HTTP Server serving a simple webpage which enables to remotely turn LED1 on/off. Compile, download, run and type 'IP_address/secret/' (don't forget the last '/') into your web browser and hit ENTER.
Dependencies: W5500Interface mbed
Turn LED1, or other digital output, on/off using a web browser.
In this example we create a HTTP server that will serve a simple Web page to remotely turn LED1, or other digital output on the mbed board, on/off by using a web browser. A WIZ550io module or W5500 Network-Shielld is used to assure connection between the mbed module and the Ethernet network (Internet).
Needed parts:
- mbed board
- WIZ550io module or W5500 Network-Shield
- Wires
- Web browser (Internet Explorer, Safari, Firefox, Chrome ...) running on Windows, Mac, Linux, iPhone or Android device.
The project was inspired by the Tuxgraphics Web Switch. Thank you Guido!
NOTE:
- For a Web Switch using an ENC28J60 Ethernet module see WebSwitch_ENC28J60
- For a Web Switch using mbed's built in Ethernet PHY see WebSwitch_mbed-dev or WebSwitch_mbed-os
Diff: main.cpp
- Revision:
- 2:3803ea61daa1
- Parent:
- 1:343d3c7e13b8
- Child:
- 3:d0e3d1bd73e6
--- a/main.cpp Mon Mar 16 09:24:23 2015 +0000 +++ b/main.cpp Mon Mar 16 09:30:02 2015 +0000 @@ -1,4 +1,5 @@ -/* In this project LED1 on the mbed board is switched on/off using a web browser. +/* + * In this project LED1 on the mbed board is switched on/off using a web browser. * However, you can easily modify the project to remotely switch on/off any external device. * The HTTP server is built from an mbed board and a WIZ550io board. * The example is based on the Tuxgraphics Web Switch <http://www.tuxgraphics.org/>.