Diff: CyclesSync.h

Revision:

0:8ad47e2b6f00

Child:

21:bc8c1cec3da6

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/CyclesSync.h	Sat Jan 30 13:00:39 2016 +0000
@@ -0,0 +1,92 @@
+/**--------------File Info---------------------------------------------------------------------------------
+** File name:           CycleSync.h
+** Last modified Date:  2011-09-06
+** Last Version:        V1.00
+** Descriptions:        
+**
+**--------------------------------------------------------------------------------------------------------
+** Created by:          Electrooptica Inc.
+** Created date:        2011-09-06
+** Version:             V1.00
+** Descriptions:        There is the routines for device synchronization
+**
+**--------------------------------------------------------------------------------------------------------       
+*********************************************************************************************************/
+#include "LPC17xx.h"
+#include "CntrlGLD.h"
+
+//#define 	PERFOMANCE
+
+#define	DEVICE_SAMPLE_RATE_HZ		10000		//e. sampling frequency 10 kHz //r. ������� ������������� 10 ���
+#define	DEVICE_SAMPLE_RATE_uks		100000000		//e. sampling frequency 10 kHz //r. ������� ������������� 10 ���
+#define DELAY_UART_ENBL				4000			//e. delay = DELAY_UART_ENBL*8/CLCK
+#define DELAY_UART_DISBL			2500			//e. delay = DELAY_UART_ENBL*8/CLCK
+#define RATE_REPER_OR_REFMEANDR 	0x0000		//e. difference of general counters (not dither counters), latched by Reper or by Sign Meander //r. �������� ������� ��������� (�� �������), ����������� �� Reper`� ��� �� RefMeandr`�
+#define RATE_VIBRO_1	 			0x0001      //e. difference of dither counters after the filter of moving average //r. �������� �������������� ����� ������� ������.��������
+
+#define  HALF_PERIOD				0x00000004
+#define  WHOLE_PERIOD				0x00000008
+#define  RESET_PERIOD				0x0000000C
+//-----------------------------PWM Registers----------------------------------------
+
+#define TCR_CNT_EN		0x00000001
+#define TCR_RESET		0x00000002
+#define TCR_PWM_EN		0x00000008
+
+#define PWMMR0I			(1 << 0)
+#define PWMMR0R			(1 << 1)
+#define PWMMR0S			(1 << 2)
+#define PWMENA1			(1 << 9)
+#define LER0_EN			(1 << 0)
+
+//-----------------------Drive cycle registers------------------------------------
+#define MR0_RESET		0x00000002
+#define MR1_RESET		0x00000010
+#define MR1_STOP		0x00000020
+#define MR0_STOP		0x00000004
+#define MR0_NO_STOP		0x00000000
+#define MR0_INT_EN		0x00000001
+#define SYNC_CLCK4		0xffff3fff
+#define SYNC_CLCK		0xfffffff
+
+//------------------------WDT registers--------------------------------------------
+#define WDEN		(0x1<<0)
+#define WDRESET		(0x1<<1)
+#define WDTOF		(0x1<<2)
+#define WDINT		(0x1<<3)
+#define WDT_FEED_VALUE	0x003FFFFF
+
+extern uint32_t		WDTInit( void );
+extern void 		WDTFeed( void );
+extern uint32_t 	Sys_Clock; 
+extern  int32_t 	time_1_Sec;
+extern uint32_t  	trm_cycl;
+extern  int32_t 	PrevPeriod;	
+extern uint32_t 	Ext_Latch_ResetEnable;
+extern volatile uint32_t		Latch_Rdy;
+extern volatile uint32_t		data_Rdy;
+extern  int32_t  	LatchPhase;
+extern uint32_t		PeriodElapsed;
+extern uint32_t		count;
+extern uint32_t main_cycle_latch; 
+extern uint32_t Out_main_cycle_latch; //e. counter of main cycles between external latch pulse appearence
+extern uint32_t T_latch, Out_T_latch, temp_T_latch;
+
+extern void CounterIquiryCycle_Init(uint32_t);
+extern void ExtLatch_Init(void);
+extern void IntLatch_Init(void);
+extern void Latch_Event(void);
+extern void SetIntLatch(uint32_t);
+extern void SwitchRefMeandInt(uint32_t);
+extern int SwitchMode(void);
+
+#if defined PERFOMANCE
+	void IntLatch(void);
+#endif
+
+void ServiceTime(void);
+
+/*****************************************************************************
+**                            End Of File
+******************************************************************************/
+