Stripped down version of Segundos NetService library (http://mbed.org/users/segundo/libraries/NetServices ). I have removed all NetServices, and all functions which had been disabled. Use this version when you need only pure TCP or UDP functions - this library compiles faster.

Dependencies:   lwip lwip-sys

Dependents:   christmasLights device_server pop3demo device_server_udp ... more

Revision:
1:9d93f4dc2f46
Parent:
0:8b387bed54c2
--- a/lwip/core/init.c	Mon Jan 10 21:03:11 2011 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,303 +0,0 @@
-/**
- * @file
- * Modules initialization
- *
- */
-
-/*
- * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
- * All rights reserved. 
- * 
- * Redistribution and use in source and binary forms, with or without modification, 
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission. 
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
- * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
- * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
- * OF SUCH DAMAGE.
- *
- * This file is part of the lwIP TCP/IP stack.
- * 
- * Author: Adam Dunkels <adam@sics.se>
- *
- */
-
-#include "lwip/opt.h"
-
-#include "lwip/init.h"
-#include "lwip/stats.h"
-#include "lwip/sys.h"
-#include "lwip/mem.h"
-#include "lwip/memp.h"
-#include "lwip/pbuf.h"
-#include "lwip/netif.h"
-#include "lwip/sockets.h"
-#include "lwip/ip.h"
-#include "lwip/raw.h"
-#include "lwip/udp.h"
-#include "lwip/tcp_impl.h"
-#include "lwip/snmp_msg.h"
-#include "lwip/autoip.h"
-#include "lwip/igmp.h"
-#include "lwip/dns.h"
-#include "lwip/timers.h"
-#include "netif/etharp.h"
-
-/* Compile-time sanity checks for configuration errors.
- * These can be done independently of LWIP_DEBUG, without penalty.
- */
-#ifndef BYTE_ORDER
-  #error "BYTE_ORDER is not defined, you have to define it in your cc.h"
-#endif
-#if (!IP_SOF_BROADCAST && IP_SOF_BROADCAST_RECV)
-  #error "If you want to use broadcast filter per pcb on recv operations, you have to define IP_SOF_BROADCAST=1 in your lwipopts.h"
-#endif
-#if (!LWIP_ARP && ARP_QUEUEING)
-  #error "If you want to use ARP Queueing, you have to define LWIP_ARP=1 in your lwipopts.h"
-#endif
-#if (!LWIP_UDP && LWIP_UDPLITE)
-  #error "If you want to use UDP Lite, you have to define LWIP_UDP=1 in your lwipopts.h"
-#endif
-#if (!LWIP_UDP && LWIP_SNMP)
-  #error "If you want to use SNMP, you have to define LWIP_UDP=1 in your lwipopts.h"
-#endif
-#if (!LWIP_UDP && LWIP_DHCP)
-  #error "If you want to use DHCP, you have to define LWIP_UDP=1 in your lwipopts.h"
-#endif
-#if (!LWIP_UDP && LWIP_IGMP)
-  #error "If you want to use IGMP, you have to define LWIP_UDP=1 in your lwipopts.h"
-#endif
-#if (!LWIP_UDP && LWIP_SNMP)
-  #error "If you want to use SNMP, you have to define LWIP_UDP=1 in your lwipopts.h"
-#endif
-#if (!LWIP_UDP && LWIP_DNS)
-  #error "If you want to use DNS, you have to define LWIP_UDP=1 in your lwipopts.h"
-#endif
-#if (LWIP_ARP && ARP_QUEUEING && (MEMP_NUM_ARP_QUEUE<=0))
-  #error "If you want to use ARP Queueing, you have to define MEMP_NUM_ARP_QUEUE>=1 in your lwipopts.h"
-#endif
-#if (LWIP_RAW && (MEMP_NUM_RAW_PCB<=0))
-  #error "If you want to use RAW, you have to define MEMP_NUM_RAW_PCB>=1 in your lwipopts.h"
-#endif
-#if (LWIP_UDP && (MEMP_NUM_UDP_PCB<=0))
-  #error "If you want to use UDP, you have to define MEMP_NUM_UDP_PCB>=1 in your lwipopts.h"
-#endif
-#if (LWIP_TCP && (MEMP_NUM_TCP_PCB<=0))
-  #error "If you want to use TCP, you have to define MEMP_NUM_TCP_PCB>=1 in your lwipopts.h"
-#endif
-#if (LWIP_TCP && (TCP_WND > 0xffff))
-  #error "If you want to use TCP, TCP_WND must fit in an u16_t, so, you have to reduce it in your lwipopts.h"
-#endif
-#if (LWIP_TCP && (TCP_SND_QUEUELEN > 0xffff))
-  #error "If you want to use TCP, TCP_SND_QUEUELEN must fit in an u16_t, so, you have to reduce it in your lwipopts.h"
-#endif
-#if (LWIP_TCP && ((TCP_MAXRTX > 12) || (TCP_SYNMAXRTX > 12)))
-  #error "If you want to use TCP, TCP_MAXRTX and TCP_SYNMAXRTX must less or equal to 12 (due to tcp_backoff table), so, you have to reduce them in your lwipopts.h"
-#endif
-#if (LWIP_TCP && TCP_LISTEN_BACKLOG && (TCP_DEFAULT_LISTEN_BACKLOG < 0) || (TCP_DEFAULT_LISTEN_BACKLOG > 0xff))
-  #error "If you want to use TCP backlog, TCP_DEFAULT_LISTEN_BACKLOG must fit into an u8_t"
-#endif
-#if (LWIP_IGMP && (MEMP_NUM_IGMP_GROUP<=1))
-  #error "If you want to use IGMP, you have to define MEMP_NUM_IGMP_GROUP>1 in your lwipopts.h"
-#endif
-#if (LWIP_NETIF_API && (NO_SYS==1))
-  #error "If you want to use NETIF API, you have to define NO_SYS=0 in your lwipopts.h"
-#endif
-#if ((LWIP_SOCKET || LWIP_NETCONN) && (NO_SYS==1))
-  #error "If you want to use Sequential API, you have to define NO_SYS=0 in your lwipopts.h"
-#endif
-#if ((LWIP_NETCONN || LWIP_SOCKET) && (MEMP_NUM_TCPIP_MSG_API<=0))
-  #error "If you want to use Sequential API, you have to define MEMP_NUM_TCPIP_MSG_API>=1 in your lwipopts.h"
-#endif
-#if (!LWIP_NETCONN && LWIP_SOCKET)
-  #error "If you want to use Socket API, you have to define LWIP_NETCONN=1 in your lwipopts.h"
-#endif
-#if (((!LWIP_DHCP) || (!LWIP_AUTOIP)) && LWIP_DHCP_AUTOIP_COOP)
-  #error "If you want to use DHCP/AUTOIP cooperation mode, you have to define LWIP_DHCP=1 and LWIP_AUTOIP=1 in your lwipopts.h"
-#endif
-#if (((!LWIP_DHCP) || (!LWIP_ARP)) && DHCP_DOES_ARP_CHECK)
-  #error "If you want to use DHCP ARP checking, you have to define LWIP_DHCP=1 and LWIP_ARP=1 in your lwipopts.h"
-#endif
-#if (!LWIP_ARP && LWIP_AUTOIP)
-  #error "If you want to use AUTOIP, you have to define LWIP_ARP=1 in your lwipopts.h"
-#endif
-#if (LWIP_SNMP && (SNMP_CONCURRENT_REQUESTS<=0))
-  #error "If you want to use SNMP, you have to define SNMP_CONCURRENT_REQUESTS>=1 in your lwipopts.h"
-#endif
-#if (LWIP_SNMP && (SNMP_TRAP_DESTINATIONS<=0))
-  #error "If you want to use SNMP, you have to define SNMP_TRAP_DESTINATIONS>=1 in your lwipopts.h"
-#endif
-#if (LWIP_TCP && ((LWIP_EVENT_API && LWIP_CALLBACK_API) || (!LWIP_EVENT_API && !LWIP_CALLBACK_API)))
-  #error "One and exactly one of LWIP_EVENT_API and LWIP_CALLBACK_API has to be enabled in your lwipopts.h"
-#endif
-/* There must be sufficient timeouts, taking into account requirements of the subsystems. */
-#if LWIP_TIMERS && (MEMP_NUM_SYS_TIMEOUT < (LWIP_TCP + IP_REASSEMBLY + LWIP_ARP + (2*LWIP_DHCP) + LWIP_AUTOIP + LWIP_IGMP + LWIP_DNS + PPP_SUPPORT))
-  #error "MEMP_NUM_SYS_TIMEOUT is too low to accomodate all required timeouts"
-#endif
-#if (IP_REASSEMBLY && (MEMP_NUM_REASSDATA > IP_REASS_MAX_PBUFS))
-  #error "MEMP_NUM_REASSDATA > IP_REASS_MAX_PBUFS doesn't make sense since each struct ip_reassdata must hold 2 pbufs at least!"
-#endif
-#if (MEM_LIBC_MALLOC && MEM_USE_POOLS)
-  #error "MEM_LIBC_MALLOC and MEM_USE_POOLS may not both be simultaneously enabled in your lwipopts.h"
-#endif
-#if (MEM_USE_POOLS && !MEMP_USE_CUSTOM_POOLS)
-  #error "MEM_USE_POOLS requires custom pools (MEMP_USE_CUSTOM_POOLS) to be enabled in your lwipopts.h"
-#endif
-#if (PBUF_POOL_BUFSIZE <= MEM_ALIGNMENT)
-  #error "PBUF_POOL_BUFSIZE must be greater than MEM_ALIGNMENT or the offset may take the full first pbuf"
-#endif
-#if (TCP_QUEUE_OOSEQ && !LWIP_TCP)
-  #error "TCP_QUEUE_OOSEQ requires LWIP_TCP"
-#endif
-#if (DNS_LOCAL_HOSTLIST && !DNS_LOCAL_HOSTLIST_IS_DYNAMIC && !(defined(DNS_LOCAL_HOSTLIST_INIT)))
-  #error "you have to define define DNS_LOCAL_HOSTLIST_INIT {{'host1', 0x123}, {'host2', 0x234}} to initialize DNS_LOCAL_HOSTLIST"
-#endif
-#if PPP_SUPPORT && !PPPOS_SUPPORT & !PPPOE_SUPPORT
-  #error "PPP_SUPPORT needs either PPPOS_SUPPORT or PPPOE_SUPPORT turned on"
-#endif
-#if !LWIP_ETHERNET && (LWIP_ARP || PPPOE_SUPPORT)
-  #error "LWIP_ETHERNET needs to be turned on for LWIP_ARP or PPPOE_SUPPORT"
-#endif
-#if LWIP_IGMP && !defined(LWIP_RAND)
-  #error "When using IGMP, LWIP_RAND() needs to be defined to a random-function returning an u32_t random value"
-#endif
-#if LWIP_TCPIP_CORE_LOCKING_INPUT && !LWIP_TCPIP_CORE_LOCKING
-  #error "When using LWIP_TCPIP_CORE_LOCKING_INPUT, LWIP_TCPIP_CORE_LOCKING must be enabled, too"
-#endif
-#if LWIP_TCP && LWIP_NETIF_TX_SINGLE_PBUF && !TCP_OVERSIZE
-  #error "LWIP_NETIF_TX_SINGLE_PBUF needs TCP_OVERSIZE enabled to create single-pbuf TCP packets"
-#endif
-#if IP_FRAG && IP_FRAG_USES_STATIC_BUF && LWIP_NETIF_TX_SINGLE_PBUF
-  #error "LWIP_NETIF_TX_SINGLE_PBUF does not work with IP_FRAG_USES_STATIC_BUF==1 as that creates pbuf queues"
-#endif
-
-
-/* Compile-time checks for deprecated options.
- */
-#ifdef MEMP_NUM_TCPIP_MSG
-  #error "MEMP_NUM_TCPIP_MSG option is deprecated. Remove it from your lwipopts.h."
-#endif
-#ifdef MEMP_NUM_API_MSG
-  #error "MEMP_NUM_API_MSG option is deprecated. Remove it from your lwipopts.h."
-#endif
-#ifdef TCP_REXMIT_DEBUG
-  #error "TCP_REXMIT_DEBUG option is deprecated. Remove it from your lwipopts.h."
-#endif
-#ifdef RAW_STATS
-  #error "RAW_STATS option is deprecated. Remove it from your lwipopts.h."
-#endif
-#ifdef ETHARP_QUEUE_FIRST
-  #error "ETHARP_QUEUE_FIRST option is deprecated. Remove it from your lwipopts.h."
-#endif
-#ifdef ETHARP_ALWAYS_INSERT
-  #error "ETHARP_ALWAYS_INSERT option is deprecated. Remove it from your lwipopts.h."
-#endif
-
-#ifdef LWIP_DEBUG
-static void
-lwip_sanity_check(void)
-{
-  /* Warnings */
-#if LWIP_NETCONN
-  if (MEMP_NUM_NETCONN > (MEMP_NUM_TCP_PCB+MEMP_NUM_TCP_PCB_LISTEN+MEMP_NUM_UDP_PCB+MEMP_NUM_RAW_PCB))
-    LWIP_PLATFORM_DIAG(("lwip_sanity_check: WARNING: MEMP_NUM_NETCONN should be less than the sum of MEMP_NUM_{TCP,RAW,UDP}_PCB+MEMP_NUM_TCP_PCB_LISTEN\n"));
-#endif /* LWIP_NETCONN */
-#if LWIP_TCP
-  if (MEMP_NUM_TCP_SEG < TCP_SND_QUEUELEN)
-    LWIP_PLATFORM_DIAG(("lwip_sanity_check: WARNING: MEMP_NUM_TCP_SEG should be at least as big as TCP_SND_QUEUELEN\n"));
-  if (TCP_SND_BUF < 2 * TCP_MSS)
-    LWIP_PLATFORM_DIAG(("lwip_sanity_check: WARNING: TCP_SND_BUF must be at least as much as (2 * TCP_MSS) for things to work smoothly\n"));
-  if (TCP_SND_QUEUELEN < (2 * (TCP_SND_BUF/TCP_MSS)))
-    LWIP_PLATFORM_DIAG(("lwip_sanity_check: WARNING: TCP_SND_QUEUELEN must be at least as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work\n"));
-  if (TCP_SNDLOWAT >= TCP_SND_BUF)
-    LWIP_PLATFORM_DIAG(("lwip_sanity_check: WARNING: TCP_SNDLOWAT must be less than TCP_SND_BUF.\n"));
-  if (TCP_SNDQUEUELOWAT >= TCP_SND_QUEUELEN)
-    LWIP_PLATFORM_DIAG(("lwip_sanity_check: WARNING: TCP_SNDQUEUELOWAT must be less than TCP_SND_QUEUELEN.\n"));
-  if (TCP_WND > (PBUF_POOL_SIZE*PBUF_POOL_BUFSIZE))
-    LWIP_PLATFORM_DIAG(("lwip_sanity_check: WARNING: TCP_WND is larger than space provided by PBUF_POOL_SIZE*PBUF_POOL_BUFSIZE\n"));
-  if (TCP_WND < TCP_MSS)
-    LWIP_PLATFORM_DIAG(("lwip_sanity_check: WARNING: TCP_WND is smaller than MSS\n"));
-#endif /* LWIP_TCP */
-#if LWIP_SOCKET
-  /* Check that the SO_* socket options and SOF_* lwIP-internal flags match */
-  if (SO_ACCEPTCONN != SOF_ACCEPTCONN)
-    LWIP_PLATFORM_DIAG(("lwip_sanity_check: WARNING: SO_ACCEPTCONN != SOF_ACCEPTCONN\n"));
-  if (SO_REUSEADDR != SOF_REUSEADDR)
-    LWIP_PLATFORM_DIAG(("lwip_sanity_check: WARNING: SO_REUSEADDR != SOF_REUSEADDR\n"));
-  if (SO_KEEPALIVE != SOF_KEEPALIVE)
-    LWIP_PLATFORM_DIAG(("lwip_sanity_check: WARNING: SO_KEEPALIVE != SOF_KEEPALIVE\n"));
-  if (SO_BROADCAST != SOF_BROADCAST)
-    LWIP_PLATFORM_DIAG(("lwip_sanity_check: WARNING: SO_BROADCAST != SOF_BROADCAST\n"));
-  if (SO_LINGER != SOF_LINGER)
-    LWIP_PLATFORM_DIAG(("lwip_sanity_check: WARNING: SO_LINGER != SOF_LINGER\n"));
-#endif /* LWIP_SOCKET */
-}
-#else  /* LWIP_DEBUG */
-#define lwip_sanity_check()
-#endif /* LWIP_DEBUG */
-
-/**
- * Perform Sanity check of user-configurable values, and initialize all modules.
- */
-void
-lwip_init(void)
-{
-  /* Sanity check user-configurable values */
-  lwip_sanity_check();
-
-  /* Modules initialization */
-  stats_init();
-#if !NO_SYS
-  sys_init();
-#endif /* !NO_SYS */
-  mem_init();
-  memp_init();
-  pbuf_init();
-  netif_init();
-#if LWIP_SOCKET
-  lwip_socket_init();
-#endif /* LWIP_SOCKET */
-  ip_init();
-#if LWIP_ARP
-  etharp_init();
-#endif /* LWIP_ARP */
-#if LWIP_RAW
-  raw_init();
-#endif /* LWIP_RAW */
-#if LWIP_UDP
-  udp_init();
-#endif /* LWIP_UDP */
-#if LWIP_TCP
-  tcp_init();
-#endif /* LWIP_TCP */
-#if LWIP_SNMP
-  snmp_init();
-#endif /* LWIP_SNMP */
-#if LWIP_AUTOIP
-  autoip_init();
-#endif /* LWIP_AUTOIP */
-#if LWIP_IGMP
-  igmp_init();
-#endif /* LWIP_IGMP */
-#if LWIP_DNS
-  dns_init();
-#endif /* LWIP_DNS */
-
-#if LWIP_TIMERS
-  sys_timeouts_init();
-#endif /* LWIP_TIMERS */
-}