Diff: ws2801.h

Revision:

3:2b362d164405

Parent:

2:a147efe1f3a8

Child:

4:5e71151b8ad7

diff -r a147efe1f3a8 -r 2b362d164405 ws2801.h
--- a/ws2801.h	Tue Jun 14 19:39:18 2011 +0000
+++ b/ws2801.h	Sat Jun 18 00:33:14 2011 +0000
@@ -1,3 +1,28 @@
+ /**
+*
+*Copyright (c) 2011 Thomas Olsson.
+*
+*Permission is hereby granted, free of charge, to any person obtaining a copy
+*of this software and associated documentation files (the "Software"), to deal
+*in the Software without restriction, including without limitation the rights
+*to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+*copies of the Software, and to permit persons to whom the Software is
+*furnished to do so, subject to the following conditions:
+* 
+*The above copyright notice and this permission notice shall be included in
+*all copies or substantial portions of the Software.
+* 
+*THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+*IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+*FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+*AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+*LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+*OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+*THE SOFTWARE.
+*
+*
+*/
+
 #ifndef WS2801_H
 #define WS2801_H
 
@@ -5,7 +30,14 @@
 #include "HTML_color.h"
 
 
-/** WS2801 class, controlling LED strips or arrays
+/** WS2801 class, controlling LED strips or arrays like this http://www.sparkfun.com/products/10312
+*
+* the WS2801 IC's are 5V but works well connected directly to mbed IO pins.
+*
+* You need a 5V power supply capable of about 2A to light up a 32 led strip, do NOT power from mbed(usb).
+*
+* the required reset delay is a blocking wait(), it can be lowered (or set to 0) if you want to use the
+* time for executing code instead, data sheet says 500us but i found it need at least 800us.
 *
 * Example:
 * @code
@@ -19,49 +51,43 @@
 public:
     /** Create a new ws2801 object
     * 
-    * More details about the function goes here
-    * and here
-    *
+    *     
     * @param CKI clock pin
     * @param SDI data  pin
-    * @param STRIP_LENGTH number of ws2801 IC's i strip or array
-    * @param reset_delay delay in us to allow latching data
+    * @param STRIP_LENGTH number of ws2801 IC's i strip or array defaults to 32
+    * @param reset_delay delay in us to allow latching data defaults to 800
     * @returns nothing   
     */
     ws2801(PinName CKI, PinName SDI, int STRIP_LENGTH = 32, int reset_delay = 800);
     /** write RGB color data to strip or array
     * 
-    * More details about the function goes here
-    * and here
+    * color data for each LED is 3 bytes int the order of rrggbb.
+    * array must have STRIP_LENGTH number of elements
     *
-    * @param strip_colors array of color data, size must be 24xSTRIP_LENGHT bits
+    * @param strip_colors array of color data
     */
     void post(int *strip_colors);
     /** clears the array or strip (all off)
-    * 
-    * More details about the function goes here
-    * and here
-    *
     */    
     void clear(void);
-    /** dimms the entire array
+    /** set level of the entire array 0-100%
     * 
-    * More details about the function goes here
-    * and here
+    * at low levels the colors may change because R,G or B
+    * reaches 0.
     *
     * @param level level in percent
     * @returns current level
     */
-    int setlevel(int level=100);
-    /** set reset/write delay
+    int level(int level=0);
+    /** get/set reset/write delay
     * 
-    * More details about the function goes here
-    * and here
+    * mainly for experimenting with reset values without recompiling,
+    * leave at default to begin with & then lower to get faster execution.
     *
     * @param delay delay in us
     * @returns delay in us
     */    
-    int setdelay(int reset_delay=800);
+    int delay(uint32_t reset_delay=800);
   
 private:  
     DigitalOut _CKI;