Diff: targets/TARGET_STM/TARGET_STM32F2/pin_device.h

Revision:

160:d5399cc887bb

diff -r 612c381a210f -r d5399cc887bb targets/TARGET_STM/TARGET_STM32F2/pin_device.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_STM/TARGET_STM32F2/pin_device.h	Tue Mar 14 16:40:56 2017 +0000
@@ -0,0 +1,139 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PIN_DEVICE_H
+#define MBED_PIN_DEVICE_H
+
+#include "cmsis.h"
+
+// when LL is available, below include can be used
+// #include "stm32f2xx_ll_gpio.h"
+// until then let's define locally the required functions
+#define LL_GPIO_PIN_0                      GPIO_BSRR_BS0 /*!< Select pin 0 */
+#define LL_GPIO_PIN_1                      GPIO_BSRR_BS1 /*!< Select pin 1 */
+#define LL_GPIO_PIN_2                      GPIO_BSRR_BS2 /*!< Select pin 2 */
+#define LL_GPIO_PIN_3                      GPIO_BSRR_BS3 /*!< Select pin 3 */
+#define LL_GPIO_PIN_4                      GPIO_BSRR_BS4 /*!< Select pin 4 */
+#define LL_GPIO_PIN_5                      GPIO_BSRR_BS5 /*!< Select pin 5 */
+#define LL_GPIO_PIN_6                      GPIO_BSRR_BS6 /*!< Select pin 6 */
+#define LL_GPIO_PIN_7                      GPIO_BSRR_BS7 /*!< Select pin 7 */
+#define LL_GPIO_PIN_8                      GPIO_BSRR_BS8 /*!< Select pin 8 */
+#define LL_GPIO_PIN_9                      GPIO_BSRR_BS9 /*!< Select pin 9 */
+#define LL_GPIO_PIN_10                     GPIO_BSRR_BS10 /*!< Select pin 10 */
+#define LL_GPIO_PIN_11                     GPIO_BSRR_BS11 /*!< Select pin 11 */
+#define LL_GPIO_PIN_12                     GPIO_BSRR_BS12 /*!< Select pin 12 */
+#define LL_GPIO_PIN_13                     GPIO_BSRR_BS13 /*!< Select pin 13 */
+#define LL_GPIO_PIN_14                     GPIO_BSRR_BS14 /*!< Select pin 14 */
+#define LL_GPIO_PIN_15                     GPIO_BSRR_BS15 /*!< Select pin 15 */
+
+#define LL_GPIO_MODE_INPUT                 ((uint32_t)0x00000000U) /*!< Select input mode */
+#define LL_GPIO_MODE_OUTPUT                GPIO_MODER_MODE0_0  /*!< Select output mode */
+#define LL_GPIO_MODE_ALTERNATE             GPIO_MODER_MODE0_1  /*!< Select alternate function mode */
+#define LL_GPIO_MODE_ANALOG                GPIO_MODER_MODE0    /*!< Select analog mode */
+
+#define LL_GPIO_OUTPUT_PUSHPULL            ((uint32_t)0x00000000U) /*!< Select push-pull as output type */
+#define LL_GPIO_OUTPUT_OPENDRAIN           GPIO_OTYPER_OT0 /*!< Select open-drain as output type */
+
+#define LL_GPIO_PULL_NO                    ((uint32_t)0x00000000U) /*!< Select I/O no pull */
+#define LL_GPIO_PULL_UP                    GPIO_PUPDR_PUPD0_0 /*!< Select I/O pull up */
+#define LL_GPIO_PULL_DOWN                  GPIO_PUPDR_PUPD0_1 /*!< Select I/O pull down */
+
+#define LL_GPIO_SPEED_FREQ_LOW             ((uint32_t)0x00000000U) /*!< Select I/O low output speed    */
+#define LL_GPIO_SPEED_FREQ_MEDIUM          GPIO_OSPEEDER_OSPEEDR0_0 /*!< Select I/O medium output speed */
+#define LL_GPIO_SPEED_FREQ_HIGH            GPIO_OSPEEDER_OSPEEDR0_1 /*!< Select I/O fast output speed   */
+#define LL_GPIO_SPEED_FREQ_VERY_HIGH       GPIO_OSPEEDER_OSPEEDR0   /*!< Select I/O high output speed   */
+
+__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
+{
+  MODIFY_REG(GPIOx->AFR[0], (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U)),
+             (Alternate << (POSITION_VAL(Pin) * 4U)));
+}
+
+__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
+{
+  MODIFY_REG(GPIOx->AFR[1], (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U)),
+             (Alternate << (POSITION_VAL(Pin >> 8U) * 4U)));
+}
+__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode)
+{
+  MODIFY_REG(GPIOx->MODER, (GPIO_MODER_MODE0 << (POSITION_VAL(Pin) * 2U)), (Mode << (POSITION_VAL(Pin) * 2U)));
+}
+__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+  return (uint32_t)(READ_BIT(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODER0)) / (Pin * Pin));
+}
+__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull)
+{
+  MODIFY_REG(GPIOx->PUPDR, (GPIO_PUPDR_PUPD0 << (POSITION_VAL(Pin) * 2U)), (Pull << (POSITION_VAL(Pin) * 2U)));
+}
+__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType)
+{
+  MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType));
+}
+__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t  Speed)
+{
+  MODIFY_REG(GPIOx->OSPEEDR, (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U)),
+             (Speed << (POSITION_VAL(Pin) * 2U)));
+}
+// Above lines shall be defined in LL when available
+
+extern const uint32_t ll_pin_defines[16];
+
+/* Family specific implementations */
+static inline void stm_pin_DisconnectDebug(PinName pin)
+{
+    /* empty for now */
+}
+
+static inline void stm_pin_PullConfig(GPIO_TypeDef *gpio, uint32_t ll_pin, uint32_t pull_config)
+{
+    switch (pull_config) {
+        case GPIO_PULLUP:
+            LL_GPIO_SetPinPull(gpio, ll_pin, LL_GPIO_PULL_UP);
+            break;
+        case GPIO_PULLDOWN:
+            LL_GPIO_SetPinPull(gpio, ll_pin, LL_GPIO_PULL_DOWN);
+            break;
+        default:
+            LL_GPIO_SetPinPull(gpio, ll_pin, LL_GPIO_PULL_NO);
+            break;
+    }
+}
+
+static inline void stm_pin_SetAFPin( GPIO_TypeDef *gpio, PinName pin, uint32_t afnum)
+{
+    uint32_t ll_pin  = ll_pin_defines[STM_PIN(pin)];
+
+    if (STM_PIN(pin) > 7)
+        LL_GPIO_SetAFPin_8_15(gpio, ll_pin, afnum);
+    else
+        LL_GPIO_SetAFPin_0_7(gpio, ll_pin, afnum);
+}
+
+#endif