![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
test
Dependencies: Hepta2_9axis HeptaBattery Hepta_Serial HeptaTemp HeptaXbee SDHCFileSystem mbed
Fork of HEPTA2_ALL by
main.cpp
- Committer:
- hepta2ume
- Date:
- 2017-07-21
- Revision:
- 2:726072016da1
- Parent:
- 1:890188e041da
- Child:
- 3:4854731e663d
File content as of revision 2:726072016da1:
/* ************************************************************* H29/07_20/T.Umezawa 1:SD.....OK! 2:MPU9250(Accel) = 3:MPU9250(Gyro) = 4:MPU9250(Mag_compass) = 5:GPS sensing Mode = 6:CAM Mode = OK! 7:Temperature sensing = 8:Xbee mode = ************************************************************* */ #include "mbed.h" #include "SDHCFileSystem.h" #include "HeptaXbee.h" #include "HeptaSerial.h" #include "Hepta9axis.h" #include "HeptaTemp.h" #define USE_JPEG_HIGH_RESOLUTION 1 Serial pc(USBTX,USBRX); SDFileSystem sd(p5, p6, p7, p8, "fs"); HeptaXbee xbee(p9,p10); HeptaSerial camera(p13, p14); HeptaMPU9250 MPU9250(p28,p27,0xD0,0x18);//sda,scl,acc&gyro_address,mag_gyro HeptaTemp heptatemp(p17); DigitalOut CAM_SW(p25);//CAM_control DigitalOut GPS_SW(p24);//GPS_control int main() { char mode; pc.baud(9600); while(1) { /* ************ Mode select *********** */ pc.printf("\r\n"); pc.printf("*********************************\r\n"); pc.printf("Hello world.\r\n"); pc.printf("My name is HEPTA2\r\n"); pc.printf("Please select mode.\r\n"); pc.printf("1:SD test Mode\r\n"); pc.printf("2:Gyro sening ModeE\r\n"); pc.printf("3:Accel sensing Mode\r\n"); pc.printf("4:Magnet sensig Mode\r\n"); pc.printf("5:GPS sensing Mode\r\n"); pc.printf("6:CAM mode\r\n"); pc.printf("7:Temperature sensing Mode\r\n"); pc.printf("8:Xbee Mode\r\n"); pc.printf("9:Xbee & Temperature Mode\r\n");//恒温槽用 pc.printf("10:All Transmitting Mode Mode\r\n"); pc.printf("*********************************\r\n"); mode = pc.getc(); pc.printf("\r\n"); pc.printf("Your select Mode = %c\r\n",mode); wait(0.5); switch(mode) { case'1': { printf("=============\r\n"); printf("SD test Mode\r\n"); printf("=============\r\n"); FILE *fp = fopen("/fs/myfile.txt", "w"); if(fp == NULL) { pc.printf("Could not open file for write\r\n"); } else { fprintf(fp, "\n\rHello World!\n\r"); printf("SD Check Complete!!\r\n"); fclose(fp); } break; }//case'1' /* ****************** Gyro sensing mode ****************** */ case'2': { printf("===================\r\n"); printf("Gyro sensing Mode\r\n"); printf("===================\r\n"); float gx,gy,gz; for(int i = 0; i < 10; i++) { MPU9250.sen_gyro(&gx,&gy,&gz); pc.printf("GX = %f,GY = %f,GZ = %f\r\n",gx,gy,gz); wait(0.5); } break; }//case'2' /* ****************** Accel sensing mode ****************** */ case'3': { printf("===================\r\n"); printf("Accel sensing Mode\r\n"); printf("===================\r\n"); float ax,ay,az; for(int i = 0; i < 10; i++) { MPU9250.sen_acc(&ax,&ay,&az); pc.printf("AX = %f,AY = %f,AZ = %f\r\n",ax,ay,az); wait(0.5); } break; }//case'3' /* ****************** Magnet sensing mode ****************** */ case'4': { float mx,my,mz; printf("===================\r\n"); printf("Magnet sensing Mode\r\n"); printf("===================\r\n"); for(int i = 0; i < 10; i++) { MPU9250.sen_mag(&mx,&my,&mz); pc.printf("MX = %f,MY = %f,MZ = %f\r\n",mx,my,mz); wait(0.5); } break; }//case'4' /* ****************** Cam Snapshot mode ****************** */ case'6': { GPS_SW = 0; CAM_SW = 1; printf("\r\n"); printf("==========\r\n"); printf("CameraC1098\r\n"); printf("==========\r\n"); camera.Sync(); camera.initialize(HeptaSerial::Baud115200, HeptaSerial::JpegResolution320x240); camera.test_jpeg_snapshot_picture(1); break; }//case'6' /* ****************** Temp sensing mode ****************** */ case'7': { printf("==================\r\n"); printf("Temp sensing Mode\r\n"); printf("==================\r\n"); float temp; for(int i = 0; i<100; i++) { heptatemp.temp_sense(&temp); pc.printf("%f\r\n",temp); //xbee.printf("%f\r\n",temp); } break; }//case'7' /* *********** Xbee mode *********** */ case'8': { int i=0,rcmd=0,cmdflag=0; xbee.printf("Count Up!\r"); while(1) { xbee.printf("num = %d\r",i); i++; wait(1.0); xbee.xbee_recieve(&rcmd,&cmdflag); pc.printf("rcmd=%d, cmdflag=%d\r\n",rcmd, cmdflag); if (cmdflag == 1) { if (rcmd == 'a') { pc.printf("Command Get %d\r\n",rcmd); xbee.printf("HEPTA Uplink OK\r"); } xbee.initialize(); } } break; }//case'8' /* ****************** Temp sensing mode by Xbbe ****************** */ case'9': { printf("==================\r\n"); printf("Temp sensing Mode & Xbee\r\n"); printf("==================\r\n"); float temp; //FILE *fp = fopen("/fs/myfile.csv", "a"); // if(fp == NULL) { // pc.printf("Could not open file for write\r\n"); // } else { while(1) { //for(int i = 0; i<100; i++) { FILE *fp = fopen("/fs/myfile.csv", "a"); heptatemp.temp_sense(&temp); pc.printf("%f\r\n",temp); xbee.printf("%f\r\n",temp); fprintf(fp, "%f\n",temp); fclose(fp); } // fclose(fp); // } break; }//case'9' /* ********************* All Transmitting Mode ********************* */ case'a': { printf("==================\r\n"); printf("All Transmitting Mode\r\n"); printf("==================\r\n"); char gx[4],gy[4],gz[4],ax[4],ay[4],az[4],mx[4],my[4],mz[4],lad[8],log[8],bt[4],temp[4]; char ddata[60]; int dsize[6]; while(1) { /* MPU9250.sen_gyro_u16(gx,gy,gz,&dsize[0]); MPU9250.sen_acc_u16(ax,ay,az,&dsize[1]); MPU9250.sen_mag_u16(mx,my,mz,&dsize[2]); gps.sensing_u16(lad,log,&dsize[3]); battery.vol_u16(bt,&dsize[4]); heptatemp.temp_sense_u16(temp,&dsize[5]); */ //gyro.x_u16(gx,4); xbee.xbee_transmit(ddata,60,gx,gy,gz,ax,ay,az,mx,my,mz,lad,log,bt,temp,dsize[0],dsize[0],dsize[0],dsize[1],dsize[1],dsize[1],dsize[2],dsize[2],dsize[2],dsize[3],dsize[3],dsize[4],dsize[5],13); } break; }//case'9' /* ****************** Cam Snapshot mode ****************** */ case'b': { GPS_SW = 0; CAM_SW = 1; printf("\r\n"); printf("==========\r\n"); printf("CameraC1098\r\n"); printf("==========\r\n"); camera.Sync(); camera.initialize(HeptaSerial::Baud115200, HeptaSerial::JpegResolution320x240); camera.test_jpeg_snapshot_data(1); break; }//case'6' default: break; } } }