RA8875 - Forked para SNOCC

Users » gstedile » Code » RA8875

Guillermo Stedile / RA8875

Forked para SNOCC

Dependencies: GPS

Dependents: SNOCC_V1 SNOCC_V2

Fork of RA8875 by SNOCC

RA8875.h@88:bfddef6ec836, 2015-01-19 (annotated)

Committer:: WiredHome
Date:: Mon Jan 19 15:44:41 2015 +0000
Revision:: 88:bfddef6ec836
Parent:: 87:ee2240581aa7
Child:: 90:d113d71ae4f0

Added a timeout to the touch calibration process, so that it will return if there is no touchscreen, user not present, or a stuck touchscreen.

Who changed what in which revision?

User	Revision	Line number	New contents of line
WiredHome	78:faf49c381591	1	///
WiredHome	78:faf49c381591	2	/// @mainpage RA8875 Display Controller Driver library
WiredHome	78:faf49c381591	3	///
WiredHome	78:faf49c381591	4	/// The RA8875 Display controller is a powerful interface for low cost displays. It
WiredHome	78:faf49c381591	5	/// can support displays up to 800 x 600 pixels x 16-bit color. Another common
WiredHome	78:faf49c381591	6	/// implementation is 480 x 272 x 16 with two layers. The two layers can be
WiredHome	78:faf49c381591	7	/// exchanged, or blended in various ways (transparency, OR, AND, and more).
WiredHome	78:faf49c381591	8	/// It includes graphics acceleration capabilities for drawing primitives,
WiredHome	78:faf49c381591	9	/// such as line, rectangle, circles, and more.
WiredHome	78:faf49c381591	10	///
WiredHome	78:faf49c381591	11	/// The controller additionally supports backlight control (via PWM), keypad scanning
WiredHome	78:faf49c381591	12	/// (for a 4 x 5 matrix) and resistive touch-panel support.
WiredHome	78:faf49c381591	13	///
WiredHome	78:faf49c381591	14	/// @section Display_Config Display Configuration
WiredHome	78:faf49c381591	15	///
WiredHome	78:faf49c381591	16	/// This section details basics for bringing the display online. At a minimum,
WiredHome	78:faf49c381591	17	/// the display is instantiated. After that any of the available commands
WiredHome	78:faf49c381591	18	/// may be issued.
WiredHome	78:faf49c381591	19	///
WiredHome	78:faf49c381591	20	/// During the instantiation, the display is powered on, cleared, and the backlight
WiredHome	78:faf49c381591	21	/// is energized. Additionally, the keypad and touchscreen features are activated.
WiredHome	78:faf49c381591	22	/// It is important to keep in mind that the keypad had the default mapping, and
WiredHome	78:faf49c381591	23	/// the touchscreen does not have the calibration matrix configured, so additional
WiredHome	78:faf49c381591	24	/// steps may be necessary.
WiredHome	78:faf49c381591	25	///
WiredHome	78:faf49c381591	26	/// @code
WiredHome	78:faf49c381591	27	/// RA8875 lcd(p5, p6, p7, p12, NC, "tft");
WiredHome	81:01da2e34283d	28	/// lcd.init();
WiredHome	78:faf49c381591	29	/// lcd.foreground(Blue);
WiredHome	78:faf49c381591	30	/// lcd.line(0,0, 479,271);
WiredHome	78:faf49c381591	31	/// ...
WiredHome	78:faf49c381591	32	/// @endcode
WiredHome	78:faf49c381591	33	///
WiredHome	78:faf49c381591	34	/// @section Touch_Panel Touch Panel
WiredHome	78:faf49c381591	35	///
WiredHome	78:faf49c381591	36	/// The supported touch panel interface is for a resistive panel, and is natively
WiredHome	78:faf49c381591	37	/// supported by the RA8875 controller. There are a few steps to enable this interface.
WiredHome	78:faf49c381591	38	///
WiredHome	78:faf49c381591	39	/// @subsection Touch_Panel_Enable Touch Panel Enable
WiredHome	78:faf49c381591	40	///
WiredHome	78:faf49c381591	41	/// @see TouchPanelInit has two forms - fully automatic, and controlled. See the APIs for
WiredHome	78:faf49c381591	42	/// details.
WiredHome	78:faf49c381591	43	///
WiredHome	78:faf49c381591	44	/// @subsection Touch_Panel_Calibration
WiredHome	78:faf49c381591	45	///
WiredHome	78:faf49c381591	46	/// The touch panel is not initially calibrated on startup. The application should
WiredHome	78:faf49c381591	47	/// provide a means to activate the calibration process, and that should not require
WiredHome	78:faf49c381591	48	/// the touchscreen as it may not yet be usable. Alternately, a calibration matrix
WiredHome	78:faf49c381591	49	/// can be loaded from non-volatile and installed.
WiredHome	78:faf49c381591	50	///
WiredHome	78:faf49c381591	51	/// @section Keypad Keypad
WiredHome	78:faf49c381591	52	///
WiredHome	78:faf49c381591	53	/// The keypad has a default keypad mapping, but there is an API that permits
WiredHome	78:faf49c381591	54	/// installing a custom keymap.
WiredHome	78:faf49c381591	55	///
WiredHome	19:3f82c1161fd2	56	#ifndef RA8875_H
WiredHome	19:3f82c1161fd2	57	#define RA8875_H
WiredHome	19:3f82c1161fd2	58	#include <mbed.h>
WiredHome	19:3f82c1161fd2	59
WiredHome	77:9206c13aa527	60	#include "RA8875_Regs.h"
WiredHome	19:3f82c1161fd2	61	#include "GraphicsDisplay.h"
WiredHome	19:3f82c1161fd2	62
WiredHome	41:2956a0a221e5	63	#define RA8875_DEFAULT_SPI_FREQ 5000000
WiredHome	19:3f82c1161fd2	64
WiredHome	19:3f82c1161fd2	65	// Define this to enable code that monitors the performance of various
WiredHome	19:3f82c1161fd2	66	// graphics commands.
WiredHome	78:faf49c381591	67	//#define PERF_METRICS
WiredHome	19:3f82c1161fd2	68
WiredHome	23:a50ded45dbaf	69	// What better place for some test code than in here and the companion
WiredHome	23:a50ded45dbaf	70	// .cpp file. See also the bottom of this file.
WiredHome	79:544eb4964795	71	//#define TESTENABLE
WiredHome	19:3f82c1161fd2	72
WiredHome	19:3f82c1161fd2	73	/// DOS colors - slightly color enhanced
WiredHome	20:6e2e4a8372eb	74	#define Black (color_t)(RGB(0,0,0))
WiredHome	20:6e2e4a8372eb	75	#define Blue (color_t)(RGB(0,0,187))
WiredHome	20:6e2e4a8372eb	76	#define Green (color_t)(RGB(0,187,0))
WiredHome	20:6e2e4a8372eb	77	#define Cyan (color_t)(RGB(0,187,187))
WiredHome	20:6e2e4a8372eb	78	#define Red (color_t)(RGB(187,0,0))
WiredHome	20:6e2e4a8372eb	79	#define Magenta (color_t)(RGB(187,0,187))
WiredHome	81:01da2e34283d	80	#define Brown (color_t)(RGB(63,63,0))
WiredHome	20:6e2e4a8372eb	81	#define Gray (color_t)(RGB(187,187,187))
WiredHome	20:6e2e4a8372eb	82	#define Charcoal (color_t)(RGB(85,85,85))
WiredHome	62:ba5d33438fda	83	#define BrightBlue (color_t)(RGB(0,0,255))
WiredHome	62:ba5d33438fda	84	#define BrightGreen (color_t)(RGB(0,255,0))
WiredHome	62:ba5d33438fda	85	#define BrightCyan (color_t)(RGB(0,255,255))
WiredHome	62:ba5d33438fda	86	#define BrightRed (color_t)(RGB(255,0,0))
WiredHome	20:6e2e4a8372eb	87	#define Orange (color_t)(RGB(255,85,85))
WiredHome	20:6e2e4a8372eb	88	#define Pink (color_t)(RGB(255,85,255))
WiredHome	81:01da2e34283d	89	#define Yellow (color_t)(RGB(187,187,0))
WiredHome	20:6e2e4a8372eb	90	#define White (color_t)(RGB(255,255,255))
WiredHome	20:6e2e4a8372eb	91
WiredHome	62:ba5d33438fda	92	#define DarkBlue (color_t)(RGB(0,0,63))
WiredHome	62:ba5d33438fda	93	#define DarkGreen (color_t)(RGB(0,63,0))
WiredHome	62:ba5d33438fda	94	#define DarkCyan (color_t)(RGB(0,63,63))
WiredHome	62:ba5d33438fda	95	#define DarkRed (color_t)(RGB(63,0,0))
WiredHome	62:ba5d33438fda	96	#define DarkMagenta (color_t)(RGB(63,0,63))
WiredHome	62:ba5d33438fda	97	#define DarkBrown (color_t)(RGB(63,63,0))
WiredHome	62:ba5d33438fda	98	#define DarkGray (color_t)(RGB(63,63,63))
WiredHome	61:8f3153bf0baa	99
WiredHome	82:f7d300f26540	100	#define min(a,b) ((a<b)?a:b)
WiredHome	82:f7d300f26540	101	#define max(a,b) ((a>b)?a:b)
WiredHome	82:f7d300f26540	102
WiredHome	19:3f82c1161fd2	103
WiredHome	19:3f82c1161fd2	104	//namespace SW_graphics
WiredHome	19:3f82c1161fd2	105	//{
WiredHome	19:3f82c1161fd2	106
WiredHome	24:8ca861acf12d	107
WiredHome	21:3c1efb192927	108	/// This is a graphics library for the Raio RA8875 Display Controller chip
WiredHome	21:3c1efb192927	109	/// attached to a 4-wire SPI interface.
WiredHome	21:3c1efb192927	110	///
WiredHome	56:7a85d226ad0d	111	/// It offers both primitive and high level APIs.
WiredHome	56:7a85d226ad0d	112	///
WiredHome	21:3c1efb192927	113	/// Central to this API is a coordinate system, where the origin (0,0) is in
WiredHome	56:7a85d226ad0d	114	/// the top-left corner of the display, and the width (x) extends positive to the
WiredHome	56:7a85d226ad0d	115	/// right and the height (y) extends positive toward the bottom.
WiredHome	21:3c1efb192927	116	///
WiredHome	56:7a85d226ad0d	117	/// @caution As there are both graphics and text commands, one must take care to use
WiredHome	21:3c1efb192927	118	/// the proper coordinate system for each. Some of the text APIs are in units
WiredHome	29:422616aa04bd	119	/// of column and row, which is measured in character positions (and dependent
WiredHome	56:7a85d226ad0d	120	/// on the font size), where other text APIs permit pixel level positioning.
WiredHome	56:7a85d226ad0d	121	///
WiredHome	56:7a85d226ad0d	122	/// @code
WiredHome	56:7a85d226ad0d	123	/// #include "RA8875.h"
WiredHome	56:7a85d226ad0d	124	/// RA8875 lcd(p5, p6, p7, p12, NC, "tft");
WiredHome	56:7a85d226ad0d	125	///
WiredHome	56:7a85d226ad0d	126	/// int main()
WiredHome	56:7a85d226ad0d	127	/// {
WiredHome	81:01da2e34283d	128	/// lcd.init();
WiredHome	56:7a85d226ad0d	129	/// lcd.printf("printing 3 x 2 = %d", 3*2);
WiredHome	56:7a85d226ad0d	130	/// lcd.circle( 400,25, 25, BrightRed);
WiredHome	56:7a85d226ad0d	131	/// lcd.fillcircle( 400,25, 15, RGB(128,255,128));
WiredHome	56:7a85d226ad0d	132	/// lcd.ellipse( 440,75, 35,20, BrightBlue);
WiredHome	56:7a85d226ad0d	133	/// lcd.fillellipse( 440,75, 25,10, Blue);
WiredHome	56:7a85d226ad0d	134	/// lcd.triangle( 440,100, 475,110, 450,125, Magenta);
WiredHome	56:7a85d226ad0d	135	/// lcd.filltriangle( 445,105, 467,111, 452,120, Cyan);
WiredHome	56:7a85d226ad0d	136	/// lcd.rect( 400,130, 475,155, Brown);
WiredHome	56:7a85d226ad0d	137	/// lcd.fillrect( 405,135, 470,150, Pink);
WiredHome	56:7a85d226ad0d	138	/// lcd.roundrect( 410,160, 475,190, 10,8, Yellow);
WiredHome	56:7a85d226ad0d	139	/// lcd.fillroundrect(415,165, 470,185, 5,3, Orange);
WiredHome	56:7a85d226ad0d	140	/// lcd.line( 430,200, 460,230, RGB(0,255,0));
WiredHome	56:7a85d226ad0d	141	/// for (int i=0; i<=30; i+=5)
WiredHome	56:7a85d226ad0d	142	/// lcd.pixel(435+i,200+i, White);
WiredHome	56:7a85d226ad0d	143	/// }
WiredHome	56:7a85d226ad0d	144	/// @endcode
WiredHome	29:422616aa04bd	145	///
WiredHome	31:c72e12cd5c67	146	/// @todo Add Scroll support for text.
WiredHome	37:f19b7e7449dc	147	/// @todo Improve sync between internal and external font support - cursor, window, scroll.
WiredHome	75:ca78388cfd77	148	/// @todo Add Hardware reset signal - but testing to date indicates it is not needed.
WiredHome	44:207594dece70	149	/// @todo Add high level objects - x-y graph, meter, others... but these will
WiredHome	44:207594dece70	150	/// probably be best served in another class, since they may not
WiredHome	44:207594dece70	151	/// be needed for many uses.
WiredHome	21:3c1efb192927	152	///
WiredHome	19:3f82c1161fd2	153	class RA8875 : public GraphicsDisplay
WiredHome	19:3f82c1161fd2	154	{
WiredHome	19:3f82c1161fd2	155	public:
WiredHome	53:86d24b9480b9	156	/// cursor type to be shown as the text cursor.
WiredHome	53:86d24b9480b9	157	typedef enum
WiredHome	53:86d24b9480b9	158	{
WiredHome	53:86d24b9480b9	159	NOCURSOR, ///< cursor is hidden
WiredHome	53:86d24b9480b9	160	IBEAM, ///< \| cursor
WiredHome	53:86d24b9480b9	161	UNDER, ///< _ cursor
WiredHome	53:86d24b9480b9	162	BLOCK ///< Block cursor
WiredHome	53:86d24b9480b9	163	} cursor_t;
WiredHome	53:86d24b9480b9	164
WiredHome	19:3f82c1161fd2	165	/// font type selection.
WiredHome	19:3f82c1161fd2	166	typedef enum
WiredHome	19:3f82c1161fd2	167	{
WiredHome	31:c72e12cd5c67	168	ISO8859_1, ///< ISO8859-1 font
WiredHome	31:c72e12cd5c67	169	ISO8859_2, ///< ISO8859-2 font
WiredHome	31:c72e12cd5c67	170	ISO8859_3, ///< ISO8859-3 font
WiredHome	31:c72e12cd5c67	171	ISO8859_4 ///< ISO8859-4 font
WiredHome	19:3f82c1161fd2	172	} font_t;
WiredHome	19:3f82c1161fd2	173
WiredHome	84:e102021864b5	174	/// display orientation
WiredHome	19:3f82c1161fd2	175	typedef enum
WiredHome	19:3f82c1161fd2	176	{
WiredHome	84:e102021864b5	177	normal, ///< normal (landscape) orientation
WiredHome	84:e102021864b5	178	rotate_0 = normal, ///< alternate to 'normal'
WiredHome	84:e102021864b5	179	rotate_90, ///< rotated clockwise 90 degree
WiredHome	84:e102021864b5	180	rotate_180, ///< rotated (clockwise) 180 degree
WiredHome	84:e102021864b5	181	rotate_270, ///< rotated clockwise 270 degree
WiredHome	84:e102021864b5	182	} orientation_t;
WiredHome	19:3f82c1161fd2	183
WiredHome	19:3f82c1161fd2	184	/// alignment
WiredHome	19:3f82c1161fd2	185	typedef enum
WiredHome	19:3f82c1161fd2	186	{
WiredHome	31:c72e12cd5c67	187	align_none, ///< align - none
WiredHome	31:c72e12cd5c67	188	align_full ///< align - full
WiredHome	19:3f82c1161fd2	189	} alignment_t;
WiredHome	19:3f82c1161fd2	190
WiredHome	19:3f82c1161fd2	191	/// Scale factor - 1, 2, 3 4
WiredHome	40:04aa280dfa39	192	typedef int HorizontalScale;
WiredHome	19:3f82c1161fd2	193
WiredHome	19:3f82c1161fd2	194	/// Scale factor - 1, 2, 3, 4
WiredHome	40:04aa280dfa39	195	typedef int VerticalScale;
WiredHome	19:3f82c1161fd2	196
WiredHome	19:3f82c1161fd2	197	/// Clear screen region
WiredHome	19:3f82c1161fd2	198	typedef enum
WiredHome	19:3f82c1161fd2	199	{
WiredHome	31:c72e12cd5c67	200	FULLWINDOW, ///< Full screen
WiredHome	31:c72e12cd5c67	201	ACTIVEWINDOW ///< active window/region
WiredHome	19:3f82c1161fd2	202	} Region_t;
WiredHome	19:3f82c1161fd2	203
WiredHome	61:8f3153bf0baa	204	/// Set the Layer Display Mode. @ref SetLayerMode
WiredHome	53:86d24b9480b9	205	typedef enum
WiredHome	53:86d24b9480b9	206	{
WiredHome	61:8f3153bf0baa	207	ShowLayer0, ///< Only layer 0 is visible, layer 1 is hidden (default)
WiredHome	56:7a85d226ad0d	208	ShowLayer1, ///< Only layer 1 is visible, layer 0 is hidden
WiredHome	53:86d24b9480b9	209	LightenOverlay, ///< Lighten-overlay mode
WiredHome	53:86d24b9480b9	210	TransparentMode, ///< Transparent mode
WiredHome	53:86d24b9480b9	211	BooleanOR, ///< Boolean OR mode
WiredHome	53:86d24b9480b9	212	BooleanAND, ///< Boolean AND mode
WiredHome	53:86d24b9480b9	213	FloatingWindow ///< Floating Window mode
WiredHome	53:86d24b9480b9	214	} LayerMode_T;
WiredHome	53:86d24b9480b9	215
hexley	54:e117ad10fba6	216	/// Touch Panel modes
hexley	54:e117ad10fba6	217	typedef enum
hexley	54:e117ad10fba6	218	{
hexley	54:e117ad10fba6	219	TP_Auto, ///< Auto touch detection mode
hexley	54:e117ad10fba6	220	TP_Manual, ///< Manual touch detection mode
hexley	54:e117ad10fba6	221	} tpmode_t;
hexley	54:e117ad10fba6	222
WiredHome	19:3f82c1161fd2	223	/// Constructor for a display based on the RAiO RA8875
WiredHome	19:3f82c1161fd2	224	/// display controller.
WiredHome	19:3f82c1161fd2	225	///
WiredHome	61:8f3153bf0baa	226	/// This configures the registers and calls the @ref init method.
WiredHome	61:8f3153bf0baa	227	///
WiredHome	56:7a85d226ad0d	228	/// @code
WiredHome	56:7a85d226ad0d	229	/// #include "RA8875.h"
WiredHome	56:7a85d226ad0d	230	/// RA8875 lcd(p5, p6, p7, p12, NC, "tft");
WiredHome	56:7a85d226ad0d	231	///
WiredHome	56:7a85d226ad0d	232	/// int main()
WiredHome	56:7a85d226ad0d	233	/// {
WiredHome	81:01da2e34283d	234	/// lcd.init();
WiredHome	56:7a85d226ad0d	235	/// lcd.printf("printing 3 x 2 = %d", 3*2);
WiredHome	56:7a85d226ad0d	236	/// lcd.circle(400,25, 25, BrightRed);
WiredHome	56:7a85d226ad0d	237	/// }
WiredHome	56:7a85d226ad0d	238	/// @endcode
WiredHome	56:7a85d226ad0d	239	///
WiredHome	72:ecffe56af969	240	/// @param[in] mosi is the SPI master out slave in pin on the mbed.
WiredHome	72:ecffe56af969	241	/// @param[in] miso is the SPI master in slave out pin on the mbed.
WiredHome	72:ecffe56af969	242	/// @param[in] sclk is the SPI shift clock pin on the mbed.
WiredHome	72:ecffe56af969	243	/// @param[in] csel is the DigitalOut pin on the mbed to use as the
WiredHome	19:3f82c1161fd2	244	/// active low chip select for the display controller.
WiredHome	72:ecffe56af969	245	/// @param[in] reset is the DigitalOut pin on the mbed to use as the
WiredHome	19:3f82c1161fd2	246	/// active low reset input on the display controller -
WiredHome	19:3f82c1161fd2	247	/// but this is not currently used.
WiredHome	72:ecffe56af969	248	/// @param[in] name is a text name for this object, which will permit
WiredHome	72:ecffe56af969	249	/// capturing stdout to puts() and printf() directly to it.
WiredHome	19:3f82c1161fd2	250	///
WiredHome	19:3f82c1161fd2	251	RA8875(PinName mosi, PinName miso, PinName sclk, PinName csel, PinName reset, const char * name = "lcd");
WiredHome	19:3f82c1161fd2	252
WiredHome	45:679c2fb8480c	253	// Destructor doesn't have much to do as this would typically be created
WiredHome	45:679c2fb8480c	254	// at startup, and not at runtime.
WiredHome	19:3f82c1161fd2	255	//~RA8875();
WiredHome	19:3f82c1161fd2	256
WiredHome	79:544eb4964795	257	/// Initialize the driver.
WiredHome	79:544eb4964795	258	///
WiredHome	81:01da2e34283d	259	/// @param[in] width in pixels to configure the display for. This parameter is optional
WiredHome	81:01da2e34283d	260	/// and the default is 480.
WiredHome	81:01da2e34283d	261	/// @param[in] height in pixels to configure the display for. This parameter is optional
WiredHome	81:01da2e34283d	262	/// and the default is 272.
WiredHome	81:01da2e34283d	263	/// @param[in] color_bpp can be either 8 or 16, but must be consistent
WiredHome	81:01da2e34283d	264	/// with the width and height parameters. This parameter is optional
WiredHome	81:01da2e34283d	265	/// and the default is 16.
WiredHome	79:544eb4964795	266	/// @param[in] power defines if the display should be left in the power-on or off state.
WiredHome	81:01da2e34283d	267	/// If power is true (on), the backlight is set to 100%. This parameter is optional
WiredHome	81:01da2e34283d	268	/// and the default is true (on). @see Power.
WiredHome	81:01da2e34283d	269	/// @param[in] keypadon defines if the keypad support should be enabled. This parameter is optional
WiredHome	81:01da2e34283d	270	/// and the default is true (enabled). @see KeypadInit.
WiredHome	81:01da2e34283d	271	/// @param[in] touchscreeenon defines if the keypad support should be enabled. This parameter is optional
WiredHome	81:01da2e34283d	272	/// and the default is true (enabled). @see TouchPanelInit.
WiredHome	79:544eb4964795	273	/// @returns success/failure code. @see RetCode_t.
WiredHome	79:544eb4964795	274	///
WiredHome	81:01da2e34283d	275	RetCode_t init(int width = 480, int height = 272, int color_bpp = 16,
WiredHome	81:01da2e34283d	276	bool poweron = true, bool keypadon = true, bool touchscreeenon = true);
WiredHome	79:544eb4964795	277
WiredHome	79:544eb4964795	278	/// Get a pointer to the error code.
WiredHome	79:544eb4964795	279	///
WiredHome	79:544eb4964795	280	/// This method returns a pointer to a text string that matches the
WiredHome	79:544eb4964795	281	/// code. @see RetCode_t.
WiredHome	79:544eb4964795	282	///
WiredHome	79:544eb4964795	283	/// @param[in] code is the return value from RetCode_t to look up.
WiredHome	79:544eb4964795	284	/// @returns a pointer to the text message representing code. If code
WiredHome	79:544eb4964795	285	/// is not a valid value, then it returns the text for bad_parameter;
WiredHome	79:544eb4964795	286	const char * GetErrorMessage(RetCode_t code);
WiredHome	79:544eb4964795	287
WiredHome	79:544eb4964795	288
WiredHome	50:2c4f474a2453	289	/// Select the drawing layer for subsequent commands.
WiredHome	43:3becae133285	290	///
WiredHome	43:3becae133285	291	/// If the screen configuration is 480 x 272, or if it is 800 x 480
WiredHome	43:3becae133285	292	/// and 8-bit color, the the display supports two layers, which can
WiredHome	43:3becae133285	293	/// be independently drawn on and shown. Additionally, complex
WiredHome	43:3becae133285	294	/// operations involving both layers are permitted.
WiredHome	43:3becae133285	295	///
WiredHome	56:7a85d226ad0d	296	/// @code
WiredHome	56:7a85d226ad0d	297	/// //lcd.SetLayerMode(OnlyLayer0); // default is layer 0
WiredHome	56:7a85d226ad0d	298	/// lcd.rect(400,130, 475,155,Brown);
WiredHome	56:7a85d226ad0d	299	/// lcd.SelectDrawingLayer(1);
WiredHome	56:7a85d226ad0d	300	/// lcd.circle(400,25, 25, BrightRed);
WiredHome	56:7a85d226ad0d	301	/// wait(1);
WiredHome	56:7a85d226ad0d	302	/// lcd.SetLayerMode(ShowLayer1);
WiredHome	56:7a85d226ad0d	303	/// @endcode
WiredHome	56:7a85d226ad0d	304	///
WiredHome	61:8f3153bf0baa	305	/// @attention The user manual refers to Layer 1 and Layer 2, however the
WiredHome	61:8f3153bf0baa	306	/// actual register values are value 0 and 1. This API as well as
WiredHome	61:8f3153bf0baa	307	/// others that reference the layers use the values 0 and 1 for
WiredHome	61:8f3153bf0baa	308	/// cleaner iteration in the code.
WiredHome	43:3becae133285	309	///
WiredHome	72:ecffe56af969	310	/// @param[in] layer is 0 or 1 to select the layer for subsequent
WiredHome	61:8f3153bf0baa	311	/// commands.
WiredHome	43:3becae133285	312	/// @returns success/failure code. @see RetCode_t.
WiredHome	43:3becae133285	313	///
WiredHome	50:2c4f474a2453	314	RetCode_t SelectDrawingLayer(uint16_t layer);
WiredHome	43:3becae133285	315
WiredHome	61:8f3153bf0baa	316	/// Get the currently active drawing layer.
WiredHome	61:8f3153bf0baa	317	///
WiredHome	61:8f3153bf0baa	318	/// This returns a value, 0 or 1, based on the screen configuration
WiredHome	61:8f3153bf0baa	319	/// and the currently active drawing layer.
WiredHome	61:8f3153bf0baa	320	///
WiredHome	61:8f3153bf0baa	321	/// @code
WiredHome	61:8f3153bf0baa	322	/// uint16_t prevLayer = lcd.GetDrawingLayer();
WiredHome	61:8f3153bf0baa	323	/// lcd.SelectDrawingLayer(x);
WiredHome	61:8f3153bf0baa	324	/// lcd.circle(400,25, 25, BrightRed);
WiredHome	61:8f3153bf0baa	325	/// lcd.SelectDrawingLayer(prevLayer);
WiredHome	61:8f3153bf0baa	326	/// @endcode
WiredHome	61:8f3153bf0baa	327	///
WiredHome	61:8f3153bf0baa	328	/// @attention The user manual refers to Layer 1 and Layer 2, however the
WiredHome	61:8f3153bf0baa	329	/// actual register values are value 0 and 1. This API as well as
WiredHome	61:8f3153bf0baa	330	/// others that reference the layers use the values 0 and 1 for
WiredHome	61:8f3153bf0baa	331	/// cleaner iteration in the code.
WiredHome	61:8f3153bf0baa	332	///
WiredHome	61:8f3153bf0baa	333	/// @returns the current drawing layer; 0 or 1.
WiredHome	61:8f3153bf0baa	334	///
WiredHome	61:8f3153bf0baa	335	uint16_t GetDrawingLayer(void);
WiredHome	61:8f3153bf0baa	336
WiredHome	44:207594dece70	337	/// Set the Layer presentation mode.
WiredHome	44:207594dece70	338	///
WiredHome	44:207594dece70	339	/// This sets the presentation mode for layers, and permits showing
WiredHome	44:207594dece70	340	/// a single layer, or applying a mode where the two layers
WiredHome	44:207594dece70	341	/// are combined using one of the hardware methods.
WiredHome	44:207594dece70	342	///
WiredHome	61:8f3153bf0baa	343	/// Refer to the RA8875 data sheet for full details.
WiredHome	61:8f3153bf0baa	344	///
WiredHome	56:7a85d226ad0d	345	/// @code
WiredHome	56:7a85d226ad0d	346	/// //lcd.SetLayerMode(OnlyLayer0); // default is layer 0
WiredHome	56:7a85d226ad0d	347	/// lcd.rect(400,130, 475,155,Brown);
WiredHome	56:7a85d226ad0d	348	/// lcd.SelectDrawingLayer(1);
WiredHome	56:7a85d226ad0d	349	/// lcd.circle(400,25, 25, BrightRed);
WiredHome	56:7a85d226ad0d	350	/// wait(1);
WiredHome	56:7a85d226ad0d	351	/// lcd.SetLayerMode(ShowLayer1);
WiredHome	56:7a85d226ad0d	352	/// @endcode
WiredHome	56:7a85d226ad0d	353	///
WiredHome	72:ecffe56af969	354	/// @param[in] mode sets the mode in the Layer Transparency Register.
WiredHome	44:207594dece70	355	/// @returns success/failure code. @see RetCode_t.
WiredHome	44:207594dece70	356	///
WiredHome	53:86d24b9480b9	357	RetCode_t SetLayerMode(LayerMode_T mode);
WiredHome	44:207594dece70	358
WiredHome	82:f7d300f26540	359	/// Get the Layer presentation mode.
WiredHome	82:f7d300f26540	360	///
WiredHome	82:f7d300f26540	361	/// This gets the current layer mode. @see LayerMode_T.
WiredHome	82:f7d300f26540	362	///
WiredHome	82:f7d300f26540	363	/// @returns layer mode.
WiredHome	82:f7d300f26540	364	///
WiredHome	82:f7d300f26540	365	LayerMode_T GetLayerMode(void);
WiredHome	82:f7d300f26540	366
WiredHome	44:207594dece70	367	/// Set the layer transparency for each layer.
WiredHome	44:207594dece70	368	///
WiredHome	44:207594dece70	369	/// Set the transparency, where the range of values is
WiredHome	44:207594dece70	370	/// from zero (fully visible) to eight (fully transparent).
WiredHome	44:207594dece70	371	/// The input value is automatically limited to this range.
WiredHome	44:207594dece70	372	///
WiredHome	56:7a85d226ad0d	373	/// @code
WiredHome	56:7a85d226ad0d	374	/// // draw something on each layer, then step-fade across
WiredHome	56:7a85d226ad0d	375	/// display.SetLayerMode(RA8875::TransparentMode);
WiredHome	56:7a85d226ad0d	376	/// for (i=0; i<=8; i++) {
WiredHome	56:7a85d226ad0d	377	/// display.SetLayerTransparency(i, 8-i);
WiredHome	56:7a85d226ad0d	378	/// wait_ms(200);
WiredHome	56:7a85d226ad0d	379	/// }
WiredHome	56:7a85d226ad0d	380	/// @endcode
WiredHome	56:7a85d226ad0d	381	///
WiredHome	72:ecffe56af969	382	/// @param[in] layer1 sets the layer 1 transparency.
WiredHome	72:ecffe56af969	383	/// @param[in] layer2 sets the layer 2 transparency.
WiredHome	44:207594dece70	384	/// @returns success/failure code. @see RetCode_t.
WiredHome	44:207594dece70	385	///
WiredHome	44:207594dece70	386	RetCode_t SetLayerTransparency(uint8_t layer1, uint8_t layer2);
WiredHome	44:207594dece70	387
WiredHome	53:86d24b9480b9	388	/// Set the background color register used for transparency.
WiredHome	53:86d24b9480b9	389	///
WiredHome	53:86d24b9480b9	390	/// This command sets the background color registers that are used
WiredHome	53:86d24b9480b9	391	/// in the transparent color operations involving the layers.
WiredHome	53:86d24b9480b9	392	///
WiredHome	72:ecffe56af969	393	/// @param[in] color is optional and expressed in 16-bit format. If not
WiredHome	53:86d24b9480b9	394	/// supplied, a default of Black is used.
WiredHome	53:86d24b9480b9	395	/// @returns success/failure code. @see RetCode_t.
WiredHome	53:86d24b9480b9	396	///
WiredHome	53:86d24b9480b9	397	RetCode_t SetBackgroundTransparencyColor(color_t color = RGB(0,0,0));
hexley	54:e117ad10fba6	398
WiredHome	73:f22a18707b5e	399
WiredHome	73:f22a18707b5e	400	/// Get the background color value used for transparency.
WiredHome	73:f22a18707b5e	401	///
WiredHome	73:f22a18707b5e	402	/// This command reads the background color registers that define
WiredHome	73:f22a18707b5e	403	/// the transparency color for operations involving layers.
WiredHome	73:f22a18707b5e	404	///
WiredHome	73:f22a18707b5e	405	/// @returns the color.
WiredHome	73:f22a18707b5e	406	///
WiredHome	73:f22a18707b5e	407	color_t GetBackgroundTransparencyColor(void);
WiredHome	73:f22a18707b5e	408
hexley	54:e117ad10fba6	409	/// Initialize theTouch Panel controller with default values
hexley	54:e117ad10fba6	410	///
WiredHome	78:faf49c381591	411	/// This activates the simplified touch panel init, which may work for
WiredHome	78:faf49c381591	412	/// most uses. The alternate API is available if fine-grained control
WiredHome	78:faf49c381591	413	/// is needed for the numerous settings.
WiredHome	78:faf49c381591	414	///
WiredHome	56:7a85d226ad0d	415	/// @returns success/failure code. @see RetCode_t.
WiredHome	56:7a85d226ad0d	416	///
hexley	54:e117ad10fba6	417	RetCode_t TouchPanelInit(void);
hexley	54:e117ad10fba6	418
hexley	54:e117ad10fba6	419	/// Initialize the Touch Panel controller with detailed settings.
hexley	54:e117ad10fba6	420	///
WiredHome	78:faf49c381591	421	/// This is the detailed touch panel init, which provides the ability
WiredHome	78:faf49c381591	422	/// to set nearly every possible option.
WiredHome	78:faf49c381591	423	///
hexley	54:e117ad10fba6	424	/// @param[in] bTpEnable Touch Panel enable/disable control:
hexley	54:e117ad10fba6	425	/// - TP_ENABLE: enable the touch panel
hexley	54:e117ad10fba6	426	/// - TP_DISABLE: disable the touch panel
WiredHome	56:7a85d226ad0d	427	/// @param[in] bTpAutoManual Touch Panel operating mode:
hexley	54:e117ad10fba6	428	/// - TP_MODE_AUTO: automatic capture
hexley	54:e117ad10fba6	429	/// - TP_MODE_MANUAL: manual capture
WiredHome	56:7a85d226ad0d	430	/// @param[in] bTpDebounce Debounce circuit enable for touch panel interrupt:
hexley	54:e117ad10fba6	431	/// - TP_DEBOUNCE_OFF: disable the debounce circuit
hexley	54:e117ad10fba6	432	/// - TP_DEBOUNCE_ON: enable the debounce circuit
WiredHome	56:7a85d226ad0d	433	/// @param[in] bTpManualMode When Manual Mode is selected, this sets the mode:
hexley	54:e117ad10fba6	434	/// - TP_MANUAL_IDLE: touch panel is idle
hexley	54:e117ad10fba6	435	/// - TP_MANUAL_WAIT: wait for touch panel event
hexley	54:e117ad10fba6	436	/// - TP_MANUAL_LATCH_X: latch X data
hexley	54:e117ad10fba6	437	/// - TP_MANUAL_LATCH_Y: latch Y data
WiredHome	56:7a85d226ad0d	438	/// @param[in] bTpAdcClkDiv Sets the ADC clock as a fraction of the System CLK:
hexley	54:e117ad10fba6	439	/// - TP_ADC_CLKDIV_1: Use CLK
hexley	54:e117ad10fba6	440	/// - TP_ADC_CLKDIV_2: Use CLK/2
hexley	54:e117ad10fba6	441	/// - TP_ADC_CLKDIV_4: Use CLK/4
hexley	54:e117ad10fba6	442	/// - TP_ADC_CLKDIV_8: Use CLK/8
hexley	54:e117ad10fba6	443	/// - TP_ADC_CLKDIV_16: Use CLK/16
hexley	54:e117ad10fba6	444	/// - TP_ADC_CLKDIV_32: Use CLK/32
hexley	54:e117ad10fba6	445	/// - TP_ADC_CLKDIV_64: Use CLK/64
hexley	54:e117ad10fba6	446	/// - TP_ADC_CLKDIV_128: Use CLK/128
WiredHome	56:7a85d226ad0d	447	/// @param[in] bTpAdcSampleTime Touch Panel sample time delay before ADC data is ready:
hexley	54:e117ad10fba6	448	/// - TP_ADC_SAMPLE_512_CLKS: Wait 512 system clocks
hexley	54:e117ad10fba6	449	/// - TP_ADC_SAMPLE_1024_CLKS: Wait 1024 system clocks
hexley	54:e117ad10fba6	450	/// - TP_ADC_SAMPLE_2048_CLKS: Wait 2048 system clocks
hexley	54:e117ad10fba6	451	/// - TP_ADC_SAMPLE_4096_CLKS: Wait 4096 system clocks
hexley	54:e117ad10fba6	452	/// - TP_ADC_SAMPLE_8192_CLKS: Wait 8192 system clocks
hexley	54:e117ad10fba6	453	/// - TP_ADC_SAMPLE_16384_CLKS: Wait 16384 system clocks
hexley	54:e117ad10fba6	454	/// - TP_ADC_SAMPLE_32768_CLKS: Wait 32768 system clocks
hexley	54:e117ad10fba6	455	/// - TP_ADC_SAMPLE_65536_CLKS: Wait 65536 system clocks
WiredHome	56:7a85d226ad0d	456	/// @returns success/failure code. @see RetCode_t.
WiredHome	56:7a85d226ad0d	457	///
WiredHome	78:faf49c381591	458	RetCode_t TouchPanelInit(uint8_t bTpEnable, uint8_t bTpAutoManual, uint8_t bTpDebounce,
WiredHome	78:faf49c381591	459	uint8_t bTpManualMode, uint8_t bTpAdcClkDiv, uint8_t bTpAdcSampleTime);
WiredHome	53:86d24b9480b9	460
WiredHome	79:544eb4964795	461	/// Poll the TouchPanel and on a touch event return the a to d filtered x, y coordinates.
hexley	54:e117ad10fba6	462	///
WiredHome	78:faf49c381591	463	/// This method reads the touch controller, which has a 10-bit range for each the
WiredHome	79:544eb4964795	464	/// x and the y axis.
WiredHome	79:544eb4964795	465	///
WiredHome	79:544eb4964795	466	/// @note The returned values are not in display (pixel) units but are in analog to
WiredHome	79:544eb4964795	467	/// digital converter units.
WiredHome	78:faf49c381591	468	///
WiredHome	81:01da2e34283d	469	/// @note This API is usually not needed. @see TouchPanelComputeCalibration.
WiredHome	79:544eb4964795	470	/// @see TouchPanelReadable.
WiredHome	78:faf49c381591	471	///
WiredHome	79:544eb4964795	472	/// @param[out] x is the x scale a/d value.
WiredHome	79:544eb4964795	473	/// @param[out] y is the y scale a/d value.
WiredHome	83:7bad0068cca0	474	/// @returns a value indicating the state of the touch,
WiredHome	83:7bad0068cca0	475	/// - no_cal: no calibration matrix is available, touch coordinates are not returned.
WiredHome	83:7bad0068cca0	476	/// - no_touch: no touch is detected, touch coordinates are not returned.
WiredHome	83:7bad0068cca0	477	/// - touch: touch is detected, touch coordinates are returned.
WiredHome	83:7bad0068cca0	478	/// - held: held after touch, touch coordinates are returned.
WiredHome	83:7bad0068cca0	479	/// - release: indicates a release, touch coordinates are returned.
WiredHome	56:7a85d226ad0d	480	///
WiredHome	83:7bad0068cca0	481	TouchCode_t TouchPanelA2DFiltered(int x, int y);
hexley	54:e117ad10fba6	482
WiredHome	79:544eb4964795	483	/// Poll the TouchPanel and on a touch event return the a to d raw x, y coordinates.
hexley	54:e117ad10fba6	484	///
WiredHome	78:faf49c381591	485	/// This method reads the touch controller, which has a 10-bit range for each the
WiredHome	78:faf49c381591	486	/// x and the y axis. A number of samples of the raw data are taken, filtered,
WiredHome	79:544eb4964795	487	/// and the results are returned.
WiredHome	78:faf49c381591	488	///
WiredHome	79:544eb4964795	489	/// @note The returned values are not in display (pixel) units but are in analog to
WiredHome	79:544eb4964795	490	/// digital converter units.
WiredHome	79:544eb4964795	491	///
WiredHome	81:01da2e34283d	492	/// @note This API is usually not needed. @see TouchPanelComputeCalibration.
WiredHome	79:544eb4964795	493	/// @see TouchPanelReadable.
WiredHome	78:faf49c381591	494	///
WiredHome	79:544eb4964795	495	/// @param[out] x is the x scale a/d value.
WiredHome	79:544eb4964795	496	/// @param[out] y is the y scale a/d value.
WiredHome	83:7bad0068cca0	497	/// @returns a value indicating the state of the touch,
WiredHome	83:7bad0068cca0	498	/// - no_cal: no calibration matrix is available, touch coordinates are not returned.
WiredHome	83:7bad0068cca0	499	/// - no_touch: no touch is detected, touch coordinates are not returned.
WiredHome	83:7bad0068cca0	500	/// - touch: touch is detected, touch coordinates are returned.
WiredHome	83:7bad0068cca0	501	/// - held: held after touch, touch coordinates are returned.
WiredHome	83:7bad0068cca0	502	/// - release: indicates a release, touch coordinates are returned.
WiredHome	83:7bad0068cca0	503	///
WiredHome	83:7bad0068cca0	504	TouchCode_t TouchPanelA2DRaw(int x, int y);
WiredHome	83:7bad0068cca0	505
WiredHome	83:7bad0068cca0	506	/// Get the screen calibrated point of touch.
WiredHome	83:7bad0068cca0	507	///
WiredHome	83:7bad0068cca0	508	/// This method determines if there is a touch and if so it will provide
WiredHome	83:7bad0068cca0	509	/// the screen-relative touch coordinates. This method can be used in
WiredHome	83:7bad0068cca0	510	/// a manner similar to Serial.readable(), to determine if there was a
WiredHome	83:7bad0068cca0	511	/// touch and indicate that - but not care about the coordinates. Alternately,
WiredHome	83:7bad0068cca0	512	/// if a valid pointer to a point_t is provided, then if a touch is detected
WiredHome	83:7bad0068cca0	513	/// the point_t will be populated with data.
WiredHome	56:7a85d226ad0d	514	///
WiredHome	83:7bad0068cca0	515	/// @code
WiredHome	83:7bad0068cca0	516	/// Timer t;
WiredHome	83:7bad0068cca0	517	/// t.start();
WiredHome	83:7bad0068cca0	518	/// do {
WiredHome	83:7bad0068cca0	519	/// point_t point = {0, 0};
WiredHome	83:7bad0068cca0	520	/// if (display.TouchPanelReadable(&point)) {
WiredHome	85:022bba13c5c4	521	/// display.pixel(point, Red);
WiredHome	83:7bad0068cca0	522	/// }
WiredHome	83:7bad0068cca0	523	/// } while (t.read_ms() < 30000);
WiredHome	83:7bad0068cca0	524	/// @endcode
WiredHome	83:7bad0068cca0	525	///
WiredHome	85:022bba13c5c4	526	/// @param[out] TouchPoint is the touch point, if a touch is registered.
WiredHome	83:7bad0068cca0	527	/// @returns a value indicating the state of the touch,
WiredHome	83:7bad0068cca0	528	/// - no_cal: no calibration matrix is available, touch coordinates are not returned.
WiredHome	83:7bad0068cca0	529	/// - no_touch: no touch is detected, touch coordinates are not returned.
WiredHome	83:7bad0068cca0	530	/// - touch: touch is detected, touch coordinates are returned.
WiredHome	83:7bad0068cca0	531	/// - held: held after touch, touch coordinates are returned.
WiredHome	83:7bad0068cca0	532	/// - release: indicates a release, touch coordinates are returned.
WiredHome	83:7bad0068cca0	533	///
WiredHome	85:022bba13c5c4	534	TouchCode_t TouchPanelReadable(point_t * TouchPoint = NULL);
WiredHome	85:022bba13c5c4	535
WiredHome	85:022bba13c5c4	536
WiredHome	85:022bba13c5c4	537	/// Wait for a touch panel touch and return it.
WiredHome	85:022bba13c5c4	538	///
WiredHome	85:022bba13c5c4	539	/// This method is similar to Serial.getc() in that it will wait for a touch
WiredHome	85:022bba13c5c4	540	/// and then return. In order to extract the coordinates of the touch, a
WiredHome	85:022bba13c5c4	541	/// valid pointer to a point_t must be provided.
WiredHome	85:022bba13c5c4	542	///
WiredHome	85:022bba13c5c4	543	/// @note There is no timeout on this function, so its use is not recommended.
WiredHome	85:022bba13c5c4	544	///
WiredHome	85:022bba13c5c4	545	/// @code
WiredHome	85:022bba13c5c4	546	/// Timer t;
WiredHome	85:022bba13c5c4	547	/// t.start();
WiredHome	85:022bba13c5c4	548	/// do {
WiredHome	85:022bba13c5c4	549	/// point_t point = {0, 0};
WiredHome	85:022bba13c5c4	550	/// display.TouchPanelGet(&point); // hangs here until touch
WiredHome	85:022bba13c5c4	551	/// display.pixel(point, Red);
WiredHome	85:022bba13c5c4	552	/// } while (t.read_ms() < 30000);
WiredHome	85:022bba13c5c4	553	/// @endcode
WiredHome	85:022bba13c5c4	554	///
WiredHome	85:022bba13c5c4	555	/// @param[out] TouchPoint is the touch point, if a touch is registered.
WiredHome	85:022bba13c5c4	556	/// @returns a value indicating the state of the touch,
WiredHome	85:022bba13c5c4	557	/// - no_cal: no calibration matrix is available, touch coordinates are not returned.
WiredHome	85:022bba13c5c4	558	/// - no_touch: no touch is detected, touch coordinates are not returned.
WiredHome	85:022bba13c5c4	559	/// - touch: touch is detected, touch coordinates are returned.
WiredHome	85:022bba13c5c4	560	/// - held: held after touch, touch coordinates are returned.
WiredHome	85:022bba13c5c4	561	/// - release: indicates a release, touch coordinates are returned.
WiredHome	85:022bba13c5c4	562	///
WiredHome	85:022bba13c5c4	563	TouchCode_t TouchPanelGet(point_t * TouchPoint);
WiredHome	85:022bba13c5c4	564
WiredHome	83:7bad0068cca0	565
WiredHome	77:9206c13aa527	566	/// Calibrate the touch panel.
WiredHome	77:9206c13aa527	567	///
WiredHome	77:9206c13aa527	568	/// This method accepts two lists - one list is target points in ,
WiredHome	77:9206c13aa527	569	/// display coordinates and the other is a lit of raw touch coordinate
WiredHome	77:9206c13aa527	570	/// values. It generates a calibration matrix for later use. This
WiredHome	77:9206c13aa527	571	/// matrix is also accessible to the calling API, which may store
WiredHome	77:9206c13aa527	572	/// the matrix in persistent memory and then install the calibration
WiredHome	77:9206c13aa527	573	/// matrix on the next power cycle. By doing so, it can avoid the
WiredHome	77:9206c13aa527	574	/// need to calibrate on every power cycle.
WiredHome	77:9206c13aa527	575	///
WiredHome	81:01da2e34283d	576	/// @note The methods "TouchPanelComputeCalibration", "TouchPanelReadable", and
WiredHome	77:9206c13aa527	577	/// indirectly the "TouchPanelSetMatrix" methods are all derived
WiredHome	77:9206c13aa527	578	/// from a program by Carlos E. Vidales. See the copyright note
WiredHome	77:9206c13aa527	579	/// for further details. See also the article
WiredHome	77:9206c13aa527	580	/// http://www.embedded.com/design/system-integration/4023968/How-To-Calibrate-Touch-Screens
WiredHome	77:9206c13aa527	581	///
WiredHome	77:9206c13aa527	582	/// @copyright Copyright (c) 2001, Carlos E. Vidales. All rights reserved.
WiredHome	78:faf49c381591	583	/// This sample program was written and put in the public domain
WiredHome	78:faf49c381591	584	/// by Carlos E. Vidales. The program is provided "as is"
WiredHome	78:faf49c381591	585	/// without warranty of any kind, either expressed or implied.
WiredHome	78:faf49c381591	586	/// If you choose to use the program within your own products
WiredHome	78:faf49c381591	587	/// you do so at your own risk, and assume the responsibility
WiredHome	78:faf49c381591	588	/// for servicing, repairing or correcting the program should
WiredHome	78:faf49c381591	589	/// it prove defective in any manner.
WiredHome	78:faf49c381591	590	/// You may copy and distribute the program's source code in any
WiredHome	78:faf49c381591	591	/// medium, provided that you also include in each copy an
WiredHome	78:faf49c381591	592	/// appropriate copyright notice and disclaimer of warranty.
WiredHome	78:faf49c381591	593	/// You may also modify this program and distribute copies of
WiredHome	78:faf49c381591	594	/// it provided that you include prominent notices stating
WiredHome	78:faf49c381591	595	/// that you changed the file(s) and the date of any change,
WiredHome	78:faf49c381591	596	/// and that you do not charge any royalties or licenses for
WiredHome	78:faf49c381591	597	/// its use.
WiredHome	77:9206c13aa527	598	///
WiredHome	77:9206c13aa527	599	/// @param[in] display is a pointer to a set of 3 points, which
WiredHome	77:9206c13aa527	600	/// are in display units of measure. These are the targets
WiredHome	77:9206c13aa527	601	/// the calibration was aiming for.
WiredHome	77:9206c13aa527	602	/// @param[in] screen is a pointer to a set of 3 points, which
WiredHome	77:9206c13aa527	603	/// are in touchscreen units of measure. These are the
WiredHome	77:9206c13aa527	604	/// registered touches.
WiredHome	77:9206c13aa527	605	/// @param[out] matrix is an optional parameter to hold the calibration matrix
WiredHome	77:9206c13aa527	606	/// as a result of the calibration. This can be saved in
WiredHome	77:9206c13aa527	607	/// non-volatile memory to recover the calibration after a power fail.
WiredHome	77:9206c13aa527	608	/// @returns success/failure code. @see RetCode_t.
WiredHome	77:9206c13aa527	609	///
WiredHome	81:01da2e34283d	610	RetCode_t TouchPanelComputeCalibration(point_t display[3], point_t screen[3], tpMatrix_t * matrix);
WiredHome	81:01da2e34283d	611
WiredHome	81:01da2e34283d	612
WiredHome	81:01da2e34283d	613	/// Perform the touch panel calibration process.
WiredHome	81:01da2e34283d	614	///
WiredHome	81:01da2e34283d	615	/// This method provides the easy "shortcut" to calibrating the touch panel.
WiredHome	81:01da2e34283d	616	/// The process will automatically generate the calibration points, present
WiredHome	81:01da2e34283d	617	/// the targets on-screen, detect the touches, compute the calibration
WiredHome	81:01da2e34283d	618	/// matrix, and optionally provide the calibration matrix to the calling code
WiredHome	81:01da2e34283d	619	/// for persistence in non-volatile memory.
WiredHome	81:01da2e34283d	620	///
WiredHome	81:01da2e34283d	621	/// @param[out] matrix is an optional parameter to hold the calibration matrix
WiredHome	81:01da2e34283d	622	/// as a result of the calibration. This can be saved in
WiredHome	81:01da2e34283d	623	/// non-volatile memory to recover the calibration after a power fail.
WiredHome	81:01da2e34283d	624	/// @returns success/failure code. @see RetCode_t.
WiredHome	81:01da2e34283d	625	///
WiredHome	85:022bba13c5c4	626	RetCode_t TouchPanelCalibrate(tpMatrix_t * matrix = NULL);
WiredHome	81:01da2e34283d	627
WiredHome	81:01da2e34283d	628	/// Perform the touch panel calibration process.
WiredHome	81:01da2e34283d	629	///
WiredHome	81:01da2e34283d	630	/// This method provides the easy "shortcut" to calibrating the touch panel.
WiredHome	81:01da2e34283d	631	/// The process will automatically generate the calibration points, present
WiredHome	81:01da2e34283d	632	/// the targets on-screen, detect the touches, compute the calibration
WiredHome	81:01da2e34283d	633	/// matrix, and optionally provide the calibration matrix to the calling code
WiredHome	81:01da2e34283d	634	/// for persistence in non-volatile memory.
WiredHome	81:01da2e34283d	635	///
WiredHome	81:01da2e34283d	636	/// @param[in] msg is a text message to present on the screen during the
WiredHome	81:01da2e34283d	637	/// calibration process.
WiredHome	81:01da2e34283d	638	/// @param[out] matrix is an optional parameter to hold the calibration matrix
WiredHome	81:01da2e34283d	639	/// as a result of the calibration. This can be saved in
WiredHome	81:01da2e34283d	640	/// non-volatile memory to recover the calibration after a power fail.
WiredHome	88:bfddef6ec836	641	/// @param[in] maxwait_s is the maximum number of seconds to wait for a touch
WiredHome	88:bfddef6ec836	642	/// calibration. If no touch panel installed, it then reports
WiredHome	88:bfddef6ec836	643	/// touch_cal_timeout.
WiredHome	81:01da2e34283d	644	/// @returns success/failure code. @see RetCode_t.
WiredHome	81:01da2e34283d	645	///
WiredHome	88:bfddef6ec836	646	RetCode_t TouchPanelCalibrate(const char * msg, tpMatrix_t * matrix = NULL, int maxwait_s = 15);
WiredHome	77:9206c13aa527	647
WiredHome	77:9206c13aa527	648	/// Set the calibration matrix for the touch panel.
WiredHome	77:9206c13aa527	649	///
WiredHome	77:9206c13aa527	650	/// This method is used to set the calibration matrix for the touch panel. After
WiredHome	81:01da2e34283d	651	/// performing the calibration (@see TouchPanelComputeCalibration), the matrix can be stored.
WiredHome	77:9206c13aa527	652	/// On a subsequence power cycle, the matrix may be restored from non-volatile and
WiredHome	77:9206c13aa527	653	/// passed in to this method. It will then be held to perform the corrections when
WiredHome	77:9206c13aa527	654	/// reading the touch panel point.
WiredHome	77:9206c13aa527	655	///
WiredHome	78:faf49c381591	656	/// @code
WiredHome	78:faf49c381591	657	/// FILE * fh = fopen("/local/tpmatrix.cfg", "r");
WiredHome	78:faf49c381591	658	/// if (fh) {
WiredHome	78:faf49c381591	659	/// tpMatrix_t matrix;
WiredHome	78:faf49c381591	660	/// if (fread(fh, &matrix, sizeof(tpMatrix_t))) {
WiredHome	78:faf49c381591	661	/// lcd.TouchPanelSetMatrix(&matrix);
WiredHome	78:faf49c381591	662	/// }
WiredHome	78:faf49c381591	663	/// fclose(fh);
WiredHome	78:faf49c381591	664	/// }
WiredHome	78:faf49c381591	665	/// @endcode
WiredHome	78:faf49c381591	666	///
WiredHome	77:9206c13aa527	667	/// @param[in] matrix is a pointer to the touch panel calibration matrix.
WiredHome	77:9206c13aa527	668	/// @returns success/failure code. @see RetCode_t.
WiredHome	77:9206c13aa527	669	///
WiredHome	77:9206c13aa527	670	RetCode_t TouchPanelSetMatrix(tpMatrix_t * matrix);
WiredHome	78:faf49c381591	671
WiredHome	75:ca78388cfd77	672	#if 0
hexley	54:e117ad10fba6	673	/// Append interrupt handler for specific RA8875 interrupt source
hexley	54:e117ad10fba6	674	///
hexley	54:e117ad10fba6	675	/// @param[in] bISRType Interrupt Source, should be:
hexley	54:e117ad10fba6	676	/// - RA8875_INT_KEYSCAN: KEYCAN interrupt
hexley	54:e117ad10fba6	677	/// - RA8875_INT_DMA: DMA interrupt
hexley	54:e117ad10fba6	678	/// - RA8875_INT_TP: Touch panel interrupt
hexley	54:e117ad10fba6	679	/// - RA8875_INT_BTE: BTE process complete interrupt
hexley	54:e117ad10fba6	680	/// - RA8875_INT_BTEMCU_FONTWR: Multi-purpose interrupt (see spec sheet)
WiredHome	56:7a85d226ad0d	681	/// @param[in] fptr is a callback function to handle the interrupt event.
WiredHome	56:7a85d226ad0d	682	/// @returns none
hexley	54:e117ad10fba6	683	///
hexley	54:e117ad10fba6	684	void AppendISR(uint8_t bISRType, void(*fptr)(void));
hexley	54:e117ad10fba6	685
hexley	54:e117ad10fba6	686	/// Unappend interrupt handler for specific RA8875 interrupt source
hexley	54:e117ad10fba6	687	///
hexley	54:e117ad10fba6	688	/// @param[in] bISRType Interrupt Source, should be:
hexley	54:e117ad10fba6	689	/// - RA8875_INT_KEYSCAN: KEYCAN interrupt
hexley	54:e117ad10fba6	690	/// - RA8875_INT_DMA: DMA interrupt
hexley	54:e117ad10fba6	691	/// - RA8875_INT_TP: Touch panel interrupt
hexley	54:e117ad10fba6	692	/// - RA8875_INT_BTE: BTE process complete interrupt
hexley	54:e117ad10fba6	693	/// - RA8875_INT_BTEMCU_FONTWR: Multi-purpose interrupt (see spec sheet)
hexley	54:e117ad10fba6	694	/// @return none
hexley	54:e117ad10fba6	695	///
hexley	54:e117ad10fba6	696	void UnAppendISR(uint8_t bISRType);
WiredHome	75:ca78388cfd77	697	#endif
WiredHome	77:9206c13aa527	698
WiredHome	71:dcac8efd842d	699	/// Initialize the keypad interface on the RA8875 controller.
WiredHome	71:dcac8efd842d	700	///
WiredHome	71:dcac8efd842d	701	/// Enables the keypad subsystem. It will scan the 4 x 5 matrix
WiredHome	71:dcac8efd842d	702	/// and make available key presses.
WiredHome	71:dcac8efd842d	703	///
WiredHome	71:dcac8efd842d	704	/// @note See section 5-13 of RAIO RA8875 data sheet for more details.
WiredHome	71:dcac8efd842d	705	/// @caution When using the display from buy-display.com, be sure that
WiredHome	71:dcac8efd842d	706	/// the option for the keypad is configured on the hardware.
WiredHome	71:dcac8efd842d	707	///
WiredHome	71:dcac8efd842d	708	/// All parameters are optional.
WiredHome	76:c981284eb513	709	/// @param[in] scanEnable when true, enables the key scan function (default: true).
WiredHome	76:c981284eb513	710	/// @param[in] longDetect when true, additionally enables the long key held detection (default: false).
WiredHome	71:dcac8efd842d	711	/// @param[in] sampleTime setting (range: 0 - 3, default: 0).
WiredHome	71:dcac8efd842d	712	/// @param[in] scanFrequency setting (range: 0 - 7, default: 0).
WiredHome	71:dcac8efd842d	713	/// @param[in] longTimeAdjustment (range: 0 - 3, default: 0).
WiredHome	76:c981284eb513	714	/// @param[in] interruptEnable when true, enables interrupts from keypress (default: false).
WiredHome	76:c981284eb513	715	/// @param[in] wakeupEnable when true, activates the wakeup function (default: false).
WiredHome	71:dcac8efd842d	716	///
WiredHome	71:dcac8efd842d	717	/// @returns success/failure code. @see RetCode_t.
WiredHome	71:dcac8efd842d	718	///
WiredHome	71:dcac8efd842d	719	RetCode_t KeypadInit(bool scanEnable = true, bool longDetect = false,
WiredHome	71:dcac8efd842d	720	uint8_t sampleTime = 0, uint8_t scanFrequency = 0,
WiredHome	71:dcac8efd842d	721	uint8_t longTimeAdjustment = 0,
WiredHome	71:dcac8efd842d	722	bool interruptEnable = false, bool wakeupEnable = false);
WiredHome	71:dcac8efd842d	723
WiredHome	75:ca78388cfd77	724	/// Create Key Code definitions for the key matrix.
WiredHome	75:ca78388cfd77	725	///
WiredHome	75:ca78388cfd77	726	/// This API provides a table of 22 key-code assignments for the matrix of keys.
WiredHome	75:ca78388cfd77	727	/// This can be used to translate the keys 1 - 20 into some other value, as
WiredHome	75:ca78388cfd77	728	/// well as to communicate the "no key" (zero) and "error state" (21).
WiredHome	75:ca78388cfd77	729	///
WiredHome	75:ca78388cfd77	730	/// In this way, a keypad could easily emulate a piece of a keyboard, transforming
WiredHome	75:ca78388cfd77	731	/// 0 - 20 into the values 0, '0', '1', '2', '3', '4', '5', '6', '7', '8',
WiredHome	75:ca78388cfd77	732	/// '9', '+', '-', '*' , '/', '=', '<bs>', '<cr>', and so on...
WiredHome	75:ca78388cfd77	733	///
WiredHome	75:ca78388cfd77	734	/// @code
WiredHome	75:ca78388cfd77	735	/// // Return Value by Row, Column Example reassignment
WiredHome	75:ca78388cfd77	736	/// // Column 0 1 2 3 4
WiredHome	75:ca78388cfd77	737	/// // +-------------------------+ +-------------------------+
WiredHome	76:c981284eb513	738	/// // Row 0 \| 1 2 3 4 5 \| \| '7' '8' '9' ',' '<-' \|
WiredHome	75:ca78388cfd77	739	/// // 1 \| 6 7 8 9 10 \| \| '4' '5' '6' '/' '-' \|
WiredHome	75:ca78388cfd77	740	/// // 2 \| 11 12 13 14 15 \| \| '1' '2' '3' '*' '+' \|
WiredHome	76:c981284eb513	741	/// // 3 \| 16 17 18 19 20 \| \| '0' '.' '(' ')' '\n' \|
WiredHome	75:ca78388cfd77	742	/// // +-------------------------+ +-------------------------+
WiredHome	75:ca78388cfd77	743	/// // Return value 0 = No Key pressed
WiredHome	75:ca78388cfd77	744	/// // Return value 21 = Error
WiredHome	77:9206c13aa527	745	/// const uint8_t CodeList[22] =
WiredHome	77:9206c13aa527	746	/// {0, '7', '8', '9', ',', '\h',
WiredHome	77:9206c13aa527	747	/// '4', '5', '6', '/', '-',
WiredHome	77:9206c13aa527	748	/// '1', '2', '3', '*', '+',
WiredHome	77:9206c13aa527	749	/// '0', '.', '(', ')', '\n',
WiredHome	77:9206c13aa527	750	/// '\x1b'};
WiredHome	77:9206c13aa527	751	/// lcd.SetKeyMap(CodeList);
WiredHome	75:ca78388cfd77	752	/// @endcode
WiredHome	75:ca78388cfd77	753	///
WiredHome	75:ca78388cfd77	754	/// @param[in] CodeList is a pointer to an always available byte-array
WiredHome	75:ca78388cfd77	755	/// where the first 22 bytes are used as the transformation
WiredHome	75:ca78388cfd77	756	/// from raw code to your reassigned value.
WiredHome	75:ca78388cfd77	757	/// If CodeList is NULL, the original raw value key map is
WiredHome	75:ca78388cfd77	758	/// restored.
WiredHome	75:ca78388cfd77	759	/// @returns noerror.
WiredHome	75:ca78388cfd77	760	///
WiredHome	75:ca78388cfd77	761	RetCode_t SetKeyMap(const uint8_t * CodeList = NULL);
WiredHome	75:ca78388cfd77	762
WiredHome	71:dcac8efd842d	763	/// Determine if a key has been hit
WiredHome	71:dcac8efd842d	764	///
WiredHome	71:dcac8efd842d	765	/// @returns true if a key has been hit
WiredHome	71:dcac8efd842d	766	///
WiredHome	75:ca78388cfd77	767	bool readable();
WiredHome	71:dcac8efd842d	768
WiredHome	71:dcac8efd842d	769	/// Blocking read of the keypad.
WiredHome	71:dcac8efd842d	770	///
WiredHome	71:dcac8efd842d	771	/// @caution: This is a blocking read, so it is important to first call _kbhit()
WiredHome	71:dcac8efd842d	772	/// to avoid hanging your processes.
WiredHome	71:dcac8efd842d	773	///
WiredHome	71:dcac8efd842d	774	/// A keypad connected to the RA8875 is connected in a matrix of 4 rows and 5 columns.
WiredHome	75:ca78388cfd77	775	/// When pressed, this method will return a code in the range of 1 through 20, reserving
WiredHome	75:ca78388cfd77	776	/// the value 0 to indicate that no key is pressed.
WiredHome	71:dcac8efd842d	777	///
WiredHome	71:dcac8efd842d	778	/// Additionally, if configured to detect a "long press", bit 7 will be set to indicate
WiredHome	71:dcac8efd842d	779	/// this. In this situation, first a "normal press" would be detected and signaled and
WiredHome	71:dcac8efd842d	780	/// soon after that a "long press" of the same key would be detected and communicated.
WiredHome	71:dcac8efd842d	781	///
WiredHome	75:ca78388cfd77	782	/// @return 8-bit where bit 7 indicates a long press. The remaining bits indicate the
WiredHome	75:ca78388cfd77	783	/// keypress using 0 = no key pressed, 1 - 20 = the key pressed.
WiredHome	71:dcac8efd842d	784	///
WiredHome	75:ca78388cfd77	785	uint8_t getc();
WiredHome	75:ca78388cfd77	786
WiredHome	82:f7d300f26540	787
WiredHome	82:f7d300f26540	788	/// Determine if a point is within a rectangle.
WiredHome	82:f7d300f26540	789	///
WiredHome	82:f7d300f26540	790	/// @param[in] rect is a rectangular region to use.
WiredHome	82:f7d300f26540	791	/// @param[in] p is a point to analyze to see if it is within the rect.
WiredHome	82:f7d300f26540	792	/// @returns true if p is within rect.
WiredHome	82:f7d300f26540	793	///
WiredHome	82:f7d300f26540	794	bool Intersect(rect_t rect, point_t p);
WiredHome	82:f7d300f26540	795
WiredHome	82:f7d300f26540	796
WiredHome	38:38d503b4fad6	797	/// Write a command to the display with a word of data.
WiredHome	38:38d503b4fad6	798	///
WiredHome	38:38d503b4fad6	799	/// This is a high level command, and may invoke several primitives.
WiredHome	38:38d503b4fad6	800	///
WiredHome	72:ecffe56af969	801	/// @param[in] command is the command to write.
WiredHome	72:ecffe56af969	802	/// @param[in] data is data to be written to the command register.
WiredHome	38:38d503b4fad6	803	/// @returns success/failure code. @see RetCode_t.
WiredHome	38:38d503b4fad6	804	///
WiredHome	38:38d503b4fad6	805	RetCode_t WriteCommandW(uint8_t command, uint16_t data);
WiredHome	38:38d503b4fad6	806
WiredHome	19:3f82c1161fd2	807	/// Write a command to the display
WiredHome	19:3f82c1161fd2	808	///
WiredHome	19:3f82c1161fd2	809	/// This is a high level command, and may invoke several primitives.
WiredHome	19:3f82c1161fd2	810	///
WiredHome	72:ecffe56af969	811	/// @param[in] command is the command to write.
WiredHome	72:ecffe56af969	812	/// @param[in] data is optional data to be written to the command register
WiredHome	19:3f82c1161fd2	813	/// and only occurs if the data is in the range [0 - 0xFF].
WiredHome	19:3f82c1161fd2	814	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	815	///
WiredHome	32:0e4f2ae512e2	816	virtual RetCode_t WriteCommand(unsigned char command, unsigned int data = 0xFFFF);
WiredHome	19:3f82c1161fd2	817
WiredHome	38:38d503b4fad6	818	/// Write a data word to the display
WiredHome	38:38d503b4fad6	819	///
WiredHome	38:38d503b4fad6	820	/// This is a high level command, and may invoke several primitives.
WiredHome	38:38d503b4fad6	821	///
WiredHome	72:ecffe56af969	822	/// @param[in] data is the data to write.
WiredHome	38:38d503b4fad6	823	/// @returns success/failure code. @see RetCode_t.
WiredHome	38:38d503b4fad6	824	///
WiredHome	38:38d503b4fad6	825	RetCode_t WriteDataW(uint16_t data);
WiredHome	38:38d503b4fad6	826
WiredHome	19:3f82c1161fd2	827	/// Write a data byte to the display
WiredHome	19:3f82c1161fd2	828	///
WiredHome	19:3f82c1161fd2	829	/// This is a high level command, and may invoke several primitives.
WiredHome	19:3f82c1161fd2	830	///
WiredHome	72:ecffe56af969	831	/// @param[in] data is the data to write.
WiredHome	19:3f82c1161fd2	832	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	833	///
WiredHome	32:0e4f2ae512e2	834	virtual RetCode_t WriteData(unsigned char data);
WiredHome	19:3f82c1161fd2	835
WiredHome	19:3f82c1161fd2	836	/// Read a command register
WiredHome	19:3f82c1161fd2	837	///
WiredHome	72:ecffe56af969	838	/// @param[in] command is the command register to read.
WiredHome	19:3f82c1161fd2	839	/// @returns the value read from the register.
WiredHome	19:3f82c1161fd2	840	///
WiredHome	19:3f82c1161fd2	841	unsigned char ReadCommand(unsigned char command);
WiredHome	19:3f82c1161fd2	842
WiredHome	41:2956a0a221e5	843	/// Read a data byte from the display
WiredHome	19:3f82c1161fd2	844	///
WiredHome	19:3f82c1161fd2	845	/// This is a high level command, and may invoke several primitives.
WiredHome	19:3f82c1161fd2	846	///
WiredHome	19:3f82c1161fd2	847	/// @returns data that was read.
WiredHome	19:3f82c1161fd2	848	///
WiredHome	19:3f82c1161fd2	849	unsigned char ReadData(void);
WiredHome	19:3f82c1161fd2	850
WiredHome	41:2956a0a221e5	851	/// Read a word from the display
WiredHome	41:2956a0a221e5	852	///
WiredHome	41:2956a0a221e5	853	/// This is a high level command, and may invoke several primitives.
WiredHome	41:2956a0a221e5	854	///
WiredHome	41:2956a0a221e5	855	/// @returns data that was read.
WiredHome	41:2956a0a221e5	856	///
WiredHome	41:2956a0a221e5	857	uint16_t ReadDataW(void);
WiredHome	41:2956a0a221e5	858
WiredHome	19:3f82c1161fd2	859	/// Read the display status
WiredHome	19:3f82c1161fd2	860	///
WiredHome	19:3f82c1161fd2	861	/// This is a high level command, and may invoke several primitives.
WiredHome	19:3f82c1161fd2	862	///
WiredHome	19:3f82c1161fd2	863	/// @returns data that was read.
WiredHome	19:3f82c1161fd2	864	///
WiredHome	19:3f82c1161fd2	865	unsigned char ReadStatus(void);
WiredHome	19:3f82c1161fd2	866
WiredHome	19:3f82c1161fd2	867	/// get the width in pixels of the currently active font
WiredHome	19:3f82c1161fd2	868	///
WiredHome	19:3f82c1161fd2	869	/// @returns font width in pixels.
WiredHome	19:3f82c1161fd2	870	///
WiredHome	37:f19b7e7449dc	871	dim_t fontwidth(void);
WiredHome	19:3f82c1161fd2	872
WiredHome	19:3f82c1161fd2	873	/// get the height in pixels of the currently active font
WiredHome	19:3f82c1161fd2	874	///
WiredHome	19:3f82c1161fd2	875	/// @returns font height in pixels.
WiredHome	19:3f82c1161fd2	876	///
WiredHome	37:f19b7e7449dc	877	dim_t fontheight(void);
WiredHome	19:3f82c1161fd2	878
WiredHome	19:3f82c1161fd2	879	/// get the number of colums based on the currently active font
WiredHome	19:3f82c1161fd2	880	///
WiredHome	19:3f82c1161fd2	881	/// @returns number of columns.
WiredHome	19:3f82c1161fd2	882	///
WiredHome	19:3f82c1161fd2	883	virtual int columns(void);
WiredHome	19:3f82c1161fd2	884
WiredHome	19:3f82c1161fd2	885	/// get the number of rows based on the currently active font
WiredHome	19:3f82c1161fd2	886	///
WiredHome	19:3f82c1161fd2	887	/// @returns number of rows.
WiredHome	19:3f82c1161fd2	888	///
WiredHome	19:3f82c1161fd2	889	virtual int rows(void);
WiredHome	19:3f82c1161fd2	890
WiredHome	19:3f82c1161fd2	891	/// get the screen width in pixels
WiredHome	19:3f82c1161fd2	892	///
WiredHome	19:3f82c1161fd2	893	/// @returns screen width in pixels.
WiredHome	19:3f82c1161fd2	894	///
WiredHome	38:38d503b4fad6	895	virtual dim_t width(void);
WiredHome	19:3f82c1161fd2	896
WiredHome	19:3f82c1161fd2	897	/// get the screen height in pixels
WiredHome	19:3f82c1161fd2	898	///
WiredHome	19:3f82c1161fd2	899	/// @returns screen height in pixels.
WiredHome	19:3f82c1161fd2	900	///
WiredHome	38:38d503b4fad6	901	virtual dim_t height(void);
WiredHome	19:3f82c1161fd2	902
WiredHome	43:3becae133285	903	/// get the color depth in bits per pixel.
WiredHome	43:3becae133285	904	///
WiredHome	43:3becae133285	905	/// @returns 8 or 16 only.
WiredHome	43:3becae133285	906	///
WiredHome	43:3becae133285	907	virtual dim_t color_bpp(void);
WiredHome	43:3becae133285	908
WiredHome	19:3f82c1161fd2	909	/// Set cursor position based on the current font size.
WiredHome	19:3f82c1161fd2	910	///
WiredHome	72:ecffe56af969	911	/// @param[in] column is the horizontal position in character positions
WiredHome	72:ecffe56af969	912	/// @param[in] row is the vertical position in character positions
WiredHome	19:3f82c1161fd2	913	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	914	///
WiredHome	37:f19b7e7449dc	915	virtual RetCode_t locate(textloc_t column, textloc_t row);
WiredHome	19:3f82c1161fd2	916
WiredHome	19:3f82c1161fd2	917	/// Prepare the controller to write text to the screen by positioning
WiredHome	19:3f82c1161fd2	918	/// the cursor.
WiredHome	19:3f82c1161fd2	919	///
WiredHome	56:7a85d226ad0d	920	/// @code
WiredHome	56:7a85d226ad0d	921	/// lcd.SetTextCursor(100, 25);
WiredHome	56:7a85d226ad0d	922	/// lcd.puts("Hello");
WiredHome	56:7a85d226ad0d	923	/// @endcode
WiredHome	56:7a85d226ad0d	924	///
WiredHome	72:ecffe56af969	925	/// @param[in] x is the horizontal position in pixels (from the left edge)
WiredHome	72:ecffe56af969	926	/// @param[in] y is the vertical position in pixels (from the top edge)
WiredHome	19:3f82c1161fd2	927	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	928	///
WiredHome	37:f19b7e7449dc	929	RetCode_t SetTextCursor(loc_t x, loc_t y);
WiredHome	29:422616aa04bd	930
WiredHome	37:f19b7e7449dc	931	/// Get the current cursor position in pixels.
WiredHome	37:f19b7e7449dc	932	///
WiredHome	56:7a85d226ad0d	933	/// @code
WiredHome	56:7a85d226ad0d	934	/// point_t point = GetTextCursor();
WiredHome	56:7a85d226ad0d	935	/// if (point.x > 100 && point.y > 150)
WiredHome	56:7a85d226ad0d	936	/// //...
WiredHome	56:7a85d226ad0d	937	/// @endcode
WiredHome	56:7a85d226ad0d	938	///
WiredHome	37:f19b7e7449dc	939	/// @returns cursor position.
WiredHome	37:f19b7e7449dc	940	///
WiredHome	37:f19b7e7449dc	941	point_t GetTextCursor(void);
WiredHome	37:f19b7e7449dc	942
WiredHome	29:422616aa04bd	943	/// Get the current cursor horizontal position in pixels.
WiredHome	29:422616aa04bd	944	///
WiredHome	29:422616aa04bd	945	/// @returns cursor position horizontal offset.
WiredHome	29:422616aa04bd	946	///
WiredHome	37:f19b7e7449dc	947	loc_t GetTextCursor_X(void);
WiredHome	29:422616aa04bd	948
WiredHome	29:422616aa04bd	949	/// Get the current cursor vertical position in pixels.
WiredHome	29:422616aa04bd	950	///
WiredHome	29:422616aa04bd	951	/// @returns cursor position vertical offset.
WiredHome	29:422616aa04bd	952	///
WiredHome	37:f19b7e7449dc	953	loc_t GetTextCursor_Y(void);
WiredHome	29:422616aa04bd	954
WiredHome	23:a50ded45dbaf	955	/// Configure additional Cursor Control settings.
WiredHome	23:a50ded45dbaf	956	///
WiredHome	23:a50ded45dbaf	957	/// This API lets you modify other cursor control settings;
WiredHome	23:a50ded45dbaf	958	/// Cursor visible/hidden, Cursor blink/normal,
WiredHome	23:a50ded45dbaf	959	/// Cursor I-Beam/underscore/box.
WiredHome	23:a50ded45dbaf	960	///
WiredHome	72:ecffe56af969	961	/// @param[in] cursor can be set to NOCURSOR (default), IBEAM,
WiredHome	24:8ca861acf12d	962	/// UNDER, or BLOCK.
WiredHome	72:ecffe56af969	963	/// @param[in] blink can be set to true or false (default false)
WiredHome	23:a50ded45dbaf	964	/// @returns success/failure code. @see RetCode_t
WiredHome	23:a50ded45dbaf	965	///
WiredHome	24:8ca861acf12d	966	RetCode_t SetTextCursorControl(cursor_t cursor = NOCURSOR, bool blink = false);
WiredHome	23:a50ded45dbaf	967
WiredHome	19:3f82c1161fd2	968	/// Select the ISO 8859-X font to use next.
WiredHome	19:3f82c1161fd2	969	///
WiredHome	19:3f82c1161fd2	970	/// Supported fonts: ISO 8859-1, -2, -3, -4
WiredHome	19:3f82c1161fd2	971	///
WiredHome	72:ecffe56af969	972	/// @param[in] font selects the font for the subsequent text rendering.
WiredHome	19:3f82c1161fd2	973	///
WiredHome	19:3f82c1161fd2	974	/// @note if either hScale or vScale is outside of its permitted range,
WiredHome	19:3f82c1161fd2	975	/// the command is not executed.
WiredHome	19:3f82c1161fd2	976	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	977	///
WiredHome	19:3f82c1161fd2	978	RetCode_t SetTextFont(font_t font = ISO8859_1);
WiredHome	19:3f82c1161fd2	979
WiredHome	84:e102021864b5	980	/// Sets the display orientation.
WiredHome	84:e102021864b5	981	///
WiredHome	84:e102021864b5	982	/// @note This command does not let you "merge" text onto an existing
WiredHome	84:e102021864b5	983	/// image, since it reuses the memory for the new orientation.
WiredHome	84:e102021864b5	984	/// Therefore, it is recommended that you issue a cls() prior
WiredHome	84:e102021864b5	985	/// to sending text to the screen, or you end with a blended
WiredHome	84:e102021864b5	986	/// image that is probably not as intended.
WiredHome	84:e102021864b5	987	///
WiredHome	84:e102021864b5	988	/// @code
WiredHome	84:e102021864b5	989	/// lcd.cls();
WiredHome	84:e102021864b5	990	/// lcd.SetOrientation(RA8875::normal);
WiredHome	84:e102021864b5	991	/// lcd.puts(30,30, "Normal Landscape");
WiredHome	84:e102021864b5	992	/// wait_ms(2500);
WiredHome	84:e102021864b5	993	///
WiredHome	84:e102021864b5	994	/// lcd.cls();
WiredHome	84:e102021864b5	995	/// lcd.SetOrientation(RA8875::rotate_90);
WiredHome	84:e102021864b5	996	/// lcd.puts(30,30, "Rotated 90 Text\r\n");
WiredHome	84:e102021864b5	997	/// wait_ms(2500);
WiredHome	84:e102021864b5	998	///
WiredHome	84:e102021864b5	999	/// lcd.cls();
WiredHome	84:e102021864b5	1000	/// lcd.SetOrientation(RA8875::rotate_180);
WiredHome	84:e102021864b5	1001	/// lcd.puts(30,30, "Rotated 180 Text\r\n");
WiredHome	84:e102021864b5	1002	/// wait_ms(2500);
WiredHome	84:e102021864b5	1003	///
WiredHome	84:e102021864b5	1004	/// lcd.cls();
WiredHome	84:e102021864b5	1005	/// lcd.SetOrientation(RA8875::rotate_270);
WiredHome	84:e102021864b5	1006	/// lcd.puts(30,30, "Rotated 270 Text\r\n");
WiredHome	84:e102021864b5	1007	/// wait_ms(2500);
WiredHome	84:e102021864b5	1008	/// @endcode
WiredHome	84:e102021864b5	1009	///
WiredHome	84:e102021864b5	1010	/// @param[in] angle defaults to normal, but can be rotated
WiredHome	84:e102021864b5	1011	/// - normal \| rotate_0
WiredHome	84:e102021864b5	1012	/// - rotate_90 (clockwise)
WiredHome	84:e102021864b5	1013	/// - rotate_180
WiredHome	84:e102021864b5	1014	/// - rotate_270 (clockwise)
WiredHome	84:e102021864b5	1015	/// @returns success/failure code. @see RetCode_t.
WiredHome	84:e102021864b5	1016	///
WiredHome	84:e102021864b5	1017	RetCode_t SetOrientation(orientation_t angle = normal);
WiredHome	84:e102021864b5	1018
WiredHome	19:3f82c1161fd2	1019	/// Control the font behavior.
WiredHome	19:3f82c1161fd2	1020	///
WiredHome	19:3f82c1161fd2	1021	/// This command lets you make several modifications to any text that
WiredHome	56:7a85d226ad0d	1022	/// will be written to the screen.
WiredHome	19:3f82c1161fd2	1023	///
WiredHome	19:3f82c1161fd2	1024	/// Options can be combined:
WiredHome	19:3f82c1161fd2	1025	/// Default:
WiredHome	19:3f82c1161fd2	1026	/// @li Full alignment disabled,
WiredHome	19:3f82c1161fd2	1027	/// @li Font with Background color,
WiredHome	84:e102021864b5	1028	/// @li Font in normal orientiation, or rotated 90, 180, or 270 clockwise,
WiredHome	84:e102021864b5	1029	/// @li Horizontal scale x 1, 2, 3, or 4
WiredHome	84:e102021864b5	1030	/// @li Vertical scale x 1, 2, 3, or 4
WiredHome	84:e102021864b5	1031	///
WiredHome	84:e102021864b5	1032	/// @note alignment is a special mode for the fonts, when mixing half and
WiredHome	84:e102021864b5	1033	/// full fonts on one presentation. 'align_full' starts each full
WiredHome	84:e102021864b5	1034	/// character on an even alignment. See section 7-4-7 of the RA8875
WiredHome	84:e102021864b5	1035	/// specification.
WiredHome	19:3f82c1161fd2	1036	///
WiredHome	72:ecffe56af969	1037	/// @param[in] fillit defaults to FILL, but can be NOFILL
WiredHome	72:ecffe56af969	1038	/// @param[in] hScale defaults to 1, but can be 1, 2, 3, or 4,
WiredHome	19:3f82c1161fd2	1039	/// and scales the font size by this amount.
WiredHome	72:ecffe56af969	1040	/// @param[in] vScale defaults to 1, but can be 1, 2, 3, or 4,
WiredHome	19:3f82c1161fd2	1041	/// and scales the font size by this amount.
WiredHome	72:ecffe56af969	1042	/// @param[in] alignment defaults to align_none, but can be
WiredHome	19:3f82c1161fd2	1043	/// align_full.
WiredHome	19:3f82c1161fd2	1044	///
WiredHome	19:3f82c1161fd2	1045	/// @note if either hScale or vScale is outside of its permitted range,
WiredHome	19:3f82c1161fd2	1046	/// the command is not executed.
WiredHome	19:3f82c1161fd2	1047	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1048	///
WiredHome	19:3f82c1161fd2	1049	RetCode_t SetTextFontControl(fill_t fillit = FILL,
WiredHome	19:3f82c1161fd2	1050	HorizontalScale hScale = 1,
WiredHome	19:3f82c1161fd2	1051	VerticalScale vScale = 1,
WiredHome	19:3f82c1161fd2	1052	alignment_t alignment = align_none);
WiredHome	19:3f82c1161fd2	1053
WiredHome	19:3f82c1161fd2	1054	/// Control the font size
WiredHome	19:3f82c1161fd2	1055	///
WiredHome	19:3f82c1161fd2	1056	/// This command lets you set the font enlargement for both horizontal
WiredHome	19:3f82c1161fd2	1057	/// and vertical, independent of the rotation, background, and
WiredHome	19:3f82c1161fd2	1058	/// alignment. @see SetTextFontControl.
WiredHome	19:3f82c1161fd2	1059	///
WiredHome	72:ecffe56af969	1060	/// @param[in] hScale defaults to 1, but can be 1, 2, 3, or 4,
WiredHome	19:3f82c1161fd2	1061	/// and scales the font size by this amount.
WiredHome	72:ecffe56af969	1062	/// @param[in] vScale is an optional parameter that defaults to the hScale value,
WiredHome	40:04aa280dfa39	1063	/// but can be 1, 2, 3, or 4, and scales the font size by this amount.
WiredHome	40:04aa280dfa39	1064	///
WiredHome	40:04aa280dfa39	1065	/// @code
WiredHome	40:04aa280dfa39	1066	/// lcd.SetTextFontSize(2); // Set the font to 2x normal size
WiredHome	56:7a85d226ad0d	1067	/// lcd.puts("Two times");
WiredHome	40:04aa280dfa39	1068	/// lcd.SetTextFontSize(2,3); // Set the font to 2x Width and 3x Height
WiredHome	56:7a85d226ad0d	1069	/// lcd.puts("22 3h");
WiredHome	40:04aa280dfa39	1070	/// lcd.SetTextFontSize(); // Restore to normal size in both dimensions
WiredHome	56:7a85d226ad0d	1071	/// lcd.puts("normal");
WiredHome	40:04aa280dfa39	1072	/// @endcode
WiredHome	19:3f82c1161fd2	1073	///
WiredHome	19:3f82c1161fd2	1074	/// @note if either hScale or vScale is outside of its permitted range,
WiredHome	19:3f82c1161fd2	1075	/// the command is not executed.
WiredHome	19:3f82c1161fd2	1076	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1077	///
WiredHome	40:04aa280dfa39	1078	RetCode_t SetTextFontSize(HorizontalScale hScale = 1, VerticalScale vScale = -1);
WiredHome	19:3f82c1161fd2	1079
WiredHome	19:3f82c1161fd2	1080	/// put a character on the screen.
WiredHome	19:3f82c1161fd2	1081	///
WiredHome	72:ecffe56af969	1082	/// @param[in] c is the character.
WiredHome	19:3f82c1161fd2	1083	/// @returns the character, or EOF if there is an error.
WiredHome	19:3f82c1161fd2	1084	///
WiredHome	19:3f82c1161fd2	1085	virtual int _putc(int c);
WiredHome	19:3f82c1161fd2	1086
WiredHome	19:3f82c1161fd2	1087	/// Write string of text to the display
WiredHome	19:3f82c1161fd2	1088	///
WiredHome	56:7a85d226ad0d	1089	/// @code
WiredHome	56:7a85d226ad0d	1090	/// lcd.puts("Test STring");
WiredHome	56:7a85d226ad0d	1091	/// @endcode
WiredHome	56:7a85d226ad0d	1092	///
WiredHome	72:ecffe56af969	1093	/// @param[in] string is the null terminated string to send to the display.
WiredHome	19:3f82c1161fd2	1094	///
WiredHome	19:3f82c1161fd2	1095	void puts(const char * string);
WiredHome	19:3f82c1161fd2	1096
WiredHome	19:3f82c1161fd2	1097	/// Write string of text to the display at the specified location.
WiredHome	19:3f82c1161fd2	1098	///
WiredHome	56:7a85d226ad0d	1099	/// @code
WiredHome	56:7a85d226ad0d	1100	/// lcd.puts(10,25, "Test STring");
WiredHome	56:7a85d226ad0d	1101	/// @endcode
WiredHome	56:7a85d226ad0d	1102	///
WiredHome	72:ecffe56af969	1103	/// @param[in] x is the horizontal position in pixels (from the left edge)
WiredHome	72:ecffe56af969	1104	/// @param[in] y is the vertical position in pixels (from the top edge)
WiredHome	72:ecffe56af969	1105	/// @param[in] string is the null terminated string to send to the display.
WiredHome	19:3f82c1161fd2	1106	///
WiredHome	37:f19b7e7449dc	1107	void puts(loc_t x, loc_t y, const char * string);
WiredHome	19:3f82c1161fd2	1108
WiredHome	19:3f82c1161fd2	1109	/// Prepare the controller to write binary data to the screen by positioning
WiredHome	19:3f82c1161fd2	1110	/// the memory cursor.
WiredHome	19:3f82c1161fd2	1111	///
WiredHome	72:ecffe56af969	1112	/// @param[in] x is the horizontal position in pixels (from the left edge)
WiredHome	72:ecffe56af969	1113	/// @param[in] y is the vertical position in pixels (from the top edge)
WiredHome	19:3f82c1161fd2	1114	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1115	///
WiredHome	37:f19b7e7449dc	1116	virtual RetCode_t SetGraphicsCursor(loc_t x, loc_t y);
WiredHome	19:3f82c1161fd2	1117
WiredHome	41:2956a0a221e5	1118	/// Prepare the controller to read binary data from the screen by positioning
WiredHome	41:2956a0a221e5	1119	/// the memory read cursor.
WiredHome	41:2956a0a221e5	1120	///
WiredHome	72:ecffe56af969	1121	/// @param[in] x is the horizontal position in pixels (from the left edge)
WiredHome	72:ecffe56af969	1122	/// @param[in] y is the vertical position in pixels (from the top edge)
WiredHome	41:2956a0a221e5	1123	/// @returns success/failure code. @see RetCode_t.
WiredHome	41:2956a0a221e5	1124	///
WiredHome	41:2956a0a221e5	1125	virtual RetCode_t SetGraphicsCursorRead(loc_t x, loc_t y);
WiredHome	41:2956a0a221e5	1126
WiredHome	19:3f82c1161fd2	1127	/// Set the window, which controls where items are written to the screen.
WiredHome	19:3f82c1161fd2	1128	///
WiredHome	19:3f82c1161fd2	1129	/// When something hits the window width, it wraps back to the left side
WiredHome	19:3f82c1161fd2	1130	/// and down a row. If the initial write is outside the window, it will
WiredHome	19:3f82c1161fd2	1131	/// be captured into the window when it crosses a boundary.
WiredHome	19:3f82c1161fd2	1132	///
WiredHome	56:7a85d226ad0d	1133	/// @code
WiredHome	56:7a85d226ad0d	1134	/// lcd.window(10,10, 80,80);
WiredHome	56:7a85d226ad0d	1135	/// lcd.puts("012345678901234567890123456789012345678901234567890");
WiredHome	56:7a85d226ad0d	1136	/// @endcode
WiredHome	56:7a85d226ad0d	1137	///
WiredHome	72:ecffe56af969	1138	/// @param[in] x is the left edge in pixels.
WiredHome	72:ecffe56af969	1139	/// @param[in] y is the top edge in pixels.
WiredHome	72:ecffe56af969	1140	/// @param[in] width is the window width in pixels.
WiredHome	72:ecffe56af969	1141	/// @param[in] height is the window height in pixels.
WiredHome	19:3f82c1161fd2	1142	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1143	///
WiredHome	37:f19b7e7449dc	1144	virtual RetCode_t window(loc_t x, loc_t y, dim_t width, dim_t height);
WiredHome	19:3f82c1161fd2	1145
WiredHome	61:8f3153bf0baa	1146	/// Clear either the specified layer, or the active layer.
WiredHome	19:3f82c1161fd2	1147	///
WiredHome	61:8f3153bf0baa	1148	/// The behavior is to clear the whole screen for the specified
WiredHome	61:8f3153bf0baa	1149	/// layer. When not specified, the active drawing layer is cleared.
WiredHome	61:8f3153bf0baa	1150	/// This command can also be used to specifically clear either,
WiredHome	61:8f3153bf0baa	1151	/// or both layers. @see clsw().
WiredHome	19:3f82c1161fd2	1152	///
WiredHome	56:7a85d226ad0d	1153	/// @code
WiredHome	56:7a85d226ad0d	1154	/// lcd.cls();
WiredHome	56:7a85d226ad0d	1155	/// @endcode
WiredHome	56:7a85d226ad0d	1156	///
WiredHome	72:ecffe56af969	1157	/// @param[in] layers is optional. If not provided, the active layer
WiredHome	61:8f3153bf0baa	1158	/// is cleared. If bit 0 is set, layer 0 is cleared, if bit
WiredHome	61:8f3153bf0baa	1159	/// 1 is set, layer 1 is cleared. If both are set, both layers
WiredHome	61:8f3153bf0baa	1160	/// are cleared. Any other value does not cause an action.
WiredHome	61:8f3153bf0baa	1161	///
WiredHome	19:3f82c1161fd2	1162	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1163	///
WiredHome	61:8f3153bf0baa	1164	virtual RetCode_t cls(uint16_t layers = 0);
WiredHome	19:3f82c1161fd2	1165
WiredHome	19:3f82c1161fd2	1166	/// Clear the screen, or clear only the active window.
WiredHome	19:3f82c1161fd2	1167	///
WiredHome	19:3f82c1161fd2	1168	/// The default behavior is to clear the whole screen. With the optional
WiredHome	19:3f82c1161fd2	1169	/// parameter, the action can be restricted to the active window, which
WiredHome	32:0e4f2ae512e2	1170	/// can be set with the @see window method.
WiredHome	19:3f82c1161fd2	1171	///
WiredHome	56:7a85d226ad0d	1172	/// @code
WiredHome	56:7a85d226ad0d	1173	/// lcd.window(20,20, 40,10);
WiredHome	56:7a85d226ad0d	1174	/// lcd.clsw();
WiredHome	56:7a85d226ad0d	1175	/// @endcode
WiredHome	56:7a85d226ad0d	1176	///
WiredHome	72:ecffe56af969	1177	/// @param[in] region is an optional parameter that defaults to FULLWINDOW
WiredHome	19:3f82c1161fd2	1178	/// or may be set to ACTIVEWINDOW.
WiredHome	19:3f82c1161fd2	1179	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1180	///
WiredHome	19:3f82c1161fd2	1181	RetCode_t clsw(RA8875::Region_t region = FULLWINDOW);
WiredHome	19:3f82c1161fd2	1182
WiredHome	19:3f82c1161fd2	1183	/// Set the background color.
WiredHome	19:3f82c1161fd2	1184	///
WiredHome	72:ecffe56af969	1185	/// @param[in] color is expressed in 16-bit format.
WiredHome	19:3f82c1161fd2	1186	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1187	///
WiredHome	19:3f82c1161fd2	1188	virtual RetCode_t background(color_t color);
WiredHome	19:3f82c1161fd2	1189
WiredHome	19:3f82c1161fd2	1190	/// Set the background color.
WiredHome	19:3f82c1161fd2	1191	///
WiredHome	72:ecffe56af969	1192	/// @param[in] r is the red element of the color.
WiredHome	72:ecffe56af969	1193	/// @param[in] g is the green element of the color.
WiredHome	72:ecffe56af969	1194	/// @param[in] b is the blue element of the color.
WiredHome	19:3f82c1161fd2	1195	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1196	///
WiredHome	19:3f82c1161fd2	1197	virtual RetCode_t background(unsigned char r, unsigned char g, unsigned char b);
WiredHome	19:3f82c1161fd2	1198
WiredHome	19:3f82c1161fd2	1199	/// Set the foreground color.
WiredHome	19:3f82c1161fd2	1200	///
WiredHome	72:ecffe56af969	1201	/// @param[in] color is expressed in 16-bit format.
WiredHome	19:3f82c1161fd2	1202	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1203	///
WiredHome	19:3f82c1161fd2	1204	virtual RetCode_t foreground(color_t color);
WiredHome	19:3f82c1161fd2	1205
WiredHome	19:3f82c1161fd2	1206	/// Set the foreground color.
WiredHome	19:3f82c1161fd2	1207	///
WiredHome	72:ecffe56af969	1208	/// @param[in] r is the red element of the color.
WiredHome	72:ecffe56af969	1209	/// @param[in] g is the green element of the color.
WiredHome	72:ecffe56af969	1210	/// @param[in] b is the blue element of the color.
WiredHome	19:3f82c1161fd2	1211	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1212	///
WiredHome	37:f19b7e7449dc	1213	virtual RetCode_t foreground(unsigned char r, unsigned char g, unsigned char b);
WiredHome	19:3f82c1161fd2	1214
WiredHome	19:3f82c1161fd2	1215	/// Get the current foreground color value.
WiredHome	19:3f82c1161fd2	1216	///
WiredHome	19:3f82c1161fd2	1217	/// @returns the current foreground color.
WiredHome	19:3f82c1161fd2	1218	///
WiredHome	37:f19b7e7449dc	1219	color_t GetForeColor(void);
WiredHome	87:ee2240581aa7	1220
WiredHome	87:ee2240581aa7	1221	/// Draw a pixel in the specified color.
WiredHome	87:ee2240581aa7	1222	///
WiredHome	87:ee2240581aa7	1223	/// @note Unlike many other operations, this does not
WiredHome	87:ee2240581aa7	1224	/// set the forecolor!
WiredHome	87:ee2240581aa7	1225	///
WiredHome	87:ee2240581aa7	1226	/// @param[in] p is the point_t defining the location.
WiredHome	87:ee2240581aa7	1227	/// @returns success/failure code. @see RetCode_t.
WiredHome	87:ee2240581aa7	1228	///
WiredHome	87:ee2240581aa7	1229	virtual RetCode_t pixel(point_t p, color_t color);
WiredHome	87:ee2240581aa7	1230
WiredHome	87:ee2240581aa7	1231	/// Draw a pixel in the current foreground color.
WiredHome	87:ee2240581aa7	1232	///
WiredHome	87:ee2240581aa7	1233	/// @param[in] p is the point_t defining the location.
WiredHome	87:ee2240581aa7	1234	/// @returns success/failure code. @see RetCode_t.
WiredHome	87:ee2240581aa7	1235	///
WiredHome	87:ee2240581aa7	1236	virtual RetCode_t pixel(point_t p);
WiredHome	19:3f82c1161fd2	1237
WiredHome	19:3f82c1161fd2	1238	/// Draw a pixel in the specified color.
WiredHome	19:3f82c1161fd2	1239	///
WiredHome	41:2956a0a221e5	1240	/// @note Unlike many other operations, this does not
WiredHome	41:2956a0a221e5	1241	/// set the forecolor!
WiredHome	19:3f82c1161fd2	1242	///
WiredHome	72:ecffe56af969	1243	/// @param[in] x is the horizontal offset to this pixel.
WiredHome	72:ecffe56af969	1244	/// @param[in] y is the vertical offset to this pixel.
WiredHome	72:ecffe56af969	1245	/// @param[in] color defines the color for the pixel.
WiredHome	19:3f82c1161fd2	1246	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1247	///
WiredHome	37:f19b7e7449dc	1248	virtual RetCode_t pixel(loc_t x, loc_t y, color_t color);
WiredHome	19:3f82c1161fd2	1249
WiredHome	19:3f82c1161fd2	1250	/// Draw a pixel in the current foreground color.
WiredHome	19:3f82c1161fd2	1251	///
WiredHome	72:ecffe56af969	1252	/// @param[in] x is the horizontal offset to this pixel.
WiredHome	72:ecffe56af969	1253	/// @param[in] y is the veritical offset to this pixel.
WiredHome	19:3f82c1161fd2	1254	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1255	///
WiredHome	37:f19b7e7449dc	1256	virtual RetCode_t pixel(loc_t x, loc_t y);
WiredHome	19:3f82c1161fd2	1257
WiredHome	41:2956a0a221e5	1258	/// Get a pixel from the display.
WiredHome	41:2956a0a221e5	1259	///
WiredHome	72:ecffe56af969	1260	/// @param[in] x is the horizontal offset to this pixel.
WiredHome	72:ecffe56af969	1261	/// @param[in] y is the vertical offset to this pixel.
WiredHome	41:2956a0a221e5	1262	/// @returns the pixel. see @color_t
WiredHome	41:2956a0a221e5	1263	///
WiredHome	41:2956a0a221e5	1264	virtual color_t getPixel(loc_t x, loc_t y);
WiredHome	41:2956a0a221e5	1265
WiredHome	41:2956a0a221e5	1266	/// Write a stream of pixels to the display.
WiredHome	41:2956a0a221e5	1267	///
WiredHome	72:ecffe56af969	1268	/// @param[in] p is a pointer to a color_t array to write.
WiredHome	72:ecffe56af969	1269	/// @param[in] count is the number of pixels to write.
WiredHome	72:ecffe56af969	1270	/// @param[in] x is the horizontal position on the display.
WiredHome	72:ecffe56af969	1271	/// @param[in] y is the vertical position on the display.
WiredHome	41:2956a0a221e5	1272	/// @returns success/failure code. @see RetCode_t.
WiredHome	41:2956a0a221e5	1273	///
WiredHome	41:2956a0a221e5	1274	virtual RetCode_t pixelStream(color_t * p, uint32_t count, loc_t x, loc_t y);
WiredHome	41:2956a0a221e5	1275
WiredHome	41:2956a0a221e5	1276	/// Get a stream of pixels from the display.
WiredHome	41:2956a0a221e5	1277	///
WiredHome	72:ecffe56af969	1278	/// @param[in] p is a pointer to a color_t array to accept the stream.
WiredHome	72:ecffe56af969	1279	/// @param[in] count is the number of pixels to read.
WiredHome	72:ecffe56af969	1280	/// @param[in] x is the horizontal offset to this pixel.
WiredHome	72:ecffe56af969	1281	/// @param[in] y is the vertical offset to this pixel.
WiredHome	41:2956a0a221e5	1282	/// @returns success/failure code. @see RetCode_t.
WiredHome	41:2956a0a221e5	1283	///
WiredHome	41:2956a0a221e5	1284	virtual RetCode_t getPixelStream(color_t * p, uint32_t count, loc_t x, loc_t y);
WiredHome	41:2956a0a221e5	1285
WiredHome	19:3f82c1161fd2	1286	/// Draw a line in the specified color
WiredHome	19:3f82c1161fd2	1287	///
WiredHome	19:3f82c1161fd2	1288	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1289	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1290	///
WiredHome	83:7bad0068cca0	1291	/// @param[in] p1 is the point to start the line.
WiredHome	83:7bad0068cca0	1292	/// @param[in] p2 is the point to end the line.
WiredHome	83:7bad0068cca0	1293	/// @param[in] color defines the foreground color.
WiredHome	83:7bad0068cca0	1294	/// @returns success/failure code. @see RetCode_t.
WiredHome	83:7bad0068cca0	1295	///
WiredHome	83:7bad0068cca0	1296	RetCode_t line(point_t p1, point_t p2, color_t color);
WiredHome	83:7bad0068cca0	1297
WiredHome	83:7bad0068cca0	1298	/// Draw a line
WiredHome	83:7bad0068cca0	1299	///
WiredHome	83:7bad0068cca0	1300	/// Draws a line using the foreground color setting.
WiredHome	83:7bad0068cca0	1301	///
WiredHome	83:7bad0068cca0	1302	/// @param[in] p1 is the point to start the line.
WiredHome	83:7bad0068cca0	1303	/// @param[in] p2 is the point to end the line.
WiredHome	83:7bad0068cca0	1304	/// @returns success/failure code. @see RetCode_t.
WiredHome	83:7bad0068cca0	1305	///
WiredHome	83:7bad0068cca0	1306	RetCode_t line(point_t p1, point_t p2);
WiredHome	83:7bad0068cca0	1307
WiredHome	83:7bad0068cca0	1308	/// Draw a line in the specified color
WiredHome	83:7bad0068cca0	1309	///
WiredHome	83:7bad0068cca0	1310	/// @note As a side effect, this changes the current
WiredHome	83:7bad0068cca0	1311	/// foreground color for subsequent operations.
WiredHome	83:7bad0068cca0	1312	///
WiredHome	72:ecffe56af969	1313	/// @param[in] x1 is the horizontal start of the line.
WiredHome	72:ecffe56af969	1314	/// @param[in] y1 is the vertical start of the line.
WiredHome	72:ecffe56af969	1315	/// @param[in] x2 is the horizontal end of the line.
WiredHome	72:ecffe56af969	1316	/// @param[in] y2 is the vertical end of the line.
WiredHome	72:ecffe56af969	1317	/// @param[in] color defines the foreground color.
WiredHome	19:3f82c1161fd2	1318	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1319	///
WiredHome	56:7a85d226ad0d	1320	RetCode_t line(loc_t x1, loc_t y1, loc_t x2, loc_t y2, color_t color);
WiredHome	19:3f82c1161fd2	1321
WiredHome	19:3f82c1161fd2	1322	/// Draw a line
WiredHome	19:3f82c1161fd2	1323	///
WiredHome	19:3f82c1161fd2	1324	/// Draws a line using the foreground color setting.
WiredHome	19:3f82c1161fd2	1325	///
WiredHome	72:ecffe56af969	1326	/// @param[in] x1 is the horizontal start of the line.
WiredHome	72:ecffe56af969	1327	/// @param[in] y1 is the vertical start of the line.
WiredHome	72:ecffe56af969	1328	/// @param[in] x2 is the horizontal end of the line.
WiredHome	72:ecffe56af969	1329	/// @param[in] y2 is the vertical end of the line.
WiredHome	19:3f82c1161fd2	1330	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1331	///
WiredHome	37:f19b7e7449dc	1332	RetCode_t line(loc_t x1, loc_t y1, loc_t x2, loc_t y2);
WiredHome	19:3f82c1161fd2	1333
WiredHome	19:3f82c1161fd2	1334	/// Draw a rectangle in the specified color
WiredHome	19:3f82c1161fd2	1335	///
WiredHome	19:3f82c1161fd2	1336	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1337	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1338	///
WiredHome	81:01da2e34283d	1339	/// @param[in] rect defines the rectangle.
WiredHome	81:01da2e34283d	1340	/// @param[in] color defines the foreground color.
WiredHome	81:01da2e34283d	1341	/// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome	81:01da2e34283d	1342	/// @returns success/failure code. @see RetCode_t.
WiredHome	81:01da2e34283d	1343	///
WiredHome	82:f7d300f26540	1344	RetCode_t rect(rect_t rect, color_t color, fill_t fillit = NOFILL);
WiredHome	81:01da2e34283d	1345
WiredHome	81:01da2e34283d	1346	/// Draw a filled rectangle in the specified color
WiredHome	81:01da2e34283d	1347	///
WiredHome	81:01da2e34283d	1348	/// @note As a side effect, this changes the current
WiredHome	81:01da2e34283d	1349	/// foreground color for subsequent operations.
WiredHome	81:01da2e34283d	1350	///
WiredHome	81:01da2e34283d	1351	/// @param[in] rect defines the rectangle.
WiredHome	81:01da2e34283d	1352	/// @param[in] color defines the foreground color.
WiredHome	81:01da2e34283d	1353	/// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome	81:01da2e34283d	1354	/// @returns success/failure code. @see RetCode_t.
WiredHome	81:01da2e34283d	1355	///
WiredHome	81:01da2e34283d	1356	RetCode_t fillrect(rect_t rect, color_t color, fill_t fillit = FILL);
WiredHome	81:01da2e34283d	1357
WiredHome	81:01da2e34283d	1358	/// Draw a rectangle in the specified color
WiredHome	81:01da2e34283d	1359	///
WiredHome	81:01da2e34283d	1360	/// @note As a side effect, this changes the current
WiredHome	81:01da2e34283d	1361	/// foreground color for subsequent operations.
WiredHome	81:01da2e34283d	1362	///
WiredHome	72:ecffe56af969	1363	/// @param[in] x1 is the horizontal start of the line.
WiredHome	72:ecffe56af969	1364	/// @param[in] y1 is the vertical start of the line.
WiredHome	72:ecffe56af969	1365	/// @param[in] x2 is the horizontal end of the line.
WiredHome	72:ecffe56af969	1366	/// @param[in] y2 is the vertical end of the line.
WiredHome	72:ecffe56af969	1367	/// @param[in] color defines the foreground color.
WiredHome	81:01da2e34283d	1368	/// @param[in] fillit is optional to FILL the rectangle. default is FILL.
WiredHome	19:3f82c1161fd2	1369	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1370	///
WiredHome	37:f19b7e7449dc	1371	RetCode_t rect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome	19:3f82c1161fd2	1372	color_t color, fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1373
WiredHome	19:3f82c1161fd2	1374	/// Draw a filled rectangle in the specified color
WiredHome	19:3f82c1161fd2	1375	///
WiredHome	19:3f82c1161fd2	1376	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1377	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1378	///
WiredHome	72:ecffe56af969	1379	/// @param[in] x1 is the horizontal start of the line.
WiredHome	72:ecffe56af969	1380	/// @param[in] y1 is the vertical start of the line.
WiredHome	72:ecffe56af969	1381	/// @param[in] x2 is the horizontal end of the line.
WiredHome	72:ecffe56af969	1382	/// @param[in] y2 is the vertical end of the line.
WiredHome	72:ecffe56af969	1383	/// @param[in] color defines the foreground color.
WiredHome	72:ecffe56af969	1384	/// @param[in] fillit is optional to NOFILL the rectangle. default is FILL.
WiredHome	19:3f82c1161fd2	1385	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1386	///
WiredHome	37:f19b7e7449dc	1387	virtual RetCode_t fillrect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome	19:3f82c1161fd2	1388	color_t color, fill_t fillit = FILL);
WiredHome	19:3f82c1161fd2	1389
WiredHome	19:3f82c1161fd2	1390	/// Draw a rectangle
WiredHome	19:3f82c1161fd2	1391	///
WiredHome	19:3f82c1161fd2	1392	/// Draws a rectangle using the foreground color setting.
WiredHome	19:3f82c1161fd2	1393	///
WiredHome	72:ecffe56af969	1394	/// @param[in] x1 is the horizontal start of the line.
WiredHome	72:ecffe56af969	1395	/// @param[in] y1 is the vertical start of the line.
WiredHome	72:ecffe56af969	1396	/// @param[in] x2 is the horizontal end of the line.
WiredHome	72:ecffe56af969	1397	/// @param[in] y2 is the vertical end of the line.
WiredHome	72:ecffe56af969	1398	/// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome	19:3f82c1161fd2	1399	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1400	///
WiredHome	37:f19b7e7449dc	1401	RetCode_t rect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome	19:3f82c1161fd2	1402	fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1403
WiredHome	19:3f82c1161fd2	1404	/// Draw a filled rectangle with rounded corners using the specified color.
WiredHome	19:3f82c1161fd2	1405	///
WiredHome	21:3c1efb192927	1406	/// This draws a rounded rectangle. A numbers of checks are made on the values,
WiredHome	21:3c1efb192927	1407	/// and it could reduce this to drawing a line (if either x1 == x2, or y1 == y2),
WiredHome	21:3c1efb192927	1408	/// or a single point (x1 == x2 && y1 == y2). If the radius parameters are
WiredHome	21:3c1efb192927	1409	/// > 1/2 the length of that side (width or height), an error value is returned.
WiredHome	21:3c1efb192927	1410	///
WiredHome	19:3f82c1161fd2	1411	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1412	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1413	///
WiredHome	72:ecffe56af969	1414	/// @param[in] x1 is the horizontal start of the line and must be <= x2.
WiredHome	72:ecffe56af969	1415	/// @param[in] y1 is the vertical start of the line and must be <= y2.
WiredHome	72:ecffe56af969	1416	/// @param[in] x2 is the horizontal end of the line and must be >= x1.
WiredHome	72:ecffe56af969	1417	/// @param[in] y2 is the vertical end of the line and must be >= y1.
WiredHome	72:ecffe56af969	1418	/// @param[in] radius1 defines the horizontal radius of the curved corner. Take care
WiredHome	21:3c1efb192927	1419	/// that this value < 1/2 the width of the rectangle, or bad_parameter
WiredHome	21:3c1efb192927	1420	/// is returned.
WiredHome	72:ecffe56af969	1421	/// @param[in] radius2 defines the vertical radius of the curved corner. Take care
WiredHome	21:3c1efb192927	1422	/// that this value < 1/2 the height of the rectangle, or bad_parameter
WiredHome	21:3c1efb192927	1423	/// is returned.
WiredHome	72:ecffe56af969	1424	/// @param[in] color defines the foreground color.
WiredHome	72:ecffe56af969	1425	/// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome	19:3f82c1161fd2	1426	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1427	///
WiredHome	37:f19b7e7449dc	1428	RetCode_t fillroundrect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome	37:f19b7e7449dc	1429	dim_t radius1, dim_t radius2, color_t color, fill_t fillit = FILL);
WiredHome	19:3f82c1161fd2	1430
WiredHome	19:3f82c1161fd2	1431	/// Draw a rectangle with rounded corners using the specified color.
WiredHome	19:3f82c1161fd2	1432	///
WiredHome	21:3c1efb192927	1433	/// This draws a rounded rectangle. A numbers of checks are made on the values,
WiredHome	21:3c1efb192927	1434	/// and it could reduce this to drawing a line (if either x1 == x2, or y1 == y2),
WiredHome	21:3c1efb192927	1435	/// or a single point (x1 == x2 && y1 == y2). If the radius parameters are
WiredHome	21:3c1efb192927	1436	/// > 1/2 the length of that side (width or height), an error value is returned.
WiredHome	21:3c1efb192927	1437	///
WiredHome	19:3f82c1161fd2	1438	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1439	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1440	///
WiredHome	72:ecffe56af969	1441	/// @param[in] x1 is the horizontal start of the line and must be <= x2.
WiredHome	72:ecffe56af969	1442	/// @param[in] y1 is the vertical start of the line and must be <= y2.
WiredHome	72:ecffe56af969	1443	/// @param[in] x2 is the horizontal end of the line and must be >= x1.
WiredHome	72:ecffe56af969	1444	/// @param[in] y2 is the vertical end of the line and must be >= y1.
WiredHome	72:ecffe56af969	1445	/// @param[in] radius1 defines the horizontal radius of the curved corner. Take care
WiredHome	21:3c1efb192927	1446	/// that this value < 1/2 the width of the rectangle, or bad_parameter
WiredHome	21:3c1efb192927	1447	/// is returned.
WiredHome	72:ecffe56af969	1448	/// @param[in] radius2 defines the vertical radius of the curved corner. Take care
WiredHome	21:3c1efb192927	1449	/// that this value < 1/2 the height of the rectangle, or bad_parameter
WiredHome	21:3c1efb192927	1450	/// is returned.
WiredHome	72:ecffe56af969	1451	/// @param[in] color defines the foreground color.
WiredHome	72:ecffe56af969	1452	/// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome	19:3f82c1161fd2	1453	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1454	///
WiredHome	37:f19b7e7449dc	1455	RetCode_t roundrect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome	37:f19b7e7449dc	1456	dim_t radius1, dim_t radius2, color_t color, fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1457
WiredHome	19:3f82c1161fd2	1458	/// Draw a rectangle with rounded corners.
WiredHome	19:3f82c1161fd2	1459	///
WiredHome	21:3c1efb192927	1460	/// This draws a rounded rectangle. A numbers of checks are made on the values,
WiredHome	21:3c1efb192927	1461	/// and it could reduce this to drawing a line (if either x1 == x2, or y1 == y2),
WiredHome	21:3c1efb192927	1462	/// or a single point (x1 == x2 && y1 == y2). If the radius parameters are
WiredHome	21:3c1efb192927	1463	/// > 1/2 the length of that side (width or height), an error value is returned.
WiredHome	19:3f82c1161fd2	1464	///
WiredHome	72:ecffe56af969	1465	/// @param[in] x1 is the horizontal start of the line and must be <= x2.
WiredHome	72:ecffe56af969	1466	/// @param[in] y1 is the vertical start of the line and must be <= y2.
WiredHome	72:ecffe56af969	1467	/// @param[in] x2 is the horizontal end of the line and must be >= x1.
WiredHome	72:ecffe56af969	1468	/// @param[in] y2 is the vertical end of the line and must be >= y1.
WiredHome	72:ecffe56af969	1469	/// @param[in] radius1 defines the horizontal radius of the curved corner. Take care
WiredHome	21:3c1efb192927	1470	/// that this value < 1/2 the width of the rectangle, or bad_parameter
WiredHome	21:3c1efb192927	1471	/// is returned.
WiredHome	72:ecffe56af969	1472	/// @param[in] radius2 defines the vertical radius of the curved corner. Take care
WiredHome	21:3c1efb192927	1473	/// that this value < 1/2 the height of the rectangle, or bad_parameter
WiredHome	21:3c1efb192927	1474	/// is returned.
WiredHome	72:ecffe56af969	1475	/// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome	19:3f82c1161fd2	1476	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1477	///
WiredHome	37:f19b7e7449dc	1478	RetCode_t roundrect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome	37:f19b7e7449dc	1479	dim_t radius1, dim_t radius2, fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1480
WiredHome	19:3f82c1161fd2	1481	/// Draw a triangle in the specified color.
WiredHome	19:3f82c1161fd2	1482	///
WiredHome	19:3f82c1161fd2	1483	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1484	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1485	///
WiredHome	72:ecffe56af969	1486	/// @param[in] x1 is the horizontal for point 1.
WiredHome	72:ecffe56af969	1487	/// @param[in] y1 is the vertical for point 1.
WiredHome	72:ecffe56af969	1488	/// @param[in] x2 is the horizontal for point 2.
WiredHome	72:ecffe56af969	1489	/// @param[in] y2 is the vertical for point 2.
WiredHome	72:ecffe56af969	1490	/// @param[in] x3 is the horizontal for point 3.
WiredHome	72:ecffe56af969	1491	/// @param[in] y3 is the vertical for point 3.
WiredHome	72:ecffe56af969	1492	/// @param[in] color defines the foreground color.
WiredHome	72:ecffe56af969	1493	/// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome	19:3f82c1161fd2	1494	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1495	///
WiredHome	37:f19b7e7449dc	1496	RetCode_t triangle(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome	37:f19b7e7449dc	1497	loc_t x3, loc_t y3, color_t color, fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1498
WiredHome	19:3f82c1161fd2	1499	/// Draw a filled triangle in the specified color.
WiredHome	19:3f82c1161fd2	1500	///
WiredHome	19:3f82c1161fd2	1501	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1502	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1503	///
WiredHome	72:ecffe56af969	1504	/// @param[in] x1 is the horizontal for point 1.
WiredHome	72:ecffe56af969	1505	/// @param[in] y1 is the vertical for point 1.
WiredHome	72:ecffe56af969	1506	/// @param[in] x2 is the horizontal for point 2.
WiredHome	72:ecffe56af969	1507	/// @param[in] y2 is the vertical for point 2.
WiredHome	72:ecffe56af969	1508	/// @param[in] x3 is the horizontal for point 3.
WiredHome	72:ecffe56af969	1509	/// @param[in] y3 is the vertical for point 3.
WiredHome	72:ecffe56af969	1510	/// @param[in] color defines the foreground color.
WiredHome	72:ecffe56af969	1511	/// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome	19:3f82c1161fd2	1512	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1513	///
WiredHome	37:f19b7e7449dc	1514	RetCode_t filltriangle(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome	37:f19b7e7449dc	1515	loc_t x3, loc_t y3, color_t color, fill_t fillit = FILL);
WiredHome	19:3f82c1161fd2	1516
WiredHome	19:3f82c1161fd2	1517	/// Draw a triangle
WiredHome	19:3f82c1161fd2	1518	///
WiredHome	19:3f82c1161fd2	1519	/// Draws a triangle using the foreground color setting.
WiredHome	19:3f82c1161fd2	1520	///
WiredHome	72:ecffe56af969	1521	/// @param[in] x1 is the horizontal for point 1.
WiredHome	72:ecffe56af969	1522	/// @param[in] y1 is the vertical for point 1.
WiredHome	72:ecffe56af969	1523	/// @param[in] x2 is the horizontal for point 2.
WiredHome	72:ecffe56af969	1524	/// @param[in] y2 is the vertical for point 2.
WiredHome	72:ecffe56af969	1525	/// @param[in] x3 is the horizontal for point 3.
WiredHome	72:ecffe56af969	1526	/// @param[in] y3 is the vertical for point 3.
WiredHome	72:ecffe56af969	1527	/// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome	19:3f82c1161fd2	1528	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1529	///
WiredHome	37:f19b7e7449dc	1530	RetCode_t triangle(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome	37:f19b7e7449dc	1531	loc_t x3, loc_t y3, fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1532
WiredHome	83:7bad0068cca0	1533
WiredHome	83:7bad0068cca0	1534	/// Draw a circle using the specified color.
WiredHome	83:7bad0068cca0	1535	///
WiredHome	83:7bad0068cca0	1536	/// @note As a side effect, this changes the current
WiredHome	83:7bad0068cca0	1537	/// foreground color for subsequent operations.
WiredHome	83:7bad0068cca0	1538	///
WiredHome	83:7bad0068cca0	1539	/// @param[in] p defines the center of the circle.
WiredHome	83:7bad0068cca0	1540	/// @param[in] radius defines the size of the circle.
WiredHome	83:7bad0068cca0	1541	/// @param[in] color defines the foreground color.
WiredHome	83:7bad0068cca0	1542	/// @returns success/failure code. @see RetCode_t.
WiredHome	83:7bad0068cca0	1543	///
WiredHome	83:7bad0068cca0	1544	RetCode_t circle(point_t p, dim_t radius, color_t color, fill_t fillit = NOFILL);
WiredHome	83:7bad0068cca0	1545
WiredHome	83:7bad0068cca0	1546	/// Draw a filled circle using the specified color.
WiredHome	83:7bad0068cca0	1547	///
WiredHome	83:7bad0068cca0	1548	/// @note As a side effect, this changes the current
WiredHome	83:7bad0068cca0	1549	/// foreground color for subsequent operations.
WiredHome	83:7bad0068cca0	1550	///
WiredHome	83:7bad0068cca0	1551	/// @param[in] p defines the center of the circle.
WiredHome	83:7bad0068cca0	1552	/// @param[in] radius defines the size of the circle.
WiredHome	83:7bad0068cca0	1553	/// @param[in] color defines the foreground color.
WiredHome	83:7bad0068cca0	1554	/// @returns success/failure code. @see RetCode_t.
WiredHome	83:7bad0068cca0	1555	///
WiredHome	83:7bad0068cca0	1556	RetCode_t fillcircle(point_t p, dim_t radius, color_t color, fill_t fillit = FILL);
WiredHome	83:7bad0068cca0	1557
WiredHome	83:7bad0068cca0	1558	/// Draw a circle.
WiredHome	83:7bad0068cca0	1559	///
WiredHome	83:7bad0068cca0	1560	/// Draws a circle using the foreground color setting.
WiredHome	83:7bad0068cca0	1561	///
WiredHome	83:7bad0068cca0	1562	/// @param[in] p defines the center of the circle.
WiredHome	83:7bad0068cca0	1563	/// @param[in] radius defines the size of the circle.
WiredHome	83:7bad0068cca0	1564	/// @returns success/failure code. @see RetCode_t.
WiredHome	83:7bad0068cca0	1565	///
WiredHome	83:7bad0068cca0	1566	RetCode_t circle(point_t p, dim_t radius, fill_t fillit = NOFILL);
WiredHome	83:7bad0068cca0	1567
WiredHome	19:3f82c1161fd2	1568	/// Draw a circle using the specified color.
WiredHome	19:3f82c1161fd2	1569	///
WiredHome	19:3f82c1161fd2	1570	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1571	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1572	///
WiredHome	72:ecffe56af969	1573	/// @param[in] x is the horizontal center of the circle.
WiredHome	72:ecffe56af969	1574	/// @param[in] y is the vertical center of the circle.
WiredHome	72:ecffe56af969	1575	/// @param[in] radius defines the size of the circle.
WiredHome	72:ecffe56af969	1576	/// @param[in] color defines the foreground color.
WiredHome	19:3f82c1161fd2	1577	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1578	///
WiredHome	37:f19b7e7449dc	1579	RetCode_t circle(loc_t x, loc_t y, dim_t radius, color_t color, fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1580
WiredHome	19:3f82c1161fd2	1581	/// Draw a filled circle using the specified color.
WiredHome	19:3f82c1161fd2	1582	///
WiredHome	19:3f82c1161fd2	1583	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1584	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1585	///
WiredHome	72:ecffe56af969	1586	/// @param[in] x is the horizontal center of the circle.
WiredHome	72:ecffe56af969	1587	/// @param[in] y is the vertical center of the circle.
WiredHome	72:ecffe56af969	1588	/// @param[in] radius defines the size of the circle.
WiredHome	72:ecffe56af969	1589	/// @param[in] color defines the foreground color.
WiredHome	19:3f82c1161fd2	1590	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1591	///
WiredHome	37:f19b7e7449dc	1592	RetCode_t fillcircle(loc_t x, loc_t y, dim_t radius, color_t color, fill_t fillit = FILL);
WiredHome	19:3f82c1161fd2	1593
WiredHome	19:3f82c1161fd2	1594	/// Draw a circle.
WiredHome	19:3f82c1161fd2	1595	///
WiredHome	19:3f82c1161fd2	1596	/// Draws a circle using the foreground color setting.
WiredHome	19:3f82c1161fd2	1597	///
WiredHome	72:ecffe56af969	1598	/// @param[in] x is the horizontal center of the circle.
WiredHome	72:ecffe56af969	1599	/// @param[in] y is the vertical center of the circle.
WiredHome	72:ecffe56af969	1600	/// @param[in] radius defines the size of the circle.
WiredHome	19:3f82c1161fd2	1601	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1602	///
WiredHome	37:f19b7e7449dc	1603	RetCode_t circle(loc_t x, loc_t y, dim_t radius, fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1604
WiredHome	19:3f82c1161fd2	1605	/// Draw an Ellipse using the specified color
WiredHome	19:3f82c1161fd2	1606	///
WiredHome	19:3f82c1161fd2	1607	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1608	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1609	///
WiredHome	72:ecffe56af969	1610	/// @param[in] x is the horizontal center of the ellipse.
WiredHome	72:ecffe56af969	1611	/// @param[in] y is the vertical center of the ellipse.
WiredHome	72:ecffe56af969	1612	/// @param[in] radius1 defines the horizontal radius of the ellipse.
WiredHome	72:ecffe56af969	1613	/// @param[in] radius2 defines the vertical radius of the ellipse.
WiredHome	72:ecffe56af969	1614	/// @param[in] color defines the foreground color.
WiredHome	72:ecffe56af969	1615	/// @param[in] fillit defines whether the circle is filled or not.
WiredHome	19:3f82c1161fd2	1616	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1617	///
WiredHome	37:f19b7e7449dc	1618	RetCode_t ellipse(loc_t x, loc_t y, dim_t radius1, dim_t radius2,
WiredHome	19:3f82c1161fd2	1619	color_t color, fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1620
WiredHome	25:9556a3a9b7cc	1621	/// Draw a filled Ellipse using the specified color
WiredHome	25:9556a3a9b7cc	1622	///
WiredHome	25:9556a3a9b7cc	1623	/// @note As a side effect, this changes the current
WiredHome	25:9556a3a9b7cc	1624	/// foreground color for subsequent operations.
WiredHome	25:9556a3a9b7cc	1625	///
WiredHome	72:ecffe56af969	1626	/// @param[in] x is the horizontal center of the ellipse.
WiredHome	72:ecffe56af969	1627	/// @param[in] y is the vertical center of the ellipse.
WiredHome	72:ecffe56af969	1628	/// @param[in] radius1 defines the horizontal radius of the ellipse.
WiredHome	72:ecffe56af969	1629	/// @param[in] radius2 defines the vertical radius of the ellipse.
WiredHome	72:ecffe56af969	1630	/// @param[in] color defines the foreground color.
WiredHome	72:ecffe56af969	1631	/// @param[in] fillit defines whether the circle is filled or not.
WiredHome	25:9556a3a9b7cc	1632	/// @returns success/failure code. @see RetCode_t.
WiredHome	25:9556a3a9b7cc	1633	///
WiredHome	37:f19b7e7449dc	1634	RetCode_t fillellipse(loc_t x, loc_t y, dim_t radius1, dim_t radius2,
WiredHome	25:9556a3a9b7cc	1635	color_t color, fill_t fillit = FILL);
WiredHome	25:9556a3a9b7cc	1636
WiredHome	19:3f82c1161fd2	1637	/// Draw an Ellipse
WiredHome	19:3f82c1161fd2	1638	///
WiredHome	19:3f82c1161fd2	1639	/// Draws it using the foreground color setting.
WiredHome	19:3f82c1161fd2	1640	///
WiredHome	72:ecffe56af969	1641	/// @param[in] x is the horizontal center of the ellipse.
WiredHome	72:ecffe56af969	1642	/// @param[in] y is the vertical center of the ellipse.
WiredHome	72:ecffe56af969	1643	/// @param[in] radius1 defines the horizontal radius of the ellipse.
WiredHome	72:ecffe56af969	1644	/// @param[in] radius2 defines the vertical radius of the ellipse.
WiredHome	72:ecffe56af969	1645	/// @param[in] fillit defines whether the circle is filled or not.
WiredHome	19:3f82c1161fd2	1646	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1647	///
WiredHome	37:f19b7e7449dc	1648	RetCode_t ellipse(loc_t x, loc_t y, dim_t radius1, dim_t radius2, fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1649
WiredHome	19:3f82c1161fd2	1650	/// Control display power
WiredHome	19:3f82c1161fd2	1651	///
WiredHome	72:ecffe56af969	1652	/// @param[in] on when set to true will turn on the display, when false it is turned off.
WiredHome	19:3f82c1161fd2	1653	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1654	///
WiredHome	19:3f82c1161fd2	1655	RetCode_t Power(bool on);
WiredHome	19:3f82c1161fd2	1656
WiredHome	19:3f82c1161fd2	1657	/// Reset the display controller via the Software Reset interface.
WiredHome	19:3f82c1161fd2	1658	///
WiredHome	19:3f82c1161fd2	1659	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1660	///
WiredHome	19:3f82c1161fd2	1661	RetCode_t Reset(void);
WiredHome	19:3f82c1161fd2	1662
WiredHome	19:3f82c1161fd2	1663	/// Set backlight brightness.
WiredHome	19:3f82c1161fd2	1664	///
WiredHome	19:3f82c1161fd2	1665	/// When the built-in PWM is used to control the backlight, this
WiredHome	19:3f82c1161fd2	1666	/// API can be used to set the brightness.
WiredHome	19:3f82c1161fd2	1667	///
WiredHome	72:ecffe56af969	1668	/// @param[in] brightness ranges from 0 (off) to 255 (full on)
WiredHome	19:3f82c1161fd2	1669	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1670	///
WiredHome	19:3f82c1161fd2	1671	RetCode_t Backlight_u8(unsigned char brightness);
WiredHome	19:3f82c1161fd2	1672
WiredHome	86:e86b355940f4	1673	/// Get backlight brightness.
WiredHome	86:e86b355940f4	1674	///
WiredHome	86:e86b355940f4	1675	/// @returns backlight setting from 0 (off) to 255 (full on).
WiredHome	86:e86b355940f4	1676	///
WiredHome	86:e86b355940f4	1677	uint8_t GetBacklight_u8(void);
WiredHome	86:e86b355940f4	1678
WiredHome	19:3f82c1161fd2	1679	/// Set backlight brightness.
WiredHome	19:3f82c1161fd2	1680	///
WiredHome	19:3f82c1161fd2	1681	/// When the built-in PWM is used to control the backlight, this
WiredHome	19:3f82c1161fd2	1682	/// API can be used to set the brightness.
WiredHome	19:3f82c1161fd2	1683	///
WiredHome	72:ecffe56af969	1684	/// @param[in] brightness ranges from 0.0 (off) to 1.0 (full on)
WiredHome	19:3f82c1161fd2	1685	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1686	///
WiredHome	19:3f82c1161fd2	1687	RetCode_t Backlight(float brightness);
WiredHome	19:3f82c1161fd2	1688
WiredHome	86:e86b355940f4	1689	/// Get backlight brightness.
WiredHome	86:e86b355940f4	1690	///
WiredHome	86:e86b355940f4	1691	/// @returns backlight setting from 0 (off) to 1.0 (full on).
WiredHome	86:e86b355940f4	1692	///
WiredHome	86:e86b355940f4	1693	float GetBacklight(void);
WiredHome	86:e86b355940f4	1694
WiredHome	32:0e4f2ae512e2	1695	/// Select a bitmap font (provided by the user) for all subsequent text.
WiredHome	19:3f82c1161fd2	1696	///
WiredHome	19:3f82c1161fd2	1697	/// @note Tool to create the fonts is accessible from its creator
WiredHome	19:3f82c1161fd2	1698	/// available at http://www.mikroe.com.
WiredHome	19:3f82c1161fd2	1699	/// Change the data to an array of type char[].
WiredHome	19:3f82c1161fd2	1700	///
WiredHome	72:ecffe56af969	1701	/// @param[in] font is a pointer to a specially formed font array.
WiredHome	19:3f82c1161fd2	1702	/// This special font array has a 4-byte header, followed by
WiredHome	19:3f82c1161fd2	1703	/// the data:
WiredHome	19:3f82c1161fd2	1704	/// - the number of bytes per char
WiredHome	19:3f82c1161fd2	1705	/// - the vertical size in pixels for each character
WiredHome	19:3f82c1161fd2	1706	/// - the horizontal size in pixels for each character
WiredHome	19:3f82c1161fd2	1707	/// - the number of bytes per vertical line (width of the array)
WiredHome	19:3f82c1161fd2	1708	/// @returns error code.
WiredHome	19:3f82c1161fd2	1709	///
WiredHome	30:e0f2da88bdf6	1710	virtual RetCode_t set_font(const unsigned char * font = NULL);
WiredHome	19:3f82c1161fd2	1711
WiredHome	19:3f82c1161fd2	1712	/// Get the RGB value for a DOS color.
WiredHome	19:3f82c1161fd2	1713	///
WiredHome	72:ecffe56af969	1714	/// @param[in] i is the color, in the range 0 to 15;
WiredHome	19:3f82c1161fd2	1715	/// @returns the RGB color of the selected index, or 0
WiredHome	19:3f82c1161fd2	1716	/// if the index is out of bounds.
WiredHome	19:3f82c1161fd2	1717	///
WiredHome	19:3f82c1161fd2	1718	color_t DOSColor(int i);
WiredHome	19:3f82c1161fd2	1719
WiredHome	19:3f82c1161fd2	1720	/// Get the color name (string) for a DOS color.
WiredHome	19:3f82c1161fd2	1721	///
WiredHome	72:ecffe56af969	1722	/// @param[in] i is the color, in the range 0 to 15;
WiredHome	19:3f82c1161fd2	1723	/// @returns a pointer to a string with the color name,
WiredHome	19:3f82c1161fd2	1724	/// or NULL if the index is out of bounds.
WiredHome	19:3f82c1161fd2	1725	///
WiredHome	19:3f82c1161fd2	1726	const char * DOSColorNames(int i);
WiredHome	19:3f82c1161fd2	1727
WiredHome	55:dfbabef7003e	1728	/// Advanced method indicating the start of a graphics stream.
WiredHome	55:dfbabef7003e	1729	///
WiredHome	55:dfbabef7003e	1730	/// This is called prior to a stream of pixel data being sent.
WiredHome	55:dfbabef7003e	1731	/// This may cause register configuration changes in the derived
WiredHome	55:dfbabef7003e	1732	/// class in order to prepare the hardware to accept the streaming
WiredHome	55:dfbabef7003e	1733	/// data.
WiredHome	55:dfbabef7003e	1734	///
WiredHome	55:dfbabef7003e	1735	/// Following this command, a series of @see _putp() commands can
WiredHome	55:dfbabef7003e	1736	/// be used to send individual pixels to the screen.
WiredHome	55:dfbabef7003e	1737	///
WiredHome	55:dfbabef7003e	1738	/// To conclude the graphics stream, @see _EndGraphicsStream should
WiredHome	55:dfbabef7003e	1739	/// be callled.
WiredHome	55:dfbabef7003e	1740	///
WiredHome	55:dfbabef7003e	1741	/// @returns error code.
WiredHome	55:dfbabef7003e	1742	///
WiredHome	55:dfbabef7003e	1743	virtual RetCode_t _StartGraphicsStream(void);
WiredHome	55:dfbabef7003e	1744
WiredHome	55:dfbabef7003e	1745	/// Advanced method to put a single color pixel to the screen.
WiredHome	55:dfbabef7003e	1746	///
WiredHome	55:dfbabef7003e	1747	/// This method may be called as many times as necessary after
WiredHome	55:dfbabef7003e	1748	/// @see _StartGraphicsStream() is called, and it should be followed
WiredHome	55:dfbabef7003e	1749	/// by _EndGraphicsStream.
WiredHome	55:dfbabef7003e	1750	///
WiredHome	72:ecffe56af969	1751	/// @param[in] pixel is a color value to be put on the screen.
WiredHome	55:dfbabef7003e	1752	/// @returns error code.
WiredHome	55:dfbabef7003e	1753	///
WiredHome	55:dfbabef7003e	1754	virtual RetCode_t _putp(color_t pixel);
WiredHome	55:dfbabef7003e	1755
WiredHome	55:dfbabef7003e	1756	/// Advanced method indicating the end of a graphics stream.
WiredHome	55:dfbabef7003e	1757	///
WiredHome	55:dfbabef7003e	1758	/// This is called to conclude a stream of pixel data that was sent.
WiredHome	55:dfbabef7003e	1759	/// This may cause register configuration changes in the derived
WiredHome	55:dfbabef7003e	1760	/// class in order to stop the hardware from accept the streaming
WiredHome	55:dfbabef7003e	1761	/// data.
WiredHome	55:dfbabef7003e	1762	///
WiredHome	55:dfbabef7003e	1763	/// @returns error code.
WiredHome	55:dfbabef7003e	1764	///
WiredHome	55:dfbabef7003e	1765	virtual RetCode_t _EndGraphicsStream(void);
WiredHome	19:3f82c1161fd2	1766
WiredHome	57:bd53a9e165a1	1767	/// Set the SPI port frequency (in Hz).
WiredHome	57:bd53a9e165a1	1768	///
WiredHome	66:468a11f05580	1769	/// This uses the mbed SPI driver, and is therefore dependent on
WiredHome	66:468a11f05580	1770	/// its capabilities. The RA8875 can accept writes via SPI faster
WiredHome	66:468a11f05580	1771	/// than a read can be performed. The frequency set by this API
WiredHome	66:468a11f05580	1772	/// is for the SPI writes. It will automatically reduce the SPI
WiredHome	66:468a11f05580	1773	/// clock rate when a read is performed, and restore it for the
WiredHome	68:ab08efabfc88	1774	/// next write. Alternately, the 2nd parameters permits setting
WiredHome	68:ab08efabfc88	1775	/// the read speed rather than letting it compute it automatically.
WiredHome	57:bd53a9e165a1	1776	///
WiredHome	66:468a11f05580	1777	/// @note The primary effect of this is to recover more CPU cycles
WiredHome	66:468a11f05580	1778	/// for your application code. Keep in mind that when more than
WiredHome	66:468a11f05580	1779	/// one command is sent to the display controller, that it
WiredHome	66:468a11f05580	1780	/// will wait for the controller to finish the prior command.
WiredHome	66:468a11f05580	1781	/// In this case, the performance is limited by the RA8875.
WiredHome	57:bd53a9e165a1	1782	///
WiredHome	72:ecffe56af969	1783	/// @param[in] Hz is the frequency in Hz, tested range includes the
WiredHome	66:468a11f05580	1784	/// range from 1,000,000 (1MHz) to 10,000,000 (10 MHz). Values
WiredHome	66:468a11f05580	1785	/// outside this range will be accepted, but operation may
WiredHome	76:c981284eb513	1786	/// be unreliable. This depends partially on your hardware design
WiredHome	76:c981284eb513	1787	/// and the wires connecting the display module.
WiredHome	76:c981284eb513	1788	/// The default value is 5,000,000, which should work for most
WiredHome	76:c981284eb513	1789	/// applications as a starting point.
WiredHome	72:ecffe56af969	1790	/// @param[in] Hz2 is an optional parameter and will set the read
WiredHome	68:ab08efabfc88	1791	/// speed independently of the write speed.
WiredHome	57:bd53a9e165a1	1792	/// @returns success/failure code. @see RetCode_t.
WiredHome	57:bd53a9e165a1	1793	///
WiredHome	68:ab08efabfc88	1794	RetCode_t frequency(unsigned long Hz = RA8875_DEFAULT_SPI_FREQ, unsigned long Hz2 = 0);
WiredHome	57:bd53a9e165a1	1795
WiredHome	72:ecffe56af969	1796	/// This method captures the specified area as a 24-bit bitmap file.
WiredHome	72:ecffe56af969	1797	///
WiredHome	72:ecffe56af969	1798	/// Even though this is a 16-bit display, the stored image is in
WiredHome	72:ecffe56af969	1799	/// 24-bit format.
WiredHome	72:ecffe56af969	1800	///
WiredHome	73:f22a18707b5e	1801	/// This method will interrogate the current display setting and
WiredHome	73:f22a18707b5e	1802	/// create a bitmap based on those settings. For instance, if
WiredHome	73:f22a18707b5e	1803	/// only layer 1 is visible, then the bitmap is only layer 1. However,
WiredHome	73:f22a18707b5e	1804	/// if there is some other operation in effect (transparent mode).
WiredHome	73:f22a18707b5e	1805	///
WiredHome	72:ecffe56af969	1806	/// @param[in] x is the left edge of the region to capture
WiredHome	72:ecffe56af969	1807	/// @param[in] y is the top edge of the region to capture
WiredHome	72:ecffe56af969	1808	/// @param[in] w is the width of the region to capture
WiredHome	72:ecffe56af969	1809	/// @param[in] h is the height of the region to capture.
WiredHome	72:ecffe56af969	1810	/// @param[out] Name_BMP is the filename to write the image to.
WiredHome	72:ecffe56af969	1811	/// @return success or error code.
WiredHome	72:ecffe56af969	1812	///
WiredHome	72:ecffe56af969	1813	RetCode_t PrintScreen(loc_t x, loc_t y, dim_t w, dim_t h, const char *Name_BMP);
WiredHome	72:ecffe56af969	1814
WiredHome	72:ecffe56af969	1815	/// This method captures the specified area as a 24-bit bitmap file,
WiredHome	72:ecffe56af969	1816	/// including the option of layer selection.
WiredHome	72:ecffe56af969	1817	///
WiredHome	74:686faa218914	1818	/// @caution This method is deprecated as the alternate PrintScreen API
WiredHome	74:686faa218914	1819	/// automatically examines the display layer configuration.
WiredHome	74:686faa218914	1820	/// Therefore, calls to this API will ignore the layer parameter
WiredHome	74:686faa218914	1821	/// and automatically execute the other method.
WiredHome	74:686faa218914	1822	///
WiredHome	72:ecffe56af969	1823	/// Even though this is a 16-bit display, the stored image is in
WiredHome	72:ecffe56af969	1824	/// 24-bit format.
WiredHome	72:ecffe56af969	1825	///
WiredHome	72:ecffe56af969	1826	/// @param[in] layer is 0 or 1 to select the layer to extract.
WiredHome	72:ecffe56af969	1827	/// @param[in] x is the left edge of the region to capture
WiredHome	72:ecffe56af969	1828	/// @param[in] y is the top edge of the region to capture
WiredHome	72:ecffe56af969	1829	/// @param[in] w is the width of the region to capture
WiredHome	72:ecffe56af969	1830	/// @param[in] h is the height of the region to capture.
WiredHome	72:ecffe56af969	1831	/// @param[out] Name_BMP is the filename to write the image to.
WiredHome	72:ecffe56af969	1832	/// @return success or error code.
WiredHome	72:ecffe56af969	1833	///
WiredHome	72:ecffe56af969	1834	RetCode_t PrintScreen(uint16_t layer, loc_t x, loc_t y, dim_t w, dim_t h, const char *Name_BMP);
WiredHome	72:ecffe56af969	1835
WiredHome	57:bd53a9e165a1	1836
WiredHome	19:3f82c1161fd2	1837	#ifdef PERF_METRICS
WiredHome	19:3f82c1161fd2	1838	/// Clear the performance metrics to zero.
WiredHome	19:3f82c1161fd2	1839	void ClearPerformance();
WiredHome	19:3f82c1161fd2	1840
WiredHome	66:468a11f05580	1841	/// Count idle time.
WiredHome	66:468a11f05580	1842	///
WiredHome	72:ecffe56af969	1843	/// @param[in] t is the amount of idle time to accumulate.
WiredHome	66:468a11f05580	1844	///
WiredHome	66:468a11f05580	1845	void CountIdleTime(uint32_t t);
WiredHome	66:468a11f05580	1846
WiredHome	19:3f82c1161fd2	1847	/// Report the performance metrics for drawing functions using
WiredHome	41:2956a0a221e5	1848	/// the available serial channel.
WiredHome	41:2956a0a221e5	1849	///
WiredHome	72:ecffe56af969	1850	/// @param[in,out] pc is the serial channel to write to.
WiredHome	41:2956a0a221e5	1851	///
WiredHome	41:2956a0a221e5	1852	void ReportPerformance(Serial & pc);
WiredHome	19:3f82c1161fd2	1853	#endif
WiredHome	19:3f82c1161fd2	1854
hexley	54:e117ad10fba6	1855
WiredHome	19:3f82c1161fd2	1856	private:
hexley	54:e117ad10fba6	1857	/// Touch Panel register name definitions
WiredHome	77:9206c13aa527	1858	#define TPCR0 0x70
WiredHome	77:9206c13aa527	1859	#define TPCR1 0x71
WiredHome	77:9206c13aa527	1860	#define TPXH 0x72
WiredHome	77:9206c13aa527	1861	#define TPYH 0x73
WiredHome	77:9206c13aa527	1862	#define TPXYL 0x74
WiredHome	77:9206c13aa527	1863	#define INTC1 0xF0
WiredHome	77:9206c13aa527	1864	#define INTC2 0xF1
hexley	54:e117ad10fba6	1865
hexley	54:e117ad10fba6	1866	/// Specify the default settings for the Touch Panel, where different from the chip defaults
WiredHome	77:9206c13aa527	1867	#define TP_MODE_DEFAULT TP_MODE_AUTO
WiredHome	77:9206c13aa527	1868	#define TP_DEBOUNCE_DEFAULT TP_DEBOUNCE_ON
WiredHome	77:9206c13aa527	1869	#define TP_ADC_CLKDIV_DEFAULT TP_ADC_CLKDIV_8
hexley	54:e117ad10fba6	1870
WiredHome	77:9206c13aa527	1871	#define TP_ADC_SAMPLE_DEFAULT_CLKS TP_ADC_SAMPLE_8192_CLKS
hexley	54:e117ad10fba6	1872
hexley	54:e117ad10fba6	1873	/// Other Touch Panel params
WiredHome	77:9206c13aa527	1874	#define TPBUFSIZE 16 // Depth of the averaging buffers for x and y data
hexley	54:e117ad10fba6	1875
WiredHome	83:7bad0068cca0	1876	// Needs both a ticker and a timer. (could have created a timer from the ticker, but this is easier).
WiredHome	83:7bad0068cca0	1877	// on a touch, the timer is reset.
WiredHome	83:7bad0068cca0	1878	// the ticker monitors the timer to see if it has been a long time since
WiredHome	83:7bad0068cca0	1879	// a touch, and if so, it then clears the sample counter so it doesn't get partial old
WiredHome	83:7bad0068cca0	1880	// and partial new.
WiredHome	83:7bad0068cca0	1881
WiredHome	83:7bad0068cca0	1882	/// Touch State used by TouchPanelReadable. @see TouchCode_t.
WiredHome	83:7bad0068cca0	1883	TouchCode_t touchState;
WiredHome	83:7bad0068cca0	1884
WiredHome	83:7bad0068cca0	1885	/// Touch Panel ticker
WiredHome	83:7bad0068cca0	1886	Ticker touchTicker;
WiredHome	83:7bad0068cca0	1887
WiredHome	83:7bad0068cca0	1888	/// Touch Panel timer
WiredHome	83:7bad0068cca0	1889	Timer touchTimer;
WiredHome	83:7bad0068cca0	1890
WiredHome	83:7bad0068cca0	1891	/// keeps track of which sample we're collecting to filter out the noise.
WiredHome	83:7bad0068cca0	1892	int touchSample;
WiredHome	83:7bad0068cca0	1893
WiredHome	83:7bad0068cca0	1894	/// Private function for touch ticker callback.
WiredHome	83:7bad0068cca0	1895	void _TouchTicker(void);
WiredHome	83:7bad0068cca0	1896
WiredHome	77:9206c13aa527	1897	/// Touch Panel calibration matrix.
WiredHome	77:9206c13aa527	1898	tpMatrix_t tpMatrix;
hexley	54:e117ad10fba6	1899
WiredHome	29:422616aa04bd	1900	/// Internal function to put a character using the built-in (internal) font engine
WiredHome	29:422616aa04bd	1901	///
WiredHome	72:ecffe56af969	1902	/// @param[in] is the character to put to the screen.
WiredHome	29:422616aa04bd	1903	/// @returns the character put.
WiredHome	29:422616aa04bd	1904	///
WiredHome	29:422616aa04bd	1905	int _internal_putc(int c);
WiredHome	29:422616aa04bd	1906
WiredHome	29:422616aa04bd	1907	/// Internal function to put a character using the external font engine
WiredHome	29:422616aa04bd	1908	///
WiredHome	72:ecffe56af969	1909	/// @param[in] is the character to put to the screen.
WiredHome	29:422616aa04bd	1910	/// @returns the character put.
WiredHome	29:422616aa04bd	1911	///
WiredHome	29:422616aa04bd	1912	int _external_putc(int c);
WiredHome	29:422616aa04bd	1913
WiredHome	19:3f82c1161fd2	1914	/// Select the peripheral to use it.
WiredHome	19:3f82c1161fd2	1915	///
WiredHome	72:ecffe56af969	1916	/// @param[in] chipsel when true will select the peripheral, and when false
WiredHome	19:3f82c1161fd2	1917	/// will deselect the chip. This is the logical selection, and
WiredHome	19:3f82c1161fd2	1918	/// the pin selection is the invert of this.
WiredHome	19:3f82c1161fd2	1919	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1920	///
WiredHome	79:544eb4964795	1921	RetCode_t _select(bool chipsel);
WiredHome	19:3f82c1161fd2	1922
WiredHome	66:468a11f05580	1923	/// Wait while the status register indicates the controller is busy.
WiredHome	66:468a11f05580	1924	///
WiredHome	72:ecffe56af969	1925	/// @param[in] mask is the mask of bits to monitor.
WiredHome	66:468a11f05580	1926	/// @returns true if a normal exit.
WiredHome	66:468a11f05580	1927	/// @returns false if a timeout exit.
WiredHome	66:468a11f05580	1928	///
WiredHome	66:468a11f05580	1929	bool _WaitWhileBusy(uint8_t mask);
WiredHome	66:468a11f05580	1930
WiredHome	66:468a11f05580	1931	/// Wait while the the register anded with the mask is true.
WiredHome	66:468a11f05580	1932	///
WiredHome	72:ecffe56af969	1933	/// @param[in] reg is the register to monitor
WiredHome	72:ecffe56af969	1934	/// @param[in] mask is the bit mask to monitor
WiredHome	66:468a11f05580	1935	/// @returns true if it was a normal exit
WiredHome	66:468a11f05580	1936	/// @returns false if it was a timeout that caused the exit.
WiredHome	66:468a11f05580	1937	///
WiredHome	66:468a11f05580	1938	bool _WaitWhileReg(uint8_t reg, uint8_t mask);
WiredHome	66:468a11f05580	1939
WiredHome	68:ab08efabfc88	1940	/// set the spi port to either the write or the read speed.
WiredHome	68:ab08efabfc88	1941	///
WiredHome	68:ab08efabfc88	1942	/// This is a private API used to toggle between the write
WiredHome	68:ab08efabfc88	1943	/// and the read speed for the SPI port to the RA8875, since
WiredHome	68:ab08efabfc88	1944	/// it can accept writes faster than reads.
WiredHome	68:ab08efabfc88	1945	///
WiredHome	72:ecffe56af969	1946	/// @param[in] writeSpeed when true selects the write frequency,
WiredHome	68:ab08efabfc88	1947	/// and when false it selects the read frequency.
WiredHome	68:ab08efabfc88	1948	///
WiredHome	68:ab08efabfc88	1949	void _setWriteSpeed(bool writeSpeed);
WiredHome	68:ab08efabfc88	1950
WiredHome	19:3f82c1161fd2	1951	/// The most primitive - to write a data value to the SPI interface.
WiredHome	19:3f82c1161fd2	1952	///
WiredHome	72:ecffe56af969	1953	/// @param[in] data is the value to write.
WiredHome	19:3f82c1161fd2	1954	/// @returns a value read from the port, since SPI is often shift
WiredHome	19:3f82c1161fd2	1955	/// in while shifting out.
WiredHome	19:3f82c1161fd2	1956	///
WiredHome	79:544eb4964795	1957	unsigned char _spiwrite(unsigned char data);
WiredHome	19:3f82c1161fd2	1958
WiredHome	19:3f82c1161fd2	1959	/// The most primitive - to read a data value to the SPI interface.
WiredHome	19:3f82c1161fd2	1960	///
WiredHome	19:3f82c1161fd2	1961	/// This is really just a specialcase of the write command, where
WiredHome	19:3f82c1161fd2	1962	/// the value zero is written in order to read.
WiredHome	19:3f82c1161fd2	1963	///
WiredHome	19:3f82c1161fd2	1964	/// @returns a value read from the port, since SPI is often shift
WiredHome	19:3f82c1161fd2	1965	/// in while shifting out.
WiredHome	19:3f82c1161fd2	1966	///
WiredHome	79:544eb4964795	1967	unsigned char _spiread();
WiredHome	19:3f82c1161fd2	1968
WiredHome	75:ca78388cfd77	1969	const uint8_t * pKeyMap;
WiredHome	75:ca78388cfd77	1970
WiredHome	19:3f82c1161fd2	1971	SPI spi; ///< spi port
WiredHome	68:ab08efabfc88	1972	bool spiWriteSpeed; ///< indicates if the current mode is write or read
WiredHome	68:ab08efabfc88	1973	unsigned long spiwritefreq; ///< saved write freq
WiredHome	66:468a11f05580	1974	unsigned long spireadfreq; ///< saved read freq
WiredHome	19:3f82c1161fd2	1975	DigitalOut cs; ///< chip select pin, assumed active low
WiredHome	19:3f82c1161fd2	1976	DigitalOut res; ///< reset pin, assumed active low
WiredHome	19:3f82c1161fd2	1977	const unsigned char * font; ///< reference to an external font somewhere in memory
WiredHome	37:f19b7e7449dc	1978	loc_t cursor_x, cursor_y; ///< used for external fonts only
WiredHome	19:3f82c1161fd2	1979
WiredHome	19:3f82c1161fd2	1980	#ifdef PERF_METRICS
WiredHome	19:3f82c1161fd2	1981	typedef enum
WiredHome	19:3f82c1161fd2	1982	{
WiredHome	19:3f82c1161fd2	1983	PRF_CLS,
WiredHome	41:2956a0a221e5	1984	PRF_DRAWPIXEL,
WiredHome	41:2956a0a221e5	1985	PRF_PIXELSTREAM,
WiredHome	41:2956a0a221e5	1986	PRF_READPIXEL,
WiredHome	41:2956a0a221e5	1987	PRF_READPIXELSTREAM,
WiredHome	19:3f82c1161fd2	1988	PRF_DRAWLINE,
WiredHome	19:3f82c1161fd2	1989	PRF_DRAWRECTANGLE,
WiredHome	19:3f82c1161fd2	1990	PRF_DRAWROUNDEDRECTANGLE,
WiredHome	19:3f82c1161fd2	1991	PRF_DRAWTRIANGLE,
WiredHome	19:3f82c1161fd2	1992	PRF_DRAWCIRCLE,
WiredHome	19:3f82c1161fd2	1993	PRF_DRAWELLIPSE,
WiredHome	19:3f82c1161fd2	1994	METRICCOUNT
WiredHome	19:3f82c1161fd2	1995	} method_e;
WiredHome	19:3f82c1161fd2	1996	unsigned long metrics[METRICCOUNT];
WiredHome	75:ca78388cfd77	1997	unsigned long idletime_usec;
WiredHome	19:3f82c1161fd2	1998	void RegisterPerformance(method_e method);
WiredHome	19:3f82c1161fd2	1999	Timer performance;
WiredHome	19:3f82c1161fd2	2000	#endif
WiredHome	19:3f82c1161fd2	2001	};
WiredHome	19:3f82c1161fd2	2002
WiredHome	19:3f82c1161fd2	2003	//} // namespace
WiredHome	19:3f82c1161fd2	2004
WiredHome	19:3f82c1161fd2	2005	//using namespace SW_graphics;
WiredHome	19:3f82c1161fd2	2006
WiredHome	23:a50ded45dbaf	2007
WiredHome	23:a50ded45dbaf	2008	#ifdef TESTENABLE
WiredHome	23:a50ded45dbaf	2009	// ______________ ______________ ______________ _______________
WiredHome	23:a50ded45dbaf	2010	// /_____ _____/ / ___________/ / ___________/ /_____ ______/
WiredHome	23:a50ded45dbaf	2011	// / / / / / / / /
WiredHome	23:a50ded45dbaf	2012	// / / / /___ / /__________ / /
WiredHome	23:a50ded45dbaf	2013	// / / / ____/ /__________ / / /
WiredHome	23:a50ded45dbaf	2014	// / / / / / / / /
WiredHome	23:a50ded45dbaf	2015	// / / / /__________ ___________/ / / /
WiredHome	23:a50ded45dbaf	2016	// /__/ /_____________/ /_____________/ /__/
WiredHome	23:a50ded45dbaf	2017
WiredHome	23:a50ded45dbaf	2018	#include "WebColors.h"
WiredHome	23:a50ded45dbaf	2019	#include <algorithm>
WiredHome	23:a50ded45dbaf	2020
WiredHome	23:a50ded45dbaf	2021	extern "C" void mbed_reset();
WiredHome	23:a50ded45dbaf	2022
WiredHome	23:a50ded45dbaf	2023	/// This activates a small set of tests for the graphics library.
WiredHome	23:a50ded45dbaf	2024	///
WiredHome	23:a50ded45dbaf	2025	/// Call this API and pass it the reference to the display class.
WiredHome	23:a50ded45dbaf	2026	/// It will then run a series of tests. It accepts interaction via
WiredHome	23:a50ded45dbaf	2027	/// stdin to switch from automatic test mode to manual, run a specific
WiredHome	23:a50ded45dbaf	2028	/// test, or to exit the test mode.
WiredHome	23:a50ded45dbaf	2029	///
WiredHome	72:ecffe56af969	2030	/// @param[in] lcd is a reference to the display class.
WiredHome	72:ecffe56af969	2031	/// @param[in] pc is a reference to a serial interface, typically the USB to PC.
WiredHome	23:a50ded45dbaf	2032	///
WiredHome	23:a50ded45dbaf	2033	void RunTestSet(RA8875 & lcd, Serial & pc);
WiredHome	23:a50ded45dbaf	2034
WiredHome	23:a50ded45dbaf	2035
WiredHome	23:a50ded45dbaf	2036	// To enable the test code, uncomment this section, or copy the
WiredHome	23:a50ded45dbaf	2037	// necessary pieces to your "main()".
WiredHome	23:a50ded45dbaf	2038	//
WiredHome	23:a50ded45dbaf	2039	// #include "mbed.h"
WiredHome	23:a50ded45dbaf	2040	// #include "RA8875.h"
WiredHome	23:a50ded45dbaf	2041	// RA8875 lcd(p5, p6, p7, p12, NC, "tft"); // MOSI, MISO, SCK, /ChipSelect, /reset, name
WiredHome	23:a50ded45dbaf	2042	// Serial pc(USBTX, USBRX);
WiredHome	23:a50ded45dbaf	2043	// extern "C" void mbed_reset();
WiredHome	23:a50ded45dbaf	2044	// int main()
WiredHome	23:a50ded45dbaf	2045	// {
WiredHome	23:a50ded45dbaf	2046	// pc.baud(460800); // I like a snappy terminal, so crank it up!
WiredHome	23:a50ded45dbaf	2047	// pc.printf("\r\nRA8875 Test - Build " __DATE__ " " __TIME__ "\r\n");
WiredHome	23:a50ded45dbaf	2048	//
WiredHome	23:a50ded45dbaf	2049	// pc.printf("Turning on display\r\n");
WiredHome	23:a50ded45dbaf	2050	// lcd.Reset();
WiredHome	23:a50ded45dbaf	2051	// lcd.Power(true); // display power is on, but the backlight is independent
WiredHome	23:a50ded45dbaf	2052	// lcd.Backlight(0.5);
WiredHome	23:a50ded45dbaf	2053	// RunTestSet(lcd, pc);
WiredHome	23:a50ded45dbaf	2054	// }
WiredHome	23:a50ded45dbaf	2055
WiredHome	23:a50ded45dbaf	2056	#endif // TESTENABLE
WiredHome	23:a50ded45dbaf	2057
WiredHome	56:7a85d226ad0d	2058	#endif

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	19 Mar 2017
Imports:	0
Forks:	0
Commits:	119
Dependents:	2
Dependencies:	1
Followers:	1

RA8875.h@88:bfddef6ec836, 2015-01-19 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning