Diff: UniGraphic/Inits/UC1608.h

Revision:

0:fa952828e34c

diff -r 000000000000 -r fa952828e34c UniGraphic/Inits/UC1608.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/UniGraphic/Inits/UC1608.h	Sun May 10 10:44:31 2020 +0000
@@ -0,0 +1,76 @@
+#ifndef MBED_UC1608_H
+#define MBED_UC1608_H
+
+
+
+#include "mbed.h"
+#include "LCD.h"
+
+/** Class for UC1608 display controller
+* to be copypasted and adapted for other controllers
+*/
+class UC1608 : public LCD
+{
+ 
+ public:
+
+    /** Create a PAR display interface
+    * @param displayproto only supports PAR_8
+    * @param port GPIO port name to use
+    * @param CS pin connected to CS of display
+    * @param reset pin connected to RESET of display
+    * @param DC pin connected to data/command of display
+    * @param WR pin connected to SDI of display
+    * @param RD pin connected to RS of display
+    * @param name The name used by the parent class to access the interface
+    * @param LCDSIZE_X x size in pixel - optional
+    * @param LCDSIZE_Y y size in pixel - optional
+    */ 
+    UC1608(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name, unsigned int LCDSIZE_X = 240, unsigned  int LCDSIZE_Y = 120);
+  
+    /** Create an SPI display interface
+    * @param displayproto SPI_8 or SPI_16
+    * @param Hz SPI speed in Hz
+    * @param mosi SPI pin
+    * @param miso SPI pin
+    * @param sclk SPI pin
+    * @param CS pin connected to CS of display
+    * @param reset pin connected to RESET of display
+    * @param DC pin connected to data/command of display
+    * @param name The name used by the parent class to access the interface
+    * @param LCDSIZE_X x size in pixel - optional
+    * @param LCDSIZE_Y y size in pixel - optional
+    */ 
+    UC1608(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name , unsigned int LCDSIZE_X = 240, unsigned  int LCDSIZE_Y = 120);
+  
+    /** set the contrast of the screen
+      * @note here overrided because of not standard command
+      * @param o contrast 0-63
+      */
+    virtual void set_contrast(int o);
+    
+    /** Set ChipSelect high or low
+    * @note here overriding the std one, cause CS inverted
+    * @param enable 0/1   
+    */
+    virtual void BusEnable(bool enable);
+  
+protected:
+    
+    
+    /** Init command sequence  
+    */
+    void init();
+    
+    /** set mirror mode
+      * @note here overriding the LCD class default one because of not standard commands
+      * @param mode NONE, X, Y, XY 
+      */
+    virtual void mirrorXY(mirror_t mode);
+    
+    
+
+
+
+};
+#endif
\ No newline at end of file