This library implements RC6 (protocol used by some philips remotes). It has a receiver class and a transmitter class. Currently, only mode 0 is supported. It is tested with my DVD/HDD recorder.
Diff: Rc6.h
- Revision:
- 0:f8e2ed766064
diff -r 000000000000 -r f8e2ed766064 Rc6.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Rc6.h Sun Feb 27 20:28:35 2011 +0000 @@ -0,0 +1,106 @@ +/* mbed RC6 (Philips remote control protocol) library + * Copyright (c) 2011 Jeroen Hilgers + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + + #ifndef __RC6_H__ + #define __RC6_H__ + + #include "mbed.h" + +/** RC6 (Philips remote control) receiver / transmitter library. + * + * Example: Code receiver for 'play/pause' on remote for Philips HDD&DVD recorder. + * + * Leader |S3|S2|S1|S0|Togl|A7|A6|A5|A4|A3|A2|A1|A0|D7|D6|D5|D4|D3|D2|D1|D0| + * |1 |0 |0 |0 |1 |0 |0 |1 |1 |0 |0 |1 |0 |0 |0 |1 |0 |1 |1 |0 |0 | + * | | | | | | | | | | | | | | | | | | | | | | + * ------ |- | -| -| -|-- | -| -|- |- | -| -|- | -| -| -|- | -|- |- | -| -| + * --| -|- |- |- | --|- |- | -| -|- |- | -|- |- |- | -|- | -| -|- |- | + * | | | | | | | | | | | | | | | | | | | | | | + * + * The toggle bit is in bit 16, A7-A0 in bits 15-8, D7-D0 in bits 7-0. + * Thus for the example, 0x1322C is returned. S3..S0 are not implemented + * and received / transmitted as shown in the example. + */ + + class Rc6Transmitter + { + public: + /** Create a Rc6Transmitter and initizalize it. + * + * @param pin irPin pin connected IR Led (led on on high level). + */ + Rc6Transmitter(PinName irPin); + + /** Send a code once. + * The function will return synchronously and send the code once. + * + * @param code Code to send. + */ + void Send(uint32_t code); + + /** Check if the transmitter is idle. + * + * @return True if transmitter still busy. + */ + bool IsBusy(); + + private: + void Tick(); + + bool mBusy; + uint16_t mPattern[50]; // 1 leader, 4 startbits, 1 toggle bit, 16 data bits ==> + // at most 24 mark / pause durations + 0,0 terminator = 50 entries. + Ticker mTicker; + uint16_t mMark; // Tick: Remaining half-cycles of mark. + uint16_t mPause; // Tick: Remaining half-cycles of pause. + uint16_t *mPatPtr; // Transitter pointer. + DigitalOut mOut; // Pin connected to IR. +}; + + class Rc6Receiver + { + public: + /** Create a Rc6Receiver and initizalize it. + * + * @param pin irPin pin connected to IR sensor (low level when IR is received, e.g. TSOP1736). + */ + Rc6Receiver(PinName irPin); + + /** Check if anything was received since last poll. Returns 0xFFFFFFFF if not. + * + * @return Last code received or 0xFFFFFFFF if nothing was received since last poll. + */ + uint32_t Receive(); + + private: + InterruptIn irq; + void OnRise(); + void OnFall(); + void OnTimeout(); + Timeout mTimeout; + Timer mTimer; + bool mBusy; + uint32_t mCode; + uint32_t mLastCode; + }; + + #endif // __RC6_H__ \ No newline at end of file