osc test

Dependencies:   EthernetNetIf mbed mbed

Fork of OSC by Toby Harris

Files at this revision

API Documentation at this revision

Comitter:
itotaka
Date:
Fri Oct 04 12:19:39 2013 +0000
Parent:
1:63b72e393989
Commit message:
to share

Changed in this revision

EthernetNetIf.lib Show annotated file Show diff for this revision Revisions of this file
example-processing.h Show diff for this revision Revisions of this file
example.h Show diff for this revision Revisions of this file
main.cpp Show annotated file Show diff for this revision Revisions of this file
mbed.bld Show annotated file Show diff for this revision Revisions of this file
mbed.lib Show annotated file Show diff for this revision Revisions of this file
mbedOSC.h Show annotated file Show diff for this revision Revisions of this file
diff -r 63b72e393989 -r b5af09b0d540 EthernetNetIf.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/EthernetNetIf.lib	Fri Oct 04 12:19:39 2013 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mamezu/code/EthernetNetIf/#0f6c82fcde82
diff -r 63b72e393989 -r b5af09b0d540 example-processing.h
--- a/example-processing.h	Fri Jul 26 22:10:20 2013 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,52 +0,0 @@
-/* EXAMPLE SEND/RECEIVE on PROCESSING:
-
-// oscP5sendreceive by andreas schlegel
-// example shows how to send and receive osc messages.
-// oscP5 website at http://www.sojamo.de/oscP5
-
-*/
-
-import oscP5.*;
-import netP5.*;
-
-OscP5 oscP5;
-NetAddress myRemoteLocation;
-
-void setup() {
-  size(400,400);
-  frameRate(25);
-  // start oscP5, listening for incoming messages at port 12000
-  oscP5 = new OscP5(this,12000);
-
-  // myRemoteLocation is a NetAddress. a NetAddress takes 2 parameters,
-  // an ip address and a port number. myRemoteLocation is used as parameter in
-  // oscP5.send() when sending osc packets to another computer, device,
-  // application. usage see below. for testing purposes the listening port
-  // and the port of the remote location address are the same, hence you will
-  // send messages back to this sketch.
-  myRemoteLocation = new NetAddress("10.0.0.2",10000);
-}
-
-
-void draw() {
-  background(0);
-}
-
-void mousePressed() {
-  // in the following different ways of creating osc messages are shown by example
-  OscMessage myMessage = new OscMessage("/mbed/test1");
-
-  myMessage.add(123); // add an int to the osc message
-
-  // send the message
-  oscP5.send(myMessage, myRemoteLocation);
-}
-
-
-// incoming osc message are forwarded to the oscEvent method.
-void oscEvent(OscMessage theOscMessage) {
-  // print the address pattern and the typetag of the received OscMessage
-  print("### received an osc message.");
-  print(" addrpattern: "+theOscMessage.addrPattern());
-  println(" typetag: "+theOscMessage.typetag());
-}
diff -r 63b72e393989 -r b5af09b0d540 example.h
--- a/example.h	Fri Jul 26 22:10:20 2013 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,117 +0,0 @@
-#include "mbed.h"
-#include "mbedOSC.h"
-
-//// ETHERNET
-
-// Ethernet can be created with *either* an address assigned by DHCP or a static IP address. Uncomment the define line for DHCP
-//#define DHCP
-#ifdef DHCP
-EthernetNetIf eth;
-#else
-EthernetNetIf eth(
-    IpAddr(10,0,0,2), //IP Address
-    IpAddr(255,255,255,0), //Network Mask
-    IpAddr(10,0,0,1), //Gateway
-    IpAddr(10,0,0,1)  //DNS
-);
-#endif
-
-//// OSC
-
-// The object to do the work of sending and receiving
-OSCClass osc;
-
-// The message objects to send and receive with
-OSCMessage recMes;
-OSCMessage sendMes;
-
-// Setting - The port we're listening to on the mbed for OSC messages
-int  mbedListenPort  = 10000;
-
-// Setting - The address and port we're going to send to, from the mbed
-uint8_t destIp[]  = { 10, 0, 0, 1};
-int  destPort = 12000;
-
-//// mbed input
-
-DigitalIn button(p21);
-bool buttonLastState;
-
-//// Our messageReceivedCallback function
-void processOSC() {
-
-    // If this function has been called, the OSC message just received will have been parsed into our recMes OSCMessage object
-    // Note we can access recMes here, outside of the main loop, as we created it as a global variable.
-
-    // TASK: If this message one we want, do something about it.
-    // In this example we're listening for messages with a top address of "mbed".
-    // Note the strcmp function returns 0 if identical, so !strcmp is true if the two strings are the same
-    if ( !strcmp( recMes.getAddress(0) , "mbed" ) ) {
-        printf("OSC Message received addressed to mbed \r\n");
-        if ( !strcmp( recMes.getAddress(1) , "test1" ) )
-            printf("Received subAddress= test1 \r\n");
-
-        // Send some osc message:
-        sendMes.setTopAddress("/working...");
-        osc.sendOsc(&sendMes);
-    }
-}
-
-////  M A I N
-int main() {
-
-    //// TASK: Set up the Ethernet port
-    printf("Setting up ethernet...\r\n");
-    EthernetErr ethErr = eth.setup();
-    if (ethErr) {
-        printf("Ethernet Failed to setup. Error: %d\r\n", ethErr);
-        return -1;
-    }
-    printf("Ethernet OK\r\n");
-
-    //// TASK: Set up OSC message sending
-
-    // In the OSC message container we've made for send messages, set where we want it to go:
-    sendMes.setIp( destIp );
-    sendMes.setPort( destPort );
-
-    //// TASK: Set up OSC message receiving
-
-    // In the OSC send/receive object...
-    // Set the OSC message container for it to parse received messages into
-    osc.setReceiveMessage(&recMes);
-
-    // Tell it to begin listening for OSC messages at the port specified (the IP address we know already, it's the mbed's!).
-    osc.begin(mbedListenPort);
-
-    // Rather than constantly checking to see whether there are new messages waiting, the object can call some code of ours to run when a message is received.
-    // This line does that, attaching a callback function we've written before getting to this point, in this case it's called processOSC
-    // For more info how this works, see http://mbed.org/cookbook/FunctionPointer
-    osc.messageReceivedCallback.attach(&processOSC);
-
-    //// TASK: Prime button change detection
-    buttonLastState = button;
-
-    //// TASK: GO!
-
-    // We've finished setting up, now loop this forever...
-    while (true) {
-        // This polls the network connection for new activity, without keeping on calling this you won't receive any OSC!
-        Net::poll();
-
-        // Has the button changed?
-        if (button != buttonLastState) {
-            // If so, lets update the lastState variable and then send an OSC message
-            buttonLastState = button;
-            
-            sendMes.setTopAddress("/mbed");
-            sendMes.setSubAddress("/button");
-            sendMes.setArgs("i", (long)button); // The payload will be the button state as an integer, ie. 0 or 1. We need to cast to 'long' for ints (and 'double' for floats).// The payload will be the button state as an integer, ie. 0 or 1. We need to cast to 'long' for ints (and 'double' for floats).
-            osc.sendOsc(&sendMes);
-            
-            printf("Sent OSC message /mbed/button \r\n");
-        }
-
-        // ... Do whatever needs to be done by your mbed otherwise. If an OSC message is received, your messageReceivedCallback will run (in this case, processOSC()).
-    }
-}
\ No newline at end of file
diff -r 63b72e393989 -r b5af09b0d540 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Fri Oct 04 12:19:39 2013 +0000
@@ -0,0 +1,126 @@
+#include "mbed.h"
+#include "mbedOSC.h"
+
+//// ETHERNET
+
+// Ethernet can be created with *either* an address assigned by DHCP or a static IP address. Uncomment the define line for DHCP
+//#define DHCP
+#ifdef DHCP
+EthernetNetIf eth;
+#else
+EthernetNetIf eth(
+    IpAddr(10,0,0,2), //IP Address
+    IpAddr(255,255,255,0), //Network Mask
+    IpAddr(10,0,0,1), //Gateway
+    IpAddr(10,0,0,1)  //DNS
+);
+#endif
+
+//// OSC
+
+// The object to do the work of sending and receiving
+OSCClass osc;
+
+// The message objects to send and receive with
+OSCMessage recMes;
+OSCMessage sendMes;
+
+// Setting - The port we're listening to on the mbed for OSC messages
+int  mbedListenPort  = 10000;
+
+// Setting - The address and port we're going to send to, from the mbed
+uint8_t destIp[]  = { 10, 0, 0, 5};
+int  destPort = 12000;
+
+//// mbed input
+
+DigitalIn button(p21);
+bool buttonLastState;
+
+//// Our messageReceivedCallback function
+void processOSC() {
+
+    // If this function has been called, the OSC message just received will have been parsed into our recMes OSCMessage object
+    // Note we can access recMes here, outside of the main loop, as we created it as a global variable.
+
+    // TASK: If this message one we want, do something about it.
+    // In this example we're listening for messages with a top address of "mbed".
+    // Note the strcmp function returns 0 if identical, so !strcmp is true if the two strings are the same
+    if ( !strcmp( recMes.getAddress(0) , "mbed" ) ) {
+        printf("OSC Message received addressed to mbed \r\n");
+        if ( !strcmp( recMes.getAddress(1) , "test1" ) )
+            printf("Received subAddress= test1 \r\n");
+            
+            int na = recMes.getArgNum();
+            printf("numArgs: %d \r\n", na);
+            
+            for (int i = 0; i < na; i++) {
+                int v = recMes.getArgInt(i);
+                printf("%d, \r\n", v);
+            }
+                               
+        // Send some osc message:
+        sendMes.setTopAddress("/working...");
+//        sendMes.setArgs("i", &v1);
+        osc.sendOsc(&sendMes);
+    }
+}
+
+////  M A I N
+int main() {
+
+    //// TASK: Set up the Ethernet port
+    printf("Setting up ethernet...\r\n");
+    EthernetErr ethErr = eth.setup();
+    if (ethErr) {
+        printf("Ethernet Failed to setup. Error: %d\r\n", ethErr);
+        return -1;
+    }
+    printf("Ethernet OK\r\n");
+
+    //// TASK: Set up OSC message sending
+
+    // In the OSC message container we've made for send messages, set where we want it to go:
+    sendMes.setIp( destIp );
+    sendMes.setPort( destPort );
+
+    //// TASK: Set up OSC message receiving
+
+    // In the OSC send/receive object...
+    // Set the OSC message container for it to parse received messages into
+    osc.setReceiveMessage(&recMes);
+
+    // Tell it to begin listening for OSC messages at the port specified (the IP address we know already, it's the mbed's!).
+    osc.begin(mbedListenPort);
+
+    // Rather than constantly checking to see whether there are new messages waiting, the object can call some code of ours to run when a message is received.
+    // This line does that, attaching a callback function we've written before getting to this point, in this case it's called processOSC
+    // For more info how this works, see http://mbed.org/cookbook/FunctionPointer
+    osc.messageReceivedCallback.attach(&processOSC);
+
+    //// TASK: Prime button change detection
+    buttonLastState = button;
+
+    //// TASK: GO!
+
+    // We've finished setting up, now loop this forever...
+    while (true) {
+        // This polls the network connection for new activity, without keeping on calling this you won't receive any OSC!
+        Net::poll();
+
+        // Has the button changed?
+        if (button != buttonLastState) {
+            // If so, lets update the lastState variable and then send an OSC message
+            buttonLastState = button;
+            
+            sendMes.setTopAddress("/mbed");
+            sendMes.setSubAddress("/button");
+            sendMes.setArgs("i", (long)button); // The payload will be the button state as an integer, ie. 0 or 1. We need to cast to 'long' for ints (and 'double' for floats).// The payload will be the button state as an integer, ie. 0 or 1. We need to cast to 'long' for ints (and 'double' for floats).
+            osc.sendOsc(&sendMes);
+            
+            printf("Sent OSC message /mbed/button \r\n");
+        }
+
+        // ... Do whatever needs to be done by your mbed otherwise. If an OSC message is received, your messageReceivedCallback will run (in this case, processOSC()).
+    }
+}
\ No newline at end of file
diff -r 63b72e393989 -r b5af09b0d540 mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Fri Oct 04 12:19:39 2013 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/
\ No newline at end of file
diff -r 63b72e393989 -r b5af09b0d540 mbed.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.lib	Fri Oct 04 12:19:39 2013 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/itotaka/code/mbed/#b749145a7bb1
diff -r 63b72e393989 -r b5af09b0d540 mbedOSC.h
--- a/mbedOSC.h	Fri Jul 26 22:10:20 2013 +0000
+++ b/mbedOSC.h	Fri Oct 04 12:19:39 2013 +0000
@@ -27,7 +27,7 @@
 
 
 #define MAX_ADDRESS    2
-#define MAX_ARG        2
+#define MAX_ARG        80
 
 #define TYPE_INT    1
 #define TYPE_FLOAT    2