jun takahashi / Mbed 2 deprecated loadcell_2

ACM experimental

Dependencies:   mbed HX711_2

main.cpp@0:6f1fa439a9bf, 2019-02-28 (annotated)

Committer:
j8813
Date:
Thu Feb 28 02:43:38 2019 +0000
Revision:
0:6f1fa439a9bf
ACM experimental

Who changed what in which revision?

UserRevisionLine numberNew contents of line
j8813 0:6f1fa439a9bf 1 #include "mbed.h"
j8813 0:6f1fa439a9bf 2 #include "HX711.h"
j8813 0:6f1fa439a9bf 3
j8813 0:6f1fa439a9bf 4 DigitalOut gpo(D0);
j8813 0:6f1fa439a9bf 5 //DigitalOut led(LED_BLUE);
j8813 0:6f1fa439a9bf 6 DigitalOut led(LED1);
j8813 0:6f1fa439a9bf 7
j8813 0:6f1fa439a9bf 8 HX711 scale(p6,p7);
j8813 0:6f1fa439a9bf 9
j8813 0:6f1fa439a9bf 10 AnalogIn scaleRaw(A3);
j8813 0:6f1fa439a9bf 11 Serial pc(USBTX, USBRX); // USB Serial Terminal
j8813 0:6f1fa439a9bf 12 float calibration_factor = 1.000; //-7050 worked for my 440lb max scale setup
j8813 0:6f1fa439a9bf 13 int averageSamples = 100;
j8813 0:6f1fa439a9bf 14
j8813 0:6f1fa439a9bf 15 int main(void)
j8813 0:6f1fa439a9bf 16 {
j8813 0:6f1fa439a9bf 17 // pc.printf("Starting Scale");
j8813 0:6f1fa439a9bf 18 // pc.printf("HX711 calibration sketch");
j8813 0:6f1fa439a9bf 19 // pc.printf("Remove all weight from scale");
j8813 0:6f1fa439a9bf 20 // pc.printf("After readings begin, place known weight on scale");
j8813 0:6f1fa439a9bf 21 // pc.printf("Press + or a to increase calibration factor");
j8813 0:6f1fa439a9bf 22 // pc.printf("Press - or z to decrease calibration factor");
j8813 0:6f1fa439a9bf 23
j8813 0:6f1fa439a9bf 24
j8813 0:6f1fa439a9bf 25 scale.setScale(0);
j8813 0:6f1fa439a9bf 26 scale.tare(); //Reset the scale to 0
j8813 0:6f1fa439a9bf 27
j8813 0:6f1fa439a9bf 28 long zero_factor = scale.averageValue(averageSamples); //Get a baseline reading
j8813 0:6f1fa439a9bf 29 // pc.printf("Zero factor: %.4f\n" , zero_factor); //This can be used to remove the need to tare the scale. Useful in permanent scale projects.
j8813 0:6f1fa439a9bf 30
j8813 0:6f1fa439a9bf 31 while (true) {
j8813 0:6f1fa439a9bf 32 scale.setScale(calibration_factor); //Adjust to this calibration factor
j8813 0:6f1fa439a9bf 33 float weight = scale.getGram();
j8813 0:6f1fa439a9bf 34 //float raw = scaleRaw.read();
j8813 0:6f1fa439a9bf 35 pc.printf(" %5.3e\n", weight);
j8813 0:6f1fa439a9bf 36 //pc.printf("Raw Value: %.7f\n", raw);
j8813 0:6f1fa439a9bf 37 // pc.printf(" calibration_factor: %5.3e\n", calibration_factor);
j8813 0:6f1fa439a9bf 38
j8813 0:6f1fa439a9bf 39
j8813 0:6f1fa439a9bf 40 if(pc.readable()) {
j8813 0:6f1fa439a9bf 41 char temp = pc.getc();
j8813 0:6f1fa439a9bf 42 if(temp == '+' || temp == 'a')
j8813 0:6f1fa439a9bf 43 calibration_factor += 10;
j8813 0:6f1fa439a9bf 44 else if(temp == '-' || temp == 'z')
j8813 0:6f1fa439a9bf 45 calibration_factor -= 10;
j8813 0:6f1fa439a9bf 46 }
j8813 0:6f1fa439a9bf 47 gpo = !gpo; // toggle pin
j8813 0:6f1fa439a9bf 48 led = !led; // toggle led
j8813 0:6f1fa439a9bf 49 wait(0.2f);
j8813 0:6f1fa439a9bf 50 }
j8813 0:6f1fa439a9bf 51 }