iforce2d Chris
/
ubxDistanceMeter
Displays distance to start location on OLED screen.
u8g_dev_sbn1661_122x32.c@0:972874f31c98, 2018-03-07 (annotated)
- Committer:
- iforce2d
- Date:
- Wed Mar 07 12:49:14 2018 +0000
- Revision:
- 0:972874f31c98
First commit
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
iforce2d | 0:972874f31c98 | 1 | /* |
iforce2d | 0:972874f31c98 | 2 | |
iforce2d | 0:972874f31c98 | 3 | u8g_dev_sbn1661_122x32.c |
iforce2d | 0:972874f31c98 | 4 | |
iforce2d | 0:972874f31c98 | 5 | WG12232 display with 2xSBN1661 / SED1520 controller (122x32 display) |
iforce2d | 0:972874f31c98 | 6 | At the moment only available in the Arduino Environment |
iforce2d | 0:972874f31c98 | 7 | |
iforce2d | 0:972874f31c98 | 8 | Universal 8bit Graphics Library |
iforce2d | 0:972874f31c98 | 9 | |
iforce2d | 0:972874f31c98 | 10 | Copyright (c) 2011, olikraus@gmail.com |
iforce2d | 0:972874f31c98 | 11 | All rights reserved. |
iforce2d | 0:972874f31c98 | 12 | |
iforce2d | 0:972874f31c98 | 13 | Redistribution and use in source and binary forms, with or without modification, |
iforce2d | 0:972874f31c98 | 14 | are permitted provided that the following conditions are met: |
iforce2d | 0:972874f31c98 | 15 | |
iforce2d | 0:972874f31c98 | 16 | * Redistributions of source code must retain the above copyright notice, this list |
iforce2d | 0:972874f31c98 | 17 | of conditions and the following disclaimer. |
iforce2d | 0:972874f31c98 | 18 | |
iforce2d | 0:972874f31c98 | 19 | * Redistributions in binary form must reproduce the above copyright notice, this |
iforce2d | 0:972874f31c98 | 20 | list of conditions and the following disclaimer in the documentation and/or other |
iforce2d | 0:972874f31c98 | 21 | materials provided with the distribution. |
iforce2d | 0:972874f31c98 | 22 | |
iforce2d | 0:972874f31c98 | 23 | THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND |
iforce2d | 0:972874f31c98 | 24 | CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, |
iforce2d | 0:972874f31c98 | 25 | INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
iforce2d | 0:972874f31c98 | 26 | MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
iforce2d | 0:972874f31c98 | 27 | DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR |
iforce2d | 0:972874f31c98 | 28 | CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
iforce2d | 0:972874f31c98 | 29 | SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
iforce2d | 0:972874f31c98 | 30 | NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
iforce2d | 0:972874f31c98 | 31 | LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
iforce2d | 0:972874f31c98 | 32 | CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
iforce2d | 0:972874f31c98 | 33 | STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
iforce2d | 0:972874f31c98 | 34 | ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF |
iforce2d | 0:972874f31c98 | 35 | ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
iforce2d | 0:972874f31c98 | 36 | |
iforce2d | 0:972874f31c98 | 37 | |
iforce2d | 0:972874f31c98 | 38 | */ |
iforce2d | 0:972874f31c98 | 39 | |
iforce2d | 0:972874f31c98 | 40 | #include "u8g.h" |
iforce2d | 0:972874f31c98 | 41 | |
iforce2d | 0:972874f31c98 | 42 | #define WIDTH 122 |
iforce2d | 0:972874f31c98 | 43 | #define HEIGHT 32 |
iforce2d | 0:972874f31c98 | 44 | #define PAGE_HEIGHT 8 |
iforce2d | 0:972874f31c98 | 45 | |
iforce2d | 0:972874f31c98 | 46 | |
iforce2d | 0:972874f31c98 | 47 | static const uint8_t u8g_dev_sbn1661_122x32_init_seq[] PROGMEM = { |
iforce2d | 0:972874f31c98 | 48 | U8G_ESC_CS(0), /* disable chip */ |
iforce2d | 0:972874f31c98 | 49 | U8G_ESC_ADR(0), /* instruction mode */ |
iforce2d | 0:972874f31c98 | 50 | U8G_ESC_RST(15), /* do reset low pulse with (15*16)+2 milliseconds */ |
iforce2d | 0:972874f31c98 | 51 | U8G_ESC_CS(1), /* enable chip 1 */ |
iforce2d | 0:972874f31c98 | 52 | 0x0af, /* display on */ |
iforce2d | 0:972874f31c98 | 53 | 0x0c0, /* display start at line 0 */ |
iforce2d | 0:972874f31c98 | 54 | 0x0a0, /* a0: ADC forward, a1: ADC reverse */ |
iforce2d | 0:972874f31c98 | 55 | 0x0a9, /* a8: 1/16, a9: 1/32 duty */ |
iforce2d | 0:972874f31c98 | 56 | U8G_ESC_CS(2), /* enable chip 2 */ |
iforce2d | 0:972874f31c98 | 57 | 0x0af, /* display on */ |
iforce2d | 0:972874f31c98 | 58 | 0x0c0, /* display start at line 0 */ |
iforce2d | 0:972874f31c98 | 59 | 0x0a0, /* a0: ADC forward, a1: ADC reverse */ |
iforce2d | 0:972874f31c98 | 60 | 0x0a9, /* a8: 1/16, a9: 1/32 duty */ |
iforce2d | 0:972874f31c98 | 61 | |
iforce2d | 0:972874f31c98 | 62 | U8G_ESC_CS(0), /* disable chip */ |
iforce2d | 0:972874f31c98 | 63 | |
iforce2d | 0:972874f31c98 | 64 | |
iforce2d | 0:972874f31c98 | 65 | U8G_ESC_END /* end of sequence */ |
iforce2d | 0:972874f31c98 | 66 | }; |
iforce2d | 0:972874f31c98 | 67 | |
iforce2d | 0:972874f31c98 | 68 | uint8_t u8g_dev_sbn1661_122x32_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) |
iforce2d | 0:972874f31c98 | 69 | { |
iforce2d | 0:972874f31c98 | 70 | switch(msg) |
iforce2d | 0:972874f31c98 | 71 | { |
iforce2d | 0:972874f31c98 | 72 | case U8G_DEV_MSG_INIT: |
iforce2d | 0:972874f31c98 | 73 | u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_NONE); |
iforce2d | 0:972874f31c98 | 74 | u8g_WriteEscSeqP(u8g, dev, u8g_dev_sbn1661_122x32_init_seq); |
iforce2d | 0:972874f31c98 | 75 | break; |
iforce2d | 0:972874f31c98 | 76 | case U8G_DEV_MSG_STOP: |
iforce2d | 0:972874f31c98 | 77 | break; |
iforce2d | 0:972874f31c98 | 78 | case U8G_DEV_MSG_PAGE_NEXT: |
iforce2d | 0:972874f31c98 | 79 | { |
iforce2d | 0:972874f31c98 | 80 | u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); |
iforce2d | 0:972874f31c98 | 81 | |
iforce2d | 0:972874f31c98 | 82 | u8g_SetAddress(u8g, dev, 0); /* command mode */ |
iforce2d | 0:972874f31c98 | 83 | u8g_SetChipSelect(u8g, dev, 1); |
iforce2d | 0:972874f31c98 | 84 | u8g_WriteByte(u8g, dev, 0x0b8 | pb->p.page); /* select current page (SBN1661/SED1520) */ |
iforce2d | 0:972874f31c98 | 85 | u8g_WriteByte(u8g, dev, 0x000 ); /* set X address */ |
iforce2d | 0:972874f31c98 | 86 | u8g_SetAddress(u8g, dev, 1); /* data mode */ |
iforce2d | 0:972874f31c98 | 87 | u8g_WriteSequence(u8g, dev, WIDTH/2, pb->buf); |
iforce2d | 0:972874f31c98 | 88 | |
iforce2d | 0:972874f31c98 | 89 | u8g_SetAddress(u8g, dev, 0); /* command mode */ |
iforce2d | 0:972874f31c98 | 90 | u8g_SetChipSelect(u8g, dev, 2); |
iforce2d | 0:972874f31c98 | 91 | u8g_WriteByte(u8g, dev, 0x0b8 | pb->p.page); /* select current page (SBN1661/SED1520) */ |
iforce2d | 0:972874f31c98 | 92 | u8g_WriteByte(u8g, dev, 0x000 ); /* set X address */ |
iforce2d | 0:972874f31c98 | 93 | u8g_SetAddress(u8g, dev, 1); /* data mode */ |
iforce2d | 0:972874f31c98 | 94 | u8g_WriteSequence(u8g, dev, WIDTH/2, WIDTH/2+(uint8_t *)pb->buf); |
iforce2d | 0:972874f31c98 | 95 | |
iforce2d | 0:972874f31c98 | 96 | u8g_SetChipSelect(u8g, dev, 0); |
iforce2d | 0:972874f31c98 | 97 | |
iforce2d | 0:972874f31c98 | 98 | } |
iforce2d | 0:972874f31c98 | 99 | break; |
iforce2d | 0:972874f31c98 | 100 | case U8G_DEV_MSG_CONTRAST: |
iforce2d | 0:972874f31c98 | 101 | break; |
iforce2d | 0:972874f31c98 | 102 | } |
iforce2d | 0:972874f31c98 | 103 | return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg); |
iforce2d | 0:972874f31c98 | 104 | } |
iforce2d | 0:972874f31c98 | 105 | |
iforce2d | 0:972874f31c98 | 106 | /* u8g_com_arduino_sw_spi_fn does not work, too fast??? */ |
iforce2d | 0:972874f31c98 | 107 | U8G_PB_DEV(u8g_dev_sbn1661_122x32 , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_sbn1661_122x32_fn, u8g_com_arduino_no_en_parallel_fn); |
iforce2d | 0:972874f31c98 | 108 |