Iftikhar Aziz
4545
Fork of
mbed-dev
by 
Umar Naeem
Diff: targets/TARGET_ONSEMI/TARGET_NCS36510/Pad.c
- Revision:
- 149:156823d33999
- Child:
- 150:02e0a0aed4ec
diff -r 21d94c44109e -r 156823d33999 targets/TARGET_ONSEMI/TARGET_NCS36510/Pad.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_ONSEMI/TARGET_NCS36510/Pad.c Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,146 @@
+#ifdef REVD
+/**
+******************************************************************************
+* @file pad.c
+* @brief PAD management support code
+* @internal
+* @author ON Semiconductor
+* $Rev: 2848 $
+* $Date: 2014-04-01 22:48:18 +0530 (Tue, 01 Apr 2014) $
+******************************************************************************
+ * Copyright 2016 Semiconductor Components Industries LLC (d/b/a ON Semiconductor).
+ * All rights reserved. This software and/or documentation is licensed by ON Semiconductor
+ * under limited terms and conditions. The terms and conditions pertaining to the software
+ * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf
+ * (ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software) and
+ * if applicable the software license agreement. Do not use this software and/or
+ * documentation unless you have carefully read and you agree to the limited terms and
+ * conditions. By using this software and/or documentation, you agree to the limited
+ * terms and conditions.
+*
+* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+* ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL,
+* INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+* @endinternal
+*
+* @ingroup pad
+*
+* @details
+*/
+
+/*************************************************************************************************
+* *
+* Header files *
+* *
+*************************************************************************************************/
+
+#include "memory_map.h"
+#include "pad_map.h"
+#include "clock.h"
+
+/*************************************************************************************************
+* *
+* Symbolic Constants *
+* *
+*************************************************************************************************/
+#define PAD_CTRL_OP_DRIVE_STRENGTH_MASK (uint32_t)0x1C
+#define PAD_NUM_OF_IO 17
+#define PAD_OP_DRIVE_STRGTH_MAX 7
+#define PAD_OP_DRIVE_TYPE_MAX 1
+#define PAD_OP_PULL_TYPE_MAX 3
+
+#define PAD_REG_ADRS_BYTE_SIZE 4
+
+#define PAD_OP_DRIVE_STRGTH_BIT_POS 2
+#define PAD_OP_DRIVE_TYPE_BIT_POS 5
+#define PAD_OP_PULL_TYPE_BIT_POS 0
+
+/*************************************************************************************************
+* *
+* Global variables *
+* *
+*************************************************************************************************/
+
+/* Peripheral PAD register mutex */
+/* sem_pt GlobMutexPadReg; */
+
+/*************************************************************************************************
+* *
+* Functions *
+* *
+*************************************************************************************************/
+
+/** Find description at pad.h */
+void fPadInit()
+{
+ /** - Enable the clock for PAD peripheral device */
+ CLOCK_ENABLE(CLOCK_PAD);
+
+ /** - Set pad parameters, output drive strength, pull piece control, output drive type */
+ PADREG->PADIO0.WORD = PAD_OUTPUT_PN_L1_OD; /* UART1 TXD */
+ PADREG->PADIO1.WORD = PAD_INPUT_PD_L1_PP; /* UART1 RXD */
+ PADREG->PADIO2.WORD = PAD_INPUT_PD_L1_PP; /* UART1 CTS */
+ PADREG->PADIO3.WORD = PAD_OUTPUT_PN_L1_OD; /* UART1 RTS */
+ PADREG->PADIO4.WORD = PAD_UNUSED_PD_L0_PP;
+ PADREG->PADIO5.WORD = PAD_UNUSED_PD_L0_PP;
+ PADREG->PADIO6.WORD = PAD_UNUSED_PD_L0_PP;
+ PADREG->PADIO7.WORD = PAD_UNUSED_PD_L0_PP;
+ PADREG->PADIO8.WORD = PAD_OUTPUT_PN_L1_OD; /* UART2 TXD */
+ PADREG->PADIO9.WORD = PAD_INPUT_PD_L1_PP; /* UART2 RXD */
+ PADREG->PADIO10.WORD = PAD_UNUSED_PD_L0_PP;
+ PADREG->PADIO11.WORD = PAD_INPUT_PD_L1_PP; /* SWO */
+ PADREG->PADIO12.WORD = PAD_INPUT_PD_L1_PP; /* SWCLK */
+ PADREG->PADIO13.WORD = PAD_INPUT_PD_L1_PP; /* SWDIO */
+ PADREG->PADIO14.WORD = PAD_INPUT_PD_L1_PP;
+ PADREG->PADIO15.WORD = PAD_UNUSED_PD_L0_PP;
+ PADREG->PADIO16.WORD = PAD_UNUSED_PD_L0_PP;
+ PADREG->PADIO17.WORD = PAD_UNUSED_PD_L0_PP;
+
+ /** - Disable the clock for PAD peripheral device */
+ CLOCK_DISABLE(CLOCK_PAD);
+
+}
+
+/** Find description at pad.h */
+boolean fPadIOCtrl(uint8_t PadNum, uint8_t OutputDriveStrength, uint8_t OutputDriveType, uint8_t PullType)
+{
+ PadReg_t *PadRegOffset;
+ /** \verbatim
+ Table: O/p drive strength
+
+ Drive strength 3.3V (min/typ/max) 1V (min/typ/max)
+ 000 1/1.4/2.1 mA 0.043/0.07/0.11 mA
+ 001 2/2.7/4.1 mA 0.086/0.15/0.215 mA
+ 010 4.1/5.3/7.8 mA 0.188/0.3/0.4 mA
+ 011 8.1/10.4/15 8 mA 0.4/0.6/0.81 mA
+ 100 20.8/26/37 mA* 1/1.6/2.2 mA
+ 101 40.5/50/70 mA* 2/3/4.3 mA
+ 11x 57/73/102 mA* 3/4.6/6.2 mA
+
+ *Values are only accessible when CDBGPWRUPREQ is high. This limits the maximum output current in functional mode. \endverbatim */
+
+
+ if((PadNum <= PAD_NUM_OF_IO) &&
+ (OutputDriveStrength <= PAD_OP_DRIVE_STRGTH_MAX) &&
+ (OutputDriveType <= PAD_OP_DRIVE_TYPE_MAX) && (PullType <= PAD_OP_PULL_TYPE_MAX)) {
+ /** - Get PAD IO register address for the PAD number */
+ PadRegOffset = (PadReg_t*)(PADREG_BASE + (PadNum * PAD_REG_ADRS_BYTE_SIZE));
+
+ /** - Enable the clock for PAD peripheral device */
+ CLOCK_ENABLE(CLOCK_PAD);
+
+ /** - Set drive type, pulltype & drive strength */
+ PadRegOffset->PADIO0.WORD = (uint32_t)((PullType << PAD_OP_PULL_TYPE_BIT_POS) |
+ (OutputDriveStrength << PAD_OP_DRIVE_STRGTH_BIT_POS) |
+ (OutputDriveType << PAD_OP_DRIVE_TYPE_BIT_POS));
+
+ /** - Disable the clock for PAD peripheral device */
+ CLOCK_DISABLE(CLOCK_PAD);
+ return True;
+ }
+ /* Invalid parameter/s */
+ return False;
+}
+#endif /* REVD */