4545
Fork of mbed-dev by
targets/TARGET_STM/TARGET_STM32F3/i2c_device.h
- Committer:
- <>
- Date:
- 2016-12-20
- Revision:
- 153:fa9ff456f731
- Child:
- 156:95d6b41a828b
File content as of revision 153:fa9ff456f731:
/* mbed Microcontroller Library ******************************************************************************* * Copyright (c) 2015, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ #ifndef MBED_I2C_DEVICE_H #define MBED_I2C_DEVICE_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif #ifdef DEVICE_I2C #define I2C_IP_VERSION_V2 #define I2C_IT_ALL (I2C_IT_ERRI|I2C_IT_TCI|I2C_IT_STOPI|I2C_IT_NACKI|I2C_IT_ADDRI|I2C_IT_RXI|I2C_IT_TXI) /* Family specifc settings for clock source */ #define I2CAPI_I2C1_CLKSRC RCC_I2C1CLKSOURCE_SYSCLK #define I2CAPI_I2C2_CLKSRC RCC_I2C2CLKSOURCE_SYSCLK #define I2CAPI_I2C3_CLKSRC RCC_I2C3CLKSOURCE_SYSCLK /* Provide the suitable timing depending on requested frequencie */ inline uint32_t get_i2c_timing(int hz) { uint32_t tim = 0; /* Values calculated with I2C_Timing_Configuration_V1.0.1.xls file (see AN4235) * Standard mode (up to 100 kHz) * Fast Mode (up to 400 kHz) * Fast Mode Plus (up to 1 MHz) Below values obtained with: - I2C clock source = 64 MHz (System Clock w/ HSI) or 72 (System Clock w/ HSE) - Analog filter delay = ON - Digital filter coefficient = 0 */ if (SystemCoreClock == 64000000) { switch (hz) { case 100000: tim = 0x10B17DB4; // Standard mode with Rise time = 120ns, Fall time = 120ns break; case 400000: tim = 0x00E22163; // Fast Mode with Rise time = 120ns, Fall time = 120ns break; case 1000000: tim = 0x00A00D1E; // Fast Mode Plus with Rise time = 120ns, Fall time = 10ns break; default: break; } } else if (SystemCoreClock == 72000000) { switch (hz) { case 100000: tim = 0x10D28DCB; // Standard mode with Rise time = 120ns, Fall time = 120ns break; case 400000: tim = 0x00F32571; // Fast Mode with Rise time = 120ns, Fall time = 120ns break; case 1000000: tim = 0x00C00D24; // Fast Mode Plus with Rise time = 120ns, Fall time = 10ns break; default: break; } } return tim; } #ifdef __cplusplus } #endif #endif // DEVICE_I2C #endif