iforce2d Chris
/
ubxDistanceMeter
Displays distance to start location on OLED screen.
Diff: u8g_dev_ssd1325_nhd27oled_bw.c
- Revision:
- 0:972874f31c98
diff -r 000000000000 -r 972874f31c98 u8g_dev_ssd1325_nhd27oled_bw.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/u8g_dev_ssd1325_nhd27oled_bw.c Wed Mar 07 12:49:14 2018 +0000 @@ -0,0 +1,264 @@ +/* + + u8g_dev_ssd1325_nhd27oled_bw.c + + 1-Bit (BW) Driver for SSD1325 Controller (OLED Display) + Tested with NHD-2.7-12864UCY3 + + Universal 8bit Graphics Library + + Copyright (c) 2011, olikraus@gmail.com + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, + are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, this list + of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or other + materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF + ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + SSD130x Monochrom OLED Controller + SSD131x Character OLED Controller + SSD132x Graylevel OLED Controller + SSD1331 Color OLED Controller + +*/ + +#ifdef OBSOLETE_CODE + +#include "u8g.h" + +#define WIDTH 128 +#define HEIGHT 64 +#define PAGE_HEIGHT 8 + +/* http://www.newhavendisplay.com/app_notes/OLED_2_7_12864.txt */ +static const uint8_t u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_init_seq[] PROGMEM = { + U8G_ESC_DLY(10), /* delay 10 ms */ + U8G_ESC_CS(0), /* disable chip */ + U8G_ESC_ADR(0), /* instruction mode */ + U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */ + U8G_ESC_CS(1), /* enable chip */ + 0x0ae, /* display off, sleep mode */ + 0x0b3, 0x091, /* set display clock divide ratio/oscillator frequency (set clock as 135 frames/sec) */ + 0x0a8, 0x03f, /* multiplex ratio: 0x03f * 1/64 duty */ + 0x0a2, 0x04c, /* display offset, shift mapping ram counter */ + 0x0a1, 0x000, /* display start line */ + 0x0ad, 0x002, /* master configuration: disable embedded DC-DC, enable internal VCOMH */ + 0x0a0, 0x056, /* remap configuration, vertical address increment, enable nibble remap (upper nibble is left) */ + 0x086, /* full current range (0x084, 0x085, 0x086) */ + 0x0b8, /* set gray scale table */ + 0x01, 0x011, 0x022, 0x032, 0x043, 0x054, 0x065, 0x076, + 0x081, 0x070, /* contrast, brightness, 0..128, Newhaven: 0x040 */ + 0x0b2, 0x051, /* frame frequency (row period) */ + 0x0b1, 0x055, /* phase length */ + 0x0bc, 0x010, /* pre-charge voltage level */ + 0x0b4, 0x002, /* set pre-charge compensation level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */ + 0x0b0, 0x028, /* enable pre-charge compensation (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */ + 0x0be, 0x01c, /* VCOMH voltage */ + 0x0bf, 0x002|0x00d, /* VSL voltage level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */ + 0x0a5, /* all pixel on */ + 0x0af, /* display on */ + U8G_ESC_DLY(100), /* delay 100 ms */ + U8G_ESC_DLY(100), /* delay 100 ms */ + 0x0a4, /* normal display mode */ + U8G_ESC_CS(0), /* disable chip */ + U8G_ESC_END /* end of sequence */ +}; + +static const uint8_t u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_prepare_page_seq[] PROGMEM = { + U8G_ESC_ADR(0), /* instruction mode */ + U8G_ESC_CS(1), /* enable chip */ + 0x015, /* column address... */ + 0x000, /* start at column 0 */ + 0x03f, /* end at column 63 (which is y == 127), because there are two pixel in one column */ + 0x075, /* row address... */ + U8G_ESC_END /* end of sequence */ +}; + + +static void u8g_dev_ssd1325_1bit_prepare_page(u8g_t *u8g, u8g_dev_t *dev) +{ + uint8_t page = ((u8g_pb_t *)(dev->dev_mem))->p.page; + + u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_prepare_page_seq); + + page <<= 3; + u8g_WriteByte(u8g, dev, page); /* start at the selected page */ + page += 7; + u8g_WriteByte(u8g, dev, page); /* end within the selected page */ + + u8g_SetAddress(u8g, dev, 1); /* data mode */ +} + +static void u8g_dev_ssd1325_1bit_2x_prepare_page(u8g_t *u8g, u8g_dev_t *dev, uint8_t is_odd) +{ + uint8_t page = ((u8g_pb_t *)(dev->dev_mem))->p.page; + + u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_prepare_page_seq); + + page <<= 1; + page += is_odd; + + page <<= 3; + u8g_WriteByte(u8g, dev, page); /* start at the selected page */ + page += 7; + u8g_WriteByte(u8g, dev, page); /* end within the selected page */ + + u8g_SetAddress(u8g, dev, 1); /* data mode */ +} + +/* assumes row autoincrement and activated nibble remap */ +#ifdef OLD +static void _OLD_u8g_dev_ssd1325_1bit_write_16_pixel(u8g_t *u8g, u8g_dev_t *dev, uint8_t left, uint8_t right) +{ + uint8_t d, cnt; + cnt = 8; + do + { + d = 0; + if ( left & 1 ) + d |= 0x0f0; + if ( right & 1 ) + d |= 0x00f; + u8g_WriteByte(u8g, dev, d); + left >>= 1; + right >>= 1; + cnt--; + }while ( cnt > 0 ); +} +#endif + +static void u8g_dev_ssd1325_1bit_write_16_pixel(u8g_t *u8g, u8g_dev_t *dev, uint8_t left, uint8_t right) +{ + uint8_t d, cnt; + static uint8_t buf[8]; + cnt = 8; + do + { + d = 0; + if ( left & 128 ) + d |= 0x0f0; + if ( right & 128 ) + d |= 0x00f; + cnt--; + buf[cnt] = d; + left <<= 1; + right <<= 1; + }while ( cnt > 0 ); + u8g_WriteSequence(u8g, dev, 8, buf); +} + +static void u8g_dev_ssd1325_1bit_write_buffer(u8g_t *u8g, u8g_dev_t *dev, uint8_t is_odd) +{ + uint8_t cnt, left, right; + uint8_t *ptr; + u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); + + ptr = pb->buf; + cnt = pb->width; + if ( is_odd ) + ptr += cnt; + cnt >>= 1; + do + { + left = *ptr++; + right = *ptr++; + u8g_dev_ssd1325_1bit_write_16_pixel(u8g, dev, left, right); + cnt--; + } while( cnt > 0 ); +} + +uint8_t u8g_dev_ssd1325_nhd27oled_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) +{ + switch(msg) + { + case U8G_DEV_MSG_INIT: + u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS); + u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_init_seq); + break; + case U8G_DEV_MSG_STOP: + break; + case U8G_DEV_MSG_PAGE_NEXT: + { + u8g_dev_ssd1325_1bit_prepare_page(u8g, dev); + u8g_dev_ssd1325_1bit_write_buffer(u8g, dev, 0); + u8g_SetChipSelect(u8g, dev, 0); + } + break; + case U8G_DEV_MSG_CONTRAST: + u8g_SetChipSelect(u8g, dev, 1); + u8g_SetAddress(u8g, dev, 0); /* instruction mode */ + u8g_WriteByte(u8g, dev, 0x081); + u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1); + u8g_SetChipSelect(u8g, dev, 0); + break; + } + return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg); +} + +uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) +{ + switch(msg) + { + case U8G_DEV_MSG_INIT: + u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS); + u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_init_seq); + break; + case U8G_DEV_MSG_STOP: + break; + case U8G_DEV_MSG_PAGE_NEXT: + { + u8g_dev_ssd1325_1bit_2x_prepare_page(u8g, dev, 0); + u8g_dev_ssd1325_1bit_write_buffer(u8g, dev, 0); + u8g_dev_ssd1325_1bit_2x_prepare_page(u8g, dev, 1); + u8g_dev_ssd1325_1bit_write_buffer(u8g, dev, 1); + u8g_SetChipSelect(u8g, dev, 0); + } + break; + case U8G_DEV_MSG_CONTRAST: + u8g_SetChipSelect(u8g, dev, 1); + u8g_SetAddress(u8g, dev, 0); /* instruction mode */ + u8g_WriteByte(u8g, dev, 0x081); + u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1); + u8g_SetChipSelect(u8g, dev, 0); + break; + } + return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg); +} + +/* disabled, see bw_new.c */ +/* +U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_sw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_SW_SPI); +U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_hw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_HW_SPI); +U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_parallel , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_FAST_PARALLEL); +*/ + +/* +uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_buf[WIDTH*2] U8G_NOCOMMON ; +u8g_pb_t u8g_dev_ssd1325_nhd27oled_2x_bw_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ssd1325_nhd27oled_2x_bw_buf}; +u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_sw_spi = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_SW_SPI }; +u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_hw_spi = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_HW_SPI }; +u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_parallel = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_FAST_PARALLEL }; +*/ + +#endif + +