void registerDriver(USBDeviceConnected * dev, uint8_t intf, T* tptr, void (T::*mptr)(void)) {
00166         int index = findDevice(dev);
00167         if ((index != -1) && (mptr != NULL) && (tptr != NULL)) {
00168             USB_DBG("register driver for dev: %p on intf: %d", dev, intf);
00169             deviceAttachedDriver[index][intf] = true;
00170             dev->onDisconnect(intf, tptr, mptr);
00171         }
00172     }
00173 
00174     /**
00175      * register a driver into the host associated with a callback function called when the device is disconnected
00176      *
00177      * @param dev device
00178      * @param intf interface number
00179      * @param fn callback called when the specified device has been disconnected
00180      */
00181     inline void registerDriver(USBDeviceConnected * dev, uint8_t intf, void (*fn)(void)) {
00182         int index = findDevice(dev);
00183         if ((index != -1) && (fn != NULL)) {
00184             USB_DBG("register driver for dev: %p on intf: %d", dev, intf);
00185             deviceAttachedDriver[index][intf] = true;
00186             dev->onDisconnect(intf, fn);
00187         }
00188     }
00189     
00190     friend class USBHostHub;
00191 
00192 protected:
00193 
00194     /**
00195     * Virtual method called when a transfer has been completed
00196     *
00197     * @param addr list of the TDs which have been completed
00198     */
00199     virtual void transferCompleted(volatile uint32_t addr);
00200 
00201     /**
00202     * Virtual method called when a device has been connected
00203     *
00204     * @param hub hub number of the device
00205     * @param port port number of the device
00206     * @param lowSpeed 1 if low speed, 0 otherwise
00207     * @param hub_parent reference on the parent hub
00208     */
00209     virtual void deviceConnected(int hub, int port, bool lowSpeed, USBHostHub * hub_parent = NULL);
00210 
00211     /**
00212     * Virtuel method called when a device has been disconnected
00213     *
00214     * @param hub hub number of the device
00215     * @param port port number of the device
00216     * @param addr list of the TDs which have been completed to dequeue freed TDs
00217     */
00218     virtual void deviceDisconnected(int hub, int port, USBHostHub * hub_parent, volatile uint32_t addr);
00219 
00220 
00221 private:
00222     // singleton class -> constructor is private
00223     USBHost();
00224     static USBHost * instHost;
00225     uint16_t  lenReportDescr;
00226 
00227     // endpoints
00228     void unqueueEndpoint(USBEndpoint * ep) ;
00229     USBEndpoint  endpoints[MAX_ENDPOINT];
00230     USBEndpoint* volatile  control;
00231 
00232     USBEndpoint* volatile  headControlEndpoint;
00233     USBEndpoint* volatile  headBulkEndpoint;
00234     USBEndpoint* volatile  headInterruptEndpoint;
00235 
00236     USBEndpoint* volatile  tailControlEndpoint;
00237     USBEndpoint* volatile  tailBulkEndpoint;
00238     USBEndpoint* volatile  tailInterruptEndpoint;
00239 
00240     bool controlEndpointAllocated;
00241 
00242     // devices connected
00243     USBDeviceConnected devices[MAX_DEVICE_CONNECTED];
00244     bool  deviceInUse[MAX_DEVICE_CONNECTED];
00245     bool  deviceAttachedDriver[MAX_DEVICE_CONNECTED][MAX_INTF];
00246     bool  deviceReset[MAX_DEVICE_CONNECTED];
00247     bool  deviceInited[MAX_DEVICE_CONNECTED];
00248     
00249 #if MAX_HUB_NB
00250     USBHostHub hubs[MAX_HUB_NB];
00251     bool hub_in_use[MAX_HUB_NB];
00252 #endif
00253 
00254     // to store a setup packet
00255     uint8_t  setupPacket[8];
00256     
00257     typedef struct {
00258         uint8_t event_id;
00259         void * td_addr;
00260         uint8_t hub;
00261         uint8_t port;
00262         uint8_t lowSpeed;
00263         uint8_t td_state;
00264         void * hub_parent;
00265     } message_t;
00266     
00267     Thread usbThread;
00268     void usb_process();
00269     static void usb_process_static(void const * arg);
00270     Mail<message_t, 10> mail_usb_event;
00271     Mutex usb_mutex;
00272     Mutex td_mutex;
00273     
00274     // buffer for conf descriptor
00275     uint8_t data[300];
00276     
00277     /**
00278     * Add a transfer on the TD linked list associated to an ED
00279     *
00280     * @param ed the transfer is associated to this ed
00281     * @param buf pointer on a buffer where will be read/write data to send or receive
00282     * @param len transfer length
00283     *
00284     * @return status of the transfer
00285     */
00286     USB_TYPE addTransfer(USBEndpoint * ed, uint8_t * buf, uint32_t len) ;
00287     
00288     /**
00289     * Link the USBEndpoint to the linked list and attach an USBEndpoint this USBEndpoint to a device
00290     *
00291     * @param dev pointer on a USBDeviceConnected object
00292     * @param ep pointer on the USBEndpoint which will be added
00293     *
00294     * return true if successful
00295     */
00296     bool addEndpoint(USBDeviceConnected * dev, uint8_t intf_nb, USBEndpoint * ep) ;
00297 
00298     /**
00299     * Create an USBEndpoint descriptor. Warning: the USBEndpoint is not linked.
00300     *
00301     * @param type USBEndpoint type (CONTROL_ENDPOINT, BULK_ENDPOINT, INTERRUPT_ENDPOINT)
00302     * @param dir USBEndpoint direction (no meaning for CONTROL_ENDPOINT)
00303     * @param size USBEndpoint max packet size
00304     * @param addr USBEndpoint address
00305     *
00306     * @returns pointer on the USBEndpoint created
00307     */
00308     USBEndpoint * newEndpoint(ENDPOINT_TYPE type, ENDPOINT_DIRECTION dir, uint32_t size, uint8_t addr) ;
00309     
00310     /**
00311     * Request the device descriptor
00312     *
00313     * @param dev request the device descriptor on this device
00314     * @param buf buffer to store the device descriptor
00315     * @param max_len_buf maximum size of buf
00316     * @param len_dev_descr pointer to store the length of the packet transferred
00317     */
00318     USB_TYPE getDeviceDescriptor(USBDeviceConnected * dev, uint8_t * buf, uint16_t max_len_buf, uint16_t * len_dev_descr = NULL);
00319 
00320     /**
00321     * Request the configuration descriptor
00322     *
00323     * @param dev request the configuration descriptor on this device
00324     * @param buf buffer to store the configuration descriptor
00325     * @param max_len_buf maximum size of buf
00326     * @param len_conf_descr pointer to store the length of the packet transferred
00327     */
00328     USB_TYPE getConfigurationDescriptor(USBDeviceConnected * dev, uint8_t * buf, uint16_t max_len_buf, uint16_t * len_conf_descr = NULL);
00329     
00330     /**
00331     * Set the address of a specific device
00332     *
00333     * @param dev device to set the address
00334     * @param address address
00335     */
00336     USB_TYPE setAddress(USBDeviceConnected * dev, uint8_t address);
00337 
00338     /**
00339     * Set the configuration of a device
00340     *
00341     * @param dev device on which the specified configuration will be activated
00342     * @param conf configuration number to activate (usually 1)
00343     */
00344     USB_TYPE setConfiguration(USBDeviceConnected * dev, uint8_t conf);
00345     
00346     /**
00347     * Free a specific device
00348     *
00349     * @param dev device to be freed
00350     */
00351     void freeDevice(USBDeviceConnected * dev);
00352 
00353     USB_TYPE controlTransfer(   USBDeviceConnected * dev,
00354                                 uint8_t requestType,
00355                                 uint8_t request,
00356                                 uint32_t value,
00357                                 uint32_t index,
00358                                 uint8_t * buf,
00359                                 uint32_t len,
00360                                 bool write);
00361 
00362     USB_TYPE generalTransfer(   USBDeviceConnected * dev,
00363                                 USBEndpoint * ep,
00364                                 uint8_t * buf,
00365                                 uint32_t len,
00366                                 bool blocking,
00367                                 ENDPOINT_TYPE type,
00368                                 bool write) ;
00369                                 
00370     void fillControlBuf(uint8_t requestType, uint8_t request, uint16_t value, uint16_t index, int len) ;
00371     void parseConfDescr(USBDeviceConnected * dev, uint8_t * conf_descr, uint32_t len, IUSBEnumerator* pEnumerator) ;
00372     int findDevice(USBDeviceConnected * dev) ;
00373     int findDevice(uint8_t hub, uint8_t port, USBHostHub * hub_parent = NULL) ;
00374     uint8_t numberDriverAttached(USBDeviceConnected * dev);
00375 
00376     /////////////////////////
00377     /// FOR DEBUG
00378     /////////////////////////
00379     void printList(ENDPOINT_TYPE type);
00380 
00381 };
00382 
00383 #endif