Revision 5:195cb8367908, committed 2016-01-15

Comitter:

henr22

Date:

Fri Jan 15 19:15:01 2016 +0000

Parent:

4:9382162fdb60

Commit message:

Clock to use with LCD N5110. N5110 library is necessary.;

Changed in this revision

diff -r 9382162fdb60 -r 195cb8367908 NOKIA_5110.cpp
--- a/NOKIA_5110.cpp	Fri Jan 15 19:13:13 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,173 +0,0 @@
-// Project: Nokia5110 - Controlling a NK5110 display from an NXP LPC1768
-// File: NOKIA_5110.cpp
-// Author: Chris Yan
-// Created: January, 2012
-// Revised: January, 2014
-//  Desc: Supporting code for the NokiaLcd class
-
-#include "NOKIA_5110.h"
-#include "mbed.h"
-
-NokiaLcd::NokiaLcd(LcdPins pinout)
-{
-    // SPI
-    LcdSpi = new SPI(pinout.mosi, pinout.miso, pinout.sclk);
-    LcdSpi->format(LCD_SPI_BITS, LCD_SPI_MODE);
-    LcdSpi->frequency(LCD_FREQ);
-    
-    // Control Pins
-    Pins = new DigitalOut*[3];
-    Pins[PIN_RST]   = new DigitalOut(pinout.rst);
-    Pins[PIN_SCE]   = new DigitalOut(pinout.sce);
-    Pins[PIN_DC]    = new DigitalOut(pinout.dc);
-    
-    // Initial Command Instructions, note the initial command mode
-    FunctionSet.V   = CMD_FS_HORIZONTAL_MODE;
-    FunctionSet.H   = CMD_FS_EXTENDED_MODE;
-    FunctionSet.PD  = CMD_FS_ACTIVE_MODE;
-    FunctionChar    = CreateFunctionChar();
-    
-    TempControlChar = CMD_TC_TEMP_2;
-    DispControlChar = CMD_DC_NORMAL_MODE;
-    BiasChar        = CMD_BI_MUX_48;
-    VopChar         = CMD_VOP_7V38;
-}
-
-void NokiaLcd::ShutdownLcd()
-{
-    FunctionSet.PD  = CMD_FS_POWER_DOWN_MODE;
-
-    ClearLcdMem();
-    SendFunction( CMD_DC_CLEAR_DISPLAY );
-    SendFunction( CreateFunctionChar() );
-}
-
-void NokiaLcd::ClearLcdMem()
-{
-    for(int tick = 0; tick <= 503; tick++)
-        LcdSpi->write(0x00);
-}
-
-void NokiaLcd::TestLcd(char test_pattern)
-{
-    for(int tick = 0; tick <= 503; tick++)
-        LcdSpi->write(test_pattern);         // Command gets sent
-}
-
-void NokiaLcd::InitLcd()
-{
-    ResetLcd();
-    Pins[PIN_SCE]->write(0);     // Chip Select goes low
-    
-    // Redefine the FunctionChar in case it has changed
-    FunctionSet.V   = CMD_FS_HORIZONTAL_MODE;
-    FunctionSet.H   = CMD_FS_EXTENDED_MODE;
-    FunctionSet.PD  = CMD_FS_ACTIVE_MODE;
-    SendFunction( CreateFunctionChar() );   // Extended CMD set
-    SendFunction( VopChar );                // | Vop
-    SendFunction( TempControlChar );        // | Temp
-    SendFunction( BiasChar );               // | Bias
-
-    FunctionSet.H   = CMD_FS_BASIC_MODE;
-    SendFunction( CreateFunctionChar() );   // Basic CMD set
-    SendFunction( DispControlChar );        // | Display Mode
-    
-    ClearLcdMem();
-    Pins[PIN_DC]->write(1);     // Data/CMD goes back to Data mode
-}
-
-void NokiaLcd::ResetLcd()
-{
-    Pins[PIN_RST]->write(0);    // Reset goes low
-    Pins[PIN_RST]->write(1);    // Reset goes high
-}
-
-char NokiaLcd::CreateFunctionChar()
-{
-    return ( 0x20 | FunctionSet.PD | FunctionSet.V | FunctionSet.H );
-}
-
-void NokiaLcd::SendDrawData(char data)
-{
-    LcdSpi->write(data);         // Command gets sent
-}
-
-void NokiaLcd::DrawChar(char character)
-{
-    for( int i = 0; i < 6; i++)
-        SendDrawData( FONT_6x6[ ((character - 32)*6) + i] );
-}
-
-void NokiaLcd::DrawString(char* s)
-{
-    char len = strlen(s);
-    for( int idx = 0; idx < len; idx++ )
-    {
-        for( int i = 0; i < 6; i++)
-            SendDrawData( FONT_6x6[ ((s[idx] - 32)*6) + i] );
-    }
-}
-
-void NokiaLcd::DrawFrameChar(char character)
-{
-    for( int i = 0; i < 6; i++)
-        SendDrawData((( FONT_6x6[ ((character - 32)*6) + i]  ) << 1 ) | 0x81);
-}
-
-void NokiaLcd::DrawNegFrameChar(char character)
-{
-    for( int i = 0; i < 6; i++)
-        SendDrawData(~(( FONT_6x6[ ((character - 32)*6) + i]  ) << 1 ) | 0x81);
-}
-
-char* NokiaLcd::NumToStr(int num)
-{
-    if(num <= 0)
-        return "0";
-
-    double length = 0;
-    int tlen = 0;
-    int temp = 1;
-    char c;
-    
-    // Get number of digits
-    while( temp <= num )
-    {
-        temp *= 10;
-        length++;
-    }
-    tlen = length;
-    char* numString = new char[tlen+1];
-    
-    // Convert each place in number to a stand-alone representative number
-    temp = 0;
-    for(int idx = pow(10, length); idx>1; idx = (idx/10))
-    {
-        c = (char)( ((num % idx)-(num % (idx/10)))/(idx/10) + 48);
-        numString[temp] = c;
-        temp++;
-    }
-    numString[temp] = '\0';
-    return numString;
-}
-
-void NokiaLcd::SetXY(char x, char y)
-{
-    if( (x > 83) || (y > 5) )
-        return;
-
-    SendFunction( x | 0x80 );
-    SendFunction( y | 0x40 );
-}
-
-void NokiaLcd::SendFunction(char cmd) //TODO:Detection of what H should be
-{
-    Pins[PIN_DC]->write(0);     // Data/CMD goes low
-    LcdSpi->write(cmd);         // Command gets sent
-    Pins[PIN_DC]->write(1);     // Data/CMD goes back to Data mode
-}
-
-NokiaLcd::~NokiaLcd()
-{
-    ShutdownLcd();
-}

diff -r 9382162fdb60 -r 195cb8367908 NOKIA_5110.h
--- a/NOKIA_5110.h	Fri Jan 15 19:13:13 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,238 +0,0 @@
-// Project: Nokia5110 - Controlling a NK5110 display from an NXP LPC1768
-// File: NOKIA_5110.h
-// Author: Chris Yan
-// Created: January, 2012
-// Revised: January, 2014
-//  Desc: Commands, fonts, and class for using a
-//      Nokia 5110 LCD via the Phillips 8554 LCD driver.
-// 
-//  Typical Usage: User must fill the LcdPins struct with the pinout used to control the LCD and
-//      instantiate the NokiaLcd class - passing the created LcdPins struct to the constructor.
-//      The class function NokiaLcd::InitLcd may then be called to reset and start the LCD driver.
-//      A simple 6x6 font (6x8 in LCD space and ~5x5 character space) is included to facilitate 
-//      the NokiaLcd::DrawChar( char character ) function, which will copy the character 8 bits 
-//      at a time for 6 clock cycles.
-//                 Commands may be sent to the LCD via the NokiaLcd::SendFunction(char cmd) 
-//      function, but be aware that certain commands require the Function Set register's H-value
-//      to be either 1 or 0, depending on the command. This class does not check to see whether
-//      the H-value is of proper status. The Function Set register /may/ be changed via the 
-//      NokiaLcd::SendFunction(char cmd), but the code uses this internally and expects that
-//      most function registers have not been changed by the user.
-//
-//      Example:
-//          #include "mbed.h"
-//          #include "NOKIA_5110.h"
-//
-//          int main() {
-//              LcdPins myLcdPins = { p11, NC, p13, p10, p8, p9 };
-//              NokiaLcd myLcd( myLcdPins );    // SPI is started here (8-bits, mode 1)
-//              myLcd.InitLcd();                // LCD is reset and DDRAM is cleared
-//              myLcd.TestLcd( 0xAA );          // Draws a vertical pattern where every other pixel is on 
-//              wait(10);                       
-//              myLcd.ShutdownLcd();            // Clears the LCD's DDRAM and powers it down via CMD_FS_POWER_DOWN_MODE, H=0
-//              while(1)
-//              {   };
-//          }
-
-// Command Instructions
-//       H = 0
-#ifndef __NOKIA_5110_H__
-#define __NOKIA_5110_H__
-
-// Command Instructions
-//       H = 0
-#define CMD_DC_CLEAR_DISPLAY   0x08
-#define CMD_DC_NORMAL_MODE     0x0C
-#define CMD_DC_FILL_DISPLAY    0x09
-#define CMD_DC_INVERT_VIDEO    0x0D
-#define CMD_FS_HORIZONTAL_MODE 0x00
-#define CMD_FS_VERTICAL_MODE   0x02
-#define CMD_FS_BASIC_MODE      0x00
-#define CMD_FS_EXTENDED_MODE   0x01
-#define CMD_FS_ACTIVE_MODE     0x00
-#define CMD_FS_POWER_DOWN_MODE 0x04
-//       H = 1
-#define CMD_TC_TEMP_0          0x04
-#define CMD_TC_TEMP_1          0x05
-#define CMD_TC_TEMP_2          0x06
-#define CMD_TC_TEMP_3          0x07
-#define CMD_BI_MUX_24          0x15
-#define CMD_BI_MUX_48          0x13
-#define CMD_BI_MUX_100         0x10
-#define CMD_VOP_6V06           0xB2
-#define CMD_VOP_7V38           0xC8
-
-// LCD Characteristics
-#define LCD_FREQ 2000000
-#define LCD_SPI_MODE 0x01
-#define LCD_SPI_BITS 0x08
-#define LCD_X_MAX 84
-#define LCD_Y_MAX 48
-
-#define PIN_RST  0x00
-#define PIN_SCE  0x01
-#define PIN_DC   0x02
-
-#include "mbed.h"
-
-struct LcdPins
-{
-    PinName mosi;
-    PinName miso;
-    PinName sclk;
-    PinName dc;
-    PinName sce;
-    PinName rst;
-};
-
-struct LcdFunctionSet
-{
-    char PD;
-    char V;
-    char H;
-};
-
-typedef char LcdFunctionChar;
-typedef char LcdTempControl;
-typedef char LcdDispControl;
-typedef char LcdBiasChar;
-typedef char LcdVopChar;
-
-class NokiaLcd
-{
-    public:
-        NokiaLcd(LcdPins lcd_pinout);
-        ~NokiaLcd();
-        
-    public:
-        void InitLcd();
-        void ClearLcdMem();
-        void ShutdownLcd();
-        void SendFunction(char cmd);
-        void TestLcd(char test_pattern);
-        void SendDrawData(char data);
-        
-    public:
-        void DrawString(char* str);
-        void DrawChar(char character);
-        void SetXY(char x, char y);
-        void DrawFrameChar(char character);
-        void DrawNegFrameChar(char character);
-        char* NumToStr(int num);
-        
-    private:
-        char CreateFunctionChar();
-        void ResetLcd();
-        
-    private:
-        LcdFunctionChar FunctionChar;
-        LcdTempControl  TempControlChar;
-        LcdDispControl  DispControlChar;
-        LcdFunctionSet  FunctionSet;
-        LcdBiasChar     BiasChar;
-        LcdVopChar      VopChar;
-        DigitalOut**    Pins;
-        SPI*            LcdSpi;
-        
-};
-
-const char FONT_6x6[570] = //should be 564 total char
-{
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // SPACE   1   
- 0x00, 0x06, 0x2F, 0x06, 0x00, 0x00, // !   2
- 0x00, 0x06, 0x00, 0x06, 0x00, 0x00, // "   3
- 0x14, 0x3E, 0x14, 0x3E, 0x14, 0x00, // #   4
- 0x2E, 0x2A, 0x3F, 0x2A, 0x3A, 0x00, // $   5
- 0x26, 0x16, 0x08, 0x34, 0x32, 0x00, // %   6
- 0x34, 0x2A, 0x3C, 0x18, 0x28, 0x00, // &   7
- 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, // '   8
- 0x00, 0x00, 0x1C, 0x36, 0x22, 0x00, // (   9
- 0x22, 0x36, 0x1C, 0x00, 0x00, 0x00, // )   10
- 0x24, 0x18, 0x0E, 0x18, 0x24, 0x00, // *   11
- 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, // +   12
- 0x20, 0x30, 0x00, 0x00, 0x00, 0x00, // ,   13
- 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, // -   14
- 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, // .   15
- 0x30, 0x18, 0x0C, 0x06, 0x00, 0x00, // /   16
- 0x00, 0x1C, 0x22, 0x22, 0x1C, 0x00, // 0   17
- 0x00, 0x24, 0x3E, 0x20, 0x00, 0x00, // 1   18
- 0x3A, 0x2A, 0x2A, 0x2A, 0x2E, 0x00, // 2   19
- 0x22, 0x2A, 0x2A, 0x2A, 0x3E, 0x00, // 3   20
- 0x0E, 0x08, 0x08, 0x3E, 0x08, 0x00, // 4   21
- 0x2E, 0x2A, 0x2A, 0x2A, 0x3A, 0x00, // 5   22
- 0x3E, 0x2A, 0x2A, 0x2A, 0x3A, 0x00, // 6   23
- 0x22, 0x12, 0x0A, 0x06, 0x02, 0x00, // 7   24
- 0x3E, 0x2A, 0x2A, 0x2A, 0x3E, 0x00, // 8   25
- 0x00, 0x2E, 0x2A, 0x2A, 0x3E, 0x00, // 9   26
- 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, // :   27
- 0x00, 0x20, 0x14, 0x00, 0x00, 0x00, // ;   28
- 0x00, 0x00, 0x08, 0x14, 0x22, 0x00, // <   29
- 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, // =   30
- 0x22, 0x14, 0x08, 0x00, 0x00, 0x00, // >   31
- 0x06, 0x01, 0x2D, 0x06, 0x00, 0x00, // ?   32
- 0x1E, 0x23, 0x19, 0x35, 0x3E, 0x00, // @   33
- 0x3C, 0x0A, 0x0A, 0x0A, 0x3C, 0x00, // A   34
- 0x3E, 0x2A, 0x2A, 0x2A, 0x1C, 0x00, // B   35
- 0x1C, 0x22, 0x22, 0x22, 0x22, 0x00, // C   36
- 0x3E, 0x22, 0x22, 0x22, 0x1C, 0x00, // D   37
- 0x3E, 0x2A, 0x2A, 0x2A, 0x22, 0x00, // E   38
- 0x3E, 0x0A, 0x0A, 0x0A, 0x02, 0x00, // F   39
- 0x1C, 0x22, 0x2A, 0x2A, 0x18, 0x00, // G   40
- 0x3E, 0x08, 0x08, 0x08, 0x3E, 0x00, // H
- 0x22, 0x22, 0x3E, 0x22, 0x22, 0x00, // I
- 0x10, 0x22, 0x22, 0x1E, 0x02, 0x00, // J
- 0x3E, 0x08, 0x14, 0x22, 0x00, 0x00, // K
- 0x00, 0x3E, 0x20, 0x20, 0x20, 0x00, // L   45
- 0x3E, 0x04, 0x08, 0x04, 0x3E, 0x00, // M
- 0x3C, 0x02, 0x02, 0x02, 0x3C, 0x00, // N
- 0x1C, 0x22, 0x22, 0x22, 0x1C, 0x00, // O
- 0x3E, 0x0A, 0x0A, 0x04, 0x00, 0x00, // P
- 0x1C, 0x22, 0x32, 0x3C, 0x20, 0x00, // Q   50
- 0x3E, 0x0A, 0x0A, 0x1A, 0x24, 0x00, // R
- 0x24, 0x2A, 0x2A, 0x2A, 0x12, 0x00, // S
- 0x02, 0x02, 0x3E, 0x02, 0x02, 0x00, // T
- 0x1E, 0x20, 0x20, 0x20, 0x1E, 0x00, // U
- 0x06, 0x18, 0x20, 0x18, 0x06, 0x00, // V   55
- 0x0E, 0x30, 0x18, 0x30, 0x0E, 0x00, // W
- 0x22, 0x14, 0x08, 0x14, 0x22, 0x00, // X
- 0x02, 0x04, 0x38, 0x04, 0x02, 0x00, // Y
- 0x22, 0x32, 0x2A, 0x26, 0x22, 0x00, // Z
- 0x00, 0x00, 0x00, 0x3E, 0x22, 0x00, // [   60
- 0x06, 0x0C, 0x18, 0x30, 0x00, 0x00, // backslash
- 0x22, 0x3E, 0x00, 0x00, 0x00, 0x00, // ]
- 0x00, 0x04, 0x02, 0x02, 0x04, 0x00, // ^
- 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, // _
- 0x00, 0x00, 0x04, 0x08, 0x00, 0x00, // `   65
- 0x18, 0x24, 0x14, 0x38, 0x00, 0x00, // a
- 0x1E, 0x28, 0x28, 0x10, 0x00, 0x00, // b
- 0x18, 0x24, 0x24, 0x00, 0x00, 0x00, // c
- 0x10, 0x28, 0x28, 0x1E, 0x00, 0x00, // d
- 0x18, 0x2C, 0x2C, 0x08, 0x00, 0x00, // e   70
- 0x00, 0x3C, 0x12, 0x04, 0x00, 0x00, // f
- 0x24, 0x2A, 0x1E, 0x00, 0x00, 0x00, // g
- 0x3E, 0x08, 0x30, 0x00, 0x00, 0x00, // h
- 0x00, 0x3A, 0x00, 0x00, 0x00, 0x00, // i
- 0x10, 0x20, 0x1A, 0x00, 0x00, 0x00, // j   75
- 0x3E, 0x10, 0x2C, 0x20, 0x00, 0x00, // k
- 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, // l
- 0x38, 0x08, 0x18, 0x08, 0x30, 0x00, // m
- 0x30, 0x08, 0x08, 0x30, 0x00, 0x00, // n
- 0x10, 0x28, 0x28, 0x10, 0x00, 0x00, // o   80
- 0x38, 0x14, 0x14, 0x08, 0x00, 0x00, // p
- 0x08, 0x14, 0x14, 0x38, 0x00, 0x00, // q
- 0x3C, 0x08, 0x04, 0x00, 0x00, 0x00, // r
- 0x2C, 0x34, 0x00, 0x00, 0x00, 0x00, // s
- 0x08, 0x3C, 0x28, 0x00, 0x00, 0x00, // t   85
- 0x18, 0x20, 0x20, 0x18, 0x00, 0x00, // u
- 0x08, 0x10, 0x20, 0x10, 0x08, 0x00, // v
- 0x18, 0x20, 0x10, 0x20, 0x18, 0x00, // w
- 0x28, 0x10, 0x28, 0x00, 0x00, 0x00, // x
- 0x2C, 0x30, 0x1C, 0x00, 0x00, 0x00, // y   90
- 0x24, 0x34, 0x2C, 0x24, 0x00, 0x00, // z
- 0x00, 0x00, 0x08, 0x3E, 0x22, 0x00, // {
- 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, // |
- 0x22, 0x3E, 0x08, 0x00, 0x00, 0x00, // }
- 0x10, 0x08, 0x18, 0x10, 0x08, 0x00, // ~   95
-};
-
-#endif