Guillermo Stedile
Forked para SNOCC
Diff: RA8875.h
- Revision:
- 81:01da2e34283d
- Parent:
- 79:544eb4964795
- Child:
- 82:f7d300f26540
--- a/RA8875.h Sun Dec 28 19:58:18 2014 +0000
+++ b/RA8875.h Sun Dec 28 21:50:28 2014 +0000
@@ -25,6 +25,7 @@
///
/// @code
/// RA8875 lcd(p5, p6, p7, p12, NC, "tft");
+/// lcd.init();
/// lcd.foreground(Blue);
/// lcd.line(0,0, 479,271);
/// ...
@@ -76,7 +77,7 @@
#define Cyan (color_t)(RGB(0,187,187))
#define Red (color_t)(RGB(187,0,0))
#define Magenta (color_t)(RGB(187,0,187))
-#define Brown (color_t)(RGB(187,187,0))
+#define Brown (color_t)(RGB(63,63,0))
#define Gray (color_t)(RGB(187,187,187))
#define Charcoal (color_t)(RGB(85,85,85))
#define BrightBlue (color_t)(RGB(0,0,255))
@@ -85,7 +86,7 @@
#define BrightRed (color_t)(RGB(255,0,0))
#define Orange (color_t)(RGB(255,85,85))
#define Pink (color_t)(RGB(255,85,255))
-#define Yellow (color_t)(RGB(255,255,85))
+#define Yellow (color_t)(RGB(187,187,0))
#define White (color_t)(RGB(255,255,255))
#define DarkBlue (color_t)(RGB(0,0,63))
@@ -121,7 +122,7 @@
///
/// int main()
/// {
-/// lcd.init(480,272,16);
+/// lcd.init();
/// lcd.printf("printing 3 x 2 = %d", 3*2);
/// lcd.circle( 400,25, 25, BrightRed);
/// lcd.fillcircle( 400,25, 15, RGB(128,255,128));
@@ -224,7 +225,7 @@
///
/// int main()
/// {
- /// lcd.init(true,255,480,272,16); // powerup, backlight full, w x h x c
+ /// lcd.init();
/// lcd.printf("printing 3 x 2 = %d", 3*2);
/// lcd.circle(400,25, 25, BrightRed);
/// }
@@ -249,15 +250,24 @@
/// Initialize the driver.
///
+ /// @param[in] width in pixels to configure the display for. This parameter is optional
+ /// and the default is 480.
+ /// @param[in] height in pixels to configure the display for. This parameter is optional
+ /// and the default is 272.
+ /// @param[in] color_bpp can be either 8 or 16, but must be consistent
+ /// with the width and height parameters. This parameter is optional
+ /// and the default is 16.
/// @param[in] power defines if the display should be left in the power-on or off state.
- /// If power is true (on), the backlight is set to 100%.
- /// @param[in] width in pixels to configure the display for.
- /// @param[in] height in pixels to configure the display for.
- /// @param[in] color_bpp can be either 8 or 16, but must be consistent
- /// with the width and height parameters.
+ /// If power is true (on), the backlight is set to 100%. This parameter is optional
+ /// and the default is true (on). @see Power.
+ /// @param[in] keypadon defines if the keypad support should be enabled. This parameter is optional
+ /// and the default is true (enabled). @see KeypadInit.
+ /// @param[in] touchscreeenon defines if the keypad support should be enabled. This parameter is optional
+ /// and the default is true (enabled). @see TouchPanelInit.
/// @returns success/failure code. @see RetCode_t.
///
- RetCode_t init(bool poweron, int width, int height, int color_bpp);
+ RetCode_t init(int width = 480, int height = 272, int color_bpp = 16,
+ bool poweron = true, bool keypadon = true, bool touchscreeenon = true);
/// Get a pointer to the error code.
///
@@ -442,7 +452,7 @@
/// @note The returned values are not in display (pixel) units but are in analog to
/// digital converter units.
///
- /// @note This API is usually not needed. @see TouchPanelCalibrate.
+ /// @note This API is usually not needed. @see TouchPanelComputeCalibration.
/// @see TouchPanelReadable.
///
/// @param[out] x is the x scale a/d value.
@@ -460,7 +470,7 @@
/// @note The returned values are not in display (pixel) units but are in analog to
/// digital converter units.
///
- /// @note This API is usually not needed. @see TouchPanelCalibrate.
+ /// @note This API is usually not needed. @see TouchPanelComputeCalibration.
/// @see TouchPanelReadable.
///
/// @param[out] x is the x scale a/d value.
@@ -479,7 +489,7 @@
/// matrix on the next power cycle. By doing so, it can avoid the
/// need to calibrate on every power cycle.
///
- /// @note The methods "TouchPanelCalibrate", "TouchPanelReadable", and
+ /// @note The methods "TouchPanelComputeCalibration", "TouchPanelReadable", and
/// indirectly the "TouchPanelSetMatrix" methods are all derived
/// from a program by Carlos E. Vidales. See the copyright note
/// for further details. See also the article
@@ -513,7 +523,40 @@
/// non-volatile memory to recover the calibration after a power fail.
/// @returns success/failure code. @see RetCode_t.
///
- RetCode_t TouchPanelCalibrate(point_t display[3], point_t screen[3], tpMatrix_t * matrix);
+ RetCode_t TouchPanelComputeCalibration(point_t display[3], point_t screen[3], tpMatrix_t * matrix);
+
+
+ /// Perform the touch panel calibration process.
+ ///
+ /// This method provides the easy "shortcut" to calibrating the touch panel.
+ /// The process will automatically generate the calibration points, present
+ /// the targets on-screen, detect the touches, compute the calibration
+ /// matrix, and optionally provide the calibration matrix to the calling code
+ /// for persistence in non-volatile memory.
+ ///
+ /// @param[out] matrix is an optional parameter to hold the calibration matrix
+ /// as a result of the calibration. This can be saved in
+ /// non-volatile memory to recover the calibration after a power fail.
+ /// @returns success/failure code. @see RetCode_t.
+ ///
+ RetCode_t TouchPanelCalibrate(tpMatrix_t * matrix);
+
+ /// Perform the touch panel calibration process.
+ ///
+ /// This method provides the easy "shortcut" to calibrating the touch panel.
+ /// The process will automatically generate the calibration points, present
+ /// the targets on-screen, detect the touches, compute the calibration
+ /// matrix, and optionally provide the calibration matrix to the calling code
+ /// for persistence in non-volatile memory.
+ ///
+ /// @param[in] msg is a text message to present on the screen during the
+ /// calibration process.
+ /// @param[out] matrix is an optional parameter to hold the calibration matrix
+ /// as a result of the calibration. This can be saved in
+ /// non-volatile memory to recover the calibration after a power fail.
+ /// @returns success/failure code. @see RetCode_t.
+ ///
+ RetCode_t TouchPanelCalibrate(const char * msg, tpMatrix_t * matrix = NULL);
/// Get the screen calibrated point of touch.
///
@@ -568,7 +611,7 @@
/// Set the calibration matrix for the touch panel.
///
/// This method is used to set the calibration matrix for the touch panel. After
- /// performing the calibration (@see TouchPanelCalibrate), the matrix can be stored.
+ /// performing the calibration (@see TouchPanelComputeCalibration), the matrix can be stored.
/// On a subsequence power cycle, the matrix may be restored from non-volatile and
/// passed in to this method. It will then be held to perform the corrections when
/// reading the touch panel point.
@@ -1166,12 +1209,36 @@
/// @note As a side effect, this changes the current
/// foreground color for subsequent operations.
///
+ /// @param[in] rect defines the rectangle.
+ /// @param[in] color defines the foreground color.
+ /// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
+ /// @returns success/failure code. @see RetCode_t.
+ ///
+ RetCode_t rect(rect_t rect, color_t color, fill_t fillit);
+
+ /// Draw a filled rectangle in the specified color
+ ///
+ /// @note As a side effect, this changes the current
+ /// foreground color for subsequent operations.
+ ///
+ /// @param[in] rect defines the rectangle.
+ /// @param[in] color defines the foreground color.
+ /// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
+ /// @returns success/failure code. @see RetCode_t.
+ ///
+ RetCode_t fillrect(rect_t rect, color_t color, fill_t fillit = FILL);
+
+ /// Draw a rectangle in the specified color
+ ///
+ /// @note As a side effect, this changes the current
+ /// foreground color for subsequent operations.
+ ///
/// @param[in] x1 is the horizontal start of the line.
/// @param[in] y1 is the vertical start of the line.
/// @param[in] x2 is the horizontal end of the line.
/// @param[in] y2 is the vertical end of the line.
/// @param[in] color defines the foreground color.
- /// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
+ /// @param[in] fillit is optional to FILL the rectangle. default is FILL.
/// @returns success/failure code. @see RetCode_t.
///
RetCode_t rect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,