3.5" inch TFT LCD Display Module 480X320 driven with FSMC.
TFT LCD Display Module 480X320 driven with FSMC
I have recently bought a 3.5" inch TFT LCD Touch Screen Display Module 480X320 with a www.mcufriend.com
label on the back side. The display was equipped with an 8bit parallel interface. First I decided to test it with the UniGraphic library using the BUS_8
protocol. The display was very slow but improved when I switched to the PAR_8
protocol. Because I heard about the possibility to use a Flexible Static Memory Controller (FSMC), built into some STM MCU's, to drive LCD's (read/write to LCD's memory rather than to an external SRAM) I thought it would be a fun to try it out.
Below is the brief story of what I did:
- Created a project for my STM32F407VE board in the STM32CubeIDE
- Set the
Clock Configuration
to match the one used by Mbed for the Seeed Arch Max board:
- Selected
FSMC
in theConnectivity
category and configured it as below: - Let the
STM32CubeIDE
generate the code (files). - Created a new program for the Seeed Arch Max target in the Mbed Online Compiler by selecting a
mbed os blinky
template. - Replaced the
main.cpp
with themain.c
content of theSTM32CubeIDE
project. Copy & Pasted
the other files with codes from theSTM32CubeIDE
project to the online compiler project.- Renamed and modified:
"stm32f4xx_it.h" to "stm32f4xx_it_msp.h"
"stm32f4xx_it.c" to "stm32f4xx_it_msp.c" - Added the UniGraphic library to the online compiler project.
- Extended the
UniGraphic
library with aFSMC_8
protocol and replaced theTFT::set_orientation(int orient)
function with the one used bymcufriend
for arduino. - Modified the
main.cpp
as needed.
Wiring
STM32F407VE | TFT LCD module |
---|---|
+3.3V | 3V3 |
GND | GND |
PB_12 | LCD_RST |
GND | LCD_CS |
PD_13 (RS) | LCD_RS |
PD_5 (WR) | LCD_WR |
PD_4 (RD) | LCD_RD |
PD_14 (DB00) | LCD_D0 |
PD_15 (DB01) | LCD_D1 |
PD_0 (DB02) | LCD_D2 |
PD_1 (DB03) | LCD_D3 |
PE_7 (DB04) | LCD_D4 |
PE_8 (DB05) | LCD_D5 |
PE_9 (DB06) | LCD_D6 |
PE_10 (DB07) | LCD_D7 |
Results
Execution times | ||
---|---|---|
Used protocol | BUS_8 | FSMC_8 |
Operation \ Time | ms | ms |
Clear | 2283.980 | 38.454 |
Plot | 192.066 | 11.365 |
8bit BMP | 63.805 | 41.338 |
Large Font | 163.872 | 7.895 |
Sparce pixels | 2072.265/1458.051 | 74.107/52.168 |
16bit BMP | 2288.589 | 59.904 |
stm32f4xx_it_msp.c
- Committer:
- hudakz
- Date:
- 2020-05-10
- Revision:
- 0:fa952828e34c
- Child:
- 1:47c996032a9e
File content as of revision 0:fa952828e34c:
/* USER CODE BEGIN Header */ /** ****************************************************************************** * @file stm32f4xx_it.c * @brief Interrupt Service Routines. ****************************************************************************** * @attention * * <h2><center>© Copyright (c) 2020 STMicroelectronics. * All rights reserved.</center></h2> * * This software component is licensed by ST under BSD 3-Clause license, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* USER CODE END Header */ /* Includes ------------------------------------------------------------------*/ #include "main.h" #include "stm32f4xx_it_msp.h" /* Private includes ----------------------------------------------------------*/ /* USER CODE BEGIN Includes */ /* USER CODE END Includes */ /* Private typedef -----------------------------------------------------------*/ /* USER CODE BEGIN TD */ /* USER CODE END TD */ /* Private define ------------------------------------------------------------*/ /* USER CODE BEGIN PD */ /* USER CODE END PD */ /* Private macro -------------------------------------------------------------*/ /* USER CODE BEGIN PM */ /* USER CODE END PM */ /* Private variables ---------------------------------------------------------*/ /* USER CODE BEGIN PV */ /* USER CODE END PV */ /* Private function prototypes -----------------------------------------------*/ /* USER CODE BEGIN PFP */ /* USER CODE END PFP */ /* Private user code ---------------------------------------------------------*/ /* USER CODE BEGIN 0 */ /* USER CODE END 0 */ /* External variables --------------------------------------------------------*/ /* USER CODE BEGIN EV */ /* USER CODE END EV */ /******************************************************************************/ /* Cortex-M4 Processor Interruption and Exception Handlers */ /******************************************************************************/ /** * @brief This function handles Non maskable interrupt. */ void NMI_Handler(void) { /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ /* USER CODE END NonMaskableInt_IRQn 0 */ /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ /* USER CODE END NonMaskableInt_IRQn 1 */ } /** * @brief This function handles Hard fault interrupt. */ //void HardFault_Handler(void) //{ // /* USER CODE BEGIN HardFault_IRQn 0 */ // /* USER CODE END HardFault_IRQn 0 */ // while (1) // { // /* USER CODE BEGIN W1_HardFault_IRQn 0 */ // /* USER CODE END W1_HardFault_IRQn 0 */ // } //} /** * @brief This function handles Memory management fault. */ //void MemManage_Handler(void) //{ // /* USER CODE BEGIN MemoryManagement_IRQn 0 */ // /* USER CODE END MemoryManagement_IRQn 0 */ // while (1) // { // /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ // /* USER CODE END W1_MemoryManagement_IRQn 0 */ // } //} /** * @brief This function handles Pre-fetch fault, memory access fault. */ //void BusFault_Handler(void) //{ // /* USER CODE BEGIN BusFault_IRQn 0 */ // /* USER CODE END BusFault_IRQn 0 */ // while (1) // { // /* USER CODE BEGIN W1_BusFault_IRQn 0 */ // /* USER CODE END W1_BusFault_IRQn 0 */ // } //} /** * @brief This function handles Undefined instruction or illegal state. */ //void UsageFault_Handler(void) //{ // /* USER CODE BEGIN UsageFault_IRQn 0 */ // /* USER CODE END UsageFault_IRQn 0 */ // while (1) // { // /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ // /* USER CODE END W1_UsageFault_IRQn 0 */ // } //} /** * @brief This function handles System service call via SWI instruction. */ //void SVC_Handler(void) //{ // /* USER CODE BEGIN SVCall_IRQn 0 */ // /* USER CODE END SVCall_IRQn 0 */ // /* USER CODE BEGIN SVCall_IRQn 1 */ // /* USER CODE END SVCall_IRQn 1 */ //} /** * @brief This function handles Debug monitor. */ //void DebugMon_Handler(void) //{ // /* USER CODE BEGIN DebugMonitor_IRQn 0 */ // /* USER CODE END DebugMonitor_IRQn 0 */ // /* USER CODE BEGIN DebugMonitor_IRQn 1 */ // /* USER CODE END DebugMonitor_IRQn 1 */ //} /** * @brief This function handles Pendable request for system service. */ //void PendSV_Handler(void) //{ // /* USER CODE BEGIN PendSV_IRQn 0 */ // /* USER CODE END PendSV_IRQn 0 */ // /* USER CODE BEGIN PendSV_IRQn 1 */ // /* USER CODE END PendSV_IRQn 1 */ //} /** * @brief This function handles System tick timer. */ //void SysTick_Handler(void) //{ // /* USER CODE BEGIN SysTick_IRQn 0 */ // /* USER CODE END SysTick_IRQn 0 */ // HAL_IncTick(); // /* USER CODE BEGIN SysTick_IRQn 1 */ // /* USER CODE END SysTick_IRQn 1 */ //} /******************************************************************************/ /* STM32F4xx Peripheral Interrupt Handlers */ /* Add here the Interrupt Handlers for the used peripherals. */ /* For the available peripheral interrupt handler names, */ /* please refer to the startup file (startup_stm32f4xx.s). */ /******************************************************************************/ /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/