Ilya I
Example program with HTTPServer and sensor data streaming over TCPSockets, using Donatien Garnier's Net APIs and services code on top of LWIP. Files StreamServer.h and .cpp encapsulate streaming over TCPSockets. Broadcast is done by sendToAll(), and all incoming data is echoed back to the client. Echo code can be replaced with some remote control of the streaming interface. See main() that shows how to periodically send some data to all subscribed clients. To subscribe, a client should open a socket at <mbed_ip> port 123. I used few lines in TCL code to set up a quick sink for the data. HTTP files are served on port 80 concurrently to the streaming.
drv/serial/usb/usbserialif.cpp
- Committer:
- iva2k
- Date:
- 2010-06-12
- Revision:
- 0:e614f7875b60
File content as of revision 0:e614f7875b60:
/*
Copyright (c) 2010 Donatien Garnier (donatiengar [at] gmail [dot] com)
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
*/
/*
USB-Serial device driver
Donatien Garnier 2010
*/
#include "usbserialif.h"
#include "drv/usb/UsbEndpoint.h"
#include "netCfg.h"
#if NET_USB_SERIAL
UsbEndpoint* pEpIn;
UsbEndpoint* pEpOut;
USB_INT08U ser_int_found;
USB_INT32S SerialInit()
{
Host_Init(); // Initialize the host controller
USB_INT32S rc = Host_EnumDev(); // Enumerate the device connected
if (rc != OK)
{
fprintf(stderr, "Could not enumerate device: %d\n", rc);
return rc;
}
return OK;
}
bool SerialHasToSwitch()
{
return (ser_int_found == 3);
}
uint16_t m_vid;
uint16_t m_pid;
USB_INT32S SerialSendMagic()
{
bool scsi = false;
//Size 31
const unsigned char magicHuawei[] = { 0x55, 0x53, 0x42, 0x43, 0x12, 0x34, 0x56, 0x78, 0, 0, 0, 0, 0, 0, 0, 0x11, 0x6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
const unsigned char magicVoda[] = { 0x55, 0x53, 0x42, 0x43, 0x78, 0x56, 0x34, 0x12, 0x01, 0, 0, 0, 0x80, 0, 0x06, 0x01, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
char* magic;
USB_INT32S rc;
if((m_vid == 0x12d1) && (m_pid == 0x1446))
{
PRINT_Log("\r\nHuawei magic packet sent.\r\n");
magic = (char*) magicHuawei;
scsi = true;
}
else if((m_vid == 0x12d1) && (m_pid == 0x1003))
{
PRINT_Log("\r\nHuawei magic control packet sent.\r\n");
rc = Host_CtrlSend( 0 /*USB_TYPE_STANDARD | USB_RECIP_DEVICE*/, 0x03 /*USB_REQ_SET_FEATURE*/, 00000001, 0, 0, NULL);
}
else if(m_vid == 0x0af0)
{
PRINT_Log("\r\nVoda magic packet sent.\r\n");
magic = (char*) magicVoda;
scsi = true;
}
else
{
return -1;
}
if(scsi)
{
//rc = Host_ProcessTD(EDBulkOut, TD_OUT, (volatile USB_INT08U*)magic, 31);
rc = pEpOut->transfer((volatile USB_INT08U*)magic, 31);
while(rc == PROCESSING)
{
// __WFI();
rc = pEpOut->status();
}
}
delete pEpOut;
pEpOut = NULL;
return rc;
}
USB_INT32S SerialCheckVidPid()
{
volatile USB_INT08U *desc_ptr;
desc_ptr = TDBuffer;
ser_int_found = 0;
m_vid = *((USB_INT16U*)&desc_ptr[8]);
m_pid = *((USB_INT16U*)&desc_ptr[10]);
if (desc_ptr[1] != USB_DESCRIPTOR_TYPE_DEVICE) {
PRINT_Log("\r\nLen = %02x\r\n",desc_ptr[0]);
PRINT_Log("\r\nDesc code %02x\r\n",desc_ptr[1]);
return (ERR_BAD_CONFIGURATION);
}
if( m_vid == 0x12d1 &&//Huawei : Change
m_pid == 0x1446 )
{
PRINT_Log("\r\nHuawei device found in CDFS mode\r\n");
ser_int_found=3;
}
else if( m_vid == 0x12d1 &&//Huawei : Change
m_pid == 0x1001 )
{
PRINT_Log("\r\nHuawei device found in Serial mode\r\n");
ser_int_found=1;
}
else if( m_vid == 0x0af0 &&//Voda?Qualcomm? : Change
m_pid == 0x7501 )
{
PRINT_Log("\r\nVodafone K3760 found, checking mode...\r\n");
ser_int_found=3;
}
else if( m_vid == 0x12d1 &&//Voda?Qualcomm? : Change
m_pid == 0x1003 )
{
PRINT_Log("\r\nHuawei device found, checking mode...\r\n");
ser_int_found=3;
}
else
{
PRINT_Log("\r\nDevice %04x : %04x found.\r\n",m_vid,m_pid);
}
return OK;
}
USB_INT32S SerialParseConfig()
{
volatile USB_INT08U *desc_ptr;
desc_ptr = TDBuffer;
if (desc_ptr[1] != USB_DESCRIPTOR_TYPE_CONFIGURATION) {
return (ERR_BAD_CONFIGURATION);
}
desc_ptr += desc_ptr[0];
int epOut = 0;
int epIn = 0;
pEpOut = NULL;
pEpIn = NULL;
while (desc_ptr != TDBuffer + ReadLE16U(&TDBuffer[2])) {
switch (desc_ptr[1]) {
case USB_DESCRIPTOR_TYPE_INTERFACE:
PRINT_Log("\r\nIf %02x:%02x:%02x.\r\n",desc_ptr[5],desc_ptr[6],desc_ptr[7]);
if (desc_ptr[5] == 0xFF &&
desc_ptr[6] == 0xFF &&
desc_ptr[7] == 0xFF ) {
//if(ser_int_found==1)
ser_int_found=2;
}
desc_ptr += desc_ptr[0]; /* Move to next descriptor start */
break;
case USB_DESCRIPTOR_TYPE_ENDPOINT: /* If it is an endpoint descriptor */
PRINT_Log("\r\nEp %02x of size %d.\r\n", desc_ptr[2], (ReadLE16U(&desc_ptr[4]) ));
if ( SerialHasToSwitch() )
{
if( pEpOut == NULL /*desc_ptr[2] == 1*/) //EP 1
{
#if 0
EDBulkOut->Control = 1 | /* USB address */
((desc_ptr[2] & 0x7F) << 7) | /* Endpoint address */
(1 << 11) | /* direction */
(ReadLE16U(&desc_ptr[4]) << 16); /* MaxPkt Size */
#endif
pEpOut = new UsbEndpoint((desc_ptr[2] & 0x7F), false, ReadLE16U(&desc_ptr[4]));
}
desc_ptr += desc_ptr[0]; /* Move to next descriptor start */
}
else if ((desc_ptr[3] & 0x03) == 0x02) { /* If it is Bulk endpoint */
if (desc_ptr[2] & 0x80) { /* If it is In endpoint */
if(epIn == 0)
{
PRINT_Log("\r\nEp %02x is in ep.\r\n", desc_ptr[2]);
#if 0
EDBulkIn->Control = 1 | /* USB address */
((desc_ptr[2] & 0x7F) << 7) | /* Endpoint address */
(2 << 11) | /* direction */
(ReadLE16U(&desc_ptr[4]) << 16); /* MaxPkt Size */
#endif
// pEpIn = new UsbEndpoint((desc_ptr[2] & 0x7F), true, ReadLE16U(&desc_ptr[4]));
}
epIn++;
desc_ptr += desc_ptr[0]; /* Move to next descriptor start */
} else { /* If it is Out endpoint */
if(epOut == 0)
{
PRINT_Log("\r\nEp %02x is out ep.\r\n", desc_ptr[2]);
#if 0
EDBulkOut->Control = 1 | /* USB address */
((desc_ptr[2] & 0x7F) << 7) | /* Endpoint address */
(1 << 11) | /* direction */
(ReadLE16U(&desc_ptr[4]) << 16); /* MaxPkt Size */
#endif
// pEpOut = new UsbEndpoint((desc_ptr[2] & 0x7F), false, ReadLE16U(&desc_ptr[4]));
}
epOut++;
desc_ptr += desc_ptr[0]; /* Move to next descriptor start */
}
} else { /* If it is not bulk end point */
desc_ptr += desc_ptr[0]; /* Move to next descriptor start */
}
break;
default: /* If the descriptor is neither interface nor endpoint */
desc_ptr += desc_ptr[0]; /* Move to next descriptor start */
break;
}
}
if (ser_int_found==2) {
PRINT_Log("Virtual Serial Port device %04x:%04x connected, vid=%d, pid=%d, E220=%d\n", m_vid, m_pid, ( m_vid == 0x12d1 ), ( m_pid == 0x1003 ), (( m_vid == 0x12d1 ) && ( m_pid == 0x1003 )));
if(m_vid==0x0af0) //Voda
{
pEpOut = new UsbEndpoint((0x0a & 0x7F), false, 64);
pEpIn = new UsbEndpoint((0x8b & 0x7F), true, 64);
PRINT_Log("Voda K3760\r\n");
}
else //if ( ( m_vid == 0x12d1 ) && ( m_pid == 0x1003 ) )
/*{*/
if ( ( m_vid == 0x12d1 ) && ( m_pid == 0x1003 ) )
{
pEpOut = new UsbEndpoint((0x02 & 0x7F), false, 64);
pEpIn = new UsbEndpoint((0x82 & 0x7F), true, 64);
PRINT_Log("Huawei E220\r\n");
}
/*else
{
if(( m_vid == 0x12d1 ))
PRINT_Log("VID OK\r\n");
else
PRINT_Log("VID NOK\r\n");
if(( m_pid == 0x1003 ))
PRINT_Log("VID OK\r\n");
else
PRINT_Log("VID NOK\r\n");
PRINT_Log("\r\n....\r\n\r\n");
error("\r\n\r\n");
}*/
//}
#if 1
else /*if ( m_vid == 0x12d1 &&
m_pid == 0x1001 )*/
{
pEpOut = new UsbEndpoint((0x01 & 0x7F), false, 64);
pEpIn = new UsbEndpoint((0x82 & 0x7F), true, 64);
PRINT_Log("Huawei E1550\r\n");
}
#endif
PRINT_Log("Virtual Serial Port device %04x:%04x connected\n", m_vid, m_pid);
return (OK);
}
else if (ser_int_found==3) {
PRINT_Log("CDFS dongle connected, reset\n");
return (OK);
} else {
PRINT_Log("Not a Virtual Serial Port device\n");
return (ERR_NO_MS_INTERFACE);
}
}
USB_INT32S SerialRx( volatile USB_INT08U* buf, USB_INT32U len )
{
USB_INT32S rc;
rc = pEpIn->transfer(buf, len);
return rc;
}
USB_INT32S SerialReceived()
{
return pEpIn->status();
}
USB_INT32S SerialTx( volatile USB_INT08U* buf, USB_INT32U len )
{
USB_INT32S rc;
rc = pEpOut->transfer(buf, len);
// PRINT_Log("\r\nOut rc = %d\r\n",len);
return rc;
}
USB_INT32S SerialTransmitted()
{
USB_INT32S rc = pEpOut->status();
/* if(rc>=0)
{
PRINT_Log("\r\nTransmitted %d\r\n",rc);
}*/
return rc;
}
USB_INT32S SerialReg(USB_INT16U vid, USB_INT16U pid) {return 0;}
#endif