Diff: main.cpp

Revision:

2:75a5b58b2338

Parent:

1:5be2682710c6

--- a/main.cpp	Wed Jan 19 23:53:19 2011 +0000
+++ b/main.cpp	Mon Mar 25 07:35:02 2019 +0000
@@ -1,75 +1,42 @@
 #include "mbed.h"
-#include "nRF24L01P.h"
+#include "nRF24L01.h"
+#include "RF24.h"
 
-Serial pc(USBTX, USBRX); // tx, rx
+//Serial pc(USBTX, USBRX); // tx, rx
+Serial pc(PA_9, PA_10);
+
+RF24 radio(PB_5, PB_4, PB_3, PB_7, PB_6); // mosi, miso, sck, csn, ce
 
-nRF24L01P my_nrf24l01p(p5, p6, p7, p8, p9, p10);    // mosi, miso, sck, csn, ce, irq
+struct MyData {
+  float voltage;
+  float current;
+};
+
+MyData data;
 
-DigitalOut myled1(LED1);
-DigitalOut myled2(LED2);
+void resetData() 
+{
+  data.voltage = 12;
+  data.current = 34;
+}
+
+const uint64_t pipeOut =  0xE8E8F0F0E1LL;
 
 int main() {
-
-// The nRF24L01+ supports transfers from 1 to 32 bytes, but Sparkfun's
-//  "Nordic Serial Interface Board" (http://www.sparkfun.com/products/9019)
-//  only handles 4 byte transfers in the ATMega code.
-#define TRANSFER_SIZE   4
-
-    char txData[TRANSFER_SIZE], rxData[TRANSFER_SIZE];
-    int txDataCnt = 0;
-    int rxDataCnt = 0;
-
-    my_nrf24l01p.powerUp();
+    
+    resetData();  
+    
+    radio.begin();
+    radio.setAutoAck(false);
+    radio.setDataRate(RF24_250KBPS);
+    radio.openWritingPipe(pipeOut);
 
-    // Display the (default) setup of the nRF24L01+ chip
-    pc.printf( "nRF24L01+ Frequency    : %d MHz\r\n",  my_nrf24l01p.getRfFrequency() );
-    pc.printf( "nRF24L01+ Output power : %d dBm\r\n",  my_nrf24l01p.getRfOutputPower() );
-    pc.printf( "nRF24L01+ Data Rate    : %d kbps\r\n", my_nrf24l01p.getAirDataRate() );
-    pc.printf( "nRF24L01+ TX Address   : 0x%010llX\r\n", my_nrf24l01p.getTxAddress() );
-    pc.printf( "nRF24L01+ RX Address   : 0x%010llX\r\n", my_nrf24l01p.getRxAddress() );
-
-    pc.printf( "Type keys to test transfers:\r\n  (transfers are grouped into %d characters)\r\n", TRANSFER_SIZE );
-
-    my_nrf24l01p.setTransferSize( TRANSFER_SIZE );
-
-    my_nrf24l01p.setReceiveMode();
-    my_nrf24l01p.enable();
+    radio.printDetails(pc);
 
     while (1) {
-
-        // If we've received anything over the host serial link...
-        if ( pc.readable() ) {
-
-            // ...add it to the transmit buffer
-            txData[txDataCnt++] = pc.getc();
-
-            // If the transmit buffer is full
-            if ( txDataCnt >= sizeof( txData ) ) {
-
-                // Send the transmitbuffer via the nRF24L01+
-                my_nrf24l01p.write( NRF24L01P_PIPE_P0, txData, txDataCnt );
-
-                txDataCnt = 0;
-            }
-
-            // Toggle LED1 (to help debug Host -> nRF24L01+ communication)
-            myled1 = !myled1;
-        }
-
-        // If we've received anything in the nRF24L01+...
-        if ( my_nrf24l01p.readable() ) {
-
-            // ...read the data into the receive buffer
-            rxDataCnt = my_nrf24l01p.read( NRF24L01P_PIPE_P0, rxData, sizeof( rxData ) );
-
-            // Display the receive buffer contents via the host serial link
-            for ( int i = 0; rxDataCnt > 0; rxDataCnt--, i++ ) {
-
-                pc.putc( rxData[i] );
-            }
-
-            // Toggle LED2 (to help debug nRF24L01+ -> Host communication)
-            myled2 = !myled2;
-        }
+    
+        radio.write( (char*)&data, sizeof(data) );
+        
+        //wait( 0.01 );
     }
 }