Diff: examples/src/ota_example.cpp

Revision:

30:2f5ae37e6c47

Parent:

29:9e2c0d990ace

Child:

31:b1d5811e3d5d

--- a/examples/src/ota_example.cpp	Fri Apr 20 14:42:46 2018 -0500
+++ b/examples/src/ota_example.cpp	Mon Apr 30 14:46:28 2018 -0500
@@ -27,6 +27,7 @@
 static uint8_t network_id[] = { 0x6C, 0x4E, 0xEF, 0x66, 0xF4, 0x79, 0x86, 0xA6 };
 static uint8_t network_key[] = { 0x1F, 0x33, 0xA1, 0x70, 0xA5, 0xF1, 0xFD, 0xA0, 0xAB, 0x69, 0x7A, 0xAE, 0x2B, 0x95, 0x91, 0x6B };
 static uint8_t frequency_sub_band = 0;
+static bool public_network = true;
 static uint8_t join_delay = 5;
 static uint8_t ack = 0;
 static bool adr = true;
@@ -42,12 +43,23 @@
 
 Serial pc(USBTX, USBRX);
 
+#if defined(TARGET_XDOT_L151CC)
+I2C i2c(I2C_SDA, I2C_SCL);
+ISL29011 lux(i2c);
+#else
+AnalogIn lux(XBEE_AD0);
+#endif
+
 int main() {
     // Custom event handler for automatically displaying RX data
     RadioEvent events;
 
     pc.baud(115200);
 
+#if defined(TARGET_XDOT_L151CC)
+    i2c.frequency(400000);
+#endif
+
     mts::MTSLog::setLogLevel(mts::MTSLog::TRACE_LEVEL);
     
 #if CHANNEL_PLAN == CP_US915
@@ -95,7 +107,7 @@
         // only one method or the other should be used!
         // network ID = crc64(network name)
         // network KEY = cmac(network passphrase)
-        update_ota_config_name_phrase(network_name, network_passphrase, frequency_sub_band, ack);
+        update_ota_config_name_phrase(network_name, network_passphrase, frequency_sub_band, public_network, ack);
         //update_ota_config_id_key(network_id, network_key, frequency_sub_band, public_network, ack);
 
         // configure network link checks
@@ -126,8 +138,8 @@
         dot->restoreNetworkSession();
     }
 
-    uint8_t counter = 0;
     while (true) {
+        uint16_t light;
         std::vector<uint8_t> tx_data;
 
         // join network if not joined
@@ -135,10 +147,30 @@
             join_network();
         }
 
-        tx_data.push_back(++counter);
-        logInfo("sending uplink with data = %d", counter);
+#if defined(TARGET_XDOT_L151CC)
+        // configure the ISL29011 sensor on the xDot-DK for continuous ambient light sampling, 16 bit conversion, and maximum range
+        lux.setMode(ISL29011::ALS_CONT);
+        lux.setResolution(ISL29011::ADC_16BIT);
+        lux.setRange(ISL29011::RNG_64000);
+
+        // get the latest light sample and send it to the gateway
+        light = lux.getData();
+        tx_data.push_back((light >> 8) & 0xFF);
+        tx_data.push_back(light & 0xFF);
+        logInfo("light: %lu [0x%04X]", light, light);
         send_data(tx_data);
 
+        // put the LSL29011 ambient light sensor into a low power state
+        lux.setMode(ISL29011::PWR_DOWN);
+#else 
+        // get some dummy data and send it to the gateway
+        light = lux.read_u16();
+        tx_data.push_back((light >> 8) & 0xFF);
+        tx_data.push_back(light & 0xFF);
+        logInfo("light: %lu [0x%04X]", light, light);
+        send_data(tx_data);
+#endif
+
         // if going into deepsleep mode, save the session so we don't need to join again after waking up
         // not necessary if going into sleep mode since RAM is retained
         if (deep_sleep) {