iforce2d Chris
/
ubxDistanceMeter
Displays distance to start location on OLED screen.
u8g_dev_ssd1325_nhd27oled_bw_new.c@0:972874f31c98, 2018-03-07 (annotated)
- Committer:
- iforce2d
- Date:
- Wed Mar 07 12:49:14 2018 +0000
- Revision:
- 0:972874f31c98
First commit
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
iforce2d | 0:972874f31c98 | 1 | /* |
iforce2d | 0:972874f31c98 | 2 | |
iforce2d | 0:972874f31c98 | 3 | u8g_dev_ssd1325_nhd27oled_bw.c |
iforce2d | 0:972874f31c98 | 4 | |
iforce2d | 0:972874f31c98 | 5 | 1-Bit (BW) Driver for SSD1325 Controller (OLED Display) |
iforce2d | 0:972874f31c98 | 6 | Horizontal architecture, completly rewritten |
iforce2d | 0:972874f31c98 | 7 | Tested with NHD-2.7-12864UCY3 |
iforce2d | 0:972874f31c98 | 8 | |
iforce2d | 0:972874f31c98 | 9 | Universal 8bit Graphics Library |
iforce2d | 0:972874f31c98 | 10 | |
iforce2d | 0:972874f31c98 | 11 | Copyright (c) 2012, olikraus@gmail.com |
iforce2d | 0:972874f31c98 | 12 | All rights reserved. |
iforce2d | 0:972874f31c98 | 13 | |
iforce2d | 0:972874f31c98 | 14 | Redistribution and use in source and binary forms, with or without modification, |
iforce2d | 0:972874f31c98 | 15 | are permitted provided that the following conditions are met: |
iforce2d | 0:972874f31c98 | 16 | |
iforce2d | 0:972874f31c98 | 17 | * Redistributions of source code must retain the above copyright notice, this list |
iforce2d | 0:972874f31c98 | 18 | of conditions and the following disclaimer. |
iforce2d | 0:972874f31c98 | 19 | |
iforce2d | 0:972874f31c98 | 20 | * Redistributions in binary form must reproduce the above copyright notice, this |
iforce2d | 0:972874f31c98 | 21 | list of conditions and the following disclaimer in the documentation and/or other |
iforce2d | 0:972874f31c98 | 22 | materials provided with the distribution. |
iforce2d | 0:972874f31c98 | 23 | |
iforce2d | 0:972874f31c98 | 24 | THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND |
iforce2d | 0:972874f31c98 | 25 | CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, |
iforce2d | 0:972874f31c98 | 26 | INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
iforce2d | 0:972874f31c98 | 27 | MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
iforce2d | 0:972874f31c98 | 28 | DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR |
iforce2d | 0:972874f31c98 | 29 | CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
iforce2d | 0:972874f31c98 | 30 | SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
iforce2d | 0:972874f31c98 | 31 | NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
iforce2d | 0:972874f31c98 | 32 | LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
iforce2d | 0:972874f31c98 | 33 | CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
iforce2d | 0:972874f31c98 | 34 | STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
iforce2d | 0:972874f31c98 | 35 | ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF |
iforce2d | 0:972874f31c98 | 36 | ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
iforce2d | 0:972874f31c98 | 37 | |
iforce2d | 0:972874f31c98 | 38 | SSD130x Monochrom OLED Controller |
iforce2d | 0:972874f31c98 | 39 | SSD131x Character OLED Controller |
iforce2d | 0:972874f31c98 | 40 | SSD132x Graylevel OLED Controller |
iforce2d | 0:972874f31c98 | 41 | SSD1331 Color OLED Controller |
iforce2d | 0:972874f31c98 | 42 | |
iforce2d | 0:972874f31c98 | 43 | */ |
iforce2d | 0:972874f31c98 | 44 | |
iforce2d | 0:972874f31c98 | 45 | #include "u8g.h" |
iforce2d | 0:972874f31c98 | 46 | |
iforce2d | 0:972874f31c98 | 47 | /* width must be multiple of 8, largest value is 248 unless u8g 16 bit mode is enabled */ |
iforce2d | 0:972874f31c98 | 48 | #define WIDTH 128 |
iforce2d | 0:972874f31c98 | 49 | #define HEIGHT 64 |
iforce2d | 0:972874f31c98 | 50 | |
iforce2d | 0:972874f31c98 | 51 | /* http://www.newhavendisplay.com/app_notes/OLED_2_7_12864.txt */ |
iforce2d | 0:972874f31c98 | 52 | static const uint8_t u8g_dev_ssd1325_nhd_27_12864_init_seq[] PROGMEM = { |
iforce2d | 0:972874f31c98 | 53 | U8G_ESC_DLY(10), /* delay 10 ms */ |
iforce2d | 0:972874f31c98 | 54 | U8G_ESC_CS(0), /* disable chip */ |
iforce2d | 0:972874f31c98 | 55 | U8G_ESC_ADR(0), /* instruction mode */ |
iforce2d | 0:972874f31c98 | 56 | U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */ |
iforce2d | 0:972874f31c98 | 57 | U8G_ESC_CS(1), /* enable chip */ |
iforce2d | 0:972874f31c98 | 58 | 0x0ae, /* display off, sleep mode */ |
iforce2d | 0:972874f31c98 | 59 | 0x0b3, 0x091, /* set display clock divide ratio/oscillator frequency (set clock as 135 frames/sec) */ |
iforce2d | 0:972874f31c98 | 60 | 0x0a8, 0x03f, /* multiplex ratio: 0x03f * 1/64 duty */ |
iforce2d | 0:972874f31c98 | 61 | 0x0a2, 0x04c, /* display offset, shift mapping ram counter */ |
iforce2d | 0:972874f31c98 | 62 | 0x0a1, 0x000, /* display start line */ |
iforce2d | 0:972874f31c98 | 63 | 0x0ad, 0x002, /* master configuration: disable embedded DC-DC, enable internal VCOMH */ |
iforce2d | 0:972874f31c98 | 64 | 0x0a0, 0x052, /* remap configuration, horizontal address increment (bit 2 = 0), enable nibble remap (upper nibble is left, bit 1 = 1) */ |
iforce2d | 0:972874f31c98 | 65 | 0x086, /* full current range (0x084, 0x085, 0x086) */ |
iforce2d | 0:972874f31c98 | 66 | 0x0b8, /* set gray scale table */ |
iforce2d | 0:972874f31c98 | 67 | 0x01, 0x011, 0x022, 0x032, 0x043, 0x054, 0x065, 0x076, |
iforce2d | 0:972874f31c98 | 68 | |
iforce2d | 0:972874f31c98 | 69 | 0x081, 0x070, /* contrast, brightness, 0..128, Newhaven: 0x040 */ |
iforce2d | 0:972874f31c98 | 70 | 0x0b2, 0x051, /* frame frequency (row period) */ |
iforce2d | 0:972874f31c98 | 71 | 0x0b1, 0x055, /* phase length */ |
iforce2d | 0:972874f31c98 | 72 | 0x0bc, 0x010, /* pre-charge voltage level */ |
iforce2d | 0:972874f31c98 | 73 | 0x0b4, 0x002, /* set pre-charge compensation level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */ |
iforce2d | 0:972874f31c98 | 74 | 0x0b0, 0x028, /* enable pre-charge compensation (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */ |
iforce2d | 0:972874f31c98 | 75 | 0x0be, 0x01c, /* VCOMH voltage */ |
iforce2d | 0:972874f31c98 | 76 | 0x0bf, 0x002|0x00d, /* VSL voltage level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */ |
iforce2d | 0:972874f31c98 | 77 | 0x0a4, /* normal display mode */ |
iforce2d | 0:972874f31c98 | 78 | 0x0af, /* display on */ |
iforce2d | 0:972874f31c98 | 79 | U8G_ESC_DLY(50), /* delay 50 ms */ |
iforce2d | 0:972874f31c98 | 80 | U8G_ESC_CS(0), /* disable chip */ |
iforce2d | 0:972874f31c98 | 81 | U8G_ESC_END /* end of sequence */ |
iforce2d | 0:972874f31c98 | 82 | }; |
iforce2d | 0:972874f31c98 | 83 | |
iforce2d | 0:972874f31c98 | 84 | static const uint8_t u8g_dev_ssd1325_prepare_row_seq[] PROGMEM = { |
iforce2d | 0:972874f31c98 | 85 | U8G_ESC_ADR(0), /* instruction mode */ |
iforce2d | 0:972874f31c98 | 86 | U8G_ESC_CS(1), /* enable chip */ |
iforce2d | 0:972874f31c98 | 87 | 0x015, /* column address... */ |
iforce2d | 0:972874f31c98 | 88 | 0x000, /* start at column 0 */ |
iforce2d | 0:972874f31c98 | 89 | 0x03f, /* end at column 63 (which is y == 127), because there are two pixel in one column */ |
iforce2d | 0:972874f31c98 | 90 | 0x075, /* row address... */ |
iforce2d | 0:972874f31c98 | 91 | U8G_ESC_END /* end of sequence */ |
iforce2d | 0:972874f31c98 | 92 | }; |
iforce2d | 0:972874f31c98 | 93 | |
iforce2d | 0:972874f31c98 | 94 | static void u8g_dev_ssd1325_prepare_row(u8g_t *u8g, u8g_dev_t *dev, uint8_t delta_row) |
iforce2d | 0:972874f31c98 | 95 | { |
iforce2d | 0:972874f31c98 | 96 | uint8_t row = ((u8g_pb_t *)(dev->dev_mem))->p.page; |
iforce2d | 0:972874f31c98 | 97 | |
iforce2d | 0:972874f31c98 | 98 | row *= ((u8g_pb_t *)(dev->dev_mem))->p.page_height; |
iforce2d | 0:972874f31c98 | 99 | row += delta_row; |
iforce2d | 0:972874f31c98 | 100 | |
iforce2d | 0:972874f31c98 | 101 | u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_prepare_row_seq); |
iforce2d | 0:972874f31c98 | 102 | |
iforce2d | 0:972874f31c98 | 103 | u8g_WriteByte(u8g, dev, row); /* start at the selected row */ |
iforce2d | 0:972874f31c98 | 104 | u8g_WriteByte(u8g, dev, row+1); /* end within the selected row */ |
iforce2d | 0:972874f31c98 | 105 | |
iforce2d | 0:972874f31c98 | 106 | //u8g_SetAddress(u8g, dev, 0); /* instruction mode mode */ |
iforce2d | 0:972874f31c98 | 107 | //u8g_WriteByte(u8g, dev, 0x05c); /* write to ram */ |
iforce2d | 0:972874f31c98 | 108 | u8g_SetAddress(u8g, dev, 1); /* data mode */ |
iforce2d | 0:972874f31c98 | 109 | } |
iforce2d | 0:972874f31c98 | 110 | |
iforce2d | 0:972874f31c98 | 111 | static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = { |
iforce2d | 0:972874f31c98 | 112 | U8G_ESC_ADR(0), /* instruction mode */ |
iforce2d | 0:972874f31c98 | 113 | U8G_ESC_CS(1), /* enable chip */ |
iforce2d | 0:972874f31c98 | 114 | 0x0ae, /* display off */ |
iforce2d | 0:972874f31c98 | 115 | U8G_ESC_CS(1), /* disable chip */ |
iforce2d | 0:972874f31c98 | 116 | U8G_ESC_END /* end of sequence */ |
iforce2d | 0:972874f31c98 | 117 | }; |
iforce2d | 0:972874f31c98 | 118 | |
iforce2d | 0:972874f31c98 | 119 | static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = { |
iforce2d | 0:972874f31c98 | 120 | U8G_ESC_ADR(0), /* instruction mode */ |
iforce2d | 0:972874f31c98 | 121 | U8G_ESC_CS(1), /* enable chip */ |
iforce2d | 0:972874f31c98 | 122 | 0x0af, /* display on */ |
iforce2d | 0:972874f31c98 | 123 | U8G_ESC_DLY(50), /* delay 50 ms */ |
iforce2d | 0:972874f31c98 | 124 | U8G_ESC_CS(1), /* disable chip */ |
iforce2d | 0:972874f31c98 | 125 | U8G_ESC_END /* end of sequence */ |
iforce2d | 0:972874f31c98 | 126 | }; |
iforce2d | 0:972874f31c98 | 127 | |
iforce2d | 0:972874f31c98 | 128 | |
iforce2d | 0:972874f31c98 | 129 | static uint8_t u8g_dev_ssd1325_nhd27oled_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) |
iforce2d | 0:972874f31c98 | 130 | { |
iforce2d | 0:972874f31c98 | 131 | switch(msg) |
iforce2d | 0:972874f31c98 | 132 | { |
iforce2d | 0:972874f31c98 | 133 | //case U8G_DEV_MSG_IS_BBX_INTERSECTION: |
iforce2d | 0:972874f31c98 | 134 | // return u8g_pb_IsIntersection((u8g_pb_t *)(dev->dev_mem), (u8g_dev_arg_bbx_t *)arg); |
iforce2d | 0:972874f31c98 | 135 | case U8G_DEV_MSG_INIT: |
iforce2d | 0:972874f31c98 | 136 | u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS); |
iforce2d | 0:972874f31c98 | 137 | u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_nhd_27_12864_init_seq); |
iforce2d | 0:972874f31c98 | 138 | break; |
iforce2d | 0:972874f31c98 | 139 | case U8G_DEV_MSG_STOP: |
iforce2d | 0:972874f31c98 | 140 | break; |
iforce2d | 0:972874f31c98 | 141 | case U8G_DEV_MSG_PAGE_NEXT: |
iforce2d | 0:972874f31c98 | 142 | { |
iforce2d | 0:972874f31c98 | 143 | uint8_t i; |
iforce2d | 0:972874f31c98 | 144 | u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); |
iforce2d | 0:972874f31c98 | 145 | uint8_t *p = pb->buf; |
iforce2d | 0:972874f31c98 | 146 | u8g_uint_t cnt; |
iforce2d | 0:972874f31c98 | 147 | cnt = pb->width; |
iforce2d | 0:972874f31c98 | 148 | cnt >>= 3; |
iforce2d | 0:972874f31c98 | 149 | |
iforce2d | 0:972874f31c98 | 150 | for( i = 0; i < pb->p.page_height; i++ ) |
iforce2d | 0:972874f31c98 | 151 | { |
iforce2d | 0:972874f31c98 | 152 | u8g_dev_ssd1325_prepare_row(u8g, dev, i); /* this will also enable chip select */ |
iforce2d | 0:972874f31c98 | 153 | u8g_WriteSequenceBWTo16GrDevice(u8g, dev, cnt, p); |
iforce2d | 0:972874f31c98 | 154 | u8g_SetChipSelect(u8g, dev, 0); |
iforce2d | 0:972874f31c98 | 155 | p+=cnt; |
iforce2d | 0:972874f31c98 | 156 | } |
iforce2d | 0:972874f31c98 | 157 | } |
iforce2d | 0:972874f31c98 | 158 | break; |
iforce2d | 0:972874f31c98 | 159 | case U8G_DEV_MSG_CONTRAST: |
iforce2d | 0:972874f31c98 | 160 | u8g_SetChipSelect(u8g, dev, 1); |
iforce2d | 0:972874f31c98 | 161 | u8g_SetAddress(u8g, dev, 0); /* instruction mode */ |
iforce2d | 0:972874f31c98 | 162 | u8g_WriteByte(u8g, dev, 0x081); |
iforce2d | 0:972874f31c98 | 163 | u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1); |
iforce2d | 0:972874f31c98 | 164 | u8g_SetChipSelect(u8g, dev, 0); |
iforce2d | 0:972874f31c98 | 165 | break; |
iforce2d | 0:972874f31c98 | 166 | case U8G_DEV_MSG_SLEEP_ON: |
iforce2d | 0:972874f31c98 | 167 | u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on); |
iforce2d | 0:972874f31c98 | 168 | return 1; |
iforce2d | 0:972874f31c98 | 169 | case U8G_DEV_MSG_SLEEP_OFF: |
iforce2d | 0:972874f31c98 | 170 | u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off); |
iforce2d | 0:972874f31c98 | 171 | return 1; |
iforce2d | 0:972874f31c98 | 172 | } |
iforce2d | 0:972874f31c98 | 173 | return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg); |
iforce2d | 0:972874f31c98 | 174 | } |
iforce2d | 0:972874f31c98 | 175 | |
iforce2d | 0:972874f31c98 | 176 | static uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) |
iforce2d | 0:972874f31c98 | 177 | { |
iforce2d | 0:972874f31c98 | 178 | switch(msg) |
iforce2d | 0:972874f31c98 | 179 | { |
iforce2d | 0:972874f31c98 | 180 | case U8G_DEV_MSG_INIT: |
iforce2d | 0:972874f31c98 | 181 | u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS); |
iforce2d | 0:972874f31c98 | 182 | u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_nhd_27_12864_init_seq); |
iforce2d | 0:972874f31c98 | 183 | break; |
iforce2d | 0:972874f31c98 | 184 | case U8G_DEV_MSG_STOP: |
iforce2d | 0:972874f31c98 | 185 | break; |
iforce2d | 0:972874f31c98 | 186 | case U8G_DEV_MSG_PAGE_NEXT: |
iforce2d | 0:972874f31c98 | 187 | { |
iforce2d | 0:972874f31c98 | 188 | uint8_t i; |
iforce2d | 0:972874f31c98 | 189 | u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); |
iforce2d | 0:972874f31c98 | 190 | uint8_t *p = pb->buf; |
iforce2d | 0:972874f31c98 | 191 | u8g_uint_t cnt; |
iforce2d | 0:972874f31c98 | 192 | cnt = pb->width; |
iforce2d | 0:972874f31c98 | 193 | cnt >>= 3; |
iforce2d | 0:972874f31c98 | 194 | |
iforce2d | 0:972874f31c98 | 195 | for( i = 0; i < pb->p.page_height; i++ ) |
iforce2d | 0:972874f31c98 | 196 | { |
iforce2d | 0:972874f31c98 | 197 | u8g_dev_ssd1325_prepare_row(u8g, dev, i); /* this will also enable chip select */ |
iforce2d | 0:972874f31c98 | 198 | u8g_WriteSequenceBWTo16GrDevice(u8g, dev, cnt, p); |
iforce2d | 0:972874f31c98 | 199 | u8g_SetChipSelect(u8g, dev, 0); |
iforce2d | 0:972874f31c98 | 200 | p+=cnt; |
iforce2d | 0:972874f31c98 | 201 | } |
iforce2d | 0:972874f31c98 | 202 | } |
iforce2d | 0:972874f31c98 | 203 | break; |
iforce2d | 0:972874f31c98 | 204 | case U8G_DEV_MSG_CONTRAST: |
iforce2d | 0:972874f31c98 | 205 | u8g_SetChipSelect(u8g, dev, 1); |
iforce2d | 0:972874f31c98 | 206 | u8g_SetAddress(u8g, dev, 0); /* instruction mode */ |
iforce2d | 0:972874f31c98 | 207 | u8g_WriteByte(u8g, dev, 0x081); |
iforce2d | 0:972874f31c98 | 208 | u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1); |
iforce2d | 0:972874f31c98 | 209 | u8g_SetChipSelect(u8g, dev, 0); |
iforce2d | 0:972874f31c98 | 210 | break; |
iforce2d | 0:972874f31c98 | 211 | case U8G_DEV_MSG_SLEEP_ON: |
iforce2d | 0:972874f31c98 | 212 | u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on); |
iforce2d | 0:972874f31c98 | 213 | return 1; |
iforce2d | 0:972874f31c98 | 214 | case U8G_DEV_MSG_SLEEP_OFF: |
iforce2d | 0:972874f31c98 | 215 | u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off); |
iforce2d | 0:972874f31c98 | 216 | return 1; |
iforce2d | 0:972874f31c98 | 217 | } |
iforce2d | 0:972874f31c98 | 218 | return u8g_dev_pb16h1_base_fn(u8g, dev, msg, arg); |
iforce2d | 0:972874f31c98 | 219 | } |
iforce2d | 0:972874f31c98 | 220 | |
iforce2d | 0:972874f31c98 | 221 | |
iforce2d | 0:972874f31c98 | 222 | |
iforce2d | 0:972874f31c98 | 223 | U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_sw_spi , WIDTH, HEIGHT, 8, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_SW_SPI); |
iforce2d | 0:972874f31c98 | 224 | U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_hw_spi , WIDTH, HEIGHT, 8, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_HW_SPI); |
iforce2d | 0:972874f31c98 | 225 | U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_parallel , WIDTH, HEIGHT, 8, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_FAST_PARALLEL); |
iforce2d | 0:972874f31c98 | 226 | |
iforce2d | 0:972874f31c98 | 227 | uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_buf[WIDTH*2] U8G_NOCOMMON ; |
iforce2d | 0:972874f31c98 | 228 | u8g_pb_t u8g_dev_ssd1325_nhd27oled_2x_bw_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ssd1325_nhd27oled_2x_bw_buf}; |
iforce2d | 0:972874f31c98 | 229 | u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_sw_spi = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_SW_SPI }; |
iforce2d | 0:972874f31c98 | 230 | u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_hw_spi = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_HW_SPI }; |
iforce2d | 0:972874f31c98 | 231 | u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_parallel = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_FAST_PARALLEL }; |
iforce2d | 0:972874f31c98 | 232 | |
iforce2d | 0:972874f31c98 | 233 |