4545
Fork of mbed-dev by
targets/TARGET_Freescale/TARGET_K20XX/spi_api.c@149:156823d33999, 2016-10-28 (annotated)
- Committer:
- <>
- Date:
- Fri Oct 28 11:17:30 2016 +0100
- Revision:
- 149:156823d33999
- Parent:
- targets/hal/TARGET_Freescale/TARGET_K20XX/spi_api.c@144:ef7eb2e8f9f7
This updates the lib to the mbed lib v128
NOTE: This release includes a restructuring of the file and directory locations and thus some
include paths in your code may need updating accordingly.
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
<> | 144:ef7eb2e8f9f7 | 1 | /* mbed Microcontroller Library |
<> | 144:ef7eb2e8f9f7 | 2 | * Copyright (c) 2015 ARM Limited |
<> | 144:ef7eb2e8f9f7 | 3 | * |
<> | 144:ef7eb2e8f9f7 | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
<> | 144:ef7eb2e8f9f7 | 5 | * you may not use this file except in compliance with the License. |
<> | 144:ef7eb2e8f9f7 | 6 | * You may obtain a copy of the License at |
<> | 144:ef7eb2e8f9f7 | 7 | * |
<> | 144:ef7eb2e8f9f7 | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
<> | 144:ef7eb2e8f9f7 | 9 | * |
<> | 144:ef7eb2e8f9f7 | 10 | * Unless required by applicable law or agreed to in writing, software |
<> | 144:ef7eb2e8f9f7 | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
<> | 144:ef7eb2e8f9f7 | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
<> | 144:ef7eb2e8f9f7 | 13 | * See the License for the specific language governing permissions and |
<> | 144:ef7eb2e8f9f7 | 14 | * limitations under the License. |
<> | 144:ef7eb2e8f9f7 | 15 | */ |
<> | 144:ef7eb2e8f9f7 | 16 | #include "mbed_assert.h" |
<> | 144:ef7eb2e8f9f7 | 17 | #include "spi_api.h" |
<> | 144:ef7eb2e8f9f7 | 18 | |
<> | 144:ef7eb2e8f9f7 | 19 | #include <math.h> |
<> | 144:ef7eb2e8f9f7 | 20 | |
<> | 144:ef7eb2e8f9f7 | 21 | #include "cmsis.h" |
<> | 144:ef7eb2e8f9f7 | 22 | #include "pinmap.h" |
<> | 144:ef7eb2e8f9f7 | 23 | #include "clk_freqs.h" |
<> | 144:ef7eb2e8f9f7 | 24 | #include "PeripheralPins.h" |
<> | 144:ef7eb2e8f9f7 | 25 | |
<> | 144:ef7eb2e8f9f7 | 26 | void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel) { |
<> | 144:ef7eb2e8f9f7 | 27 | // determine the SPI to use |
<> | 144:ef7eb2e8f9f7 | 28 | SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI); |
<> | 144:ef7eb2e8f9f7 | 29 | SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO); |
<> | 144:ef7eb2e8f9f7 | 30 | SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK); |
<> | 144:ef7eb2e8f9f7 | 31 | SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL); |
<> | 144:ef7eb2e8f9f7 | 32 | SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso); |
<> | 144:ef7eb2e8f9f7 | 33 | SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel); |
<> | 144:ef7eb2e8f9f7 | 34 | |
<> | 144:ef7eb2e8f9f7 | 35 | obj->spi = (SPI_Type*)pinmap_merge(spi_data, spi_cntl); |
<> | 144:ef7eb2e8f9f7 | 36 | MBED_ASSERT((int)obj->spi != NC); |
<> | 144:ef7eb2e8f9f7 | 37 | |
<> | 144:ef7eb2e8f9f7 | 38 | SIM->SCGC5 |= SIM_SCGC5_PORTC_MASK | SIM_SCGC5_PORTD_MASK; |
<> | 144:ef7eb2e8f9f7 | 39 | SIM->SCGC6 |= SIM_SCGC6_SPI0_MASK; |
<> | 144:ef7eb2e8f9f7 | 40 | |
<> | 144:ef7eb2e8f9f7 | 41 | obj->spi->MCR &= ~(SPI_MCR_MDIS_MASK | SPI_MCR_HALT_MASK); |
<> | 144:ef7eb2e8f9f7 | 42 | //obj->spi->MCR |= SPI_MCR_DIS_RXF_MASK | SPI_MCR_DIS_TXF_MASK; |
<> | 144:ef7eb2e8f9f7 | 43 | |
<> | 144:ef7eb2e8f9f7 | 44 | // not halt in the debug mode |
<> | 144:ef7eb2e8f9f7 | 45 | obj->spi->SR |= SPI_SR_EOQF_MASK; |
<> | 144:ef7eb2e8f9f7 | 46 | |
<> | 144:ef7eb2e8f9f7 | 47 | // pin out the spi pins |
<> | 144:ef7eb2e8f9f7 | 48 | pinmap_pinout(mosi, PinMap_SPI_MOSI); |
<> | 144:ef7eb2e8f9f7 | 49 | pinmap_pinout(miso, PinMap_SPI_MISO); |
<> | 144:ef7eb2e8f9f7 | 50 | pinmap_pinout(sclk, PinMap_SPI_SCLK); |
<> | 144:ef7eb2e8f9f7 | 51 | if (ssel != NC) { |
<> | 144:ef7eb2e8f9f7 | 52 | pinmap_pinout(ssel, PinMap_SPI_SSEL); |
<> | 144:ef7eb2e8f9f7 | 53 | } |
<> | 144:ef7eb2e8f9f7 | 54 | } |
<> | 144:ef7eb2e8f9f7 | 55 | |
<> | 144:ef7eb2e8f9f7 | 56 | void spi_free(spi_t *obj) { |
<> | 144:ef7eb2e8f9f7 | 57 | // [TODO] |
<> | 144:ef7eb2e8f9f7 | 58 | } |
<> | 144:ef7eb2e8f9f7 | 59 | void spi_format(spi_t *obj, int bits, int mode, int slave) { |
<> | 144:ef7eb2e8f9f7 | 60 | MBED_ASSERT((bits > 4) || (bits < 16)); |
<> | 144:ef7eb2e8f9f7 | 61 | MBED_ASSERT((mode >= 0) && (mode <= 3)); |
<> | 144:ef7eb2e8f9f7 | 62 | |
<> | 144:ef7eb2e8f9f7 | 63 | uint8_t polarity = (mode & 0x2) ? 1 : 0; |
<> | 144:ef7eb2e8f9f7 | 64 | uint8_t phase = (mode & 0x1) ? 1 : 0; |
<> | 144:ef7eb2e8f9f7 | 65 | uint8_t old_polarity = (obj->spi->CTAR[0] & SPI_CTAR_CPOL_MASK) != 0; |
<> | 144:ef7eb2e8f9f7 | 66 | |
<> | 144:ef7eb2e8f9f7 | 67 | // set master/slave |
<> | 144:ef7eb2e8f9f7 | 68 | if (slave) { |
<> | 144:ef7eb2e8f9f7 | 69 | obj->spi->MCR &= ~SPI_MCR_MSTR_MASK; |
<> | 144:ef7eb2e8f9f7 | 70 | } else { |
<> | 144:ef7eb2e8f9f7 | 71 | obj->spi->MCR |= (1UL << SPI_MCR_MSTR_SHIFT); |
<> | 144:ef7eb2e8f9f7 | 72 | } |
<> | 144:ef7eb2e8f9f7 | 73 | |
<> | 144:ef7eb2e8f9f7 | 74 | // CTAR0 is used |
<> | 144:ef7eb2e8f9f7 | 75 | obj->spi->CTAR[0] &= ~(SPI_CTAR_CPHA_MASK | SPI_CTAR_CPOL_MASK | SPI_CTAR_FMSZ_MASK); |
<> | 144:ef7eb2e8f9f7 | 76 | obj->spi->CTAR[0] |= (polarity << SPI_CTAR_CPOL_SHIFT) | (phase << SPI_CTAR_CPHA_SHIFT) | ((bits - 1) << SPI_CTAR_FMSZ_SHIFT); |
<> | 144:ef7eb2e8f9f7 | 77 | |
<> | 144:ef7eb2e8f9f7 | 78 | //If clk idle state was changed, start a dummy transmission |
<> | 144:ef7eb2e8f9f7 | 79 | //This is a 'feature' in DSPI: https://community.freescale.com/thread/105526 |
<> | 144:ef7eb2e8f9f7 | 80 | if ((old_polarity != polarity) && (slave == 0)) { |
<> | 144:ef7eb2e8f9f7 | 81 | //Start transfer (CS should be high, so shouldn't matter) |
<> | 144:ef7eb2e8f9f7 | 82 | spi_master_write(obj, 0xFFFF); |
<> | 144:ef7eb2e8f9f7 | 83 | } |
<> | 144:ef7eb2e8f9f7 | 84 | } |
<> | 144:ef7eb2e8f9f7 | 85 | |
<> | 144:ef7eb2e8f9f7 | 86 | static const uint8_t baudrate_prescaler[] = {2,3,5,7}; |
<> | 144:ef7eb2e8f9f7 | 87 | static const uint16_t baudrate_scaler[] = {2,4,6,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768}; |
<> | 144:ef7eb2e8f9f7 | 88 | |
<> | 144:ef7eb2e8f9f7 | 89 | void spi_frequency(spi_t *obj, int hz) { |
<> | 144:ef7eb2e8f9f7 | 90 | uint32_t f_error = 0; |
<> | 144:ef7eb2e8f9f7 | 91 | uint32_t p_error = 0xffffffff; |
<> | 144:ef7eb2e8f9f7 | 92 | uint32_t ref = 0; |
<> | 144:ef7eb2e8f9f7 | 93 | uint32_t br = 0; |
<> | 144:ef7eb2e8f9f7 | 94 | uint32_t ref_spr = 0; |
<> | 144:ef7eb2e8f9f7 | 95 | uint32_t ref_prescaler = 0; |
<> | 144:ef7eb2e8f9f7 | 96 | uint32_t ref_dr = 0; |
<> | 144:ef7eb2e8f9f7 | 97 | |
<> | 144:ef7eb2e8f9f7 | 98 | // bus clk |
<> | 144:ef7eb2e8f9f7 | 99 | uint32_t PCLK = bus_frequency(); |
<> | 144:ef7eb2e8f9f7 | 100 | |
<> | 144:ef7eb2e8f9f7 | 101 | for (uint32_t i = 0; i < 4; i++) { |
<> | 144:ef7eb2e8f9f7 | 102 | for (br = 0; br <= 15; br++) { |
<> | 144:ef7eb2e8f9f7 | 103 | for (uint32_t dr = 0; dr < 2; dr++) { |
<> | 144:ef7eb2e8f9f7 | 104 | ref = (PCLK * (1U + dr) / baudrate_prescaler[i]) / baudrate_scaler[br]; |
<> | 144:ef7eb2e8f9f7 | 105 | if (ref > (uint32_t)hz) |
<> | 144:ef7eb2e8f9f7 | 106 | continue; |
<> | 144:ef7eb2e8f9f7 | 107 | f_error = hz - ref; |
<> | 144:ef7eb2e8f9f7 | 108 | if (f_error < p_error) { |
<> | 144:ef7eb2e8f9f7 | 109 | ref_spr = br; |
<> | 144:ef7eb2e8f9f7 | 110 | ref_prescaler = i; |
<> | 144:ef7eb2e8f9f7 | 111 | ref_dr = dr; |
<> | 144:ef7eb2e8f9f7 | 112 | p_error = f_error; |
<> | 144:ef7eb2e8f9f7 | 113 | } |
<> | 144:ef7eb2e8f9f7 | 114 | } |
<> | 144:ef7eb2e8f9f7 | 115 | } |
<> | 144:ef7eb2e8f9f7 | 116 | } |
<> | 144:ef7eb2e8f9f7 | 117 | |
<> | 144:ef7eb2e8f9f7 | 118 | // set PBR and BR |
<> | 144:ef7eb2e8f9f7 | 119 | obj->spi->CTAR[0] &= ~(SPI_CTAR_PBR_MASK | SPI_CTAR_BR_MASK | SPI_CTAR_DBR_MASK); |
<> | 144:ef7eb2e8f9f7 | 120 | obj->spi->CTAR[0] |= (ref_prescaler << SPI_CTAR_PBR_SHIFT) | (ref_spr << SPI_CTAR_BR_SHIFT) | (ref_dr << SPI_CTAR_DBR_SHIFT); |
<> | 144:ef7eb2e8f9f7 | 121 | } |
<> | 144:ef7eb2e8f9f7 | 122 | |
<> | 144:ef7eb2e8f9f7 | 123 | static inline int spi_writeable(spi_t *obj) { |
<> | 144:ef7eb2e8f9f7 | 124 | return (obj->spi->SR & SPI_SR_TFFF_MASK) ? 1 : 0; |
<> | 144:ef7eb2e8f9f7 | 125 | } |
<> | 144:ef7eb2e8f9f7 | 126 | |
<> | 144:ef7eb2e8f9f7 | 127 | static inline int spi_readable(spi_t *obj) { |
<> | 144:ef7eb2e8f9f7 | 128 | return (obj->spi->SR & SPI_SR_RFDF_MASK) ? 1 : 0; |
<> | 144:ef7eb2e8f9f7 | 129 | } |
<> | 144:ef7eb2e8f9f7 | 130 | |
<> | 144:ef7eb2e8f9f7 | 131 | int spi_master_write(spi_t *obj, int value) { |
<> | 144:ef7eb2e8f9f7 | 132 | //clear RX buffer flag |
<> | 144:ef7eb2e8f9f7 | 133 | obj->spi->SR |= SPI_SR_RFDF_MASK; |
<> | 144:ef7eb2e8f9f7 | 134 | // wait tx buffer empty |
<> | 144:ef7eb2e8f9f7 | 135 | while(!spi_writeable(obj)); |
<> | 144:ef7eb2e8f9f7 | 136 | obj->spi->PUSHR = SPI_PUSHR_TXDATA(value & 0xffff) /*| SPI_PUSHR_EOQ_MASK*/; |
<> | 144:ef7eb2e8f9f7 | 137 | |
<> | 144:ef7eb2e8f9f7 | 138 | // wait rx buffer full |
<> | 144:ef7eb2e8f9f7 | 139 | while (!spi_readable(obj)); |
<> | 144:ef7eb2e8f9f7 | 140 | return obj->spi->POPR; |
<> | 144:ef7eb2e8f9f7 | 141 | } |
<> | 144:ef7eb2e8f9f7 | 142 | |
<> | 144:ef7eb2e8f9f7 | 143 | int spi_slave_receive(spi_t *obj) { |
<> | 144:ef7eb2e8f9f7 | 144 | return spi_readable(obj); |
<> | 144:ef7eb2e8f9f7 | 145 | } |
<> | 144:ef7eb2e8f9f7 | 146 | |
<> | 144:ef7eb2e8f9f7 | 147 | int spi_slave_read(spi_t *obj) { |
<> | 144:ef7eb2e8f9f7 | 148 | obj->spi->SR |= SPI_SR_RFDF_MASK; |
<> | 144:ef7eb2e8f9f7 | 149 | return obj->spi->POPR; |
<> | 144:ef7eb2e8f9f7 | 150 | } |
<> | 144:ef7eb2e8f9f7 | 151 | |
<> | 144:ef7eb2e8f9f7 | 152 | void spi_slave_write(spi_t *obj, int value) { |
<> | 144:ef7eb2e8f9f7 | 153 | while (!spi_writeable(obj)); |
<> | 144:ef7eb2e8f9f7 | 154 | } |