123
Fork of LG by
Diff: host/Source/App/config.h
- Revision:
- 22:12e6183f04d4
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/host/Source/App/config.h Wed Feb 03 10:44:42 2016 +0300 @@ -0,0 +1,98 @@ +#ifndef CONFIG +#define CONFIG + + +#define DEBUG + +//========== device selection ========================== +#define GLD_DEVICE +//#define OID_DEVICE +//#define OID_RF_DEVICE +//====================================================== +#define COMMAND_DEBUG + +#if defined(GLD_DEVICE) + #define FIRMWARE_VER 0xD // 9.13 - firmware version + #define NEW_THERMO_ADC + #define CONFIG_HFO_REG +// #define DELTA_SF_DELAY + #define CONFIG_PLC_SINUS +// #define CONFIG_HW_PLC + //#define CONFIG_SIMUL_HW_PLC // simulation of part of PLC regulator in FPGA + #define CONFIG_PLC_LIDEM // PLC reg. works with demodulated LI signal (demodulation in analog IC) +// #define CONFIG_PLC_LIM // PLC reg. works with modulated LI signal (demodulation inside FPGA) + #define WP_TRANSITION_ENA //e. allow the linear transition process for PLC reset //r. ðàçðåøåí ëèíåéíûé ïåðåõîäíîé ïðîöåññ ïðè îáíóëåíèè ÑÐÏ + + #define CONFIG_HFO_MOV_AVER_FILTER + + #define CONFIG_SIX_THERMO_SENSORS + + #define DEBUG_EXT_LAT_CNTR + + //#warning "=== GLD_DEVICE configuration selected ===" + +#elif defined(OID_DEVICE) + #define FIRMWARE_VER 0x1C // 1.12 - firmware version + + #define CONFIG_CURRENT_REG +// #define CONFIG_IA_STABILIZING + #define CONFIG_LI_STABILIZING +// #define CONFIG_IB_EQUAL_IA + #define CONFIG_IB_IA_BALANCE + + #define CONFIG_HW_PLC +// #define CONFIG_PLC_LIDEM // PLC reg. works with demodulated LI signal (demodulation in analog IC) + #define CONFIG_PLC_LIM // PLC reg. works with modulated LI signal (demodulation inside FPGA) + //#define CONFIG_SIMUL_HW_PLC // simulation of part of PLC regulator in FPGA + #define WP_TRANSITION_ENA //e. allow the linear transition process for PLC reset //r. ðàçðåøåí ëèíåéíûé ïåðåõîäíîé ïðîöåññ ïðè îáíóëåíèè ÑÐÏ + + //#warning "=== OID_DEVICE configuration selected ===" + +#elif defined(OID_RF_DEVICE) + #define FIRMWARE_VER 0x1C // 1.12 - firmware version + + #define CONFIG_HFO_REG + + #define CONFIG_HW_PLC +// #define CONFIG_PLC_LIDEM // PLC reg. works with demodulated LI signal (demodulation in analog IC) + #define CONFIG_PLC_LIM // PLC reg. works with modulated LI signal (demodulation inside FPGA) + + //#warning "=== OID_RF_DEVICE configuration selected ===" + +#else + #error "Not defined Device type" +#endif + +// -------- conditional compiles errors messages --------------------------- +#if !(defined(GLD_DEVICE) ^ defined(OID_DEVICE) ^ defined(OID_RF_DEVICE)) + #error "Should be defined only one device, not several" +#endif + +#if defined(CONFIG_PLC_LIDEM) & defined(CONFIG_PLC_LIM) + #error "Should be defined CONFIG_PLC_LIDEM or CONFIG_PLC_LIM, not both" +#endif + +#if !( defined(CONFIG_PLC_LIDEM) | defined(CONFIG_PLC_LIM) ) + #error "Not defined PLC mode: modulated / demodulated" +#endif + +#if defined(OID_DEVICE) +#if defined(CONFIG_IA_STABILIZING) & defined(CONFIG_LI_STABILIZING) + #error "Should be defined CONFIG_IA_STABILIZING or CONFIG_LI_STABILIZING, not both" +#endif + +#if !( defined(CONFIG_IA_STABILIZING) | defined(CONFIG_LI_STABILIZING) ) + #error "Not defined IA regulator mode: select CONFIG_IA_STABILIZING or CONFIG_LI_STABILIZING" +#endif + +#if defined(CONFIG_IB_EQUAL_IA) & defined(CONFIG_IB_IA_BALANCE) + #error "Should be defined CONFIG_IB_EQUAL_IA or CONFIG_IB_IA_BALANCE, not both" +#endif + +#if !( defined(CONFIG_IB_EQUAL_IA) | defined(CONFIG_IB_IA_BALANCE) ) + #error "Not defined IB regulator mode: select CONFIG_IB_EQUAL_IA or CONFIG_IB_IA_BALANCE" +#endif +#endif // OID_DEVICE + +#endif +