File content as of revision 0:2d84c250f000:

#include "mbed.h"
#include "HX711.h"
 
DigitalOut gpo(D0);
//DigitalOut led(LED_BLUE);
DigitalOut led(LED1);

HX711 scale(p6,p7);
 
AnalogIn scaleRaw(A3);
Serial pc(USBTX, USBRX);    // USB Serial Terminal
float calibration_factor = 1.000; //-7050 worked for my 440lb max scale setup
int averageSamples = 100;

LocalFileSystem local("local");               // Create the local filesystem under the name "local"

int i; 
 
int main(void)
{
  //  pc.printf("Starting Scale");
  //  pc.printf("HX711 calibration sketch");
  //  pc.printf("Remove all weight from scale");
  //  pc.printf("After readings begin, place known weight on scale");
  //  pc.printf("Press + or a to increase calibration factor");
  //  pc.printf("Press - or z to decrease calibration factor");
    
      
    scale.setScale(0);
    scale.tare(); //Reset the scale to 0
    
    long zero_factor = scale.averageValue(averageSamples); //Get a baseline reading
  //  pc.printf("Zero factor: %.4f\n" , zero_factor); //This can be used to remove the need to tare the scale. Useful in permanent scale projects.
    
    //while (true) {
        scale.setScale(calibration_factor); //Adjust to this calibration factor
        float weight = scale.getGram();
       // pc.printf(" %5.3e\n", weight);

    FILE *fp = fopen("/local/out.txt", "w");  // Open "out.txt" on the local file system for writing
    fprintf(fp, " %5.3e\n", weight);
    fclose(fp);
 
 
        gpo = !gpo; // toggle pin
        led = !led; // toggle led
        wait(0.2f);
   // }
}