Port of Adafruit Arduino code

Dependencies:   mbed

Fork of Adafruit9-DOf by Bruno Manganelli

Revision:
0:772bf4786416
diff -r 000000000000 -r 772bf4786416 Source/Adafruit_L3GD20_U.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Source/Adafruit_L3GD20_U.cpp	Sat Mar 21 12:33:05 2015 +0000
@@ -0,0 +1,310 @@
+/***************************************************
+  This is a library for the L3GD20 GYROSCOPE
+
+  Designed specifically to work with the Adafruit L3GD20 Breakout 
+  ----> https://www.adafruit.com/products/1032
+
+  These sensors use I2C or SPI to communicate, 2 pins (I2C) 
+  or 4 pins (SPI) are required to interface.
+
+  Adafruit invests time and resources providing this open source code,
+  please support Adafruit and open-source hardware by purchasing
+  products from Adafruit!
+
+  Written by Kevin "KTOWN" Townsend for Adafruit Industries.
+  BSD license, all text above must be included in any redistribution
+ ****************************************************/
+
+#include "Adafruit_L3GD20_U.h"
+
+/***************************************************************************
+ PRIVATE FUNCTIONS
+ ***************************************************************************/
+
+/**************************************************************************/
+/*!
+    @brief  Abstract away platform differences in Arduino wire library
+*/
+/**************************************************************************/
+void Adafruit_L3GD20_Unified::write8(byte reg, byte value)
+{
+  byte data[2] = {reg,value};
+  i2c->write(L3GD20_ADDRESS, data, 2);
+}
+
+/**************************************************************************/
+/*!
+    @brief  Abstract away platform differences in Arduino wire library
+*/
+/**************************************************************************/
+byte Adafruit_L3GD20_Unified::read8(byte reg)
+{
+  byte value = reg;
+  i2c->write(L3GD20_ADDRESS, &value, 1);
+  i2c->read (L3GD20_ADDRESS, &value, 1);
+  
+  return value;
+}
+
+/***************************************************************************
+ CONSTRUCTOR
+ ***************************************************************************/
+ 
+/**************************************************************************/
+/*!
+    @brief  Instantiates a new Adafruit_L3GD20_Unified class
+*/
+/**************************************************************************/
+Adafruit_L3GD20_Unified::Adafruit_L3GD20_Unified(int32_t sensorID) {
+  _sensorID = sensorID;
+  _autoRangeEnabled = false;
+}
+
+/***************************************************************************
+ PUBLIC FUNCTIONS
+ ***************************************************************************/
+ 
+/**************************************************************************/
+/*!
+    @brief  Setups the HW
+*/
+/**************************************************************************/
+bool Adafruit_L3GD20_Unified::begin(gyroRange_t rng)
+{
+
+
+  /* Set the range the an appropriate value */  
+  _range = rng;
+
+  /* Make sure we have the correct chip ID since this checks
+     for correct address and that the IC is properly connected */
+  uint8_t id = read8(GYRO_REGISTER_WHO_AM_I);
+  //Serial.println(id, HEX);
+  if ((id != L3GD20_ID) && (id != L3GD20H_ID))
+  {
+    return false;
+  }
+
+  /* Set CTRL_REG1 (0x20)
+   ====================================================================
+   BIT  Symbol    Description                                   Default
+   ---  ------    --------------------------------------------- -------
+   7-6  DR1/0     Output data rate                                   00
+   5-4  BW1/0     Bandwidth selection                                00
+     3  PD        0 = Power-down mode, 1 = normal/sleep mode          0
+     2  ZEN       Z-axis enable (0 = disabled, 1 = enabled)           1
+     1  YEN       Y-axis enable (0 = disabled, 1 = enabled)           1
+     0  XEN       X-axis enable (0 = disabled, 1 = enabled)           1 */
+
+  /* Reset then switch to normal mode and enable all three channels */
+  write8(GYRO_REGISTER_CTRL_REG1, 0x00);
+  write8(GYRO_REGISTER_CTRL_REG1, 0x0F);
+  /* ------------------------------------------------------------------ */
+
+  /* Set CTRL_REG2 (0x21)
+   ====================================================================
+   BIT  Symbol    Description                                   Default
+   ---  ------    --------------------------------------------- -------
+   5-4  HPM1/0    High-pass filter mode selection                    00
+   3-0  HPCF3..0  High-pass filter cutoff frequency selection      0000 */
+
+  /* Nothing to do ... keep default values */
+  /* ------------------------------------------------------------------ */
+
+  /* Set CTRL_REG3 (0x22)
+   ====================================================================
+   BIT  Symbol    Description                                   Default
+   ---  ------    --------------------------------------------- -------
+     7  I1_Int1   Interrupt enable on INT1 (0=disable,1=enable)       0
+     6  I1_Boot   Boot status on INT1 (0=disable,1=enable)            0
+     5  H-Lactive Interrupt active config on INT1 (0=high,1=low)      0
+     4  PP_OD     Push-Pull/Open-Drain (0=PP, 1=OD)                   0
+     3  I2_DRDY   Data ready on DRDY/INT2 (0=disable,1=enable)        0
+     2  I2_WTM    FIFO wtrmrk int on DRDY/INT2 (0=dsbl,1=enbl)        0
+     1  I2_ORun   FIFO overrun int on DRDY/INT2 (0=dsbl,1=enbl)       0
+     0  I2_Empty  FIFI empty int on DRDY/INT2 (0=dsbl,1=enbl)         0 */
+
+  /* Nothing to do ... keep default values */
+  /* ------------------------------------------------------------------ */
+
+  /* Set CTRL_REG4 (0x23)
+   ====================================================================
+   BIT  Symbol    Description                                   Default
+   ---  ------    --------------------------------------------- -------
+     7  BDU       Block Data Update (0=continuous, 1=LSB/MSB)         0
+     6  BLE       Big/Little-Endian (0=Data LSB, 1=Data MSB)          0
+   5-4  FS1/0     Full scale selection                               00
+                                  00 = 250 dps
+                                  01 = 500 dps
+                                  10 = 2000 dps
+                                  11 = 2000 dps
+     0  SIM       SPI Mode (0=4-wire, 1=3-wire)                       0 */
+
+  /* Adjust resolution if requested */
+  switch(_range)
+  {
+    case GYRO_RANGE_250DPS:
+      write8(GYRO_REGISTER_CTRL_REG4, 0x00);
+      break;
+    case GYRO_RANGE_500DPS:
+      write8(GYRO_REGISTER_CTRL_REG4, 0x10);
+      break;
+    case GYRO_RANGE_2000DPS:
+      write8(GYRO_REGISTER_CTRL_REG4, 0x20);
+      break;
+  }
+  /* ------------------------------------------------------------------ */
+
+  /* Set CTRL_REG5 (0x24)
+   ====================================================================
+   BIT  Symbol    Description                                   Default
+   ---  ------    --------------------------------------------- -------
+     7  BOOT      Reboot memory content (0=normal, 1=reboot)          0
+     6  FIFO_EN   FIFO enable (0=FIFO disable, 1=enable)              0
+     4  HPen      High-pass filter enable (0=disable,1=enable)        0
+   3-2  INT1_SEL  INT1 Selection config                              00
+   1-0  OUT_SEL   Out selection config                               00 */
+
+  /* Nothing to do ... keep default values */
+  /* ------------------------------------------------------------------ */
+
+  return true;
+}
+
+/**************************************************************************/
+/*! 
+    @brief  Enables or disables auto-ranging
+*/
+/**************************************************************************/
+void Adafruit_L3GD20_Unified::enableAutoRange(bool enabled)
+{
+  _autoRangeEnabled = enabled;
+}
+
+/**************************************************************************/
+/*! 
+    @brief  Gets the most recent sensor event
+*/
+/**************************************************************************/
+void Adafruit_L3GD20_Unified::getEvent(sensors_event_t* event)
+{
+  bool readingValid = false;
+  
+  /* Clear the event */
+  memset(event, 0, sizeof(sensors_event_t));
+
+  event->version   = sizeof(sensors_event_t);
+  event->sensor_id = _sensorID;
+  event->type      = SENSOR_TYPE_GYROSCOPE;
+  
+  while(!readingValid)
+  {
+    event->timestamp = millis();
+ 
+    
+    i2c->writeByte(L3GD20_ADDRESS, GYRO_REGISTER_OUT_X_L | 0x80);
+    
+    byte data[6];
+    
+    i2c->read(L3GD20_ADDRESS, data, 6);
+ 
+    /* Shift values to create properly formed integer (low byte first) */
+    event->gyro.x = (int16_t)(data[0] | (data[1] << 8));
+    event->gyro.y = (int16_t)(data[2] | (data[3] << 8));
+    event->gyro.z = (int16_t)(data[4] | (data[5] << 8));
+    
+    /* Make sure the sensor isn't saturating if auto-ranging is enabled */
+    if (!_autoRangeEnabled)
+    {
+      readingValid = true;
+    }
+    else
+    {
+      /* Check if the sensor is saturating or not */
+      if ( (event->gyro.x >= 32760) | (event->gyro.x <= -32760) | 
+           (event->gyro.y >= 32760) | (event->gyro.y <= -32760) | 
+           (event->gyro.z >= 32760) | (event->gyro.z <= -32760) )
+      {
+        /* Saturating .... increase the range if we can */
+        switch(_range)
+        {
+          case GYRO_RANGE_500DPS:
+            /* Push the range up to 2000dps */
+            _range = GYRO_RANGE_2000DPS;
+            write8(GYRO_REGISTER_CTRL_REG1, 0x00);
+            write8(GYRO_REGISTER_CTRL_REG1, 0x0F);
+            write8(GYRO_REGISTER_CTRL_REG4, 0x20);
+            write8(GYRO_REGISTER_CTRL_REG5, 0x80);
+            readingValid = false;
+            // Serial.println("Changing range to 2000DPS");
+            break;
+          case GYRO_RANGE_250DPS:
+            /* Push the range up to 500dps */
+            _range = GYRO_RANGE_500DPS;
+            write8(GYRO_REGISTER_CTRL_REG1, 0x00);
+            write8(GYRO_REGISTER_CTRL_REG1, 0x0F);
+            write8(GYRO_REGISTER_CTRL_REG4, 0x10);
+            write8(GYRO_REGISTER_CTRL_REG5, 0x80);
+            readingValid = false;
+            // Serial.println("Changing range to 500DPS");
+            break;
+          default:
+            readingValid = true;
+            break;  
+        }
+      }
+      else
+      {
+        /* All values are withing range */
+        readingValid = true;
+      }
+    }
+  }
+  
+  /* Compensate values depending on the resolution */
+  switch(_range)
+  {
+    case GYRO_RANGE_250DPS:
+      event->gyro.x *= GYRO_SENSITIVITY_250DPS;
+      event->gyro.y *= GYRO_SENSITIVITY_250DPS;
+      event->gyro.z *= GYRO_SENSITIVITY_250DPS;
+      break;
+    case GYRO_RANGE_500DPS:
+      event->gyro.x *= GYRO_SENSITIVITY_500DPS;
+      event->gyro.y *= GYRO_SENSITIVITY_500DPS;
+      event->gyro.z *= GYRO_SENSITIVITY_500DPS;
+      break;
+    case GYRO_RANGE_2000DPS:
+      event->gyro.x *= GYRO_SENSITIVITY_2000DPS;
+      event->gyro.y *= GYRO_SENSITIVITY_2000DPS;
+      event->gyro.z *= GYRO_SENSITIVITY_2000DPS;
+      break;
+  }
+  
+  /* Convert values to rad/s */
+  event->gyro.x *= SENSORS_DPS_TO_RADS;
+  event->gyro.y *= SENSORS_DPS_TO_RADS;
+  event->gyro.z *= SENSORS_DPS_TO_RADS;
+}
+
+/**************************************************************************/
+/*! 
+    @brief  Gets the sensor_t data
+*/
+/**************************************************************************/
+void  Adafruit_L3GD20_Unified::getSensor(sensor_t* sensor)
+{  
+  /* Clear the sensor_t object */
+  memset(sensor, 0, sizeof(sensor_t));
+
+  /* Insert the sensor name in the fixed length char array */
+  strncpy (sensor->name, "L3GD20", sizeof(sensor->name) - 1);
+  sensor->name[sizeof(sensor->name)- 1] = 0;
+  sensor->version     = 1;
+  sensor->sensor_id   = _sensorID;
+  sensor->type        = SENSOR_TYPE_GYROSCOPE;
+  sensor->min_delay   = 0;
+  sensor->max_value   = (float)this->_range * SENSORS_DPS_TO_RADS;
+  sensor->min_value   = (this->_range * -1.0) * SENSORS_DPS_TO_RADS;
+  sensor->resolution  = 0.0F; // TBD
+}