File content as of revision 1:2263e77400e9:

/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

Contact information
-------------------

Circuits At Home, LTD
Web      :  http://www.circuitsathome.com
e-mail   :  support@circuitsathome.com
 */

#include "masstorage.h"

const uint8_t BulkOnly::epDataInIndex = 1;
const uint8_t BulkOnly::epDataOutIndex = 2;
const uint8_t BulkOnly::epInterruptInIndex = 3;

////////////////////////////////////////////////////////////////////////////////

// Interface code

////////////////////////////////////////////////////////////////////////////////

/**
 * Get the capacity of the media
 *
 * @param lun Logical Unit Number
 * @return media capacity
 */
uint32_t BulkOnly::GetCapacity(uint8_t lun) {
        if(LUNOk[lun])
                return CurrentCapacity[lun];
        return 0LU;
}

/**
 * Get the sector (block) size used on the media
 *
 * @param lun Logical Unit Number
 * @return media sector size
 */
uint16_t BulkOnly::GetSectorSize(uint8_t lun) {
        if(LUNOk[lun])
                return CurrentSectorSize[lun];
        return 0U;
}

/**
 * Test if LUN is ready for use
 *
 * @param lun Logical Unit Number
 * @return true if LUN is ready for use
 */
bool BulkOnly::LUNIsGood(uint8_t lun) {
        return LUNOk[lun];
}

/**
 * Test if LUN is write protected
 *
 * @param lun Logical Unit Number
 * @return cached status of write protect switch
 */
bool BulkOnly::WriteProtected(uint8_t lun) {
        return WriteOk[lun];
}

/**
 * Wrap and execute a SCSI CDB with length of 6
 *
 * @param cdb CDB to execute
 * @param buf_size Size of expected transaction
 * @param buf Buffer
 * @param dir MASS_CMD_DIR_IN | MASS_CMD_DIR_OUT
 * @return
 */
uint8_t BulkOnly::SCSITransaction6(CDB6_t *cdb, uint16_t buf_size, void *buf, uint8_t dir) {
        // promote buf_size to 32bits.
        CommandBlockWrapper cbw = CommandBlockWrapper(++dCBWTag, (uint32_t)buf_size, cdb, dir);
        //SetCurLUN(cdb->LUN);
        return (HandleSCSIError(Transaction(&cbw, buf_size, buf)));
}

/**
 * Wrap and execute a SCSI CDB with length of 10
 *
 * @param cdb CDB to execute
 * @param buf_size Size of expected transaction
 * @param buf Buffer
 * @param dir MASS_CMD_DIR_IN | MASS_CMD_DIR_OUT
 * @return
 */
uint8_t BulkOnly::SCSITransaction10(CDB10_t *cdb, uint16_t buf_size, void *buf, uint8_t dir) {
        // promote buf_size to 32bits.
        CommandBlockWrapper cbw = CommandBlockWrapper(++dCBWTag, (uint32_t)buf_size, cdb, dir);
        //SetCurLUN(cdb->LUN);
        return (HandleSCSIError(Transaction(&cbw, buf_size, buf)));
}

/**
 * Lock or Unlock the tray or door on device.
 * Caution: Some devices with buggy firmware will lock up.
 *
 * @param lun Logical Unit Number
 * @param lock 1 to lock, 0 to unlock
 * @return
 */
uint8_t BulkOnly::LockMedia(uint8_t lun, uint8_t lock) {
        Notify(PSTR("\r\nLockMedia\r\n"), 0x80);
        Notify(PSTR("---------\r\n"), 0x80);

        CDB6_t cdb = CDB6_t(SCSI_CMD_PREVENT_REMOVAL, lun, (uint8_t)0, lock);
        return SCSITransaction6(&cdb, (uint16_t)0, NULL, (uint8_t)MASS_CMD_DIR_IN);
}

/**
 * Media control, for spindle motor and media tray or door.
 * This includes CDROM, TAPE and anything with a media loader.
 *
 * @param lun Logical Unit Number
 * @param ctl 0x00 Stop Motor, 0x01 Start Motor, 0x02 Eject Media, 0x03 Load Media
 * @return 0 on success
 */
uint8_t BulkOnly::MediaCTL(uint8_t lun, uint8_t ctl) {
        Notify(PSTR("\r\nMediaCTL\r\n"), 0x80);
        Notify(PSTR("-----------------\r\n"), 0x80);

        uint8_t rcode = MASS_ERR_UNIT_NOT_READY;
        if(bAddress) {
                CDB6_t cdb = CDB6_t(SCSI_CMD_START_STOP_UNIT, lun, ctl & 0x03, 0);
                rcode = SCSITransaction6(&cdb, (uint16_t)0, NULL, (uint8_t)MASS_CMD_DIR_OUT);
        } else {
                SetCurLUN(lun);
        }
        return rcode;
}

/**
 * Read data from media
 *
 * @param lun Logical Unit Number
 * @param addr LBA address on media to read
 * @param bsize size of a block (we should probably use the cached size)
 * @param blocks how many blocks to read
 * @param buf memory that is able to hold the requested data
 * @return 0 on success
 */
uint8_t BulkOnly::Read(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, uint8_t *buf) {
        if(!LUNOk[lun]) return MASS_ERR_NO_MEDIA;
        Notify(PSTR("\r\nRead LUN:\t"), 0x80);
        D_PrintHex<uint8_t > (lun, 0x90);
        Notify(PSTR("\r\nLBA:\t\t"), 0x90);
        D_PrintHex<uint32_t > (addr, 0x90);
        Notify(PSTR("\r\nblocks:\t\t"), 0x90);
        D_PrintHex<uint8_t > (blocks, 0x90);
        Notify(PSTR("\r\nblock size:\t"), 0x90);
        D_PrintHex<uint16_t > (bsize, 0x90);
        Notify(PSTR("\r\n---------\r\n"), 0x80);
        CDB10_t cdb = CDB10_t(SCSI_CMD_READ_10, lun, blocks, addr);

again:
        uint8_t er = SCSITransaction10(&cdb, ((uint16_t)bsize * blocks), buf, (uint8_t)MASS_CMD_DIR_IN);

        if(er == MASS_ERR_STALL) {
                MediaCTL(lun, 1);
                wait_ms(150);
                if(!TestUnitReady(lun)) goto again;
        }
        return er;
}

/**
 * Write data to media
 *
 * @param lun Logical Unit Number
 * @param addr LBA address on media to write
 * @param bsize size of a block (we should probably use the cached size)
 * @param blocks how many blocks to write
 * @param buf memory that contains the data to write
 * @return 0 on success
 */
uint8_t BulkOnly::Write(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, const uint8_t * buf) {
        if(!LUNOk[lun]) return MASS_ERR_NO_MEDIA;
        if(!WriteOk[lun]) return MASS_ERR_WRITE_PROTECTED;
        Notify(PSTR("\r\nWrite LUN:\t"), 0x80);
        D_PrintHex<uint8_t > (lun, 0x90);
        Notify(PSTR("\r\nLBA:\t\t"), 0x90);
        D_PrintHex<uint32_t > (addr, 0x90);
        Notify(PSTR("\r\nblocks:\t\t"), 0x90);
        D_PrintHex<uint8_t > (blocks, 0x90);
        Notify(PSTR("\r\nblock size:\t"), 0x90);
        D_PrintHex<uint16_t > (bsize, 0x90);
        Notify(PSTR("\r\n---------\r\n"), 0x80);
        CDB10_t cdb = CDB10_t(SCSI_CMD_WRITE_10, lun, blocks, addr);

again:
        uint8_t er = SCSITransaction10(&cdb, ((uint16_t)bsize * blocks), (void*)buf, (uint8_t)MASS_CMD_DIR_OUT);

        if(er == MASS_ERR_WRITE_STALL) {
                MediaCTL(lun, 1);
                wait_ms(150);
                if(!TestUnitReady(lun)) goto again;
        }
        return er;
}

// End of user functions, the remaining code below is driver internals.
// Only developer serviceable parts below!

////////////////////////////////////////////////////////////////////////////////

// Main driver code

////////////////////////////////////////////////////////////////////////////////

BulkOnly::BulkOnly(Usb *p) :
pUsb(p),
bAddress(0),
bIface(0),
bNumEP(1),
qNextPollTime(0),
bPollEnable(false),
//dCBWTag(0),
bLastUsbError(0) {
        ClearAllEP();
        dCBWTag = 0;
        if(pUsb)
                pUsb->RegisterDeviceClass(this);
}

/**
 * USB_ERROR_CONFIG_REQUIRES_ADDITIONAL_RESET == success
 * We need to standardize either the rcode, or change the API to return values
 * so a signal that additional actions are required can be produced.
 * Some of these codes do exist already.
 *
 * TECHNICAL: We could do most of this code elsewhere, with the exception of checking the class instance.
 * Doing so would save some program memory when using multiple drivers.
 *
 * @param parent USB address of parent
 * @param port address of port on parent
 * @param lowspeed true if device is low speed
 * @return
 */
uint8_t BulkOnly::ConfigureDevice(uint8_t parent, uint8_t port, bool lowspeed) {

        const uint8_t constBufSize = sizeof (USB_DEVICE_DESCRIPTOR);

        uint8_t buf[constBufSize];
        USB_DEVICE_DESCRIPTOR * udd = reinterpret_cast<USB_DEVICE_DESCRIPTOR*>(buf);
        uint8_t rcode;
        UsbDevice *p = NULL;
        EpInfo *oldep_ptr = NULL;
        USBTRACE("MS ConfigureDevice\r\n");
        ClearAllEP();
        AddressPool &addrPool = pUsb->GetAddressPool();


        if(bAddress)
                return USB_ERROR_CLASS_INSTANCE_ALREADY_IN_USE;

        // <TECHNICAL>
        // Get pointer to pseudo device with address 0 assigned
        p = addrPool.GetUsbDevicePtr(0);
        if(!p) {
                return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL;
        }

        if(!p->epinfo) {
                USBTRACE("epinfo\r\n");
                return USB_ERROR_EPINFO_IS_NULL;
        }

        // Save old pointer to EP_RECORD of address 0
        oldep_ptr = p->epinfo;

        // Temporary assign new pointer to epInfo to p->epinfo in order to avoid toggle inconsistence
        p->epinfo = epInfo;

        p->lowspeed = lowspeed;
        // Get device descriptor
        rcode = pUsb->getDevDescr(0, 0, constBufSize, (uint8_t*)buf);

        // Restore p->epinfo
        p->epinfo = oldep_ptr;

        if(rcode) {
                goto FailGetDevDescr;
        }
        // Allocate new address according to device class
        bAddress = addrPool.AllocAddress(parent, false, port);

        if(!bAddress)
                return USB_ERROR_OUT_OF_ADDRESS_SPACE_IN_POOL;

        // Extract Max Packet Size from the device descriptor
        epInfo[0].maxPktSize = udd->bMaxPacketSize0;
        // Steal and abuse from epInfo structure to save on memory.
        epInfo[1].epAddr = udd->bNumConfigurations;
        // </TECHNICAL>
        return USB_ERROR_CONFIG_REQUIRES_ADDITIONAL_RESET;

FailGetDevDescr:
#ifdef DEBUG_USB_HOST
        NotifyFailGetDevDescr(rcode);
#endif
        rcode = USB_ERROR_FailGetDevDescr;

        Release();
        return rcode;
};

/**
 *
 * @param parent (not used)
 * @param port (not used)
 * @param lowspeed true if device is low speed
 * @return 0 for success
 */
uint8_t BulkOnly::Init(uint8_t parent __attribute__((unused)), uint8_t port __attribute__((unused)), bool lowspeed) {
        uint8_t rcode;
        uint8_t num_of_conf = epInfo[1].epAddr; // number of configurations
        epInfo[1].epAddr = 0;
        USBTRACE("MS Init\r\n");

        AddressPool &addrPool = pUsb->GetAddressPool();
        UsbDevice *p = addrPool.GetUsbDevicePtr(bAddress);

        if(!p)
                return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL;

        // Assign new address to the device
        wait_ms(2000);
        rcode = pUsb->setAddr(0, 0, bAddress);

        if(rcode) {
                p->lowspeed = false;
                addrPool.FreeAddress(bAddress);
                bAddress = 0;
                USBTRACE2("setAddr:", rcode);
                return rcode;
        }

        USBTRACE2("Addr:", bAddress);

        p->lowspeed = false;

        p = addrPool.GetUsbDevicePtr(bAddress);

        if(!p)
                return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL;

        p->lowspeed = lowspeed;

        // Assign epInfo to epinfo pointer
        rcode = pUsb->setEpInfoEntry(bAddress, 1, epInfo);

        if(rcode)
                goto FailSetDevTblEntry;

        USBTRACE2("NC:", num_of_conf);

        for(uint8_t i = 0; i < num_of_conf; i++) {
                ConfigDescParser< USB_CLASS_MASS_STORAGE,
                        MASS_SUBCLASS_SCSI,
                        MASS_PROTO_BBB,
                        CP_MASK_COMPARE_CLASS |
                        CP_MASK_COMPARE_SUBCLASS |
                        CP_MASK_COMPARE_PROTOCOL > BulkOnlyParser(this);

                rcode = pUsb->getConfDescr(bAddress, 0, i, &BulkOnlyParser);

                if(rcode)
                        goto FailGetConfDescr;

                if(bNumEP > 1)
                        break;
        }

        if(bNumEP < 3)
                return USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED;

        // Assign epInfo to epinfo pointer
        pUsb->setEpInfoEntry(bAddress, bNumEP, epInfo);

        USBTRACE2("Conf:", bConfNum);

        // Set Configuration Value
        rcode = pUsb->setConf(bAddress, 0, bConfNum);

        if(rcode)
                goto FailSetConfDescr;

        //Linux does a 1sec delay after this.
        wait_ms(1000);

        rcode = GetMaxLUN(&bMaxLUN);
        if(rcode)
                goto FailGetMaxLUN;

        if(bMaxLUN >= MASS_MAX_SUPPORTED_LUN) bMaxLUN = MASS_MAX_SUPPORTED_LUN - 1;
        ErrorMessage<uint8_t > (PSTR("MaxLUN"), bMaxLUN);

        wait_ms(1000); // Delay a bit for slow firmware.

        for(uint8_t lun = 0; lun <= bMaxLUN; lun++) {
                InquiryResponse response;
                rcode = Inquiry(lun, sizeof (InquiryResponse), (uint8_t*) & response);
                if(rcode) {
                        ErrorMessage<uint8_t > (PSTR("Inquiry"), rcode);
                } else {
#if 0
                        printf("LUN %i `", lun);
                        uint8_t *buf = response.VendorID;
                        for(int i = 0; i < 28; i++) printf("%c", buf[i]);
                        printf("'\r\nQualifier %1.1X ", response.PeripheralQualifier);
                        printf("Device type %2.2X ", response.DeviceType);
                        printf("RMB %1.1X ", response.Removable);
                        printf("SSCS %1.1X ", response.SCCS);
                        uint8_t sv = response.Version;
                        printf("SCSI version %2.2X\r\nDevice conforms to ", sv);
                        switch(sv) {
                                case 0:
                                        printf("No specific");
                                        break;
                                case 1:
                                        printf("ANSI X3.131-1986 (ANSI 1)");
                                        break;
                                case 2:
                                        printf("ANSI X3.131-1994 (ANSI 2)");
                                        break;
                                case 3:
                                        printf("ANSI INCITS 301-1997 (SPC)");
                                        break;
                                case 4:
                                        printf("ANSI INCITS 351-2001 (SPC-2)");
                                        break;
                                case 5:
                                        printf("ANSI INCITS 408-2005 (SPC-4)");
                                        break;
                                case 6:
                                        printf("T10/1731-D (SPC-4)");
                                        break;
                                default:
                                        printf("unknown");
                        }
                        printf(" standards.\r\n");
#endif
                        uint8_t tries = 0xf0;
                        while((rcode = TestUnitReady(lun))) {
                                if(rcode == 0x08) break; // break on no media, this is OK to do.
                                // try to lock media and spin up
                                if(tries < 14) {
                                        LockMedia(lun, 1);
                                        MediaCTL(lun, 1); // I actually have a USB stick that needs this!
                                } else wait_ms(2 * (tries + 1));
                                tries++;
                                if(!tries) break;
                        }
                        if(!rcode) {
                                wait_ms(1000);
                                LUNOk[lun] = CheckLUN(lun);
                                if(!LUNOk[lun]) LUNOk[lun] = CheckLUN(lun);
                        }
                }
        }


        CheckMedia();

        rcode = OnInit();

        if(rcode)
                goto FailOnInit;

#ifdef DEBUG_USB_HOST
        USBTRACE("MS configured\r\n\r\n");
#endif

        bPollEnable = true;

        //USBTRACE("Poll enabled\r\n");
        return 0;

FailSetConfDescr:
#ifdef DEBUG_USB_HOST
        NotifyFailSetConfDescr();
        goto Fail;
#endif

FailOnInit:
#ifdef DEBUG_USB_HOST
        USBTRACE("OnInit:");
        goto Fail;
#endif

FailGetMaxLUN:
#ifdef DEBUG_USB_HOST
        USBTRACE("GetMaxLUN:");
        goto Fail;
#endif

        //#ifdef DEBUG_USB_HOST
        //FailInvalidSectorSize:
        //        USBTRACE("Sector Size is NOT VALID: ");
        //        goto Fail;
        //#endif

FailSetDevTblEntry:
#ifdef DEBUG_USB_HOST
        NotifyFailSetDevTblEntry();
        goto Fail;
#endif

FailGetConfDescr:
#ifdef DEBUG_USB_HOST
        NotifyFailGetConfDescr();
#endif

#ifdef DEBUG_USB_HOST
Fail:
        NotifyFail(rcode);
#endif
        Release();
        return rcode;
}

/**
 * For driver use only.
 *
 * @param conf
 * @param iface
 * @param alt
 * @param proto
 * @param pep
 */
void BulkOnly::EndpointXtract(uint8_t conf, uint8_t iface, uint8_t alt, uint8_t proto __attribute__((unused)), const USB_ENDPOINT_DESCRIPTOR * pep) {
        ErrorMessage<uint8_t > (PSTR("Conf.Val"), conf);
        ErrorMessage<uint8_t > (PSTR("Iface Num"), iface);
        ErrorMessage<uint8_t > (PSTR("Alt.Set"), alt);

        bConfNum = conf;

        uint8_t index;

#if 1
        if((pep->bmAttributes & bmUSB_TRANSFER_TYPE) == USB_TRANSFER_TYPE_BULK) {
                index = ((pep->bEndpointAddress & 0x80) == 0x80) ? epDataInIndex : epDataOutIndex;
                // Fill in the endpoint info structure
                epInfo[index].epAddr = (pep->bEndpointAddress & 0x0F);
                epInfo[index].maxPktSize = (uint8_t)pep->wMaxPacketSize;
                epInfo[index].bmSndToggle = 0;
                epInfo[index].bmRcvToggle = 0;

                bNumEP++;

                PrintEndpointDescriptor(pep);

        }
#else
        if((pep->bmAttributes & bmUSB_TRANSFER_TYPE) == USB_TRANSFER_TYPE_INTERRUPT && (pep->bEndpointAddress & 0x80) == 0x80)
                index = epInterruptInIndex;
        else if((pep->bmAttributes & bmUSB_TRANSFER_TYPE) == USB_TRANSFER_TYPE_BULK)
                index = ((pep->bEndpointAddress & 0x80) == 0x80) ? epDataInIndex : epDataOutIndex;
        else
                return;

        // Fill in the endpoint info structure
        epInfo[index].epAddr = (pep->bEndpointAddress & 0x0F);
        epInfo[index].maxPktSize = (uint8_t)pep->wMaxPacketSize;
        epInfo[index].bmSndToggle = 0;
        epInfo[index].bmRcvToggle = 0;

        bNumEP++;

        PrintEndpointDescriptor(pep);
#endif
}

/**
 * For driver use only.
 *
 * @return
 */
uint8_t BulkOnly::Release() {
        ClearAllEP();
        pUsb->GetAddressPool().FreeAddress(bAddress);
        return 0;
}

/**
 * For driver use only.
 *
 * @param lun Logical Unit Number
 * @return true if LUN is ready for use.
 */
bool BulkOnly::CheckLUN(uint8_t lun) {
        uint8_t rcode;
        Capacity capacity;
        for(uint8_t i = 0; i < 8; i++) capacity.data[i] = 0;

        rcode = ReadCapacity10(lun, (uint8_t*)capacity.data);
        if(rcode) {
                //printf(">>>>>>>>>>>>>>>>ReadCapacity returned %i\r\n", rcode);
                return false;
        }
        ErrorMessage<uint8_t > (PSTR(">>>>>>>>>>>>>>>>CAPACITY OK ON LUN"), lun);
        for(uint8_t i = 0; i < 8 /*sizeof (Capacity)*/; i++)
                D_PrintHex<uint8_t > (capacity.data[i], 0x80);
        Notify(PSTR("\r\n\r\n"), 0x80);
        // Only 512/1024/2048/4096 are valid values!
        uint32_t c = BMAKE32(capacity.data[4], capacity.data[5], capacity.data[6], capacity.data[7]);
        if(c != 0x0200LU && c != 0x0400LU && c != 0x0800LU && c != 0x1000LU) {
                return false;
        }
        // Store capacity information.
        CurrentSectorSize[lun] = (uint16_t)(c); // & 0xFFFF);

        CurrentCapacity[lun] = BMAKE32(capacity.data[0], capacity.data[1], capacity.data[2], capacity.data[3]) + 1;
        if(CurrentCapacity[lun] == /*0xffffffffLU */ 0x01LU || CurrentCapacity[lun] == 0x00LU) {
                // Buggy firmware will report 0xffffffff or 0 for no media
                if(CurrentCapacity[lun])
                        ErrorMessage<uint8_t > (PSTR(">>>>>>>>>>>>>>>>BUGGY FIRMWARE. CAPACITY FAIL ON LUN"), lun);
                return false;
        }
        wait_ms(20);
        Page3F(lun);
        if(!TestUnitReady(lun)) return true;
        return false;
}

/**
 * For driver use only.
 *
 * Scan for media change on all LUNs
 */
void BulkOnly::CheckMedia() {
        for(uint8_t lun = 0; lun <= bMaxLUN; lun++) {
                if(TestUnitReady(lun)) {
                        LUNOk[lun] = false;
                        continue;
                }
                if(!LUNOk[lun])
                        LUNOk[lun] = CheckLUN(lun);
        }
#if 0
        printf("}}}}}}}}}}}}}}}}STATUS ");
        for(uint8_t lun = 0; lun <= bMaxLUN; lun++) {
                if(LUNOk[lun])
                        printf("#");
                else printf(".");
        }
        printf("\r\n");
#endif
        qNextPollTime = (uint32_t)millis() + 2000;
}

/**
 * For driver use only.
 *
 * @return
 */
uint8_t BulkOnly::Poll() {
        //uint8_t rcode = 0;

        if(!bPollEnable)
                return 0;

        if((int32_t)((uint32_t)millis() - qNextPollTime) >= 0L) {
                CheckMedia();
        }
        //rcode = 0;

        return 0;
}

////////////////////////////////////////////////////////////////////////////////


// SCSI code


////////////////////////////////////////////////////////////////////////////////

/**
 * For driver use only.
 *
 * @param plun
 * @return
 */
uint8_t BulkOnly::GetMaxLUN(uint8_t *plun) {
        uint8_t ret = pUsb->ctrlReq(bAddress, 0, bmREQ_MASSIN, MASS_REQ_GET_MAX_LUN, 0, 0, bIface, 1, 1, plun, NULL);

        if(ret == hrSTALL)
                *plun = 0;

        return 0;
}

/**
 * For driver use only. Used during Driver Init
 *
 * @param lun Logical Unit Number
 * @param bsize
 * @param buf
 * @return
 */
uint8_t BulkOnly::Inquiry(uint8_t lun, uint16_t bsize, uint8_t *buf) {
        Notify(PSTR("\r\nInquiry\r\n"), 0x80);
        Notify(PSTR("---------\r\n"), 0x80);

        CDB6_t cdb = CDB6_t(SCSI_CMD_INQUIRY, lun, 0LU, (uint8_t)bsize, 0);
        uint8_t rc = SCSITransaction6(&cdb, bsize, buf, (uint8_t)MASS_CMD_DIR_IN);

        return rc;
}

/**
 * For driver use only.
 *
 * @param lun Logical Unit Number
 * @return
 */
uint8_t BulkOnly::TestUnitReady(uint8_t lun) {
        //SetCurLUN(lun);
        if(!bAddress)
                return MASS_ERR_UNIT_NOT_READY;

        Notify(PSTR("\r\nTestUnitReady\r\n"), 0x80);
        Notify(PSTR("-----------------\r\n"), 0x80);

        CDB6_t cdb = CDB6_t(SCSI_CMD_TEST_UNIT_READY, lun, (uint8_t)0, 0);
        return SCSITransaction6(&cdb, 0, NULL, (uint8_t)MASS_CMD_DIR_IN);

}

/**
 * For driver use only.
 *
 * @param lun Logical Unit Number
 * @param pc
 * @param page
 * @param subpage
 * @param len
 * @param pbuf
 * @return
 */
uint8_t BulkOnly::ModeSense6(uint8_t lun, uint8_t pc, uint8_t page, uint8_t subpage, uint8_t len, uint8_t * pbuf) {
        Notify(PSTR("\r\rModeSense\r\n"), 0x80);
        Notify(PSTR("------------\r\n"), 0x80);

        CDB6_t cdb = CDB6_t(SCSI_CMD_MODE_SENSE_6, lun, (uint32_t)((((pc << 6) | page) << 8) | subpage), len, 0);
        return SCSITransaction6(&cdb, len, pbuf, (uint8_t)MASS_CMD_DIR_IN);
}

/**
 * For driver use only.
 *
 * @param lun Logical Unit Number
 * @param bsize
 * @param buf
 * @return
 */
uint8_t BulkOnly::ReadCapacity10(uint8_t lun, uint8_t *buf) {
        Notify(PSTR("\r\nReadCapacity\r\n"), 0x80);
        Notify(PSTR("---------------\r\n"), 0x80);

        CDB10_t cdb = CDB10_t(SCSI_CMD_READ_CAPACITY_10, lun);
        return SCSITransaction10(&cdb, 8, buf, (uint8_t)MASS_CMD_DIR_IN);
}

/**
 * For driver use only.
 *
 * Page 3F contains write protect status.
 *
 * @param lun Logical Unit Number to test.
 * @return Write protect switch status.
 */
uint8_t BulkOnly::Page3F(uint8_t lun) {
        uint8_t buf[192];
        for(int i = 0; i < 192; i++) {
                buf[i] = 0x00;
        }
        WriteOk[lun] = true;
        uint8_t rc = ModeSense6(lun, 0, 0x3f, 0, 192, buf);
        if(!rc) {
                WriteOk[lun] = ((buf[2] & 0x80) == 0);
                Notify(PSTR("Mode Sense: "), 0x80);
                for(int i = 0; i < 4; i++) {
                        D_PrintHex<uint8_t > (buf[i], 0x80);
                        Notify(PSTR(" "), 0x80);
                }
                Notify(PSTR("\r\n"), 0x80);
        }
        return rc;
}

/**
 * For driver use only.
 *
 * @param lun Logical Unit Number
 * @param size
 * @param buf
 * @return
 */
uint8_t BulkOnly::RequestSense(uint8_t lun, uint16_t size, uint8_t *buf) {
        Notify(PSTR("\r\nRequestSense\r\n"), 0x80);
        Notify(PSTR("----------------\r\n"), 0x80);

        CDB6_t cdb = CDB6_t(SCSI_CMD_REQUEST_SENSE, lun, 0LU, (uint8_t)size, 0);
        CommandBlockWrapper cbw = CommandBlockWrapper(++dCBWTag, (uint32_t)size, &cdb, (uint8_t)MASS_CMD_DIR_IN);
        //SetCurLUN(lun);
        return Transaction(&cbw, size, buf);
}


////////////////////////////////////////////////////////////////////////////////


// USB code


////////////////////////////////////////////////////////////////////////////////

/**
 * For driver use only.
 *
 * @param index
 * @return
 */
uint8_t BulkOnly::ClearEpHalt(uint8_t index) {
        if(index == 0)
                return 0;

        uint8_t ret = 0;

        while((ret = (pUsb->ctrlReq(bAddress, 0, USB_SETUP_HOST_TO_DEVICE | USB_SETUP_TYPE_STANDARD | USB_SETUP_RECIPIENT_ENDPOINT, USB_REQUEST_CLEAR_FEATURE, USB_FEATURE_ENDPOINT_HALT, 0, ((index == epDataInIndex) ? (0x80 | epInfo[index].epAddr) : epInfo[index].epAddr), 0, 0, NULL, NULL)) == 0x01))
                wait_ms(6);

        if(ret) {
                ErrorMessage<uint8_t > (PSTR("ClearEpHalt"), ret);
                ErrorMessage<uint8_t > (PSTR("EP"), ((index == epDataInIndex) ? (0x80 | epInfo[index].epAddr) : epInfo[index].epAddr));
                return ret;
        }
        epInfo[index].bmSndToggle = 0;
        epInfo[index].bmRcvToggle = 0;
        return 0;
}

/**
 * For driver use only.
 *
 */
void BulkOnly::Reset() {
        while(pUsb->ctrlReq(bAddress, 0, bmREQ_MASSOUT, MASS_REQ_BOMSR, 0, 0, bIface, 0, 0, NULL, NULL) == 0x01) wait_ms(6);
}

/**
 * For driver use only.
 *
 * @return 0 if successful
 */
uint8_t BulkOnly::ResetRecovery() {
        Notify(PSTR("\r\nResetRecovery\r\n"), 0x80);
        Notify(PSTR("-----------------\r\n"), 0x80);

        wait_ms(6);
        Reset();
        wait_ms(6);
        ClearEpHalt(epDataInIndex);
        wait_ms(6);
        bLastUsbError = ClearEpHalt(epDataOutIndex);
        wait_ms(6);
        return bLastUsbError;
}

/**
 * For driver use only.
 *
 * Clear all EP data and clear all LUN status
 */
void BulkOnly::ClearAllEP() {
        for(uint8_t i = 0; i < MASS_MAX_ENDPOINTS; i++) {
                epInfo[i].epAddr = 0;
                epInfo[i].maxPktSize = (i) ? 0 : 8;
                epInfo[i].bmSndToggle = 0;
                epInfo[i].bmRcvToggle = 0;
                epInfo[i].bmNakPower = USB_NAK_DEFAULT;
        }

        for(uint8_t i = 0; i < MASS_MAX_SUPPORTED_LUN; i++) {
                LUNOk[i] = false;
                WriteOk[i] = false;
                CurrentCapacity[i] = 0lu;
                CurrentSectorSize[i] = 0;
        }

        bIface = 0;
        bNumEP = 1;
        bAddress = 0;
        qNextPollTime = 0;
        bPollEnable = false;
        bLastUsbError = 0;
        bMaxLUN = 0;
        bTheLUN = 0;
}

/**
 * For driver use only.
 *
 * @param pcsw
 * @param pcbw
 * @return
 */
bool BulkOnly::IsValidCSW(CommandStatusWrapper *pcsw, CommandBlockWrapperBase *pcbw) {
        if(pcsw->dCSWSignature != MASS_CSW_SIGNATURE) {
                Notify(PSTR("CSW:Sig error\r\n"), 0x80);
                return false;
        }
        if(pcsw->dCSWTag != pcbw->dCBWTag) {
                Notify(PSTR("CSW:Wrong tag\r\n"), 0x80);
                return false;
        }
        return true;
}

/**
 * For driver use only.
 *
 * @param error
 * @param index
 * @return
 */
uint8_t BulkOnly::HandleUsbError(uint8_t error, uint8_t index) {
        uint8_t count = 3;

        bLastUsbError = error;
        //if (error)
        //ClearEpHalt(index);
        while(error && count) {
                if(error != hrSUCCESS) {
                        ErrorMessage<uint8_t > (PSTR("USB Error"), error);
                        ErrorMessage<uint8_t > (PSTR("Index"), index);
                }
                switch(error) {
                                // case hrWRONGPID:
                        case hrSUCCESS:
                                return MASS_ERR_SUCCESS;
                        case hrBUSY:
                                // SIE is busy, just hang out and try again.
                                return MASS_ERR_UNIT_BUSY;
                        case hrTIMEOUT:
                        case hrJERR: return MASS_ERR_DEVICE_DISCONNECTED;
                        case hrSTALL:
                                if(index == 0)
                                        return MASS_ERR_STALL;
                                ClearEpHalt(index);
                                if(index != epDataInIndex)
                                        return MASS_ERR_WRITE_STALL;
                                return MASS_ERR_STALL;

                        case hrNAK:
                                if(index == 0)
                                        return MASS_ERR_UNIT_BUSY;
                                return MASS_ERR_UNIT_BUSY;

                        case hrTOGERR:
                                // Handle a very super rare corner case, where toggles become de-synched.
                                // I have only ran into one device that has this firmware bug, and this is
                                // the only clean way to get back into sync with the buggy device firmware.
                                //   --AJK
                                if(bAddress && bConfNum) {
                                        error = pUsb->setConf(bAddress, 0, bConfNum);

                                        if(error)
                                                break;
                                }
                                return MASS_ERR_SUCCESS;
                        default:
                                ErrorMessage<uint8_t > (PSTR("\r\nUSB"), error);
                                return MASS_ERR_GENERAL_USB_ERROR;
                }
                count--;
        } // while

        return ((error && !count) ? MASS_ERR_GENERAL_USB_ERROR : MASS_ERR_SUCCESS);
}

#if MS_WANT_PARSER

uint8_t BulkOnly::Transaction(CommandBlockWrapper *pcbw, uint16_t buf_size, void *buf) {
        return Transaction(CommandBlockWrapper *pcbw, uint16_t buf_size, void *buf, 0);
}
#endif

/**
 * For driver use only.
 *
 * @param pcbw
 * @param buf_size
 * @param buf
 * @param flags
 * @return
 */
uint8_t BulkOnly::Transaction(CommandBlockWrapper *pcbw, uint16_t buf_size, void *buf
#if MS_WANT_PARSER
        , uint8_t flags
#endif
        ) {

#if MS_WANT_PARSER
        uint16_t bytes = (pcbw->dCBWDataTransferLength > buf_size) ? buf_size : pcbw->dCBWDataTransferLength;
        printf("Transfersize %i\r\n", bytes);
        wait_ms(1000);

        bool callback = (flags & MASS_TRANS_FLG_CALLBACK) == MASS_TRANS_FLG_CALLBACK;
#else
        uint16_t bytes = buf_size;
#endif
        bool write = (pcbw->bmCBWFlags & MASS_CMD_DIR_IN) != MASS_CMD_DIR_IN;
        uint8_t ret = 0;
        uint8_t usberr;
        CommandStatusWrapper csw; // up here, we allocate ahead to save cpu cycles.
        SetCurLUN(pcbw->bmCBWLUN);
        ErrorMessage<uint32_t > (PSTR("CBW.dCBWTag"), pcbw->dCBWTag);

        while((usberr = pUsb->outTransfer(bAddress, epInfo[epDataOutIndex].epAddr, sizeof (CommandBlockWrapper), (uint8_t*)pcbw)) == hrBUSY) wait_ms(1);

        ret = HandleUsbError(usberr, epDataOutIndex);
        //ret = HandleUsbError(pUsb->outTransfer(bAddress, epInfo[epDataOutIndex].epAddr, sizeof (CommandBlockWrapper), (uint8_t*)pcbw), epDataOutIndex);
        if(ret) {
                ErrorMessage<uint8_t > (PSTR("============================ CBW"), ret);
        } else {
                if(bytes) {
                        if(!write) {
#if MS_WANT_PARSER
                                if(callback) {
                                        uint8_t rbuf[bytes];
                                        while((usberr = pUsb->inTransfer(bAddress, epInfo[epDataInIndex].epAddr, &bytes, rbuf)) == hrBUSY) wait_ms(1);
                                        if(usberr == hrSUCCESS) ((USBReadParser*)buf)->Parse(bytes, rbuf, 0);
                                } else {
#endif
                                        while((usberr = pUsb->inTransfer(bAddress, epInfo[epDataInIndex].epAddr, &bytes, (uint8_t*)buf)) == hrBUSY) wait_ms(1);
#if MS_WANT_PARSER

                                }
#endif
                                ret = HandleUsbError(usberr, epDataInIndex);
                        } else {
                                while((usberr = pUsb->outTransfer(bAddress, epInfo[epDataOutIndex].epAddr, bytes, (uint8_t*)buf)) == hrBUSY) wait_ms(1);
                                ret = HandleUsbError(usberr, epDataOutIndex);
                        }
                        if(ret) {
                                ErrorMessage<uint8_t > (PSTR("============================ DAT"), ret);
                        }
                }
        }

        {
                bytes = sizeof (CommandStatusWrapper);
                int tries = 2;
                while(tries--) {
                        while((usberr = pUsb->inTransfer(bAddress, epInfo[epDataInIndex].epAddr, &bytes, (uint8_t*) & csw)) == hrBUSY) wait_ms(1);
                        if(!usberr) break;
                        ClearEpHalt(epDataInIndex);
                        if(tries) ResetRecovery();
                }
                if(!ret) {
                        Notify(PSTR("CBW:\t\tOK\r\n"), 0x80);
                        Notify(PSTR("Data Stage:\tOK\r\n"), 0x80);
                } else {
                        // Throw away csw, IT IS NOT OF ANY USE.
                        ResetRecovery();
                        return ret;
                }
                ret = HandleUsbError(usberr, epDataInIndex);
                if(ret) {
                        ErrorMessage<uint8_t > (PSTR("============================ CSW"), ret);
                }
                if(usberr == hrSUCCESS) {
                        if(IsValidCSW(&csw, pcbw)) {
                                //ErrorMessage<uint32_t > (PSTR("CSW.dCBWTag"), csw.dCSWTag);
                                //ErrorMessage<uint8_t > (PSTR("bCSWStatus"), csw.bCSWStatus);
                                //ErrorMessage<uint32_t > (PSTR("dCSWDataResidue"), csw.dCSWDataResidue);
                                Notify(PSTR("CSW:\t\tOK\r\n\r\n"), 0x80);
                                return csw.bCSWStatus;
                        } else {
                                // NOTE! Sometimes this is caused by the reported residue being wrong.
                                // Get a different device. It isn't compliant, and should have never passed Q&A.
                                // I own one... 05e3:0701 Genesys Logic, Inc. USB 2.0 IDE Adapter.
                                // Other devices that exhibit this behavior exist in the wild too.
                                // Be sure to check quirks in the Linux source code before reporting a bug. --xxxajk
                                Notify(PSTR("Invalid CSW\r\n"), 0x80);
                                ResetRecovery();
                                //return MASS_ERR_SUCCESS;
                                return MASS_ERR_INVALID_CSW;
                        }
                }
        }
        return ret;
}

/**
 * For driver use only.
 *
 * @param lun Logical Unit Number
 * @return
 */
uint8_t BulkOnly::SetCurLUN(uint8_t lun) {
        if(lun > bMaxLUN)
                return MASS_ERR_INVALID_LUN;
        bTheLUN = lun;
        return MASS_ERR_SUCCESS;
};

/**
 * For driver use only.
 *
 * @param status
 * @return
 */
uint8_t BulkOnly::HandleSCSIError(uint8_t status) {
        uint8_t ret = 0;

        switch(status) {
                case 0: return MASS_ERR_SUCCESS;

                case 2:
                        ErrorMessage<uint8_t > (PSTR("Phase Error"), status);
                        ErrorMessage<uint8_t > (PSTR("LUN"), bTheLUN);
                        ResetRecovery();
                        return MASS_ERR_GENERAL_SCSI_ERROR;

                case 1:
                        ErrorMessage<uint8_t > (PSTR("SCSI Error"), status);
                        ErrorMessage<uint8_t > (PSTR("LUN"), bTheLUN);
                        RequestSenseResponce rsp;

                        ret = RequestSense(bTheLUN, sizeof (RequestSenseResponce), (uint8_t*) & rsp);

                        if(ret) {
                                return MASS_ERR_GENERAL_SCSI_ERROR;
                        }
                        ErrorMessage<uint8_t > (PSTR("Response Code"), rsp.bResponseCode);
                        if(rsp.bResponseCode & 0x80) {
                                Notify(PSTR("Information field: "), 0x80);
                                for(int i = 0; i < 4; i++) {
                                        D_PrintHex<uint8_t > (rsp.CmdSpecificInformation[i], 0x80);
                                        Notify(PSTR(" "), 0x80);
                                }
                                Notify(PSTR("\r\n"), 0x80);
                        }
                        ErrorMessage<uint8_t > (PSTR("Sense Key"), rsp.bmSenseKey);
                        ErrorMessage<uint8_t > (PSTR("Add Sense Code"), rsp.bAdditionalSenseCode);
                        ErrorMessage<uint8_t > (PSTR("Add Sense Qual"), rsp.bAdditionalSenseQualifier);
                        // warning, this is not testing ASQ, only SK and ASC.
                        switch(rsp.bmSenseKey) {
                                case SCSI_S_UNIT_ATTENTION:
                                        switch(rsp.bAdditionalSenseCode) {
                                                case SCSI_ASC_MEDIA_CHANGED:
                                                        return MASS_ERR_MEDIA_CHANGED;
                                                default:
                                                        return MASS_ERR_UNIT_NOT_READY;
                                        }
                                case SCSI_S_NOT_READY:
                                        switch(rsp.bAdditionalSenseCode) {
                                                case SCSI_ASC_MEDIUM_NOT_PRESENT:
                                                        return MASS_ERR_NO_MEDIA;
                                                default:
                                                        return MASS_ERR_UNIT_NOT_READY;
                                        }
                                case SCSI_S_ILLEGAL_REQUEST:
                                        switch(rsp.bAdditionalSenseCode) {
                                                case SCSI_ASC_LBA_OUT_OF_RANGE:
                                                        return MASS_ERR_BAD_LBA;
                                                default:
                                                        return MASS_ERR_CMD_NOT_SUPPORTED;
                                        }
                                default:
                                        return MASS_ERR_GENERAL_SCSI_ERROR;
                        }

                        // case 4: return MASS_ERR_UNIT_BUSY; // Busy means retry later.
                        //    case 0x05/0x14: we stalled out
                        //    case 0x15/0x16: we naked out.
                default:
                        ErrorMessage<uint8_t > (PSTR("Gen SCSI Err"), status);
                        ErrorMessage<uint8_t > (PSTR("LUN"), bTheLUN);
                        return status;
        } // switch
}


////////////////////////////////////////////////////////////////////////////////


// Debugging code


////////////////////////////////////////////////////////////////////////////////

/**
 *
 * @param ep_ptr
 */
void BulkOnly::PrintEndpointDescriptor(const USB_ENDPOINT_DESCRIPTOR * ep_ptr) {
        Notify(PSTR("Endpoint descriptor:"), 0x80);
        Notify(PSTR("\r\nLength:\t\t"), 0x80);
        D_PrintHex<uint8_t > (ep_ptr->bLength, 0x80);
        Notify(PSTR("\r\nType:\t\t"), 0x80);
        D_PrintHex<uint8_t > (ep_ptr->bDescriptorType, 0x80);
        Notify(PSTR("\r\nAddress:\t"), 0x80);
        D_PrintHex<uint8_t > (ep_ptr->bEndpointAddress, 0x80);
        Notify(PSTR("\r\nAttributes:\t"), 0x80);
        D_PrintHex<uint8_t > (ep_ptr->bmAttributes, 0x80);
        Notify(PSTR("\r\nMaxPktSize:\t"), 0x80);
        D_PrintHex<uint16_t > (ep_ptr->wMaxPacketSize, 0x80);
        Notify(PSTR("\r\nPoll Intrv:\t"), 0x80);
        D_PrintHex<uint8_t > (ep_ptr->bInterval, 0x80);
        Notify(PSTR("\r\n"), 0x80);
}


////////////////////////////////////////////////////////////////////////////////


// misc/to kill/to-do


////////////////////////////////////////////////////////////////////////////////

/* We won't be needing this... */
uint8_t BulkOnly::Read(uint8_t lun __attribute__((unused)), uint32_t addr __attribute__((unused)), uint16_t bsize __attribute__((unused)), uint8_t blocks __attribute__((unused)), USBReadParser * prs __attribute__((unused))) {
#if MS_WANT_PARSER
        if(!LUNOk[lun]) return MASS_ERR_NO_MEDIA;
        Notify(PSTR("\r\nRead (With parser)\r\n"), 0x80);
        Notify(PSTR("---------\r\n"), 0x80);

        CommandBlockWrapper cbw = CommandBlockWrapper();

        cbw.dCBWSignature = MASS_CBW_SIGNATURE;
        cbw.dCBWTag = ++dCBWTag;
        cbw.dCBWDataTransferLength = ((uint32_t)bsize * blocks);
        cbw.bmCBWFlags = MASS_CMD_DIR_IN,
                cbw.bmCBWLUN = lun;
        cbw.bmCBWCBLength = 10;

        cbw.CBWCB[0] = SCSI_CMD_READ_10;
        cbw.CBWCB[8] = blocks;
        cbw.CBWCB[2] = ((addr >> 24) & 0xff);
        cbw.CBWCB[3] = ((addr >> 16) & 0xff);
        cbw.CBWCB[4] = ((addr >> 8) & 0xff);
        cbw.CBWCB[5] = (addr & 0xff);

        return HandleSCSIError(Transaction(&cbw, bsize, prs, 1));
#else
        return MASS_ERR_NOT_IMPLEMENTED;
#endif
}