NXP's driver library for LPC17xx, ported to mbed's online compiler. Not tested! I had to fix a lot of warings and found a couple of pretty obvious bugs, so the chances are there are more. Original: http://ics.nxp.com/support/documents/microcontrollers/zip/lpc17xx.cmsis.driver.library.zip
Diff: source/lpc17xx_wdt.c
- Revision:
- 0:1063a091a062
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/source/lpc17xx_wdt.c Wed Feb 17 16:22:39 2010 +0000 @@ -0,0 +1,266 @@ +/** + * @file : lpc17xx_wdt.c + * @brief : Contains all functions support for WDT firmware library on LPC17xx + * @version : 1.0 + * @date : 9. April. 2009 + * @author : HieuNguyen + ************************************************************************** + * Software that is described herein is for illustrative purposes only + * which provides customers with programming information regarding the + * products. This software is supplied "AS IS" without any warranties. + * NXP Semiconductors assumes no responsibility or liability for the + * use of the software, conveys no license or title under any patent, + * copyright, or mask work right to the product. NXP Semiconductors + * reserves the right to make changes in the software without + * notification. NXP Semiconductors also make no representation or + * warranty that such application will be suitable for the specified + * use without further testing or modification. + **********************************************************************/ + +/* Peripheral group ----------------------------------------------------------- */ +/** @addtogroup WDT + * @{ + */ + +/* Includes ------------------------------------------------------------------- */ +#include "lpc17xx_wdt.h" +#include "lpc17xx_clkpwr.h" +#include "lpc17xx_pinsel.h" + + +/* If this source file built with example, the LPC17xx FW library configuration + * file in each example directory ("lpc17xx_libcfg.h") must be included, + * otherwise the default FW library configuration file must be included instead + */ +#ifdef __BUILD_WITH_EXAMPLE__ +#include "lpc17xx_libcfg.h" +#else +#include "lpc17xx_libcfg_default.h" +#endif /* __BUILD_WITH_EXAMPLE__ */ + + +#ifdef _WDT + +/* Private Functions ---------------------------------------------------------- */ +/** @defgroup WDT_Private_Functions + * @{ + */ + +/********************************************************************//** + * @brief Set WDT time out value and WDT mode + * @param[in] clk_source select Clock source for WDT device + * @param[in] timeout value of time-out for WDT (us) + * @return None + *********************************************************************/ +uint8_t WDT_SetTimeOut (uint8_t clk_source, uint32_t timeout) +{ + + uint32_t pclk_wdt = 0; + uint32_t tempval = 0; + + switch ((WDT_CLK_OPT) clk_source) + { + case WDT_CLKSRC_IRC: + pclk_wdt = 4000000; + // Calculate TC in WDT + tempval = (((pclk_wdt) / WDT_US_INDEX) * (timeout / 4)); + // Check if it valid + if ((tempval >= WDT_TIMEOUT_MIN) && (tempval <= WDT_TIMEOUT_MAX)) + { + LPC_WDT->WDTC = tempval; + return SUCCESS; + } + + break; + + case WDT_CLKSRC_PCLK: + + // Get WDT clock with CCLK divider = 4 + pclk_wdt = SystemCoreClock / 4; + // Calculate TC in WDT + tempval = (((pclk_wdt) / WDT_US_INDEX) * (timeout / 4)); + + if ((tempval >= WDT_TIMEOUT_MIN) && (tempval <= WDT_TIMEOUT_MAX)) + { + CLKPWR_SetPCLKDiv (CLKPWR_PCLKSEL_WDT, CLKPWR_PCLKSEL_CCLK_DIV_4); + LPC_WDT->WDTC = (uint32_t) tempval; + return SUCCESS; + } + + // Get WDT clock with CCLK divider = 2 + pclk_wdt = SystemCoreClock / 2; + // Calculate TC in WDT + tempval = (((pclk_wdt) / WDT_US_INDEX) * (timeout / 4)); + + if ((tempval >= WDT_TIMEOUT_MIN) && (tempval <= WDT_TIMEOUT_MAX)) + { + CLKPWR_SetPCLKDiv (CLKPWR_PCLKSEL_WDT, CLKPWR_PCLKSEL_CCLK_DIV_2); + LPC_WDT->WDTC = (uint32_t) tempval; + return SUCCESS; + } + + // Get WDT clock with CCLK divider = 1 + pclk_wdt = SystemCoreClock; + // Calculate TC in WDT + tempval = (((pclk_wdt) / WDT_US_INDEX) * (timeout / 4)); + + if ((tempval >= WDT_TIMEOUT_MIN) && (tempval <= WDT_TIMEOUT_MAX)) + { + CLKPWR_SetPCLKDiv (CLKPWR_PCLKSEL_WDT, CLKPWR_PCLKSEL_CCLK_DIV_1); + LPC_WDT->WDTC = (uint32_t) tempval; + return SUCCESS; + } + break ; + + + case WDT_CLKSRC_RTC: + pclk_wdt = 32768; + // Calculate TC in WDT + tempval = (((pclk_wdt) / WDT_US_INDEX) * (timeout / 4)); + // Check if it valid + if ((tempval >= WDT_TIMEOUT_MIN) && (tempval <= WDT_TIMEOUT_MAX)) + { + LPC_WDT->WDTC = (uint32_t) tempval; + return SUCCESS; + } + + break; + +// Error parameter + default: + break; +} + + return ERROR; +} + +/** + * @} + */ + + +/* Public Functions ----------------------------------------------------------- */ +/** @addtogroup WDT_Public_Functions + * @{ + */ + + +/*********************************************************************//** +* @brief Initial for Watchdog function +* Clock source = RTC , +* +* @param[in] ClkSrc Select clock source +* - 0:Clock source from Internal RC oscillator +* - 1: Selects the APB peripheral clock (PCLK) +* - 2:Selects the RTC oscillator +* +* @param[in] WDTMode WDT mode +* - 0: Use WDT to generate interrupt only +* - 1:WDT_MODE_RESET +* @return None + **********************************************************************/ +void WDT_Init (uint32_t ClkSrc, uint32_t WDTMode) +{ + CHECK_PARAM(PARAM_WDT_CLK_OPT(ClkSrc)); + CHECK_PARAM(PARAM_WDT_MODE_OPT(WDTMode)); + CLKPWR_SetPCLKDiv (CLKPWR_PCLKSEL_WDT, CLKPWR_PCLKSEL_CCLK_DIV_4); + + //Set clock source + LPC_WDT->WDCLKSEL &= ~WDT_WDCLKSEL_MASK; + LPC_WDT->WDCLKSEL |= ClkSrc; + //Set WDT mode + if (WDTMode == WDT_MODE_RESET){ + LPC_WDT->WDMOD |= WDT_WDMOD_WDRESET; + } +} + +/*********************************************************************//** +* @brief Start WDT activity with given timeout value +* @param[in] TimeOut WDT reset after timeout if it is not feed +* @return None + **********************************************************************/ +void WDT_Start(uint32_t TimeOut) +{ + uint32_t ClkSrc; + + ClkSrc = LPC_WDT->WDCLKSEL; + ClkSrc &=WDT_WDCLKSEL_MASK; + WDT_SetTimeOut(ClkSrc,TimeOut); + //enable watchdog + LPC_WDT->WDMOD |= WDT_WDMOD_WDEN; + WDT_Feed(); +} + +/********************************************************************//** + * @brief Read WDT Time out flag + * @param[in] None + * @return Time out flag status of WDT + *********************************************************************/ +FlagStatus WDT_ReadTimeOutFlag (void) +{ + return ((LPC_WDT->WDMOD & WDT_WDMOD_WDTOF) != 0) ? SET : RESET; +} + +/********************************************************************//** + * @brief Clear WDT Time out flag + * @param[in] None + * @return None + *********************************************************************/ +void WDT_ClrTimeOutFlag (void) +{ + LPC_WDT->WDMOD &=~WDT_WDMOD_WDTOF; +} + +/********************************************************************//** + * @brief Update WDT timeout value and feed + * @param[in] TimeOut TimeOut value to be updated + * @return None + *********************************************************************/ +void WDT_UpdateTimeOut ( uint32_t TimeOut) +{ + uint32_t ClkSrc; + ClkSrc = LPC_WDT->WDCLKSEL; + ClkSrc &=WDT_WDCLKSEL_MASK; + WDT_SetTimeOut(ClkSrc,TimeOut); + WDT_Feed(); +} + + +/********************************************************************//** + * @brief After set WDTEN, call this function to start Watchdog + * or reload the Watchdog timer + * @param[in] None + * + * @return None + *********************************************************************/ +void WDT_Feed (void) +{ + // Disable irq interrupt + __disable_irq(); + LPC_WDT->WDFEED = 0xAA; + LPC_WDT->WDFEED = 0x55; + // Then enable irq interrupt + __enable_irq(); +} + +/********************************************************************//** + * @brief Get the current value of WDT + * @param[in] None + * @return current value of WDT + *********************************************************************/ +uint32_t WDT_GetCurrentCount(void) +{ + return LPC_WDT->WDTV; +} + +/** + * @} + */ + +#endif /* _WDT */ + +/** + * @} + */ + +/* --------------------------------- End Of File ------------------------------ */