RA8875 - Forked para SNOCC

Users » gstedile » Code » RA8875

Guillermo Stedile / RA8875

Forked para SNOCC

Dependencies: GPS

Dependents: SNOCC_V1 SNOCC_V2

Fork of RA8875 by SNOCC

RA8875.h@102:fc60bfa0199f, 2016-01-23 (annotated)

Committer:: WiredHome
Date:: Sat Jan 23 16:58:54 2016 +0000
Revision:: 102:fc60bfa0199f
Parent:: 101:e0aad446094a
Child:: 103:7e0464ca6c5c

Small change to the color and the on-screen sample.

Who changed what in which revision?

User	Revision	Line number	New contents of line
WiredHome	78:faf49c381591	1	///
WiredHome	78:faf49c381591	2	/// @mainpage RA8875 Display Controller Driver library
WiredHome	78:faf49c381591	3	///
WiredHome	78:faf49c381591	4	/// The RA8875 Display controller is a powerful interface for low cost displays. It
WiredHome	78:faf49c381591	5	/// can support displays up to 800 x 600 pixels x 16-bit color. Another common
WiredHome	78:faf49c381591	6	/// implementation is 480 x 272 x 16 with two layers. The two layers can be
WiredHome	78:faf49c381591	7	/// exchanged, or blended in various ways (transparency, OR, AND, and more).
WiredHome	78:faf49c381591	8	/// It includes graphics acceleration capabilities for drawing primitives,
WiredHome	78:faf49c381591	9	/// such as line, rectangle, circles, and more.
WiredHome	78:faf49c381591	10	///
WiredHome	101:e0aad446094a	11	/// It is not a display for super-fast animations, video, picture frames and so forth,
WiredHome	101:e0aad446094a	12	/// at least when using the SPI ports. Performance has not been evaluated with one
WiredHome	101:e0aad446094a	13	/// of the parallel port options.
WiredHome	101:e0aad446094a	14	///
WiredHome	78:faf49c381591	15	/// The controller additionally supports backlight control (via PWM), keypad scanning
WiredHome	101:e0aad446094a	16	/// (for a 4 x 5 matrix) and resistive touch-panel support. Others have provides
WiredHome	101:e0aad446094a	17	/// support for a capacitive touch screen.
WiredHome	78:faf49c381591	18	///
WiredHome	78:faf49c381591	19	/// @section Display_Config Display Configuration
WiredHome	78:faf49c381591	20	///
WiredHome	78:faf49c381591	21	/// This section details basics for bringing the display online. At a minimum,
WiredHome	78:faf49c381591	22	/// the display is instantiated. After that any of the available commands
WiredHome	78:faf49c381591	23	/// may be issued.
WiredHome	78:faf49c381591	24	///
WiredHome	78:faf49c381591	25	/// During the instantiation, the display is powered on, cleared, and the backlight
WiredHome	78:faf49c381591	26	/// is energized. Additionally, the keypad and touchscreen features are activated.
WiredHome	78:faf49c381591	27	/// It is important to keep in mind that the keypad had the default mapping, and
WiredHome	78:faf49c381591	28	/// the touchscreen does not have the calibration matrix configured, so additional
WiredHome	78:faf49c381591	29	/// steps may be necessary.
WiredHome	78:faf49c381591	30	///
WiredHome	78:faf49c381591	31	/// @code
WiredHome	78:faf49c381591	32	/// RA8875 lcd(p5, p6, p7, p12, NC, "tft");
WiredHome	81:01da2e34283d	33	/// lcd.init();
WiredHome	78:faf49c381591	34	/// lcd.foreground(Blue);
WiredHome	78:faf49c381591	35	/// lcd.line(0,0, 479,271);
WiredHome	78:faf49c381591	36	/// ...
WiredHome	78:faf49c381591	37	/// @endcode
WiredHome	78:faf49c381591	38	///
WiredHome	78:faf49c381591	39	/// @section Touch_Panel Touch Panel
WiredHome	78:faf49c381591	40	///
WiredHome	78:faf49c381591	41	/// The supported touch panel interface is for a resistive panel, and is natively
WiredHome	78:faf49c381591	42	/// supported by the RA8875 controller. There are a few steps to enable this interface.
WiredHome	78:faf49c381591	43	///
WiredHome	78:faf49c381591	44	/// @subsection Touch_Panel_Enable Touch Panel Enable
WiredHome	78:faf49c381591	45	///
WiredHome	78:faf49c381591	46	/// @see TouchPanelInit has two forms - fully automatic, and controlled. See the APIs for
WiredHome	78:faf49c381591	47	/// details.
WiredHome	78:faf49c381591	48	///
WiredHome	78:faf49c381591	49	/// @subsection Touch_Panel_Calibration
WiredHome	78:faf49c381591	50	///
WiredHome	78:faf49c381591	51	/// The touch panel is not initially calibrated on startup. The application should
WiredHome	78:faf49c381591	52	/// provide a means to activate the calibration process, and that should not require
WiredHome	78:faf49c381591	53	/// the touchscreen as it may not yet be usable. Alternately, a calibration matrix
WiredHome	78:faf49c381591	54	/// can be loaded from non-volatile and installed.
WiredHome	78:faf49c381591	55	///
WiredHome	78:faf49c381591	56	/// @section Keypad Keypad
WiredHome	78:faf49c381591	57	///
WiredHome	78:faf49c381591	58	/// The keypad has a default keypad mapping, but there is an API that permits
WiredHome	78:faf49c381591	59	/// installing a custom keymap.
WiredHome	78:faf49c381591	60	///
WiredHome	101:e0aad446094a	61	/// @todo Add APIs for the 2nd PWM channel, which might be quite useful as a simple
WiredHome	101:e0aad446094a	62	/// beeper.
WiredHome	101:e0aad446094a	63	/// @todo Figure out how to "init()" in the constructor. I ran into some issues if
WiredHome	101:e0aad446094a	64	/// the display was instantiated before main(), and the code would not run,
WiredHome	101:e0aad446094a	65	/// thus the exposure and activation of the init() function. If the constructor
WiredHome	101:e0aad446094a	66	/// was within main(), then it seemed to work as expected.
WiredHome	101:e0aad446094a	67	///
WiredHome	19:3f82c1161fd2	68	#ifndef RA8875_H
WiredHome	19:3f82c1161fd2	69	#define RA8875_H
WiredHome	19:3f82c1161fd2	70	#include <mbed.h>
WiredHome	19:3f82c1161fd2	71
WiredHome	77:9206c13aa527	72	#include "RA8875_Regs.h"
WiredHome	19:3f82c1161fd2	73	#include "GraphicsDisplay.h"
WiredHome	19:3f82c1161fd2	74
WiredHome	41:2956a0a221e5	75	#define RA8875_DEFAULT_SPI_FREQ 5000000
WiredHome	19:3f82c1161fd2	76
WiredHome	19:3f82c1161fd2	77	// Define this to enable code that monitors the performance of various
WiredHome	19:3f82c1161fd2	78	// graphics commands.
WiredHome	78:faf49c381591	79	//#define PERF_METRICS
WiredHome	19:3f82c1161fd2	80
WiredHome	23:a50ded45dbaf	81	// What better place for some test code than in here and the companion
WiredHome	23:a50ded45dbaf	82	// .cpp file. See also the bottom of this file.
WiredHome	99:66edf771373a	83	//#define TESTENABLE
WiredHome	19:3f82c1161fd2	84
WiredHome	19:3f82c1161fd2	85	/// DOS colors - slightly color enhanced
WiredHome	20:6e2e4a8372eb	86	#define Black (color_t)(RGB(0,0,0))
WiredHome	20:6e2e4a8372eb	87	#define Blue (color_t)(RGB(0,0,187))
WiredHome	20:6e2e4a8372eb	88	#define Green (color_t)(RGB(0,187,0))
WiredHome	20:6e2e4a8372eb	89	#define Cyan (color_t)(RGB(0,187,187))
WiredHome	20:6e2e4a8372eb	90	#define Red (color_t)(RGB(187,0,0))
WiredHome	20:6e2e4a8372eb	91	#define Magenta (color_t)(RGB(187,0,187))
WiredHome	81:01da2e34283d	92	#define Brown (color_t)(RGB(63,63,0))
WiredHome	20:6e2e4a8372eb	93	#define Gray (color_t)(RGB(187,187,187))
WiredHome	20:6e2e4a8372eb	94	#define Charcoal (color_t)(RGB(85,85,85))
WiredHome	62:ba5d33438fda	95	#define BrightBlue (color_t)(RGB(0,0,255))
WiredHome	62:ba5d33438fda	96	#define BrightGreen (color_t)(RGB(0,255,0))
WiredHome	62:ba5d33438fda	97	#define BrightCyan (color_t)(RGB(0,255,255))
WiredHome	62:ba5d33438fda	98	#define BrightRed (color_t)(RGB(255,0,0))
WiredHome	20:6e2e4a8372eb	99	#define Orange (color_t)(RGB(255,85,85))
WiredHome	20:6e2e4a8372eb	100	#define Pink (color_t)(RGB(255,85,255))
WiredHome	81:01da2e34283d	101	#define Yellow (color_t)(RGB(187,187,0))
WiredHome	20:6e2e4a8372eb	102	#define White (color_t)(RGB(255,255,255))
WiredHome	20:6e2e4a8372eb	103
WiredHome	62:ba5d33438fda	104	#define DarkBlue (color_t)(RGB(0,0,63))
WiredHome	62:ba5d33438fda	105	#define DarkGreen (color_t)(RGB(0,63,0))
WiredHome	62:ba5d33438fda	106	#define DarkCyan (color_t)(RGB(0,63,63))
WiredHome	62:ba5d33438fda	107	#define DarkRed (color_t)(RGB(63,0,0))
WiredHome	62:ba5d33438fda	108	#define DarkMagenta (color_t)(RGB(63,0,63))
WiredHome	62:ba5d33438fda	109	#define DarkBrown (color_t)(RGB(63,63,0))
WiredHome	62:ba5d33438fda	110	#define DarkGray (color_t)(RGB(63,63,63))
WiredHome	61:8f3153bf0baa	111
WiredHome	82:f7d300f26540	112	#define min(a,b) ((a<b)?a:b)
WiredHome	82:f7d300f26540	113	#define max(a,b) ((a>b)?a:b)
WiredHome	82:f7d300f26540	114
WiredHome	19:3f82c1161fd2	115
WiredHome	19:3f82c1161fd2	116	//namespace SW_graphics
WiredHome	19:3f82c1161fd2	117	//{
WiredHome	19:3f82c1161fd2	118
WiredHome	96:40b74dd3695b	119	class FPointerDummy; // used by the callback methods.
WiredHome	24:8ca861acf12d	120
WiredHome	21:3c1efb192927	121	/// This is a graphics library for the Raio RA8875 Display Controller chip
WiredHome	21:3c1efb192927	122	/// attached to a 4-wire SPI interface.
WiredHome	21:3c1efb192927	123	///
WiredHome	56:7a85d226ad0d	124	/// It offers both primitive and high level APIs.
WiredHome	56:7a85d226ad0d	125	///
WiredHome	21:3c1efb192927	126	/// Central to this API is a coordinate system, where the origin (0,0) is in
WiredHome	56:7a85d226ad0d	127	/// the top-left corner of the display, and the width (x) extends positive to the
WiredHome	56:7a85d226ad0d	128	/// right and the height (y) extends positive toward the bottom.
WiredHome	21:3c1efb192927	129	///
WiredHome	56:7a85d226ad0d	130	/// @caution As there are both graphics and text commands, one must take care to use
WiredHome	21:3c1efb192927	131	/// the proper coordinate system for each. Some of the text APIs are in units
WiredHome	29:422616aa04bd	132	/// of column and row, which is measured in character positions (and dependent
WiredHome	56:7a85d226ad0d	133	/// on the font size), where other text APIs permit pixel level positioning.
WiredHome	56:7a85d226ad0d	134	///
WiredHome	56:7a85d226ad0d	135	/// @code
WiredHome	56:7a85d226ad0d	136	/// #include "RA8875.h"
WiredHome	56:7a85d226ad0d	137	/// RA8875 lcd(p5, p6, p7, p12, NC, "tft");
WiredHome	56:7a85d226ad0d	138	///
WiredHome	56:7a85d226ad0d	139	/// int main()
WiredHome	56:7a85d226ad0d	140	/// {
WiredHome	81:01da2e34283d	141	/// lcd.init();
WiredHome	56:7a85d226ad0d	142	/// lcd.printf("printing 3 x 2 = %d", 3*2);
WiredHome	56:7a85d226ad0d	143	/// lcd.circle( 400,25, 25, BrightRed);
WiredHome	56:7a85d226ad0d	144	/// lcd.fillcircle( 400,25, 15, RGB(128,255,128));
WiredHome	56:7a85d226ad0d	145	/// lcd.ellipse( 440,75, 35,20, BrightBlue);
WiredHome	56:7a85d226ad0d	146	/// lcd.fillellipse( 440,75, 25,10, Blue);
WiredHome	56:7a85d226ad0d	147	/// lcd.triangle( 440,100, 475,110, 450,125, Magenta);
WiredHome	56:7a85d226ad0d	148	/// lcd.filltriangle( 445,105, 467,111, 452,120, Cyan);
WiredHome	56:7a85d226ad0d	149	/// lcd.rect( 400,130, 475,155, Brown);
WiredHome	56:7a85d226ad0d	150	/// lcd.fillrect( 405,135, 470,150, Pink);
WiredHome	56:7a85d226ad0d	151	/// lcd.roundrect( 410,160, 475,190, 10,8, Yellow);
WiredHome	56:7a85d226ad0d	152	/// lcd.fillroundrect(415,165, 470,185, 5,3, Orange);
WiredHome	56:7a85d226ad0d	153	/// lcd.line( 430,200, 460,230, RGB(0,255,0));
WiredHome	56:7a85d226ad0d	154	/// for (int i=0; i<=30; i+=5)
WiredHome	56:7a85d226ad0d	155	/// lcd.pixel(435+i,200+i, White);
WiredHome	56:7a85d226ad0d	156	/// }
WiredHome	56:7a85d226ad0d	157	/// @endcode
WiredHome	29:422616aa04bd	158	///
WiredHome	31:c72e12cd5c67	159	/// @todo Add Scroll support for text.
WiredHome	37:f19b7e7449dc	160	/// @todo Improve sync between internal and external font support - cursor, window, scroll.
WiredHome	75:ca78388cfd77	161	/// @todo Add Hardware reset signal - but testing to date indicates it is not needed.
WiredHome	44:207594dece70	162	/// @todo Add high level objects - x-y graph, meter, others... but these will
WiredHome	44:207594dece70	163	/// probably be best served in another class, since they may not
WiredHome	44:207594dece70	164	/// be needed for many uses.
WiredHome	21:3c1efb192927	165	///
WiredHome	19:3f82c1161fd2	166	class RA8875 : public GraphicsDisplay
WiredHome	19:3f82c1161fd2	167	{
WiredHome	19:3f82c1161fd2	168	public:
WiredHome	53:86d24b9480b9	169	/// cursor type to be shown as the text cursor.
WiredHome	53:86d24b9480b9	170	typedef enum
WiredHome	53:86d24b9480b9	171	{
WiredHome	53:86d24b9480b9	172	NOCURSOR, ///< cursor is hidden
WiredHome	53:86d24b9480b9	173	IBEAM, ///< \| cursor
WiredHome	53:86d24b9480b9	174	UNDER, ///< _ cursor
WiredHome	53:86d24b9480b9	175	BLOCK ///< Block cursor
WiredHome	53:86d24b9480b9	176	} cursor_t;
WiredHome	53:86d24b9480b9	177
WiredHome	19:3f82c1161fd2	178	/// font type selection.
WiredHome	19:3f82c1161fd2	179	typedef enum
WiredHome	19:3f82c1161fd2	180	{
WiredHome	31:c72e12cd5c67	181	ISO8859_1, ///< ISO8859-1 font
WiredHome	31:c72e12cd5c67	182	ISO8859_2, ///< ISO8859-2 font
WiredHome	31:c72e12cd5c67	183	ISO8859_3, ///< ISO8859-3 font
WiredHome	31:c72e12cd5c67	184	ISO8859_4 ///< ISO8859-4 font
WiredHome	19:3f82c1161fd2	185	} font_t;
WiredHome	19:3f82c1161fd2	186
WiredHome	84:e102021864b5	187	/// display orientation
WiredHome	19:3f82c1161fd2	188	typedef enum
WiredHome	19:3f82c1161fd2	189	{
WiredHome	84:e102021864b5	190	normal, ///< normal (landscape) orientation
WiredHome	84:e102021864b5	191	rotate_0 = normal, ///< alternate to 'normal'
WiredHome	84:e102021864b5	192	rotate_90, ///< rotated clockwise 90 degree
WiredHome	84:e102021864b5	193	rotate_180, ///< rotated (clockwise) 180 degree
WiredHome	84:e102021864b5	194	rotate_270, ///< rotated clockwise 270 degree
WiredHome	84:e102021864b5	195	} orientation_t;
WiredHome	19:3f82c1161fd2	196
WiredHome	19:3f82c1161fd2	197	/// alignment
WiredHome	19:3f82c1161fd2	198	typedef enum
WiredHome	19:3f82c1161fd2	199	{
WiredHome	31:c72e12cd5c67	200	align_none, ///< align - none
WiredHome	31:c72e12cd5c67	201	align_full ///< align - full
WiredHome	19:3f82c1161fd2	202	} alignment_t;
WiredHome	19:3f82c1161fd2	203
WiredHome	19:3f82c1161fd2	204	/// Scale factor - 1, 2, 3 4
WiredHome	40:04aa280dfa39	205	typedef int HorizontalScale;
WiredHome	19:3f82c1161fd2	206
WiredHome	19:3f82c1161fd2	207	/// Scale factor - 1, 2, 3, 4
WiredHome	40:04aa280dfa39	208	typedef int VerticalScale;
WiredHome	19:3f82c1161fd2	209
WiredHome	19:3f82c1161fd2	210	/// Clear screen region
WiredHome	19:3f82c1161fd2	211	typedef enum
WiredHome	19:3f82c1161fd2	212	{
WiredHome	31:c72e12cd5c67	213	FULLWINDOW, ///< Full screen
WiredHome	31:c72e12cd5c67	214	ACTIVEWINDOW ///< active window/region
WiredHome	19:3f82c1161fd2	215	} Region_t;
WiredHome	19:3f82c1161fd2	216
WiredHome	61:8f3153bf0baa	217	/// Set the Layer Display Mode. @ref SetLayerMode
WiredHome	53:86d24b9480b9	218	typedef enum
WiredHome	53:86d24b9480b9	219	{
WiredHome	61:8f3153bf0baa	220	ShowLayer0, ///< Only layer 0 is visible, layer 1 is hidden (default)
WiredHome	56:7a85d226ad0d	221	ShowLayer1, ///< Only layer 1 is visible, layer 0 is hidden
WiredHome	53:86d24b9480b9	222	LightenOverlay, ///< Lighten-overlay mode
WiredHome	53:86d24b9480b9	223	TransparentMode, ///< Transparent mode
WiredHome	53:86d24b9480b9	224	BooleanOR, ///< Boolean OR mode
WiredHome	53:86d24b9480b9	225	BooleanAND, ///< Boolean AND mode
WiredHome	53:86d24b9480b9	226	FloatingWindow ///< Floating Window mode
WiredHome	53:86d24b9480b9	227	} LayerMode_T;
WiredHome	53:86d24b9480b9	228
hexley	54:e117ad10fba6	229	/// Touch Panel modes
hexley	54:e117ad10fba6	230	typedef enum
hexley	54:e117ad10fba6	231	{
hexley	54:e117ad10fba6	232	TP_Auto, ///< Auto touch detection mode
hexley	54:e117ad10fba6	233	TP_Manual, ///< Manual touch detection mode
hexley	54:e117ad10fba6	234	} tpmode_t;
WiredHome	96:40b74dd3695b	235
WiredHome	96:40b74dd3695b	236	/// printscreen callback commands
WiredHome	96:40b74dd3695b	237	typedef enum
WiredHome	96:40b74dd3695b	238	{
WiredHome	96:40b74dd3695b	239	OPEN, ///< command to open the file. cast uint32_t * to the buffer to get the total size to be written.
WiredHome	96:40b74dd3695b	240	WRITE, ///< command to write some data, buffer points to the data and the size is in bytes.
WiredHome	96:40b74dd3695b	241	CLOSE, ///< command to close the file
WiredHome	96:40b74dd3695b	242	} filecmd_t;
WiredHome	96:40b74dd3695b	243
WiredHome	96:40b74dd3695b	244	/// print screen callback
WiredHome	96:40b74dd3695b	245	///
WiredHome	96:40b74dd3695b	246	/// The special form of the print screen will pass one blob at a time
WiredHome	96:40b74dd3695b	247	/// to the callback. There are basic command declaring that the stream
WiredHome	96:40b74dd3695b	248	/// can be opened, a block written, and the stream closed. There is
WiredHome	96:40b74dd3695b	249	/// also a command to communicate the total size being delivered.
WiredHome	96:40b74dd3695b	250	///
WiredHome	96:40b74dd3695b	251	/// @code
WiredHome	96:40b74dd3695b	252	/// lcd.PrintScreen(x,y,w,h,callback);
WiredHome	96:40b74dd3695b	253	/// ...
WiredHome	96:40b74dd3695b	254	/// void callback(filecmd_t cmd, uint8_t * buffer, uint16_t size) {
WiredHome	96:40b74dd3695b	255	/// switch(cmd) {
WiredHome	96:40b74dd3695b	256	/// case OPEN:
WiredHome	96:40b74dd3695b	257	/// pc.printf("About to write %u bytes\r\n", (uint32_t )buffer);
WiredHome	96:40b74dd3695b	258	/// fh = fopen("file.bmp", "w+b");
WiredHome	96:40b74dd3695b	259	/// break;
WiredHome	96:40b74dd3695b	260	/// case WRITE:
WiredHome	96:40b74dd3695b	261	/// fwrite(buffer, size, fh);
WiredHome	96:40b74dd3695b	262	/// break;
WiredHome	96:40b74dd3695b	263	/// case CLOSE:
WiredHome	96:40b74dd3695b	264	/// fclose(fh);
WiredHome	96:40b74dd3695b	265	/// break;
WiredHome	96:40b74dd3695b	266	/// default:
WiredHome	96:40b74dd3695b	267	/// pc.printf("Unexpected callback %d\r\n", cmd);
WiredHome	96:40b74dd3695b	268	/// break;
WiredHome	96:40b74dd3695b	269	/// }
WiredHome	96:40b74dd3695b	270	/// }
WiredHome	96:40b74dd3695b	271	/// @endcode
WiredHome	96:40b74dd3695b	272	///
WiredHome	96:40b74dd3695b	273	/// @param cmd is the command to execute. @see filecmd_t.
WiredHome	96:40b74dd3695b	274	/// @param buffer is a pointer to the buffer being passed.
WiredHome	96:40b74dd3695b	275	/// @param size is the number of bytes in the buffer.
WiredHome	96:40b74dd3695b	276	///
WiredHome	96:40b74dd3695b	277	typedef RetCode_t (* PrintCallback_T)(filecmd_t cmd, uint8_t * buffer, uint16_t size);
hexley	54:e117ad10fba6	278
WiredHome	19:3f82c1161fd2	279	/// Constructor for a display based on the RAiO RA8875
WiredHome	19:3f82c1161fd2	280	/// display controller.
WiredHome	19:3f82c1161fd2	281	///
WiredHome	61:8f3153bf0baa	282	/// This configures the registers and calls the @ref init method.
WiredHome	61:8f3153bf0baa	283	///
WiredHome	56:7a85d226ad0d	284	/// @code
WiredHome	56:7a85d226ad0d	285	/// #include "RA8875.h"
WiredHome	56:7a85d226ad0d	286	/// RA8875 lcd(p5, p6, p7, p12, NC, "tft");
WiredHome	56:7a85d226ad0d	287	///
WiredHome	56:7a85d226ad0d	288	/// int main()
WiredHome	56:7a85d226ad0d	289	/// {
WiredHome	81:01da2e34283d	290	/// lcd.init();
WiredHome	56:7a85d226ad0d	291	/// lcd.printf("printing 3 x 2 = %d", 3*2);
WiredHome	56:7a85d226ad0d	292	/// lcd.circle(400,25, 25, BrightRed);
WiredHome	56:7a85d226ad0d	293	/// }
WiredHome	56:7a85d226ad0d	294	/// @endcode
WiredHome	56:7a85d226ad0d	295	///
WiredHome	72:ecffe56af969	296	/// @param[in] mosi is the SPI master out slave in pin on the mbed.
WiredHome	72:ecffe56af969	297	/// @param[in] miso is the SPI master in slave out pin on the mbed.
WiredHome	72:ecffe56af969	298	/// @param[in] sclk is the SPI shift clock pin on the mbed.
WiredHome	72:ecffe56af969	299	/// @param[in] csel is the DigitalOut pin on the mbed to use as the
WiredHome	19:3f82c1161fd2	300	/// active low chip select for the display controller.
WiredHome	72:ecffe56af969	301	/// @param[in] reset is the DigitalOut pin on the mbed to use as the
WiredHome	19:3f82c1161fd2	302	/// active low reset input on the display controller -
WiredHome	19:3f82c1161fd2	303	/// but this is not currently used.
WiredHome	72:ecffe56af969	304	/// @param[in] name is a text name for this object, which will permit
WiredHome	72:ecffe56af969	305	/// capturing stdout to puts() and printf() directly to it.
WiredHome	19:3f82c1161fd2	306	///
WiredHome	19:3f82c1161fd2	307	RA8875(PinName mosi, PinName miso, PinName sclk, PinName csel, PinName reset, const char * name = "lcd");
WiredHome	19:3f82c1161fd2	308
WiredHome	45:679c2fb8480c	309	// Destructor doesn't have much to do as this would typically be created
WiredHome	45:679c2fb8480c	310	// at startup, and not at runtime.
WiredHome	19:3f82c1161fd2	311	//~RA8875();
WiredHome	19:3f82c1161fd2	312
WiredHome	79:544eb4964795	313	/// Initialize the driver.
WiredHome	79:544eb4964795	314	///
WiredHome	81:01da2e34283d	315	/// @param[in] width in pixels to configure the display for. This parameter is optional
WiredHome	81:01da2e34283d	316	/// and the default is 480.
WiredHome	81:01da2e34283d	317	/// @param[in] height in pixels to configure the display for. This parameter is optional
WiredHome	81:01da2e34283d	318	/// and the default is 272.
WiredHome	81:01da2e34283d	319	/// @param[in] color_bpp can be either 8 or 16, but must be consistent
WiredHome	81:01da2e34283d	320	/// with the width and height parameters. This parameter is optional
WiredHome	81:01da2e34283d	321	/// and the default is 16.
WiredHome	79:544eb4964795	322	/// @param[in] power defines if the display should be left in the power-on or off state.
WiredHome	81:01da2e34283d	323	/// If power is true (on), the backlight is set to 100%. This parameter is optional
WiredHome	81:01da2e34283d	324	/// and the default is true (on). @see Power.
WiredHome	81:01da2e34283d	325	/// @param[in] keypadon defines if the keypad support should be enabled. This parameter is optional
WiredHome	81:01da2e34283d	326	/// and the default is true (enabled). @see KeypadInit.
WiredHome	81:01da2e34283d	327	/// @param[in] touchscreeenon defines if the keypad support should be enabled. This parameter is optional
WiredHome	81:01da2e34283d	328	/// and the default is true (enabled). @see TouchPanelInit.
WiredHome	79:544eb4964795	329	/// @returns success/failure code. @see RetCode_t.
WiredHome	79:544eb4964795	330	///
WiredHome	81:01da2e34283d	331	RetCode_t init(int width = 480, int height = 272, int color_bpp = 16,
WiredHome	81:01da2e34283d	332	bool poweron = true, bool keypadon = true, bool touchscreeenon = true);
WiredHome	79:544eb4964795	333
WiredHome	79:544eb4964795	334	/// Get a pointer to the error code.
WiredHome	79:544eb4964795	335	///
WiredHome	79:544eb4964795	336	/// This method returns a pointer to a text string that matches the
WiredHome	79:544eb4964795	337	/// code. @see RetCode_t.
WiredHome	79:544eb4964795	338	///
WiredHome	79:544eb4964795	339	/// @param[in] code is the return value from RetCode_t to look up.
WiredHome	79:544eb4964795	340	/// @returns a pointer to the text message representing code. If code
WiredHome	79:544eb4964795	341	/// is not a valid value, then it returns the text for bad_parameter;
WiredHome	79:544eb4964795	342	const char * GetErrorMessage(RetCode_t code);
WiredHome	79:544eb4964795	343
WiredHome	79:544eb4964795	344
WiredHome	50:2c4f474a2453	345	/// Select the drawing layer for subsequent commands.
WiredHome	43:3becae133285	346	///
WiredHome	43:3becae133285	347	/// If the screen configuration is 480 x 272, or if it is 800 x 480
WiredHome	43:3becae133285	348	/// and 8-bit color, the the display supports two layers, which can
WiredHome	43:3becae133285	349	/// be independently drawn on and shown. Additionally, complex
WiredHome	43:3becae133285	350	/// operations involving both layers are permitted.
WiredHome	43:3becae133285	351	///
WiredHome	56:7a85d226ad0d	352	/// @code
WiredHome	56:7a85d226ad0d	353	/// //lcd.SetLayerMode(OnlyLayer0); // default is layer 0
WiredHome	56:7a85d226ad0d	354	/// lcd.rect(400,130, 475,155,Brown);
WiredHome	56:7a85d226ad0d	355	/// lcd.SelectDrawingLayer(1);
WiredHome	56:7a85d226ad0d	356	/// lcd.circle(400,25, 25, BrightRed);
WiredHome	56:7a85d226ad0d	357	/// wait(1);
WiredHome	56:7a85d226ad0d	358	/// lcd.SetLayerMode(ShowLayer1);
WiredHome	56:7a85d226ad0d	359	/// @endcode
WiredHome	56:7a85d226ad0d	360	///
WiredHome	61:8f3153bf0baa	361	/// @attention The user manual refers to Layer 1 and Layer 2, however the
WiredHome	61:8f3153bf0baa	362	/// actual register values are value 0 and 1. This API as well as
WiredHome	61:8f3153bf0baa	363	/// others that reference the layers use the values 0 and 1 for
WiredHome	61:8f3153bf0baa	364	/// cleaner iteration in the code.
WiredHome	43:3becae133285	365	///
WiredHome	72:ecffe56af969	366	/// @param[in] layer is 0 or 1 to select the layer for subsequent
WiredHome	61:8f3153bf0baa	367	/// commands.
WiredHome	43:3becae133285	368	/// @returns success/failure code. @see RetCode_t.
WiredHome	43:3becae133285	369	///
WiredHome	50:2c4f474a2453	370	RetCode_t SelectDrawingLayer(uint16_t layer);
WiredHome	43:3becae133285	371
WiredHome	61:8f3153bf0baa	372	/// Get the currently active drawing layer.
WiredHome	61:8f3153bf0baa	373	///
WiredHome	61:8f3153bf0baa	374	/// This returns a value, 0 or 1, based on the screen configuration
WiredHome	61:8f3153bf0baa	375	/// and the currently active drawing layer.
WiredHome	61:8f3153bf0baa	376	///
WiredHome	61:8f3153bf0baa	377	/// @code
WiredHome	61:8f3153bf0baa	378	/// uint16_t prevLayer = lcd.GetDrawingLayer();
WiredHome	61:8f3153bf0baa	379	/// lcd.SelectDrawingLayer(x);
WiredHome	61:8f3153bf0baa	380	/// lcd.circle(400,25, 25, BrightRed);
WiredHome	61:8f3153bf0baa	381	/// lcd.SelectDrawingLayer(prevLayer);
WiredHome	61:8f3153bf0baa	382	/// @endcode
WiredHome	61:8f3153bf0baa	383	///
WiredHome	61:8f3153bf0baa	384	/// @attention The user manual refers to Layer 1 and Layer 2, however the
WiredHome	61:8f3153bf0baa	385	/// actual register values are value 0 and 1. This API as well as
WiredHome	61:8f3153bf0baa	386	/// others that reference the layers use the values 0 and 1 for
WiredHome	61:8f3153bf0baa	387	/// cleaner iteration in the code.
WiredHome	61:8f3153bf0baa	388	///
WiredHome	61:8f3153bf0baa	389	/// @returns the current drawing layer; 0 or 1.
WiredHome	61:8f3153bf0baa	390	///
WiredHome	61:8f3153bf0baa	391	uint16_t GetDrawingLayer(void);
WiredHome	61:8f3153bf0baa	392
WiredHome	44:207594dece70	393	/// Set the Layer presentation mode.
WiredHome	44:207594dece70	394	///
WiredHome	44:207594dece70	395	/// This sets the presentation mode for layers, and permits showing
WiredHome	44:207594dece70	396	/// a single layer, or applying a mode where the two layers
WiredHome	44:207594dece70	397	/// are combined using one of the hardware methods.
WiredHome	44:207594dece70	398	///
WiredHome	61:8f3153bf0baa	399	/// Refer to the RA8875 data sheet for full details.
WiredHome	61:8f3153bf0baa	400	///
WiredHome	56:7a85d226ad0d	401	/// @code
WiredHome	56:7a85d226ad0d	402	/// //lcd.SetLayerMode(OnlyLayer0); // default is layer 0
WiredHome	56:7a85d226ad0d	403	/// lcd.rect(400,130, 475,155,Brown);
WiredHome	56:7a85d226ad0d	404	/// lcd.SelectDrawingLayer(1);
WiredHome	56:7a85d226ad0d	405	/// lcd.circle(400,25, 25, BrightRed);
WiredHome	56:7a85d226ad0d	406	/// wait(1);
WiredHome	56:7a85d226ad0d	407	/// lcd.SetLayerMode(ShowLayer1);
WiredHome	56:7a85d226ad0d	408	/// @endcode
WiredHome	56:7a85d226ad0d	409	///
WiredHome	72:ecffe56af969	410	/// @param[in] mode sets the mode in the Layer Transparency Register.
WiredHome	44:207594dece70	411	/// @returns success/failure code. @see RetCode_t.
WiredHome	44:207594dece70	412	///
WiredHome	53:86d24b9480b9	413	RetCode_t SetLayerMode(LayerMode_T mode);
WiredHome	44:207594dece70	414
WiredHome	82:f7d300f26540	415	/// Get the Layer presentation mode.
WiredHome	82:f7d300f26540	416	///
WiredHome	82:f7d300f26540	417	/// This gets the current layer mode. @see LayerMode_T.
WiredHome	82:f7d300f26540	418	///
WiredHome	82:f7d300f26540	419	/// @returns layer mode.
WiredHome	82:f7d300f26540	420	///
WiredHome	82:f7d300f26540	421	LayerMode_T GetLayerMode(void);
WiredHome	82:f7d300f26540	422
WiredHome	44:207594dece70	423	/// Set the layer transparency for each layer.
WiredHome	44:207594dece70	424	///
WiredHome	44:207594dece70	425	/// Set the transparency, where the range of values is
WiredHome	44:207594dece70	426	/// from zero (fully visible) to eight (fully transparent).
WiredHome	44:207594dece70	427	/// The input value is automatically limited to this range.
WiredHome	44:207594dece70	428	///
WiredHome	56:7a85d226ad0d	429	/// @code
WiredHome	56:7a85d226ad0d	430	/// // draw something on each layer, then step-fade across
WiredHome	56:7a85d226ad0d	431	/// display.SetLayerMode(RA8875::TransparentMode);
WiredHome	56:7a85d226ad0d	432	/// for (i=0; i<=8; i++) {
WiredHome	56:7a85d226ad0d	433	/// display.SetLayerTransparency(i, 8-i);
WiredHome	56:7a85d226ad0d	434	/// wait_ms(200);
WiredHome	56:7a85d226ad0d	435	/// }
WiredHome	56:7a85d226ad0d	436	/// @endcode
WiredHome	56:7a85d226ad0d	437	///
WiredHome	72:ecffe56af969	438	/// @param[in] layer1 sets the layer 1 transparency.
WiredHome	72:ecffe56af969	439	/// @param[in] layer2 sets the layer 2 transparency.
WiredHome	44:207594dece70	440	/// @returns success/failure code. @see RetCode_t.
WiredHome	44:207594dece70	441	///
WiredHome	44:207594dece70	442	RetCode_t SetLayerTransparency(uint8_t layer1, uint8_t layer2);
WiredHome	44:207594dece70	443
WiredHome	53:86d24b9480b9	444	/// Set the background color register used for transparency.
WiredHome	53:86d24b9480b9	445	///
WiredHome	53:86d24b9480b9	446	/// This command sets the background color registers that are used
WiredHome	53:86d24b9480b9	447	/// in the transparent color operations involving the layers.
WiredHome	53:86d24b9480b9	448	///
WiredHome	72:ecffe56af969	449	/// @param[in] color is optional and expressed in 16-bit format. If not
WiredHome	53:86d24b9480b9	450	/// supplied, a default of Black is used.
WiredHome	53:86d24b9480b9	451	/// @returns success/failure code. @see RetCode_t.
WiredHome	53:86d24b9480b9	452	///
WiredHome	53:86d24b9480b9	453	RetCode_t SetBackgroundTransparencyColor(color_t color = RGB(0,0,0));
hexley	54:e117ad10fba6	454
WiredHome	73:f22a18707b5e	455
WiredHome	73:f22a18707b5e	456	/// Get the background color value used for transparency.
WiredHome	73:f22a18707b5e	457	///
WiredHome	73:f22a18707b5e	458	/// This command reads the background color registers that define
WiredHome	73:f22a18707b5e	459	/// the transparency color for operations involving layers.
WiredHome	73:f22a18707b5e	460	///
WiredHome	73:f22a18707b5e	461	/// @returns the color.
WiredHome	73:f22a18707b5e	462	///
WiredHome	73:f22a18707b5e	463	color_t GetBackgroundTransparencyColor(void);
WiredHome	73:f22a18707b5e	464
hexley	54:e117ad10fba6	465	/// Initialize theTouch Panel controller with default values
hexley	54:e117ad10fba6	466	///
WiredHome	78:faf49c381591	467	/// This activates the simplified touch panel init, which may work for
WiredHome	78:faf49c381591	468	/// most uses. The alternate API is available if fine-grained control
WiredHome	78:faf49c381591	469	/// is needed for the numerous settings.
WiredHome	78:faf49c381591	470	///
WiredHome	56:7a85d226ad0d	471	/// @returns success/failure code. @see RetCode_t.
WiredHome	56:7a85d226ad0d	472	///
hexley	54:e117ad10fba6	473	RetCode_t TouchPanelInit(void);
hexley	54:e117ad10fba6	474
hexley	54:e117ad10fba6	475	/// Initialize the Touch Panel controller with detailed settings.
hexley	54:e117ad10fba6	476	///
WiredHome	78:faf49c381591	477	/// This is the detailed touch panel init, which provides the ability
WiredHome	78:faf49c381591	478	/// to set nearly every possible option.
WiredHome	78:faf49c381591	479	///
hexley	54:e117ad10fba6	480	/// @param[in] bTpEnable Touch Panel enable/disable control:
hexley	54:e117ad10fba6	481	/// - TP_ENABLE: enable the touch panel
hexley	54:e117ad10fba6	482	/// - TP_DISABLE: disable the touch panel
WiredHome	56:7a85d226ad0d	483	/// @param[in] bTpAutoManual Touch Panel operating mode:
hexley	54:e117ad10fba6	484	/// - TP_MODE_AUTO: automatic capture
hexley	54:e117ad10fba6	485	/// - TP_MODE_MANUAL: manual capture
WiredHome	56:7a85d226ad0d	486	/// @param[in] bTpDebounce Debounce circuit enable for touch panel interrupt:
hexley	54:e117ad10fba6	487	/// - TP_DEBOUNCE_OFF: disable the debounce circuit
hexley	54:e117ad10fba6	488	/// - TP_DEBOUNCE_ON: enable the debounce circuit
WiredHome	56:7a85d226ad0d	489	/// @param[in] bTpManualMode When Manual Mode is selected, this sets the mode:
hexley	54:e117ad10fba6	490	/// - TP_MANUAL_IDLE: touch panel is idle
hexley	54:e117ad10fba6	491	/// - TP_MANUAL_WAIT: wait for touch panel event
hexley	54:e117ad10fba6	492	/// - TP_MANUAL_LATCH_X: latch X data
hexley	54:e117ad10fba6	493	/// - TP_MANUAL_LATCH_Y: latch Y data
WiredHome	56:7a85d226ad0d	494	/// @param[in] bTpAdcClkDiv Sets the ADC clock as a fraction of the System CLK:
hexley	54:e117ad10fba6	495	/// - TP_ADC_CLKDIV_1: Use CLK
hexley	54:e117ad10fba6	496	/// - TP_ADC_CLKDIV_2: Use CLK/2
hexley	54:e117ad10fba6	497	/// - TP_ADC_CLKDIV_4: Use CLK/4
hexley	54:e117ad10fba6	498	/// - TP_ADC_CLKDIV_8: Use CLK/8
hexley	54:e117ad10fba6	499	/// - TP_ADC_CLKDIV_16: Use CLK/16
hexley	54:e117ad10fba6	500	/// - TP_ADC_CLKDIV_32: Use CLK/32
hexley	54:e117ad10fba6	501	/// - TP_ADC_CLKDIV_64: Use CLK/64
hexley	54:e117ad10fba6	502	/// - TP_ADC_CLKDIV_128: Use CLK/128
WiredHome	56:7a85d226ad0d	503	/// @param[in] bTpAdcSampleTime Touch Panel sample time delay before ADC data is ready:
hexley	54:e117ad10fba6	504	/// - TP_ADC_SAMPLE_512_CLKS: Wait 512 system clocks
hexley	54:e117ad10fba6	505	/// - TP_ADC_SAMPLE_1024_CLKS: Wait 1024 system clocks
hexley	54:e117ad10fba6	506	/// - TP_ADC_SAMPLE_2048_CLKS: Wait 2048 system clocks
hexley	54:e117ad10fba6	507	/// - TP_ADC_SAMPLE_4096_CLKS: Wait 4096 system clocks
hexley	54:e117ad10fba6	508	/// - TP_ADC_SAMPLE_8192_CLKS: Wait 8192 system clocks
hexley	54:e117ad10fba6	509	/// - TP_ADC_SAMPLE_16384_CLKS: Wait 16384 system clocks
hexley	54:e117ad10fba6	510	/// - TP_ADC_SAMPLE_32768_CLKS: Wait 32768 system clocks
hexley	54:e117ad10fba6	511	/// - TP_ADC_SAMPLE_65536_CLKS: Wait 65536 system clocks
WiredHome	56:7a85d226ad0d	512	/// @returns success/failure code. @see RetCode_t.
WiredHome	56:7a85d226ad0d	513	///
WiredHome	78:faf49c381591	514	RetCode_t TouchPanelInit(uint8_t bTpEnable, uint8_t bTpAutoManual, uint8_t bTpDebounce,
WiredHome	78:faf49c381591	515	uint8_t bTpManualMode, uint8_t bTpAdcClkDiv, uint8_t bTpAdcSampleTime);
WiredHome	53:86d24b9480b9	516
WiredHome	79:544eb4964795	517	/// Poll the TouchPanel and on a touch event return the a to d filtered x, y coordinates.
hexley	54:e117ad10fba6	518	///
WiredHome	78:faf49c381591	519	/// This method reads the touch controller, which has a 10-bit range for each the
WiredHome	79:544eb4964795	520	/// x and the y axis.
WiredHome	79:544eb4964795	521	///
WiredHome	79:544eb4964795	522	/// @note The returned values are not in display (pixel) units but are in analog to
WiredHome	79:544eb4964795	523	/// digital converter units.
WiredHome	78:faf49c381591	524	///
WiredHome	81:01da2e34283d	525	/// @note This API is usually not needed. @see TouchPanelComputeCalibration.
WiredHome	79:544eb4964795	526	/// @see TouchPanelReadable.
WiredHome	78:faf49c381591	527	///
WiredHome	79:544eb4964795	528	/// @param[out] x is the x scale a/d value.
WiredHome	79:544eb4964795	529	/// @param[out] y is the y scale a/d value.
WiredHome	83:7bad0068cca0	530	/// @returns a value indicating the state of the touch,
WiredHome	83:7bad0068cca0	531	/// - no_cal: no calibration matrix is available, touch coordinates are not returned.
WiredHome	83:7bad0068cca0	532	/// - no_touch: no touch is detected, touch coordinates are not returned.
WiredHome	83:7bad0068cca0	533	/// - touch: touch is detected, touch coordinates are returned.
WiredHome	83:7bad0068cca0	534	/// - held: held after touch, touch coordinates are returned.
WiredHome	83:7bad0068cca0	535	/// - release: indicates a release, touch coordinates are returned.
WiredHome	56:7a85d226ad0d	536	///
WiredHome	83:7bad0068cca0	537	TouchCode_t TouchPanelA2DFiltered(int x, int y);
hexley	54:e117ad10fba6	538
WiredHome	79:544eb4964795	539	/// Poll the TouchPanel and on a touch event return the a to d raw x, y coordinates.
hexley	54:e117ad10fba6	540	///
WiredHome	78:faf49c381591	541	/// This method reads the touch controller, which has a 10-bit range for each the
WiredHome	78:faf49c381591	542	/// x and the y axis. A number of samples of the raw data are taken, filtered,
WiredHome	79:544eb4964795	543	/// and the results are returned.
WiredHome	78:faf49c381591	544	///
WiredHome	79:544eb4964795	545	/// @note The returned values are not in display (pixel) units but are in analog to
WiredHome	79:544eb4964795	546	/// digital converter units.
WiredHome	79:544eb4964795	547	///
WiredHome	81:01da2e34283d	548	/// @note This API is usually not needed. @see TouchPanelComputeCalibration.
WiredHome	79:544eb4964795	549	/// @see TouchPanelReadable.
WiredHome	78:faf49c381591	550	///
WiredHome	79:544eb4964795	551	/// @param[out] x is the x scale a/d value.
WiredHome	79:544eb4964795	552	/// @param[out] y is the y scale a/d value.
WiredHome	83:7bad0068cca0	553	/// @returns a value indicating the state of the touch,
WiredHome	83:7bad0068cca0	554	/// - no_cal: no calibration matrix is available, touch coordinates are not returned.
WiredHome	83:7bad0068cca0	555	/// - no_touch: no touch is detected, touch coordinates are not returned.
WiredHome	83:7bad0068cca0	556	/// - touch: touch is detected, touch coordinates are returned.
WiredHome	83:7bad0068cca0	557	/// - held: held after touch, touch coordinates are returned.
WiredHome	83:7bad0068cca0	558	/// - release: indicates a release, touch coordinates are returned.
WiredHome	83:7bad0068cca0	559	///
WiredHome	83:7bad0068cca0	560	TouchCode_t TouchPanelA2DRaw(int x, int y);
WiredHome	83:7bad0068cca0	561
WiredHome	83:7bad0068cca0	562	/// Get the screen calibrated point of touch.
WiredHome	83:7bad0068cca0	563	///
WiredHome	83:7bad0068cca0	564	/// This method determines if there is a touch and if so it will provide
WiredHome	83:7bad0068cca0	565	/// the screen-relative touch coordinates. This method can be used in
WiredHome	83:7bad0068cca0	566	/// a manner similar to Serial.readable(), to determine if there was a
WiredHome	83:7bad0068cca0	567	/// touch and indicate that - but not care about the coordinates. Alternately,
WiredHome	83:7bad0068cca0	568	/// if a valid pointer to a point_t is provided, then if a touch is detected
WiredHome	83:7bad0068cca0	569	/// the point_t will be populated with data.
WiredHome	56:7a85d226ad0d	570	///
WiredHome	83:7bad0068cca0	571	/// @code
WiredHome	83:7bad0068cca0	572	/// Timer t;
WiredHome	83:7bad0068cca0	573	/// t.start();
WiredHome	83:7bad0068cca0	574	/// do {
WiredHome	83:7bad0068cca0	575	/// point_t point = {0, 0};
WiredHome	83:7bad0068cca0	576	/// if (display.TouchPanelReadable(&point)) {
WiredHome	85:022bba13c5c4	577	/// display.pixel(point, Red);
WiredHome	83:7bad0068cca0	578	/// }
WiredHome	83:7bad0068cca0	579	/// } while (t.read_ms() < 30000);
WiredHome	83:7bad0068cca0	580	/// @endcode
WiredHome	83:7bad0068cca0	581	///
WiredHome	85:022bba13c5c4	582	/// @param[out] TouchPoint is the touch point, if a touch is registered.
WiredHome	83:7bad0068cca0	583	/// @returns a value indicating the state of the touch,
WiredHome	83:7bad0068cca0	584	/// - no_cal: no calibration matrix is available, touch coordinates are not returned.
WiredHome	83:7bad0068cca0	585	/// - no_touch: no touch is detected, touch coordinates are not returned.
WiredHome	83:7bad0068cca0	586	/// - touch: touch is detected, touch coordinates are returned.
WiredHome	83:7bad0068cca0	587	/// - held: held after touch, touch coordinates are returned.
WiredHome	83:7bad0068cca0	588	/// - release: indicates a release, touch coordinates are returned.
WiredHome	83:7bad0068cca0	589	///
WiredHome	85:022bba13c5c4	590	TouchCode_t TouchPanelReadable(point_t * TouchPoint = NULL);
WiredHome	85:022bba13c5c4	591
WiredHome	85:022bba13c5c4	592
WiredHome	85:022bba13c5c4	593	/// Wait for a touch panel touch and return it.
WiredHome	85:022bba13c5c4	594	///
WiredHome	85:022bba13c5c4	595	/// This method is similar to Serial.getc() in that it will wait for a touch
WiredHome	85:022bba13c5c4	596	/// and then return. In order to extract the coordinates of the touch, a
WiredHome	85:022bba13c5c4	597	/// valid pointer to a point_t must be provided.
WiredHome	85:022bba13c5c4	598	///
WiredHome	85:022bba13c5c4	599	/// @note There is no timeout on this function, so its use is not recommended.
WiredHome	85:022bba13c5c4	600	///
WiredHome	85:022bba13c5c4	601	/// @code
WiredHome	85:022bba13c5c4	602	/// Timer t;
WiredHome	85:022bba13c5c4	603	/// t.start();
WiredHome	85:022bba13c5c4	604	/// do {
WiredHome	85:022bba13c5c4	605	/// point_t point = {0, 0};
WiredHome	85:022bba13c5c4	606	/// display.TouchPanelGet(&point); // hangs here until touch
WiredHome	85:022bba13c5c4	607	/// display.pixel(point, Red);
WiredHome	85:022bba13c5c4	608	/// } while (t.read_ms() < 30000);
WiredHome	85:022bba13c5c4	609	/// @endcode
WiredHome	85:022bba13c5c4	610	///
WiredHome	85:022bba13c5c4	611	/// @param[out] TouchPoint is the touch point, if a touch is registered.
WiredHome	85:022bba13c5c4	612	/// @returns a value indicating the state of the touch,
WiredHome	85:022bba13c5c4	613	/// - no_cal: no calibration matrix is available, touch coordinates are not returned.
WiredHome	85:022bba13c5c4	614	/// - no_touch: no touch is detected, touch coordinates are not returned.
WiredHome	85:022bba13c5c4	615	/// - touch: touch is detected, touch coordinates are returned.
WiredHome	85:022bba13c5c4	616	/// - held: held after touch, touch coordinates are returned.
WiredHome	85:022bba13c5c4	617	/// - release: indicates a release, touch coordinates are returned.
WiredHome	85:022bba13c5c4	618	///
WiredHome	85:022bba13c5c4	619	TouchCode_t TouchPanelGet(point_t * TouchPoint);
WiredHome	85:022bba13c5c4	620
WiredHome	83:7bad0068cca0	621
WiredHome	77:9206c13aa527	622	/// Calibrate the touch panel.
WiredHome	77:9206c13aa527	623	///
WiredHome	77:9206c13aa527	624	/// This method accepts two lists - one list is target points in ,
WiredHome	77:9206c13aa527	625	/// display coordinates and the other is a lit of raw touch coordinate
WiredHome	77:9206c13aa527	626	/// values. It generates a calibration matrix for later use. This
WiredHome	77:9206c13aa527	627	/// matrix is also accessible to the calling API, which may store
WiredHome	77:9206c13aa527	628	/// the matrix in persistent memory and then install the calibration
WiredHome	77:9206c13aa527	629	/// matrix on the next power cycle. By doing so, it can avoid the
WiredHome	77:9206c13aa527	630	/// need to calibrate on every power cycle.
WiredHome	77:9206c13aa527	631	///
WiredHome	81:01da2e34283d	632	/// @note The methods "TouchPanelComputeCalibration", "TouchPanelReadable", and
WiredHome	77:9206c13aa527	633	/// indirectly the "TouchPanelSetMatrix" methods are all derived
WiredHome	77:9206c13aa527	634	/// from a program by Carlos E. Vidales. See the copyright note
WiredHome	77:9206c13aa527	635	/// for further details. See also the article
WiredHome	77:9206c13aa527	636	/// http://www.embedded.com/design/system-integration/4023968/How-To-Calibrate-Touch-Screens
WiredHome	77:9206c13aa527	637	///
WiredHome	77:9206c13aa527	638	/// @copyright Copyright (c) 2001, Carlos E. Vidales. All rights reserved.
WiredHome	78:faf49c381591	639	/// This sample program was written and put in the public domain
WiredHome	78:faf49c381591	640	/// by Carlos E. Vidales. The program is provided "as is"
WiredHome	78:faf49c381591	641	/// without warranty of any kind, either expressed or implied.
WiredHome	78:faf49c381591	642	/// If you choose to use the program within your own products
WiredHome	78:faf49c381591	643	/// you do so at your own risk, and assume the responsibility
WiredHome	78:faf49c381591	644	/// for servicing, repairing or correcting the program should
WiredHome	78:faf49c381591	645	/// it prove defective in any manner.
WiredHome	78:faf49c381591	646	/// You may copy and distribute the program's source code in any
WiredHome	78:faf49c381591	647	/// medium, provided that you also include in each copy an
WiredHome	78:faf49c381591	648	/// appropriate copyright notice and disclaimer of warranty.
WiredHome	78:faf49c381591	649	/// You may also modify this program and distribute copies of
WiredHome	78:faf49c381591	650	/// it provided that you include prominent notices stating
WiredHome	78:faf49c381591	651	/// that you changed the file(s) and the date of any change,
WiredHome	78:faf49c381591	652	/// and that you do not charge any royalties or licenses for
WiredHome	78:faf49c381591	653	/// its use.
WiredHome	77:9206c13aa527	654	///
WiredHome	77:9206c13aa527	655	/// @param[in] display is a pointer to a set of 3 points, which
WiredHome	77:9206c13aa527	656	/// are in display units of measure. These are the targets
WiredHome	77:9206c13aa527	657	/// the calibration was aiming for.
WiredHome	77:9206c13aa527	658	/// @param[in] screen is a pointer to a set of 3 points, which
WiredHome	77:9206c13aa527	659	/// are in touchscreen units of measure. These are the
WiredHome	77:9206c13aa527	660	/// registered touches.
WiredHome	77:9206c13aa527	661	/// @param[out] matrix is an optional parameter to hold the calibration matrix
WiredHome	77:9206c13aa527	662	/// as a result of the calibration. This can be saved in
WiredHome	77:9206c13aa527	663	/// non-volatile memory to recover the calibration after a power fail.
WiredHome	77:9206c13aa527	664	/// @returns success/failure code. @see RetCode_t.
WiredHome	77:9206c13aa527	665	///
WiredHome	81:01da2e34283d	666	RetCode_t TouchPanelComputeCalibration(point_t display[3], point_t screen[3], tpMatrix_t * matrix);
WiredHome	81:01da2e34283d	667
WiredHome	81:01da2e34283d	668
WiredHome	81:01da2e34283d	669	/// Perform the touch panel calibration process.
WiredHome	81:01da2e34283d	670	///
WiredHome	81:01da2e34283d	671	/// This method provides the easy "shortcut" to calibrating the touch panel.
WiredHome	81:01da2e34283d	672	/// The process will automatically generate the calibration points, present
WiredHome	81:01da2e34283d	673	/// the targets on-screen, detect the touches, compute the calibration
WiredHome	81:01da2e34283d	674	/// matrix, and optionally provide the calibration matrix to the calling code
WiredHome	81:01da2e34283d	675	/// for persistence in non-volatile memory.
WiredHome	81:01da2e34283d	676	///
WiredHome	81:01da2e34283d	677	/// @param[out] matrix is an optional parameter to hold the calibration matrix
WiredHome	81:01da2e34283d	678	/// as a result of the calibration. This can be saved in
WiredHome	81:01da2e34283d	679	/// non-volatile memory to recover the calibration after a power fail.
WiredHome	81:01da2e34283d	680	/// @returns success/failure code. @see RetCode_t.
WiredHome	81:01da2e34283d	681	///
WiredHome	85:022bba13c5c4	682	RetCode_t TouchPanelCalibrate(tpMatrix_t * matrix = NULL);
WiredHome	81:01da2e34283d	683
WiredHome	81:01da2e34283d	684	/// Perform the touch panel calibration process.
WiredHome	81:01da2e34283d	685	///
WiredHome	81:01da2e34283d	686	/// This method provides the easy "shortcut" to calibrating the touch panel.
WiredHome	81:01da2e34283d	687	/// The process will automatically generate the calibration points, present
WiredHome	81:01da2e34283d	688	/// the targets on-screen, detect the touches, compute the calibration
WiredHome	81:01da2e34283d	689	/// matrix, and optionally provide the calibration matrix to the calling code
WiredHome	81:01da2e34283d	690	/// for persistence in non-volatile memory.
WiredHome	81:01da2e34283d	691	///
WiredHome	81:01da2e34283d	692	/// @param[in] msg is a text message to present on the screen during the
WiredHome	81:01da2e34283d	693	/// calibration process.
WiredHome	81:01da2e34283d	694	/// @param[out] matrix is an optional parameter to hold the calibration matrix
WiredHome	81:01da2e34283d	695	/// as a result of the calibration. This can be saved in
WiredHome	81:01da2e34283d	696	/// non-volatile memory to recover the calibration after a power fail.
WiredHome	88:bfddef6ec836	697	/// @param[in] maxwait_s is the maximum number of seconds to wait for a touch
WiredHome	88:bfddef6ec836	698	/// calibration. If no touch panel installed, it then reports
WiredHome	88:bfddef6ec836	699	/// touch_cal_timeout.
WiredHome	81:01da2e34283d	700	/// @returns success/failure code. @see RetCode_t.
WiredHome	81:01da2e34283d	701	///
WiredHome	88:bfddef6ec836	702	RetCode_t TouchPanelCalibrate(const char * msg, tpMatrix_t * matrix = NULL, int maxwait_s = 15);
WiredHome	77:9206c13aa527	703
WiredHome	77:9206c13aa527	704	/// Set the calibration matrix for the touch panel.
WiredHome	77:9206c13aa527	705	///
WiredHome	77:9206c13aa527	706	/// This method is used to set the calibration matrix for the touch panel. After
WiredHome	81:01da2e34283d	707	/// performing the calibration (@see TouchPanelComputeCalibration), the matrix can be stored.
WiredHome	77:9206c13aa527	708	/// On a subsequence power cycle, the matrix may be restored from non-volatile and
WiredHome	77:9206c13aa527	709	/// passed in to this method. It will then be held to perform the corrections when
WiredHome	77:9206c13aa527	710	/// reading the touch panel point.
WiredHome	77:9206c13aa527	711	///
WiredHome	78:faf49c381591	712	/// @code
WiredHome	78:faf49c381591	713	/// FILE * fh = fopen("/local/tpmatrix.cfg", "r");
WiredHome	78:faf49c381591	714	/// if (fh) {
WiredHome	78:faf49c381591	715	/// tpMatrix_t matrix;
WiredHome	78:faf49c381591	716	/// if (fread(fh, &matrix, sizeof(tpMatrix_t))) {
WiredHome	78:faf49c381591	717	/// lcd.TouchPanelSetMatrix(&matrix);
WiredHome	78:faf49c381591	718	/// }
WiredHome	78:faf49c381591	719	/// fclose(fh);
WiredHome	78:faf49c381591	720	/// }
WiredHome	78:faf49c381591	721	/// @endcode
WiredHome	78:faf49c381591	722	///
WiredHome	77:9206c13aa527	723	/// @param[in] matrix is a pointer to the touch panel calibration matrix.
WiredHome	77:9206c13aa527	724	/// @returns success/failure code. @see RetCode_t.
WiredHome	77:9206c13aa527	725	///
WiredHome	77:9206c13aa527	726	RetCode_t TouchPanelSetMatrix(tpMatrix_t * matrix);
WiredHome	78:faf49c381591	727
WiredHome	75:ca78388cfd77	728	#if 0
hexley	54:e117ad10fba6	729	/// Append interrupt handler for specific RA8875 interrupt source
hexley	54:e117ad10fba6	730	///
hexley	54:e117ad10fba6	731	/// @param[in] bISRType Interrupt Source, should be:
hexley	54:e117ad10fba6	732	/// - RA8875_INT_KEYSCAN: KEYCAN interrupt
hexley	54:e117ad10fba6	733	/// - RA8875_INT_DMA: DMA interrupt
hexley	54:e117ad10fba6	734	/// - RA8875_INT_TP: Touch panel interrupt
hexley	54:e117ad10fba6	735	/// - RA8875_INT_BTE: BTE process complete interrupt
hexley	54:e117ad10fba6	736	/// - RA8875_INT_BTEMCU_FONTWR: Multi-purpose interrupt (see spec sheet)
WiredHome	56:7a85d226ad0d	737	/// @param[in] fptr is a callback function to handle the interrupt event.
WiredHome	56:7a85d226ad0d	738	/// @returns none
hexley	54:e117ad10fba6	739	///
hexley	54:e117ad10fba6	740	void AppendISR(uint8_t bISRType, void(*fptr)(void));
hexley	54:e117ad10fba6	741
hexley	54:e117ad10fba6	742	/// Unappend interrupt handler for specific RA8875 interrupt source
hexley	54:e117ad10fba6	743	///
hexley	54:e117ad10fba6	744	/// @param[in] bISRType Interrupt Source, should be:
hexley	54:e117ad10fba6	745	/// - RA8875_INT_KEYSCAN: KEYCAN interrupt
hexley	54:e117ad10fba6	746	/// - RA8875_INT_DMA: DMA interrupt
hexley	54:e117ad10fba6	747	/// - RA8875_INT_TP: Touch panel interrupt
hexley	54:e117ad10fba6	748	/// - RA8875_INT_BTE: BTE process complete interrupt
hexley	54:e117ad10fba6	749	/// - RA8875_INT_BTEMCU_FONTWR: Multi-purpose interrupt (see spec sheet)
hexley	54:e117ad10fba6	750	/// @return none
hexley	54:e117ad10fba6	751	///
hexley	54:e117ad10fba6	752	void UnAppendISR(uint8_t bISRType);
WiredHome	75:ca78388cfd77	753	#endif
WiredHome	77:9206c13aa527	754
WiredHome	71:dcac8efd842d	755	/// Initialize the keypad interface on the RA8875 controller.
WiredHome	71:dcac8efd842d	756	///
WiredHome	71:dcac8efd842d	757	/// Enables the keypad subsystem. It will scan the 4 x 5 matrix
WiredHome	71:dcac8efd842d	758	/// and make available key presses.
WiredHome	71:dcac8efd842d	759	///
WiredHome	71:dcac8efd842d	760	/// @note See section 5-13 of RAIO RA8875 data sheet for more details.
WiredHome	71:dcac8efd842d	761	/// @caution When using the display from buy-display.com, be sure that
WiredHome	71:dcac8efd842d	762	/// the option for the keypad is configured on the hardware.
WiredHome	71:dcac8efd842d	763	///
WiredHome	71:dcac8efd842d	764	/// All parameters are optional.
WiredHome	76:c981284eb513	765	/// @param[in] scanEnable when true, enables the key scan function (default: true).
WiredHome	76:c981284eb513	766	/// @param[in] longDetect when true, additionally enables the long key held detection (default: false).
WiredHome	71:dcac8efd842d	767	/// @param[in] sampleTime setting (range: 0 - 3, default: 0).
WiredHome	71:dcac8efd842d	768	/// @param[in] scanFrequency setting (range: 0 - 7, default: 0).
WiredHome	71:dcac8efd842d	769	/// @param[in] longTimeAdjustment (range: 0 - 3, default: 0).
WiredHome	76:c981284eb513	770	/// @param[in] interruptEnable when true, enables interrupts from keypress (default: false).
WiredHome	76:c981284eb513	771	/// @param[in] wakeupEnable when true, activates the wakeup function (default: false).
WiredHome	71:dcac8efd842d	772	///
WiredHome	71:dcac8efd842d	773	/// @returns success/failure code. @see RetCode_t.
WiredHome	71:dcac8efd842d	774	///
WiredHome	71:dcac8efd842d	775	RetCode_t KeypadInit(bool scanEnable = true, bool longDetect = false,
WiredHome	71:dcac8efd842d	776	uint8_t sampleTime = 0, uint8_t scanFrequency = 0,
WiredHome	71:dcac8efd842d	777	uint8_t longTimeAdjustment = 0,
WiredHome	71:dcac8efd842d	778	bool interruptEnable = false, bool wakeupEnable = false);
WiredHome	71:dcac8efd842d	779
WiredHome	75:ca78388cfd77	780	/// Create Key Code definitions for the key matrix.
WiredHome	75:ca78388cfd77	781	///
WiredHome	75:ca78388cfd77	782	/// This API provides a table of 22 key-code assignments for the matrix of keys.
WiredHome	75:ca78388cfd77	783	/// This can be used to translate the keys 1 - 20 into some other value, as
WiredHome	75:ca78388cfd77	784	/// well as to communicate the "no key" (zero) and "error state" (21).
WiredHome	75:ca78388cfd77	785	///
WiredHome	75:ca78388cfd77	786	/// In this way, a keypad could easily emulate a piece of a keyboard, transforming
WiredHome	75:ca78388cfd77	787	/// 0 - 20 into the values 0, '0', '1', '2', '3', '4', '5', '6', '7', '8',
WiredHome	75:ca78388cfd77	788	/// '9', '+', '-', '*' , '/', '=', '<bs>', '<cr>', and so on...
WiredHome	75:ca78388cfd77	789	///
WiredHome	75:ca78388cfd77	790	/// @code
WiredHome	75:ca78388cfd77	791	/// // Return Value by Row, Column Example reassignment
WiredHome	75:ca78388cfd77	792	/// // Column 0 1 2 3 4
WiredHome	75:ca78388cfd77	793	/// // +-------------------------+ +-------------------------+
WiredHome	76:c981284eb513	794	/// // Row 0 \| 1 2 3 4 5 \| \| '7' '8' '9' ',' '<-' \|
WiredHome	75:ca78388cfd77	795	/// // 1 \| 6 7 8 9 10 \| \| '4' '5' '6' '/' '-' \|
WiredHome	75:ca78388cfd77	796	/// // 2 \| 11 12 13 14 15 \| \| '1' '2' '3' '*' '+' \|
WiredHome	76:c981284eb513	797	/// // 3 \| 16 17 18 19 20 \| \| '0' '.' '(' ')' '\n' \|
WiredHome	75:ca78388cfd77	798	/// // +-------------------------+ +-------------------------+
WiredHome	75:ca78388cfd77	799	/// // Return value 0 = No Key pressed
WiredHome	75:ca78388cfd77	800	/// // Return value 21 = Error
WiredHome	77:9206c13aa527	801	/// const uint8_t CodeList[22] =
WiredHome	77:9206c13aa527	802	/// {0, '7', '8', '9', ',', '\h',
WiredHome	77:9206c13aa527	803	/// '4', '5', '6', '/', '-',
WiredHome	77:9206c13aa527	804	/// '1', '2', '3', '*', '+',
WiredHome	77:9206c13aa527	805	/// '0', '.', '(', ')', '\n',
WiredHome	77:9206c13aa527	806	/// '\x1b'};
WiredHome	77:9206c13aa527	807	/// lcd.SetKeyMap(CodeList);
WiredHome	75:ca78388cfd77	808	/// @endcode
WiredHome	75:ca78388cfd77	809	///
WiredHome	75:ca78388cfd77	810	/// @param[in] CodeList is a pointer to an always available byte-array
WiredHome	75:ca78388cfd77	811	/// where the first 22 bytes are used as the transformation
WiredHome	75:ca78388cfd77	812	/// from raw code to your reassigned value.
WiredHome	75:ca78388cfd77	813	/// If CodeList is NULL, the original raw value key map is
WiredHome	75:ca78388cfd77	814	/// restored.
WiredHome	75:ca78388cfd77	815	/// @returns noerror.
WiredHome	75:ca78388cfd77	816	///
WiredHome	75:ca78388cfd77	817	RetCode_t SetKeyMap(const uint8_t * CodeList = NULL);
WiredHome	75:ca78388cfd77	818
WiredHome	71:dcac8efd842d	819	/// Determine if a key has been hit
WiredHome	71:dcac8efd842d	820	///
WiredHome	71:dcac8efd842d	821	/// @returns true if a key has been hit
WiredHome	71:dcac8efd842d	822	///
WiredHome	75:ca78388cfd77	823	bool readable();
WiredHome	71:dcac8efd842d	824
WiredHome	71:dcac8efd842d	825	/// Blocking read of the keypad.
WiredHome	71:dcac8efd842d	826	///
WiredHome	71:dcac8efd842d	827	/// @caution: This is a blocking read, so it is important to first call _kbhit()
WiredHome	71:dcac8efd842d	828	/// to avoid hanging your processes.
WiredHome	71:dcac8efd842d	829	///
WiredHome	71:dcac8efd842d	830	/// A keypad connected to the RA8875 is connected in a matrix of 4 rows and 5 columns.
WiredHome	75:ca78388cfd77	831	/// When pressed, this method will return a code in the range of 1 through 20, reserving
WiredHome	75:ca78388cfd77	832	/// the value 0 to indicate that no key is pressed.
WiredHome	71:dcac8efd842d	833	///
WiredHome	71:dcac8efd842d	834	/// Additionally, if configured to detect a "long press", bit 7 will be set to indicate
WiredHome	71:dcac8efd842d	835	/// this. In this situation, first a "normal press" would be detected and signaled and
WiredHome	71:dcac8efd842d	836	/// soon after that a "long press" of the same key would be detected and communicated.
WiredHome	71:dcac8efd842d	837	///
WiredHome	75:ca78388cfd77	838	/// @return 8-bit where bit 7 indicates a long press. The remaining bits indicate the
WiredHome	75:ca78388cfd77	839	/// keypress using 0 = no key pressed, 1 - 20 = the key pressed.
WiredHome	71:dcac8efd842d	840	///
WiredHome	75:ca78388cfd77	841	uint8_t getc();
WiredHome	75:ca78388cfd77	842
WiredHome	82:f7d300f26540	843
WiredHome	82:f7d300f26540	844	/// Determine if a point is within a rectangle.
WiredHome	82:f7d300f26540	845	///
WiredHome	82:f7d300f26540	846	/// @param[in] rect is a rectangular region to use.
WiredHome	82:f7d300f26540	847	/// @param[in] p is a point to analyze to see if it is within the rect.
WiredHome	82:f7d300f26540	848	/// @returns true if p is within rect.
WiredHome	82:f7d300f26540	849	///
WiredHome	82:f7d300f26540	850	bool Intersect(rect_t rect, point_t p);
WiredHome	82:f7d300f26540	851
WiredHome	82:f7d300f26540	852
WiredHome	38:38d503b4fad6	853	/// Write a command to the display with a word of data.
WiredHome	38:38d503b4fad6	854	///
WiredHome	38:38d503b4fad6	855	/// This is a high level command, and may invoke several primitives.
WiredHome	38:38d503b4fad6	856	///
WiredHome	72:ecffe56af969	857	/// @param[in] command is the command to write.
WiredHome	72:ecffe56af969	858	/// @param[in] data is data to be written to the command register.
WiredHome	38:38d503b4fad6	859	/// @returns success/failure code. @see RetCode_t.
WiredHome	38:38d503b4fad6	860	///
WiredHome	38:38d503b4fad6	861	RetCode_t WriteCommandW(uint8_t command, uint16_t data);
WiredHome	38:38d503b4fad6	862
WiredHome	19:3f82c1161fd2	863	/// Write a command to the display
WiredHome	19:3f82c1161fd2	864	///
WiredHome	19:3f82c1161fd2	865	/// This is a high level command, and may invoke several primitives.
WiredHome	19:3f82c1161fd2	866	///
WiredHome	72:ecffe56af969	867	/// @param[in] command is the command to write.
WiredHome	72:ecffe56af969	868	/// @param[in] data is optional data to be written to the command register
WiredHome	19:3f82c1161fd2	869	/// and only occurs if the data is in the range [0 - 0xFF].
WiredHome	19:3f82c1161fd2	870	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	871	///
WiredHome	32:0e4f2ae512e2	872	virtual RetCode_t WriteCommand(unsigned char command, unsigned int data = 0xFFFF);
WiredHome	19:3f82c1161fd2	873
WiredHome	38:38d503b4fad6	874	/// Write a data word to the display
WiredHome	38:38d503b4fad6	875	///
WiredHome	38:38d503b4fad6	876	/// This is a high level command, and may invoke several primitives.
WiredHome	38:38d503b4fad6	877	///
WiredHome	72:ecffe56af969	878	/// @param[in] data is the data to write.
WiredHome	38:38d503b4fad6	879	/// @returns success/failure code. @see RetCode_t.
WiredHome	38:38d503b4fad6	880	///
WiredHome	38:38d503b4fad6	881	RetCode_t WriteDataW(uint16_t data);
WiredHome	38:38d503b4fad6	882
WiredHome	19:3f82c1161fd2	883	/// Write a data byte to the display
WiredHome	19:3f82c1161fd2	884	///
WiredHome	19:3f82c1161fd2	885	/// This is a high level command, and may invoke several primitives.
WiredHome	19:3f82c1161fd2	886	///
WiredHome	72:ecffe56af969	887	/// @param[in] data is the data to write.
WiredHome	19:3f82c1161fd2	888	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	889	///
WiredHome	32:0e4f2ae512e2	890	virtual RetCode_t WriteData(unsigned char data);
WiredHome	19:3f82c1161fd2	891
WiredHome	19:3f82c1161fd2	892	/// Read a command register
WiredHome	19:3f82c1161fd2	893	///
WiredHome	72:ecffe56af969	894	/// @param[in] command is the command register to read.
WiredHome	19:3f82c1161fd2	895	/// @returns the value read from the register.
WiredHome	19:3f82c1161fd2	896	///
WiredHome	19:3f82c1161fd2	897	unsigned char ReadCommand(unsigned char command);
WiredHome	19:3f82c1161fd2	898
WiredHome	41:2956a0a221e5	899	/// Read a data byte from the display
WiredHome	19:3f82c1161fd2	900	///
WiredHome	19:3f82c1161fd2	901	/// This is a high level command, and may invoke several primitives.
WiredHome	19:3f82c1161fd2	902	///
WiredHome	19:3f82c1161fd2	903	/// @returns data that was read.
WiredHome	19:3f82c1161fd2	904	///
WiredHome	19:3f82c1161fd2	905	unsigned char ReadData(void);
WiredHome	19:3f82c1161fd2	906
WiredHome	41:2956a0a221e5	907	/// Read a word from the display
WiredHome	41:2956a0a221e5	908	///
WiredHome	41:2956a0a221e5	909	/// This is a high level command, and may invoke several primitives.
WiredHome	41:2956a0a221e5	910	///
WiredHome	41:2956a0a221e5	911	/// @returns data that was read.
WiredHome	41:2956a0a221e5	912	///
WiredHome	41:2956a0a221e5	913	uint16_t ReadDataW(void);
WiredHome	41:2956a0a221e5	914
WiredHome	19:3f82c1161fd2	915	/// Read the display status
WiredHome	19:3f82c1161fd2	916	///
WiredHome	19:3f82c1161fd2	917	/// This is a high level command, and may invoke several primitives.
WiredHome	19:3f82c1161fd2	918	///
WiredHome	19:3f82c1161fd2	919	/// @returns data that was read.
WiredHome	19:3f82c1161fd2	920	///
WiredHome	19:3f82c1161fd2	921	unsigned char ReadStatus(void);
WiredHome	19:3f82c1161fd2	922
WiredHome	19:3f82c1161fd2	923	/// get the width in pixels of the currently active font
WiredHome	19:3f82c1161fd2	924	///
WiredHome	19:3f82c1161fd2	925	/// @returns font width in pixels.
WiredHome	19:3f82c1161fd2	926	///
WiredHome	37:f19b7e7449dc	927	dim_t fontwidth(void);
WiredHome	19:3f82c1161fd2	928
WiredHome	19:3f82c1161fd2	929	/// get the height in pixels of the currently active font
WiredHome	19:3f82c1161fd2	930	///
WiredHome	19:3f82c1161fd2	931	/// @returns font height in pixels.
WiredHome	19:3f82c1161fd2	932	///
WiredHome	37:f19b7e7449dc	933	dim_t fontheight(void);
WiredHome	19:3f82c1161fd2	934
WiredHome	19:3f82c1161fd2	935	/// get the number of colums based on the currently active font
WiredHome	19:3f82c1161fd2	936	///
WiredHome	19:3f82c1161fd2	937	/// @returns number of columns.
WiredHome	19:3f82c1161fd2	938	///
WiredHome	19:3f82c1161fd2	939	virtual int columns(void);
WiredHome	19:3f82c1161fd2	940
WiredHome	19:3f82c1161fd2	941	/// get the number of rows based on the currently active font
WiredHome	19:3f82c1161fd2	942	///
WiredHome	19:3f82c1161fd2	943	/// @returns number of rows.
WiredHome	19:3f82c1161fd2	944	///
WiredHome	19:3f82c1161fd2	945	virtual int rows(void);
WiredHome	19:3f82c1161fd2	946
WiredHome	19:3f82c1161fd2	947	/// get the screen width in pixels
WiredHome	19:3f82c1161fd2	948	///
WiredHome	19:3f82c1161fd2	949	/// @returns screen width in pixels.
WiredHome	19:3f82c1161fd2	950	///
WiredHome	38:38d503b4fad6	951	virtual dim_t width(void);
WiredHome	19:3f82c1161fd2	952
WiredHome	19:3f82c1161fd2	953	/// get the screen height in pixels
WiredHome	19:3f82c1161fd2	954	///
WiredHome	19:3f82c1161fd2	955	/// @returns screen height in pixels.
WiredHome	19:3f82c1161fd2	956	///
WiredHome	38:38d503b4fad6	957	virtual dim_t height(void);
WiredHome	19:3f82c1161fd2	958
WiredHome	43:3becae133285	959	/// get the color depth in bits per pixel.
WiredHome	43:3becae133285	960	///
WiredHome	43:3becae133285	961	/// @returns 8 or 16 only.
WiredHome	43:3becae133285	962	///
WiredHome	43:3becae133285	963	virtual dim_t color_bpp(void);
WiredHome	43:3becae133285	964
WiredHome	19:3f82c1161fd2	965	/// Set cursor position based on the current font size.
WiredHome	19:3f82c1161fd2	966	///
WiredHome	72:ecffe56af969	967	/// @param[in] column is the horizontal position in character positions
WiredHome	72:ecffe56af969	968	/// @param[in] row is the vertical position in character positions
WiredHome	19:3f82c1161fd2	969	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	970	///
WiredHome	37:f19b7e7449dc	971	virtual RetCode_t locate(textloc_t column, textloc_t row);
WiredHome	19:3f82c1161fd2	972
WiredHome	19:3f82c1161fd2	973	/// Prepare the controller to write text to the screen by positioning
WiredHome	19:3f82c1161fd2	974	/// the cursor.
WiredHome	19:3f82c1161fd2	975	///
WiredHome	56:7a85d226ad0d	976	/// @code
WiredHome	56:7a85d226ad0d	977	/// lcd.SetTextCursor(100, 25);
WiredHome	56:7a85d226ad0d	978	/// lcd.puts("Hello");
WiredHome	56:7a85d226ad0d	979	/// @endcode
WiredHome	56:7a85d226ad0d	980	///
WiredHome	72:ecffe56af969	981	/// @param[in] x is the horizontal position in pixels (from the left edge)
WiredHome	72:ecffe56af969	982	/// @param[in] y is the vertical position in pixels (from the top edge)
WiredHome	19:3f82c1161fd2	983	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	984	///
WiredHome	37:f19b7e7449dc	985	RetCode_t SetTextCursor(loc_t x, loc_t y);
WiredHome	29:422616aa04bd	986
WiredHome	37:f19b7e7449dc	987	/// Get the current cursor position in pixels.
WiredHome	37:f19b7e7449dc	988	///
WiredHome	56:7a85d226ad0d	989	/// @code
WiredHome	56:7a85d226ad0d	990	/// point_t point = GetTextCursor();
WiredHome	56:7a85d226ad0d	991	/// if (point.x > 100 && point.y > 150)
WiredHome	56:7a85d226ad0d	992	/// //...
WiredHome	56:7a85d226ad0d	993	/// @endcode
WiredHome	56:7a85d226ad0d	994	///
WiredHome	37:f19b7e7449dc	995	/// @returns cursor position.
WiredHome	37:f19b7e7449dc	996	///
WiredHome	37:f19b7e7449dc	997	point_t GetTextCursor(void);
WiredHome	37:f19b7e7449dc	998
WiredHome	29:422616aa04bd	999	/// Get the current cursor horizontal position in pixels.
WiredHome	29:422616aa04bd	1000	///
WiredHome	29:422616aa04bd	1001	/// @returns cursor position horizontal offset.
WiredHome	29:422616aa04bd	1002	///
WiredHome	37:f19b7e7449dc	1003	loc_t GetTextCursor_X(void);
WiredHome	29:422616aa04bd	1004
WiredHome	29:422616aa04bd	1005	/// Get the current cursor vertical position in pixels.
WiredHome	29:422616aa04bd	1006	///
WiredHome	29:422616aa04bd	1007	/// @returns cursor position vertical offset.
WiredHome	29:422616aa04bd	1008	///
WiredHome	37:f19b7e7449dc	1009	loc_t GetTextCursor_Y(void);
WiredHome	29:422616aa04bd	1010
WiredHome	23:a50ded45dbaf	1011	/// Configure additional Cursor Control settings.
WiredHome	23:a50ded45dbaf	1012	///
WiredHome	23:a50ded45dbaf	1013	/// This API lets you modify other cursor control settings;
WiredHome	23:a50ded45dbaf	1014	/// Cursor visible/hidden, Cursor blink/normal,
WiredHome	23:a50ded45dbaf	1015	/// Cursor I-Beam/underscore/box.
WiredHome	23:a50ded45dbaf	1016	///
WiredHome	72:ecffe56af969	1017	/// @param[in] cursor can be set to NOCURSOR (default), IBEAM,
WiredHome	24:8ca861acf12d	1018	/// UNDER, or BLOCK.
WiredHome	72:ecffe56af969	1019	/// @param[in] blink can be set to true or false (default false)
WiredHome	23:a50ded45dbaf	1020	/// @returns success/failure code. @see RetCode_t
WiredHome	23:a50ded45dbaf	1021	///
WiredHome	24:8ca861acf12d	1022	RetCode_t SetTextCursorControl(cursor_t cursor = NOCURSOR, bool blink = false);
WiredHome	23:a50ded45dbaf	1023
WiredHome	98:ecebed9b80b2	1024	/// Select the built-in ISO 8859-X font to use next.
WiredHome	19:3f82c1161fd2	1025	///
WiredHome	19:3f82c1161fd2	1026	/// Supported fonts: ISO 8859-1, -2, -3, -4
WiredHome	19:3f82c1161fd2	1027	///
WiredHome	98:ecebed9b80b2	1028	/// @caution This only modifies the choice of font from the RA8875 internal
WiredHome	98:ecebed9b80b2	1029	/// fonts.
WiredHome	98:ecebed9b80b2	1030	///
WiredHome	72:ecffe56af969	1031	/// @param[in] font selects the font for the subsequent text rendering.
WiredHome	19:3f82c1161fd2	1032	///
WiredHome	19:3f82c1161fd2	1033	/// @note if either hScale or vScale is outside of its permitted range,
WiredHome	19:3f82c1161fd2	1034	/// the command is not executed.
WiredHome	19:3f82c1161fd2	1035	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1036	///
WiredHome	19:3f82c1161fd2	1037	RetCode_t SetTextFont(font_t font = ISO8859_1);
WiredHome	19:3f82c1161fd2	1038
WiredHome	84:e102021864b5	1039	/// Sets the display orientation.
WiredHome	84:e102021864b5	1040	///
WiredHome	84:e102021864b5	1041	/// @note This command does not let you "merge" text onto an existing
WiredHome	84:e102021864b5	1042	/// image, since it reuses the memory for the new orientation.
WiredHome	84:e102021864b5	1043	/// Therefore, it is recommended that you issue a cls() prior
WiredHome	84:e102021864b5	1044	/// to sending text to the screen, or you end with a blended
WiredHome	84:e102021864b5	1045	/// image that is probably not as intended.
WiredHome	84:e102021864b5	1046	///
WiredHome	98:ecebed9b80b2	1047	/// @caution This command only operates on the RA8875 internal fonts.
WiredHome	98:ecebed9b80b2	1048	///
WiredHome	84:e102021864b5	1049	/// @code
WiredHome	84:e102021864b5	1050	/// lcd.cls();
WiredHome	84:e102021864b5	1051	/// lcd.SetOrientation(RA8875::normal);
WiredHome	84:e102021864b5	1052	/// lcd.puts(30,30, "Normal Landscape");
WiredHome	84:e102021864b5	1053	/// wait_ms(2500);
WiredHome	84:e102021864b5	1054	///
WiredHome	84:e102021864b5	1055	/// lcd.cls();
WiredHome	84:e102021864b5	1056	/// lcd.SetOrientation(RA8875::rotate_90);
WiredHome	84:e102021864b5	1057	/// lcd.puts(30,30, "Rotated 90 Text\r\n");
WiredHome	84:e102021864b5	1058	/// wait_ms(2500);
WiredHome	84:e102021864b5	1059	///
WiredHome	84:e102021864b5	1060	/// lcd.cls();
WiredHome	84:e102021864b5	1061	/// lcd.SetOrientation(RA8875::rotate_180);
WiredHome	84:e102021864b5	1062	/// lcd.puts(30,30, "Rotated 180 Text\r\n");
WiredHome	84:e102021864b5	1063	/// wait_ms(2500);
WiredHome	84:e102021864b5	1064	///
WiredHome	84:e102021864b5	1065	/// lcd.cls();
WiredHome	84:e102021864b5	1066	/// lcd.SetOrientation(RA8875::rotate_270);
WiredHome	84:e102021864b5	1067	/// lcd.puts(30,30, "Rotated 270 Text\r\n");
WiredHome	84:e102021864b5	1068	/// wait_ms(2500);
WiredHome	84:e102021864b5	1069	/// @endcode
WiredHome	84:e102021864b5	1070	///
WiredHome	84:e102021864b5	1071	/// @param[in] angle defaults to normal, but can be rotated
WiredHome	84:e102021864b5	1072	/// - normal \| rotate_0
WiredHome	84:e102021864b5	1073	/// - rotate_90 (clockwise)
WiredHome	84:e102021864b5	1074	/// - rotate_180
WiredHome	84:e102021864b5	1075	/// - rotate_270 (clockwise)
WiredHome	84:e102021864b5	1076	/// @returns success/failure code. @see RetCode_t.
WiredHome	84:e102021864b5	1077	///
WiredHome	84:e102021864b5	1078	RetCode_t SetOrientation(orientation_t angle = normal);
WiredHome	84:e102021864b5	1079
WiredHome	19:3f82c1161fd2	1080	/// Control the font behavior.
WiredHome	19:3f82c1161fd2	1081	///
WiredHome	19:3f82c1161fd2	1082	/// This command lets you make several modifications to any text that
WiredHome	56:7a85d226ad0d	1083	/// will be written to the screen.
WiredHome	19:3f82c1161fd2	1084	///
WiredHome	98:ecebed9b80b2	1085	/// @caution This command only operates on the RA8875 internal fonts.
WiredHome	98:ecebed9b80b2	1086	///
WiredHome	19:3f82c1161fd2	1087	/// Options can be combined:
WiredHome	19:3f82c1161fd2	1088	/// Default:
WiredHome	19:3f82c1161fd2	1089	/// @li Full alignment disabled,
WiredHome	19:3f82c1161fd2	1090	/// @li Font with Background color,
WiredHome	84:e102021864b5	1091	/// @li Font in normal orientiation, or rotated 90, 180, or 270 clockwise,
WiredHome	84:e102021864b5	1092	/// @li Horizontal scale x 1, 2, 3, or 4
WiredHome	84:e102021864b5	1093	/// @li Vertical scale x 1, 2, 3, or 4
WiredHome	84:e102021864b5	1094	///
WiredHome	84:e102021864b5	1095	/// @note alignment is a special mode for the fonts, when mixing half and
WiredHome	84:e102021864b5	1096	/// full fonts on one presentation. 'align_full' starts each full
WiredHome	84:e102021864b5	1097	/// character on an even alignment. See section 7-4-7 of the RA8875
WiredHome	84:e102021864b5	1098	/// specification.
WiredHome	19:3f82c1161fd2	1099	///
WiredHome	72:ecffe56af969	1100	/// @param[in] fillit defaults to FILL, but can be NOFILL
WiredHome	72:ecffe56af969	1101	/// @param[in] hScale defaults to 1, but can be 1, 2, 3, or 4,
WiredHome	19:3f82c1161fd2	1102	/// and scales the font size by this amount.
WiredHome	72:ecffe56af969	1103	/// @param[in] vScale defaults to 1, but can be 1, 2, 3, or 4,
WiredHome	19:3f82c1161fd2	1104	/// and scales the font size by this amount.
WiredHome	72:ecffe56af969	1105	/// @param[in] alignment defaults to align_none, but can be
WiredHome	19:3f82c1161fd2	1106	/// align_full.
WiredHome	19:3f82c1161fd2	1107	///
WiredHome	19:3f82c1161fd2	1108	/// @note if either hScale or vScale is outside of its permitted range,
WiredHome	19:3f82c1161fd2	1109	/// the command is not executed.
WiredHome	19:3f82c1161fd2	1110	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1111	///
WiredHome	19:3f82c1161fd2	1112	RetCode_t SetTextFontControl(fill_t fillit = FILL,
WiredHome	19:3f82c1161fd2	1113	HorizontalScale hScale = 1,
WiredHome	19:3f82c1161fd2	1114	VerticalScale vScale = 1,
WiredHome	19:3f82c1161fd2	1115	alignment_t alignment = align_none);
WiredHome	19:3f82c1161fd2	1116
WiredHome	98:ecebed9b80b2	1117	/// Control the font size of the RA8875 internal fonts.
WiredHome	19:3f82c1161fd2	1118	///
WiredHome	19:3f82c1161fd2	1119	/// This command lets you set the font enlargement for both horizontal
WiredHome	19:3f82c1161fd2	1120	/// and vertical, independent of the rotation, background, and
WiredHome	19:3f82c1161fd2	1121	/// alignment. @see SetTextFontControl.
WiredHome	19:3f82c1161fd2	1122	///
WiredHome	98:ecebed9b80b2	1123	/// @caution This command only operates on the RA8875 internal fonts.
WiredHome	98:ecebed9b80b2	1124	///
WiredHome	72:ecffe56af969	1125	/// @param[in] hScale defaults to 1, but can be 1, 2, 3, or 4,
WiredHome	19:3f82c1161fd2	1126	/// and scales the font size by this amount.
WiredHome	72:ecffe56af969	1127	/// @param[in] vScale is an optional parameter that defaults to the hScale value,
WiredHome	40:04aa280dfa39	1128	/// but can be 1, 2, 3, or 4, and scales the font size by this amount.
WiredHome	40:04aa280dfa39	1129	///
WiredHome	40:04aa280dfa39	1130	/// @code
WiredHome	40:04aa280dfa39	1131	/// lcd.SetTextFontSize(2); // Set the font to 2x normal size
WiredHome	56:7a85d226ad0d	1132	/// lcd.puts("Two times");
WiredHome	40:04aa280dfa39	1133	/// lcd.SetTextFontSize(2,3); // Set the font to 2x Width and 3x Height
WiredHome	56:7a85d226ad0d	1134	/// lcd.puts("22 3h");
WiredHome	40:04aa280dfa39	1135	/// lcd.SetTextFontSize(); // Restore to normal size in both dimensions
WiredHome	56:7a85d226ad0d	1136	/// lcd.puts("normal");
WiredHome	40:04aa280dfa39	1137	/// @endcode
WiredHome	19:3f82c1161fd2	1138	///
WiredHome	19:3f82c1161fd2	1139	/// @note if either hScale or vScale is outside of its permitted range,
WiredHome	19:3f82c1161fd2	1140	/// the command is not executed.
WiredHome	19:3f82c1161fd2	1141	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1142	///
WiredHome	40:04aa280dfa39	1143	RetCode_t SetTextFontSize(HorizontalScale hScale = 1, VerticalScale vScale = -1);
WiredHome	19:3f82c1161fd2	1144
WiredHome	19:3f82c1161fd2	1145	/// put a character on the screen.
WiredHome	19:3f82c1161fd2	1146	///
WiredHome	72:ecffe56af969	1147	/// @param[in] c is the character.
WiredHome	19:3f82c1161fd2	1148	/// @returns the character, or EOF if there is an error.
WiredHome	19:3f82c1161fd2	1149	///
WiredHome	19:3f82c1161fd2	1150	virtual int _putc(int c);
WiredHome	19:3f82c1161fd2	1151
WiredHome	19:3f82c1161fd2	1152	/// Write string of text to the display
WiredHome	19:3f82c1161fd2	1153	///
WiredHome	56:7a85d226ad0d	1154	/// @code
WiredHome	56:7a85d226ad0d	1155	/// lcd.puts("Test STring");
WiredHome	56:7a85d226ad0d	1156	/// @endcode
WiredHome	56:7a85d226ad0d	1157	///
WiredHome	72:ecffe56af969	1158	/// @param[in] string is the null terminated string to send to the display.
WiredHome	19:3f82c1161fd2	1159	///
WiredHome	19:3f82c1161fd2	1160	void puts(const char * string);
WiredHome	19:3f82c1161fd2	1161
WiredHome	19:3f82c1161fd2	1162	/// Write string of text to the display at the specified location.
WiredHome	19:3f82c1161fd2	1163	///
WiredHome	56:7a85d226ad0d	1164	/// @code
WiredHome	56:7a85d226ad0d	1165	/// lcd.puts(10,25, "Test STring");
WiredHome	56:7a85d226ad0d	1166	/// @endcode
WiredHome	56:7a85d226ad0d	1167	///
WiredHome	72:ecffe56af969	1168	/// @param[in] x is the horizontal position in pixels (from the left edge)
WiredHome	72:ecffe56af969	1169	/// @param[in] y is the vertical position in pixels (from the top edge)
WiredHome	72:ecffe56af969	1170	/// @param[in] string is the null terminated string to send to the display.
WiredHome	19:3f82c1161fd2	1171	///
WiredHome	37:f19b7e7449dc	1172	void puts(loc_t x, loc_t y, const char * string);
WiredHome	19:3f82c1161fd2	1173
WiredHome	19:3f82c1161fd2	1174	/// Prepare the controller to write binary data to the screen by positioning
WiredHome	19:3f82c1161fd2	1175	/// the memory cursor.
WiredHome	19:3f82c1161fd2	1176	///
WiredHome	72:ecffe56af969	1177	/// @param[in] x is the horizontal position in pixels (from the left edge)
WiredHome	72:ecffe56af969	1178	/// @param[in] y is the vertical position in pixels (from the top edge)
WiredHome	19:3f82c1161fd2	1179	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1180	///
WiredHome	37:f19b7e7449dc	1181	virtual RetCode_t SetGraphicsCursor(loc_t x, loc_t y);
WiredHome	19:3f82c1161fd2	1182
WiredHome	41:2956a0a221e5	1183	/// Prepare the controller to read binary data from the screen by positioning
WiredHome	41:2956a0a221e5	1184	/// the memory read cursor.
WiredHome	41:2956a0a221e5	1185	///
WiredHome	72:ecffe56af969	1186	/// @param[in] x is the horizontal position in pixels (from the left edge)
WiredHome	72:ecffe56af969	1187	/// @param[in] y is the vertical position in pixels (from the top edge)
WiredHome	41:2956a0a221e5	1188	/// @returns success/failure code. @see RetCode_t.
WiredHome	41:2956a0a221e5	1189	///
WiredHome	41:2956a0a221e5	1190	virtual RetCode_t SetGraphicsCursorRead(loc_t x, loc_t y);
WiredHome	41:2956a0a221e5	1191
WiredHome	19:3f82c1161fd2	1192	/// Set the window, which controls where items are written to the screen.
WiredHome	19:3f82c1161fd2	1193	///
WiredHome	19:3f82c1161fd2	1194	/// When something hits the window width, it wraps back to the left side
WiredHome	19:3f82c1161fd2	1195	/// and down a row. If the initial write is outside the window, it will
WiredHome	19:3f82c1161fd2	1196	/// be captured into the window when it crosses a boundary.
WiredHome	19:3f82c1161fd2	1197	///
WiredHome	56:7a85d226ad0d	1198	/// @code
WiredHome	56:7a85d226ad0d	1199	/// lcd.window(10,10, 80,80);
WiredHome	56:7a85d226ad0d	1200	/// lcd.puts("012345678901234567890123456789012345678901234567890");
WiredHome	56:7a85d226ad0d	1201	/// @endcode
WiredHome	56:7a85d226ad0d	1202	///
WiredHome	72:ecffe56af969	1203	/// @param[in] x is the left edge in pixels.
WiredHome	72:ecffe56af969	1204	/// @param[in] y is the top edge in pixels.
WiredHome	72:ecffe56af969	1205	/// @param[in] width is the window width in pixels.
WiredHome	72:ecffe56af969	1206	/// @param[in] height is the window height in pixels.
WiredHome	19:3f82c1161fd2	1207	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1208	///
WiredHome	37:f19b7e7449dc	1209	virtual RetCode_t window(loc_t x, loc_t y, dim_t width, dim_t height);
WiredHome	19:3f82c1161fd2	1210
WiredHome	61:8f3153bf0baa	1211	/// Clear either the specified layer, or the active layer.
WiredHome	19:3f82c1161fd2	1212	///
WiredHome	61:8f3153bf0baa	1213	/// The behavior is to clear the whole screen for the specified
WiredHome	61:8f3153bf0baa	1214	/// layer. When not specified, the active drawing layer is cleared.
WiredHome	61:8f3153bf0baa	1215	/// This command can also be used to specifically clear either,
WiredHome	61:8f3153bf0baa	1216	/// or both layers. @see clsw().
WiredHome	19:3f82c1161fd2	1217	///
WiredHome	56:7a85d226ad0d	1218	/// @code
WiredHome	56:7a85d226ad0d	1219	/// lcd.cls();
WiredHome	56:7a85d226ad0d	1220	/// @endcode
WiredHome	56:7a85d226ad0d	1221	///
WiredHome	72:ecffe56af969	1222	/// @param[in] layers is optional. If not provided, the active layer
WiredHome	61:8f3153bf0baa	1223	/// is cleared. If bit 0 is set, layer 0 is cleared, if bit
WiredHome	61:8f3153bf0baa	1224	/// 1 is set, layer 1 is cleared. If both are set, both layers
WiredHome	61:8f3153bf0baa	1225	/// are cleared. Any other value does not cause an action.
WiredHome	61:8f3153bf0baa	1226	///
WiredHome	19:3f82c1161fd2	1227	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1228	///
WiredHome	61:8f3153bf0baa	1229	virtual RetCode_t cls(uint16_t layers = 0);
WiredHome	19:3f82c1161fd2	1230
WiredHome	19:3f82c1161fd2	1231	/// Clear the screen, or clear only the active window.
WiredHome	19:3f82c1161fd2	1232	///
WiredHome	19:3f82c1161fd2	1233	/// The default behavior is to clear the whole screen. With the optional
WiredHome	19:3f82c1161fd2	1234	/// parameter, the action can be restricted to the active window, which
WiredHome	32:0e4f2ae512e2	1235	/// can be set with the @see window method.
WiredHome	19:3f82c1161fd2	1236	///
WiredHome	56:7a85d226ad0d	1237	/// @code
WiredHome	56:7a85d226ad0d	1238	/// lcd.window(20,20, 40,10);
WiredHome	56:7a85d226ad0d	1239	/// lcd.clsw();
WiredHome	56:7a85d226ad0d	1240	/// @endcode
WiredHome	56:7a85d226ad0d	1241	///
WiredHome	72:ecffe56af969	1242	/// @param[in] region is an optional parameter that defaults to FULLWINDOW
WiredHome	19:3f82c1161fd2	1243	/// or may be set to ACTIVEWINDOW.
WiredHome	19:3f82c1161fd2	1244	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1245	///
WiredHome	19:3f82c1161fd2	1246	RetCode_t clsw(RA8875::Region_t region = FULLWINDOW);
WiredHome	19:3f82c1161fd2	1247
WiredHome	19:3f82c1161fd2	1248	/// Set the background color.
WiredHome	19:3f82c1161fd2	1249	///
WiredHome	72:ecffe56af969	1250	/// @param[in] color is expressed in 16-bit format.
WiredHome	19:3f82c1161fd2	1251	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1252	///
WiredHome	19:3f82c1161fd2	1253	virtual RetCode_t background(color_t color);
WiredHome	19:3f82c1161fd2	1254
WiredHome	19:3f82c1161fd2	1255	/// Set the background color.
WiredHome	19:3f82c1161fd2	1256	///
WiredHome	72:ecffe56af969	1257	/// @param[in] r is the red element of the color.
WiredHome	72:ecffe56af969	1258	/// @param[in] g is the green element of the color.
WiredHome	72:ecffe56af969	1259	/// @param[in] b is the blue element of the color.
WiredHome	19:3f82c1161fd2	1260	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1261	///
WiredHome	19:3f82c1161fd2	1262	virtual RetCode_t background(unsigned char r, unsigned char g, unsigned char b);
WiredHome	19:3f82c1161fd2	1263
WiredHome	19:3f82c1161fd2	1264	/// Set the foreground color.
WiredHome	19:3f82c1161fd2	1265	///
WiredHome	72:ecffe56af969	1266	/// @param[in] color is expressed in 16-bit format.
WiredHome	19:3f82c1161fd2	1267	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1268	///
WiredHome	19:3f82c1161fd2	1269	virtual RetCode_t foreground(color_t color);
WiredHome	19:3f82c1161fd2	1270
WiredHome	19:3f82c1161fd2	1271	/// Set the foreground color.
WiredHome	19:3f82c1161fd2	1272	///
WiredHome	72:ecffe56af969	1273	/// @param[in] r is the red element of the color.
WiredHome	72:ecffe56af969	1274	/// @param[in] g is the green element of the color.
WiredHome	72:ecffe56af969	1275	/// @param[in] b is the blue element of the color.
WiredHome	19:3f82c1161fd2	1276	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1277	///
WiredHome	37:f19b7e7449dc	1278	virtual RetCode_t foreground(unsigned char r, unsigned char g, unsigned char b);
WiredHome	19:3f82c1161fd2	1279
WiredHome	19:3f82c1161fd2	1280	/// Get the current foreground color value.
WiredHome	19:3f82c1161fd2	1281	///
WiredHome	19:3f82c1161fd2	1282	/// @returns the current foreground color.
WiredHome	19:3f82c1161fd2	1283	///
WiredHome	37:f19b7e7449dc	1284	color_t GetForeColor(void);
WiredHome	87:ee2240581aa7	1285
WiredHome	87:ee2240581aa7	1286	/// Draw a pixel in the specified color.
WiredHome	87:ee2240581aa7	1287	///
WiredHome	87:ee2240581aa7	1288	/// @note Unlike many other operations, this does not
WiredHome	87:ee2240581aa7	1289	/// set the forecolor!
WiredHome	87:ee2240581aa7	1290	///
WiredHome	87:ee2240581aa7	1291	/// @param[in] p is the point_t defining the location.
WiredHome	87:ee2240581aa7	1292	/// @returns success/failure code. @see RetCode_t.
WiredHome	87:ee2240581aa7	1293	///
WiredHome	87:ee2240581aa7	1294	virtual RetCode_t pixel(point_t p, color_t color);
WiredHome	87:ee2240581aa7	1295
WiredHome	87:ee2240581aa7	1296	/// Draw a pixel in the current foreground color.
WiredHome	87:ee2240581aa7	1297	///
WiredHome	87:ee2240581aa7	1298	/// @param[in] p is the point_t defining the location.
WiredHome	87:ee2240581aa7	1299	/// @returns success/failure code. @see RetCode_t.
WiredHome	87:ee2240581aa7	1300	///
WiredHome	87:ee2240581aa7	1301	virtual RetCode_t pixel(point_t p);
WiredHome	19:3f82c1161fd2	1302
WiredHome	19:3f82c1161fd2	1303	/// Draw a pixel in the specified color.
WiredHome	19:3f82c1161fd2	1304	///
WiredHome	41:2956a0a221e5	1305	/// @note Unlike many other operations, this does not
WiredHome	41:2956a0a221e5	1306	/// set the forecolor!
WiredHome	19:3f82c1161fd2	1307	///
WiredHome	72:ecffe56af969	1308	/// @param[in] x is the horizontal offset to this pixel.
WiredHome	72:ecffe56af969	1309	/// @param[in] y is the vertical offset to this pixel.
WiredHome	72:ecffe56af969	1310	/// @param[in] color defines the color for the pixel.
WiredHome	19:3f82c1161fd2	1311	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1312	///
WiredHome	37:f19b7e7449dc	1313	virtual RetCode_t pixel(loc_t x, loc_t y, color_t color);
WiredHome	19:3f82c1161fd2	1314
WiredHome	19:3f82c1161fd2	1315	/// Draw a pixel in the current foreground color.
WiredHome	19:3f82c1161fd2	1316	///
WiredHome	72:ecffe56af969	1317	/// @param[in] x is the horizontal offset to this pixel.
WiredHome	72:ecffe56af969	1318	/// @param[in] y is the veritical offset to this pixel.
WiredHome	19:3f82c1161fd2	1319	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1320	///
WiredHome	37:f19b7e7449dc	1321	virtual RetCode_t pixel(loc_t x, loc_t y);
WiredHome	19:3f82c1161fd2	1322
WiredHome	41:2956a0a221e5	1323	/// Get a pixel from the display.
WiredHome	41:2956a0a221e5	1324	///
WiredHome	72:ecffe56af969	1325	/// @param[in] x is the horizontal offset to this pixel.
WiredHome	72:ecffe56af969	1326	/// @param[in] y is the vertical offset to this pixel.
WiredHome	41:2956a0a221e5	1327	/// @returns the pixel. see @color_t
WiredHome	41:2956a0a221e5	1328	///
WiredHome	41:2956a0a221e5	1329	virtual color_t getPixel(loc_t x, loc_t y);
WiredHome	41:2956a0a221e5	1330
WiredHome	41:2956a0a221e5	1331	/// Write a stream of pixels to the display.
WiredHome	41:2956a0a221e5	1332	///
WiredHome	72:ecffe56af969	1333	/// @param[in] p is a pointer to a color_t array to write.
WiredHome	72:ecffe56af969	1334	/// @param[in] count is the number of pixels to write.
WiredHome	72:ecffe56af969	1335	/// @param[in] x is the horizontal position on the display.
WiredHome	72:ecffe56af969	1336	/// @param[in] y is the vertical position on the display.
WiredHome	41:2956a0a221e5	1337	/// @returns success/failure code. @see RetCode_t.
WiredHome	41:2956a0a221e5	1338	///
WiredHome	41:2956a0a221e5	1339	virtual RetCode_t pixelStream(color_t * p, uint32_t count, loc_t x, loc_t y);
WiredHome	41:2956a0a221e5	1340
WiredHome	41:2956a0a221e5	1341	/// Get a stream of pixels from the display.
WiredHome	41:2956a0a221e5	1342	///
WiredHome	72:ecffe56af969	1343	/// @param[in] p is a pointer to a color_t array to accept the stream.
WiredHome	72:ecffe56af969	1344	/// @param[in] count is the number of pixels to read.
WiredHome	72:ecffe56af969	1345	/// @param[in] x is the horizontal offset to this pixel.
WiredHome	72:ecffe56af969	1346	/// @param[in] y is the vertical offset to this pixel.
WiredHome	41:2956a0a221e5	1347	/// @returns success/failure code. @see RetCode_t.
WiredHome	41:2956a0a221e5	1348	///
WiredHome	41:2956a0a221e5	1349	virtual RetCode_t getPixelStream(color_t * p, uint32_t count, loc_t x, loc_t y);
WiredHome	41:2956a0a221e5	1350
WiredHome	19:3f82c1161fd2	1351	/// Draw a line in the specified color
WiredHome	19:3f82c1161fd2	1352	///
WiredHome	19:3f82c1161fd2	1353	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1354	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1355	///
WiredHome	83:7bad0068cca0	1356	/// @param[in] p1 is the point to start the line.
WiredHome	83:7bad0068cca0	1357	/// @param[in] p2 is the point to end the line.
WiredHome	83:7bad0068cca0	1358	/// @param[in] color defines the foreground color.
WiredHome	83:7bad0068cca0	1359	/// @returns success/failure code. @see RetCode_t.
WiredHome	83:7bad0068cca0	1360	///
WiredHome	83:7bad0068cca0	1361	RetCode_t line(point_t p1, point_t p2, color_t color);
WiredHome	83:7bad0068cca0	1362
WiredHome	83:7bad0068cca0	1363	/// Draw a line
WiredHome	83:7bad0068cca0	1364	///
WiredHome	83:7bad0068cca0	1365	/// Draws a line using the foreground color setting.
WiredHome	83:7bad0068cca0	1366	///
WiredHome	83:7bad0068cca0	1367	/// @param[in] p1 is the point to start the line.
WiredHome	83:7bad0068cca0	1368	/// @param[in] p2 is the point to end the line.
WiredHome	83:7bad0068cca0	1369	/// @returns success/failure code. @see RetCode_t.
WiredHome	83:7bad0068cca0	1370	///
WiredHome	83:7bad0068cca0	1371	RetCode_t line(point_t p1, point_t p2);
WiredHome	83:7bad0068cca0	1372
WiredHome	83:7bad0068cca0	1373	/// Draw a line in the specified color
WiredHome	83:7bad0068cca0	1374	///
WiredHome	83:7bad0068cca0	1375	/// @note As a side effect, this changes the current
WiredHome	83:7bad0068cca0	1376	/// foreground color for subsequent operations.
WiredHome	83:7bad0068cca0	1377	///
WiredHome	72:ecffe56af969	1378	/// @param[in] x1 is the horizontal start of the line.
WiredHome	72:ecffe56af969	1379	/// @param[in] y1 is the vertical start of the line.
WiredHome	72:ecffe56af969	1380	/// @param[in] x2 is the horizontal end of the line.
WiredHome	72:ecffe56af969	1381	/// @param[in] y2 is the vertical end of the line.
WiredHome	72:ecffe56af969	1382	/// @param[in] color defines the foreground color.
WiredHome	19:3f82c1161fd2	1383	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1384	///
WiredHome	56:7a85d226ad0d	1385	RetCode_t line(loc_t x1, loc_t y1, loc_t x2, loc_t y2, color_t color);
WiredHome	19:3f82c1161fd2	1386
WiredHome	19:3f82c1161fd2	1387	/// Draw a line
WiredHome	19:3f82c1161fd2	1388	///
WiredHome	19:3f82c1161fd2	1389	/// Draws a line using the foreground color setting.
WiredHome	19:3f82c1161fd2	1390	///
WiredHome	72:ecffe56af969	1391	/// @param[in] x1 is the horizontal start of the line.
WiredHome	72:ecffe56af969	1392	/// @param[in] y1 is the vertical start of the line.
WiredHome	72:ecffe56af969	1393	/// @param[in] x2 is the horizontal end of the line.
WiredHome	72:ecffe56af969	1394	/// @param[in] y2 is the vertical end of the line.
WiredHome	19:3f82c1161fd2	1395	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1396	///
WiredHome	37:f19b7e7449dc	1397	RetCode_t line(loc_t x1, loc_t y1, loc_t x2, loc_t y2);
WiredHome	19:3f82c1161fd2	1398
WiredHome	19:3f82c1161fd2	1399	/// Draw a rectangle in the specified color
WiredHome	19:3f82c1161fd2	1400	///
WiredHome	19:3f82c1161fd2	1401	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1402	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1403	///
WiredHome	81:01da2e34283d	1404	/// @param[in] rect defines the rectangle.
WiredHome	81:01da2e34283d	1405	/// @param[in] color defines the foreground color.
WiredHome	81:01da2e34283d	1406	/// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome	81:01da2e34283d	1407	/// @returns success/failure code. @see RetCode_t.
WiredHome	81:01da2e34283d	1408	///
WiredHome	82:f7d300f26540	1409	RetCode_t rect(rect_t rect, color_t color, fill_t fillit = NOFILL);
WiredHome	81:01da2e34283d	1410
WiredHome	81:01da2e34283d	1411	/// Draw a filled rectangle in the specified color
WiredHome	81:01da2e34283d	1412	///
WiredHome	81:01da2e34283d	1413	/// @note As a side effect, this changes the current
WiredHome	81:01da2e34283d	1414	/// foreground color for subsequent operations.
WiredHome	81:01da2e34283d	1415	///
WiredHome	81:01da2e34283d	1416	/// @param[in] rect defines the rectangle.
WiredHome	81:01da2e34283d	1417	/// @param[in] color defines the foreground color.
WiredHome	81:01da2e34283d	1418	/// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome	81:01da2e34283d	1419	/// @returns success/failure code. @see RetCode_t.
WiredHome	81:01da2e34283d	1420	///
WiredHome	81:01da2e34283d	1421	RetCode_t fillrect(rect_t rect, color_t color, fill_t fillit = FILL);
WiredHome	81:01da2e34283d	1422
WiredHome	81:01da2e34283d	1423	/// Draw a rectangle in the specified color
WiredHome	81:01da2e34283d	1424	///
WiredHome	81:01da2e34283d	1425	/// @note As a side effect, this changes the current
WiredHome	81:01da2e34283d	1426	/// foreground color for subsequent operations.
WiredHome	81:01da2e34283d	1427	///
WiredHome	72:ecffe56af969	1428	/// @param[in] x1 is the horizontal start of the line.
WiredHome	72:ecffe56af969	1429	/// @param[in] y1 is the vertical start of the line.
WiredHome	72:ecffe56af969	1430	/// @param[in] x2 is the horizontal end of the line.
WiredHome	72:ecffe56af969	1431	/// @param[in] y2 is the vertical end of the line.
WiredHome	72:ecffe56af969	1432	/// @param[in] color defines the foreground color.
WiredHome	81:01da2e34283d	1433	/// @param[in] fillit is optional to FILL the rectangle. default is FILL.
WiredHome	19:3f82c1161fd2	1434	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1435	///
WiredHome	37:f19b7e7449dc	1436	RetCode_t rect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome	19:3f82c1161fd2	1437	color_t color, fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1438
WiredHome	19:3f82c1161fd2	1439	/// Draw a filled rectangle in the specified color
WiredHome	19:3f82c1161fd2	1440	///
WiredHome	19:3f82c1161fd2	1441	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1442	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1443	///
WiredHome	72:ecffe56af969	1444	/// @param[in] x1 is the horizontal start of the line.
WiredHome	72:ecffe56af969	1445	/// @param[in] y1 is the vertical start of the line.
WiredHome	72:ecffe56af969	1446	/// @param[in] x2 is the horizontal end of the line.
WiredHome	72:ecffe56af969	1447	/// @param[in] y2 is the vertical end of the line.
WiredHome	72:ecffe56af969	1448	/// @param[in] color defines the foreground color.
WiredHome	72:ecffe56af969	1449	/// @param[in] fillit is optional to NOFILL the rectangle. default is FILL.
WiredHome	19:3f82c1161fd2	1450	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1451	///
WiredHome	37:f19b7e7449dc	1452	virtual RetCode_t fillrect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome	19:3f82c1161fd2	1453	color_t color, fill_t fillit = FILL);
WiredHome	19:3f82c1161fd2	1454
WiredHome	19:3f82c1161fd2	1455	/// Draw a rectangle
WiredHome	19:3f82c1161fd2	1456	///
WiredHome	19:3f82c1161fd2	1457	/// Draws a rectangle using the foreground color setting.
WiredHome	19:3f82c1161fd2	1458	///
WiredHome	72:ecffe56af969	1459	/// @param[in] x1 is the horizontal start of the line.
WiredHome	72:ecffe56af969	1460	/// @param[in] y1 is the vertical start of the line.
WiredHome	72:ecffe56af969	1461	/// @param[in] x2 is the horizontal end of the line.
WiredHome	72:ecffe56af969	1462	/// @param[in] y2 is the vertical end of the line.
WiredHome	72:ecffe56af969	1463	/// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome	19:3f82c1161fd2	1464	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1465	///
WiredHome	37:f19b7e7449dc	1466	RetCode_t rect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome	19:3f82c1161fd2	1467	fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1468
WiredHome	19:3f82c1161fd2	1469	/// Draw a filled rectangle with rounded corners using the specified color.
WiredHome	19:3f82c1161fd2	1470	///
WiredHome	21:3c1efb192927	1471	/// This draws a rounded rectangle. A numbers of checks are made on the values,
WiredHome	21:3c1efb192927	1472	/// and it could reduce this to drawing a line (if either x1 == x2, or y1 == y2),
WiredHome	21:3c1efb192927	1473	/// or a single point (x1 == x2 && y1 == y2). If the radius parameters are
WiredHome	21:3c1efb192927	1474	/// > 1/2 the length of that side (width or height), an error value is returned.
WiredHome	21:3c1efb192927	1475	///
WiredHome	19:3f82c1161fd2	1476	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1477	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1478	///
WiredHome	72:ecffe56af969	1479	/// @param[in] x1 is the horizontal start of the line and must be <= x2.
WiredHome	72:ecffe56af969	1480	/// @param[in] y1 is the vertical start of the line and must be <= y2.
WiredHome	72:ecffe56af969	1481	/// @param[in] x2 is the horizontal end of the line and must be >= x1.
WiredHome	72:ecffe56af969	1482	/// @param[in] y2 is the vertical end of the line and must be >= y1.
WiredHome	72:ecffe56af969	1483	/// @param[in] radius1 defines the horizontal radius of the curved corner. Take care
WiredHome	21:3c1efb192927	1484	/// that this value < 1/2 the width of the rectangle, or bad_parameter
WiredHome	21:3c1efb192927	1485	/// is returned.
WiredHome	72:ecffe56af969	1486	/// @param[in] radius2 defines the vertical radius of the curved corner. Take care
WiredHome	21:3c1efb192927	1487	/// that this value < 1/2 the height of the rectangle, or bad_parameter
WiredHome	21:3c1efb192927	1488	/// is returned.
WiredHome	72:ecffe56af969	1489	/// @param[in] color defines the foreground color.
WiredHome	72:ecffe56af969	1490	/// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome	19:3f82c1161fd2	1491	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1492	///
WiredHome	37:f19b7e7449dc	1493	RetCode_t fillroundrect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome	37:f19b7e7449dc	1494	dim_t radius1, dim_t radius2, color_t color, fill_t fillit = FILL);
WiredHome	19:3f82c1161fd2	1495
WiredHome	19:3f82c1161fd2	1496	/// Draw a rectangle with rounded corners using the specified color.
WiredHome	19:3f82c1161fd2	1497	///
WiredHome	21:3c1efb192927	1498	/// This draws a rounded rectangle. A numbers of checks are made on the values,
WiredHome	21:3c1efb192927	1499	/// and it could reduce this to drawing a line (if either x1 == x2, or y1 == y2),
WiredHome	21:3c1efb192927	1500	/// or a single point (x1 == x2 && y1 == y2). If the radius parameters are
WiredHome	21:3c1efb192927	1501	/// > 1/2 the length of that side (width or height), an error value is returned.
WiredHome	21:3c1efb192927	1502	///
WiredHome	19:3f82c1161fd2	1503	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1504	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1505	///
WiredHome	72:ecffe56af969	1506	/// @param[in] x1 is the horizontal start of the line and must be <= x2.
WiredHome	72:ecffe56af969	1507	/// @param[in] y1 is the vertical start of the line and must be <= y2.
WiredHome	72:ecffe56af969	1508	/// @param[in] x2 is the horizontal end of the line and must be >= x1.
WiredHome	72:ecffe56af969	1509	/// @param[in] y2 is the vertical end of the line and must be >= y1.
WiredHome	72:ecffe56af969	1510	/// @param[in] radius1 defines the horizontal radius of the curved corner. Take care
WiredHome	21:3c1efb192927	1511	/// that this value < 1/2 the width of the rectangle, or bad_parameter
WiredHome	21:3c1efb192927	1512	/// is returned.
WiredHome	72:ecffe56af969	1513	/// @param[in] radius2 defines the vertical radius of the curved corner. Take care
WiredHome	21:3c1efb192927	1514	/// that this value < 1/2 the height of the rectangle, or bad_parameter
WiredHome	21:3c1efb192927	1515	/// is returned.
WiredHome	72:ecffe56af969	1516	/// @param[in] color defines the foreground color.
WiredHome	72:ecffe56af969	1517	/// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome	19:3f82c1161fd2	1518	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1519	///
WiredHome	37:f19b7e7449dc	1520	RetCode_t roundrect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome	37:f19b7e7449dc	1521	dim_t radius1, dim_t radius2, color_t color, fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1522
WiredHome	19:3f82c1161fd2	1523	/// Draw a rectangle with rounded corners.
WiredHome	19:3f82c1161fd2	1524	///
WiredHome	21:3c1efb192927	1525	/// This draws a rounded rectangle. A numbers of checks are made on the values,
WiredHome	21:3c1efb192927	1526	/// and it could reduce this to drawing a line (if either x1 == x2, or y1 == y2),
WiredHome	21:3c1efb192927	1527	/// or a single point (x1 == x2 && y1 == y2). If the radius parameters are
WiredHome	21:3c1efb192927	1528	/// > 1/2 the length of that side (width or height), an error value is returned.
WiredHome	19:3f82c1161fd2	1529	///
WiredHome	72:ecffe56af969	1530	/// @param[in] x1 is the horizontal start of the line and must be <= x2.
WiredHome	72:ecffe56af969	1531	/// @param[in] y1 is the vertical start of the line and must be <= y2.
WiredHome	72:ecffe56af969	1532	/// @param[in] x2 is the horizontal end of the line and must be >= x1.
WiredHome	72:ecffe56af969	1533	/// @param[in] y2 is the vertical end of the line and must be >= y1.
WiredHome	72:ecffe56af969	1534	/// @param[in] radius1 defines the horizontal radius of the curved corner. Take care
WiredHome	21:3c1efb192927	1535	/// that this value < 1/2 the width of the rectangle, or bad_parameter
WiredHome	21:3c1efb192927	1536	/// is returned.
WiredHome	72:ecffe56af969	1537	/// @param[in] radius2 defines the vertical radius of the curved corner. Take care
WiredHome	21:3c1efb192927	1538	/// that this value < 1/2 the height of the rectangle, or bad_parameter
WiredHome	21:3c1efb192927	1539	/// is returned.
WiredHome	72:ecffe56af969	1540	/// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome	19:3f82c1161fd2	1541	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1542	///
WiredHome	37:f19b7e7449dc	1543	RetCode_t roundrect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome	37:f19b7e7449dc	1544	dim_t radius1, dim_t radius2, fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1545
WiredHome	19:3f82c1161fd2	1546	/// Draw a triangle in the specified color.
WiredHome	19:3f82c1161fd2	1547	///
WiredHome	19:3f82c1161fd2	1548	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1549	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1550	///
WiredHome	72:ecffe56af969	1551	/// @param[in] x1 is the horizontal for point 1.
WiredHome	72:ecffe56af969	1552	/// @param[in] y1 is the vertical for point 1.
WiredHome	72:ecffe56af969	1553	/// @param[in] x2 is the horizontal for point 2.
WiredHome	72:ecffe56af969	1554	/// @param[in] y2 is the vertical for point 2.
WiredHome	72:ecffe56af969	1555	/// @param[in] x3 is the horizontal for point 3.
WiredHome	72:ecffe56af969	1556	/// @param[in] y3 is the vertical for point 3.
WiredHome	72:ecffe56af969	1557	/// @param[in] color defines the foreground color.
WiredHome	72:ecffe56af969	1558	/// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome	19:3f82c1161fd2	1559	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1560	///
WiredHome	37:f19b7e7449dc	1561	RetCode_t triangle(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome	37:f19b7e7449dc	1562	loc_t x3, loc_t y3, color_t color, fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1563
WiredHome	19:3f82c1161fd2	1564	/// Draw a filled triangle in the specified color.
WiredHome	19:3f82c1161fd2	1565	///
WiredHome	19:3f82c1161fd2	1566	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1567	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1568	///
WiredHome	72:ecffe56af969	1569	/// @param[in] x1 is the horizontal for point 1.
WiredHome	72:ecffe56af969	1570	/// @param[in] y1 is the vertical for point 1.
WiredHome	72:ecffe56af969	1571	/// @param[in] x2 is the horizontal for point 2.
WiredHome	72:ecffe56af969	1572	/// @param[in] y2 is the vertical for point 2.
WiredHome	72:ecffe56af969	1573	/// @param[in] x3 is the horizontal for point 3.
WiredHome	72:ecffe56af969	1574	/// @param[in] y3 is the vertical for point 3.
WiredHome	72:ecffe56af969	1575	/// @param[in] color defines the foreground color.
WiredHome	72:ecffe56af969	1576	/// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome	19:3f82c1161fd2	1577	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1578	///
WiredHome	37:f19b7e7449dc	1579	RetCode_t filltriangle(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome	37:f19b7e7449dc	1580	loc_t x3, loc_t y3, color_t color, fill_t fillit = FILL);
WiredHome	19:3f82c1161fd2	1581
WiredHome	19:3f82c1161fd2	1582	/// Draw a triangle
WiredHome	19:3f82c1161fd2	1583	///
WiredHome	19:3f82c1161fd2	1584	/// Draws a triangle using the foreground color setting.
WiredHome	19:3f82c1161fd2	1585	///
WiredHome	72:ecffe56af969	1586	/// @param[in] x1 is the horizontal for point 1.
WiredHome	72:ecffe56af969	1587	/// @param[in] y1 is the vertical for point 1.
WiredHome	72:ecffe56af969	1588	/// @param[in] x2 is the horizontal for point 2.
WiredHome	72:ecffe56af969	1589	/// @param[in] y2 is the vertical for point 2.
WiredHome	72:ecffe56af969	1590	/// @param[in] x3 is the horizontal for point 3.
WiredHome	72:ecffe56af969	1591	/// @param[in] y3 is the vertical for point 3.
WiredHome	72:ecffe56af969	1592	/// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome	19:3f82c1161fd2	1593	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1594	///
WiredHome	37:f19b7e7449dc	1595	RetCode_t triangle(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome	37:f19b7e7449dc	1596	loc_t x3, loc_t y3, fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1597
WiredHome	83:7bad0068cca0	1598
WiredHome	83:7bad0068cca0	1599	/// Draw a circle using the specified color.
WiredHome	83:7bad0068cca0	1600	///
WiredHome	83:7bad0068cca0	1601	/// @note As a side effect, this changes the current
WiredHome	83:7bad0068cca0	1602	/// foreground color for subsequent operations.
WiredHome	83:7bad0068cca0	1603	///
WiredHome	83:7bad0068cca0	1604	/// @param[in] p defines the center of the circle.
WiredHome	83:7bad0068cca0	1605	/// @param[in] radius defines the size of the circle.
WiredHome	83:7bad0068cca0	1606	/// @param[in] color defines the foreground color.
WiredHome	83:7bad0068cca0	1607	/// @returns success/failure code. @see RetCode_t.
WiredHome	83:7bad0068cca0	1608	///
WiredHome	83:7bad0068cca0	1609	RetCode_t circle(point_t p, dim_t radius, color_t color, fill_t fillit = NOFILL);
WiredHome	83:7bad0068cca0	1610
WiredHome	83:7bad0068cca0	1611	/// Draw a filled circle using the specified color.
WiredHome	83:7bad0068cca0	1612	///
WiredHome	83:7bad0068cca0	1613	/// @note As a side effect, this changes the current
WiredHome	83:7bad0068cca0	1614	/// foreground color for subsequent operations.
WiredHome	83:7bad0068cca0	1615	///
WiredHome	83:7bad0068cca0	1616	/// @param[in] p defines the center of the circle.
WiredHome	83:7bad0068cca0	1617	/// @param[in] radius defines the size of the circle.
WiredHome	83:7bad0068cca0	1618	/// @param[in] color defines the foreground color.
WiredHome	83:7bad0068cca0	1619	/// @returns success/failure code. @see RetCode_t.
WiredHome	83:7bad0068cca0	1620	///
WiredHome	83:7bad0068cca0	1621	RetCode_t fillcircle(point_t p, dim_t radius, color_t color, fill_t fillit = FILL);
WiredHome	83:7bad0068cca0	1622
WiredHome	83:7bad0068cca0	1623	/// Draw a circle.
WiredHome	83:7bad0068cca0	1624	///
WiredHome	83:7bad0068cca0	1625	/// Draws a circle using the foreground color setting.
WiredHome	83:7bad0068cca0	1626	///
WiredHome	83:7bad0068cca0	1627	/// @param[in] p defines the center of the circle.
WiredHome	83:7bad0068cca0	1628	/// @param[in] radius defines the size of the circle.
WiredHome	83:7bad0068cca0	1629	/// @returns success/failure code. @see RetCode_t.
WiredHome	83:7bad0068cca0	1630	///
WiredHome	83:7bad0068cca0	1631	RetCode_t circle(point_t p, dim_t radius, fill_t fillit = NOFILL);
WiredHome	83:7bad0068cca0	1632
WiredHome	19:3f82c1161fd2	1633	/// Draw a circle using the specified color.
WiredHome	19:3f82c1161fd2	1634	///
WiredHome	19:3f82c1161fd2	1635	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1636	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1637	///
WiredHome	72:ecffe56af969	1638	/// @param[in] x is the horizontal center of the circle.
WiredHome	72:ecffe56af969	1639	/// @param[in] y is the vertical center of the circle.
WiredHome	72:ecffe56af969	1640	/// @param[in] radius defines the size of the circle.
WiredHome	72:ecffe56af969	1641	/// @param[in] color defines the foreground color.
WiredHome	19:3f82c1161fd2	1642	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1643	///
WiredHome	37:f19b7e7449dc	1644	RetCode_t circle(loc_t x, loc_t y, dim_t radius, color_t color, fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1645
WiredHome	19:3f82c1161fd2	1646	/// Draw a filled circle using the specified color.
WiredHome	19:3f82c1161fd2	1647	///
WiredHome	19:3f82c1161fd2	1648	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1649	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1650	///
WiredHome	72:ecffe56af969	1651	/// @param[in] x is the horizontal center of the circle.
WiredHome	72:ecffe56af969	1652	/// @param[in] y is the vertical center of the circle.
WiredHome	72:ecffe56af969	1653	/// @param[in] radius defines the size of the circle.
WiredHome	72:ecffe56af969	1654	/// @param[in] color defines the foreground color.
WiredHome	19:3f82c1161fd2	1655	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1656	///
WiredHome	37:f19b7e7449dc	1657	RetCode_t fillcircle(loc_t x, loc_t y, dim_t radius, color_t color, fill_t fillit = FILL);
WiredHome	19:3f82c1161fd2	1658
WiredHome	19:3f82c1161fd2	1659	/// Draw a circle.
WiredHome	19:3f82c1161fd2	1660	///
WiredHome	19:3f82c1161fd2	1661	/// Draws a circle using the foreground color setting.
WiredHome	19:3f82c1161fd2	1662	///
WiredHome	72:ecffe56af969	1663	/// @param[in] x is the horizontal center of the circle.
WiredHome	72:ecffe56af969	1664	/// @param[in] y is the vertical center of the circle.
WiredHome	72:ecffe56af969	1665	/// @param[in] radius defines the size of the circle.
WiredHome	19:3f82c1161fd2	1666	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1667	///
WiredHome	37:f19b7e7449dc	1668	RetCode_t circle(loc_t x, loc_t y, dim_t radius, fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1669
WiredHome	19:3f82c1161fd2	1670	/// Draw an Ellipse using the specified color
WiredHome	19:3f82c1161fd2	1671	///
WiredHome	19:3f82c1161fd2	1672	/// @note As a side effect, this changes the current
WiredHome	19:3f82c1161fd2	1673	/// foreground color for subsequent operations.
WiredHome	19:3f82c1161fd2	1674	///
WiredHome	72:ecffe56af969	1675	/// @param[in] x is the horizontal center of the ellipse.
WiredHome	72:ecffe56af969	1676	/// @param[in] y is the vertical center of the ellipse.
WiredHome	72:ecffe56af969	1677	/// @param[in] radius1 defines the horizontal radius of the ellipse.
WiredHome	72:ecffe56af969	1678	/// @param[in] radius2 defines the vertical radius of the ellipse.
WiredHome	72:ecffe56af969	1679	/// @param[in] color defines the foreground color.
WiredHome	72:ecffe56af969	1680	/// @param[in] fillit defines whether the circle is filled or not.
WiredHome	19:3f82c1161fd2	1681	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1682	///
WiredHome	37:f19b7e7449dc	1683	RetCode_t ellipse(loc_t x, loc_t y, dim_t radius1, dim_t radius2,
WiredHome	19:3f82c1161fd2	1684	color_t color, fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1685
WiredHome	25:9556a3a9b7cc	1686	/// Draw a filled Ellipse using the specified color
WiredHome	25:9556a3a9b7cc	1687	///
WiredHome	25:9556a3a9b7cc	1688	/// @note As a side effect, this changes the current
WiredHome	25:9556a3a9b7cc	1689	/// foreground color for subsequent operations.
WiredHome	25:9556a3a9b7cc	1690	///
WiredHome	72:ecffe56af969	1691	/// @param[in] x is the horizontal center of the ellipse.
WiredHome	72:ecffe56af969	1692	/// @param[in] y is the vertical center of the ellipse.
WiredHome	72:ecffe56af969	1693	/// @param[in] radius1 defines the horizontal radius of the ellipse.
WiredHome	72:ecffe56af969	1694	/// @param[in] radius2 defines the vertical radius of the ellipse.
WiredHome	72:ecffe56af969	1695	/// @param[in] color defines the foreground color.
WiredHome	72:ecffe56af969	1696	/// @param[in] fillit defines whether the circle is filled or not.
WiredHome	25:9556a3a9b7cc	1697	/// @returns success/failure code. @see RetCode_t.
WiredHome	25:9556a3a9b7cc	1698	///
WiredHome	37:f19b7e7449dc	1699	RetCode_t fillellipse(loc_t x, loc_t y, dim_t radius1, dim_t radius2,
WiredHome	25:9556a3a9b7cc	1700	color_t color, fill_t fillit = FILL);
WiredHome	25:9556a3a9b7cc	1701
WiredHome	19:3f82c1161fd2	1702	/// Draw an Ellipse
WiredHome	19:3f82c1161fd2	1703	///
WiredHome	19:3f82c1161fd2	1704	/// Draws it using the foreground color setting.
WiredHome	19:3f82c1161fd2	1705	///
WiredHome	72:ecffe56af969	1706	/// @param[in] x is the horizontal center of the ellipse.
WiredHome	72:ecffe56af969	1707	/// @param[in] y is the vertical center of the ellipse.
WiredHome	72:ecffe56af969	1708	/// @param[in] radius1 defines the horizontal radius of the ellipse.
WiredHome	72:ecffe56af969	1709	/// @param[in] radius2 defines the vertical radius of the ellipse.
WiredHome	72:ecffe56af969	1710	/// @param[in] fillit defines whether the circle is filled or not.
WiredHome	19:3f82c1161fd2	1711	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1712	///
WiredHome	37:f19b7e7449dc	1713	RetCode_t ellipse(loc_t x, loc_t y, dim_t radius1, dim_t radius2, fill_t fillit = NOFILL);
WiredHome	19:3f82c1161fd2	1714
WiredHome	19:3f82c1161fd2	1715	/// Control display power
WiredHome	19:3f82c1161fd2	1716	///
WiredHome	72:ecffe56af969	1717	/// @param[in] on when set to true will turn on the display, when false it is turned off.
WiredHome	19:3f82c1161fd2	1718	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1719	///
WiredHome	19:3f82c1161fd2	1720	RetCode_t Power(bool on);
WiredHome	19:3f82c1161fd2	1721
WiredHome	19:3f82c1161fd2	1722	/// Reset the display controller via the Software Reset interface.
WiredHome	19:3f82c1161fd2	1723	///
WiredHome	19:3f82c1161fd2	1724	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1725	///
WiredHome	19:3f82c1161fd2	1726	RetCode_t Reset(void);
WiredHome	19:3f82c1161fd2	1727
WiredHome	19:3f82c1161fd2	1728	/// Set backlight brightness.
WiredHome	19:3f82c1161fd2	1729	///
WiredHome	19:3f82c1161fd2	1730	/// When the built-in PWM is used to control the backlight, this
WiredHome	19:3f82c1161fd2	1731	/// API can be used to set the brightness.
WiredHome	19:3f82c1161fd2	1732	///
WiredHome	72:ecffe56af969	1733	/// @param[in] brightness ranges from 0 (off) to 255 (full on)
WiredHome	19:3f82c1161fd2	1734	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1735	///
WiredHome	19:3f82c1161fd2	1736	RetCode_t Backlight_u8(unsigned char brightness);
WiredHome	19:3f82c1161fd2	1737
WiredHome	86:e86b355940f4	1738	/// Get backlight brightness.
WiredHome	86:e86b355940f4	1739	///
WiredHome	86:e86b355940f4	1740	/// @returns backlight setting from 0 (off) to 255 (full on).
WiredHome	86:e86b355940f4	1741	///
WiredHome	86:e86b355940f4	1742	uint8_t GetBacklight_u8(void);
WiredHome	86:e86b355940f4	1743
WiredHome	19:3f82c1161fd2	1744	/// Set backlight brightness.
WiredHome	19:3f82c1161fd2	1745	///
WiredHome	19:3f82c1161fd2	1746	/// When the built-in PWM is used to control the backlight, this
WiredHome	19:3f82c1161fd2	1747	/// API can be used to set the brightness.
WiredHome	19:3f82c1161fd2	1748	///
WiredHome	72:ecffe56af969	1749	/// @param[in] brightness ranges from 0.0 (off) to 1.0 (full on)
WiredHome	19:3f82c1161fd2	1750	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	1751	///
WiredHome	19:3f82c1161fd2	1752	RetCode_t Backlight(float brightness);
WiredHome	19:3f82c1161fd2	1753
WiredHome	86:e86b355940f4	1754	/// Get backlight brightness.
WiredHome	86:e86b355940f4	1755	///
WiredHome	86:e86b355940f4	1756	/// @returns backlight setting from 0 (off) to 1.0 (full on).
WiredHome	86:e86b355940f4	1757	///
WiredHome	86:e86b355940f4	1758	float GetBacklight(void);
WiredHome	86:e86b355940f4	1759
WiredHome	98:ecebed9b80b2	1760	/// Select a User Font for all subsequent text.
WiredHome	98:ecebed9b80b2	1761	///
WiredHome	98:ecebed9b80b2	1762	/// @note Tool to create the fonts is accessible from its creator
WiredHome	98:ecebed9b80b2	1763	/// available at http://www.mikroe.com.
WiredHome	98:ecebed9b80b2	1764	/// For version 1.2.0.0, choose the "Export for TFT and new GLCD"
WiredHome	98:ecebed9b80b2	1765	/// format.
WiredHome	98:ecebed9b80b2	1766	///
WiredHome	98:ecebed9b80b2	1767	/// @param[in] font is a pointer to a specially formed font resource.
WiredHome	98:ecebed9b80b2	1768	/// @returns error code.
WiredHome	98:ecebed9b80b2	1769	///
WiredHome	98:ecebed9b80b2	1770	virtual RetCode_t SelectUserFont(const uint8_t * font = NULL);
WiredHome	98:ecebed9b80b2	1771
WiredHome	98:ecebed9b80b2	1772	typedef uint8_t byte;
WiredHome	19:3f82c1161fd2	1773
WiredHome	19:3f82c1161fd2	1774	/// Get the RGB value for a DOS color.
WiredHome	19:3f82c1161fd2	1775	///
WiredHome	72:ecffe56af969	1776	/// @param[in] i is the color, in the range 0 to 15;
WiredHome	19:3f82c1161fd2	1777	/// @returns the RGB color of the selected index, or 0
WiredHome	19:3f82c1161fd2	1778	/// if the index is out of bounds.
WiredHome	19:3f82c1161fd2	1779	///
WiredHome	19:3f82c1161fd2	1780	color_t DOSColor(int i);
WiredHome	19:3f82c1161fd2	1781
WiredHome	19:3f82c1161fd2	1782	/// Get the color name (string) for a DOS color.
WiredHome	19:3f82c1161fd2	1783	///
WiredHome	72:ecffe56af969	1784	/// @param[in] i is the color, in the range 0 to 15;
WiredHome	19:3f82c1161fd2	1785	/// @returns a pointer to a string with the color name,
WiredHome	19:3f82c1161fd2	1786	/// or NULL if the index is out of bounds.
WiredHome	19:3f82c1161fd2	1787	///
WiredHome	19:3f82c1161fd2	1788	const char * DOSColorNames(int i);
WiredHome	19:3f82c1161fd2	1789
WiredHome	55:dfbabef7003e	1790	/// Advanced method indicating the start of a graphics stream.
WiredHome	55:dfbabef7003e	1791	///
WiredHome	55:dfbabef7003e	1792	/// This is called prior to a stream of pixel data being sent.
WiredHome	55:dfbabef7003e	1793	/// This may cause register configuration changes in the derived
WiredHome	55:dfbabef7003e	1794	/// class in order to prepare the hardware to accept the streaming
WiredHome	55:dfbabef7003e	1795	/// data.
WiredHome	55:dfbabef7003e	1796	///
WiredHome	55:dfbabef7003e	1797	/// Following this command, a series of @see _putp() commands can
WiredHome	55:dfbabef7003e	1798	/// be used to send individual pixels to the screen.
WiredHome	55:dfbabef7003e	1799	///
WiredHome	55:dfbabef7003e	1800	/// To conclude the graphics stream, @see _EndGraphicsStream should
WiredHome	55:dfbabef7003e	1801	/// be callled.
WiredHome	55:dfbabef7003e	1802	///
WiredHome	55:dfbabef7003e	1803	/// @returns error code.
WiredHome	55:dfbabef7003e	1804	///
WiredHome	55:dfbabef7003e	1805	virtual RetCode_t _StartGraphicsStream(void);
WiredHome	55:dfbabef7003e	1806
WiredHome	55:dfbabef7003e	1807	/// Advanced method to put a single color pixel to the screen.
WiredHome	55:dfbabef7003e	1808	///
WiredHome	55:dfbabef7003e	1809	/// This method may be called as many times as necessary after
WiredHome	55:dfbabef7003e	1810	/// @see _StartGraphicsStream() is called, and it should be followed
WiredHome	55:dfbabef7003e	1811	/// by _EndGraphicsStream.
WiredHome	55:dfbabef7003e	1812	///
WiredHome	72:ecffe56af969	1813	/// @param[in] pixel is a color value to be put on the screen.
WiredHome	55:dfbabef7003e	1814	/// @returns error code.
WiredHome	55:dfbabef7003e	1815	///
WiredHome	55:dfbabef7003e	1816	virtual RetCode_t _putp(color_t pixel);
WiredHome	55:dfbabef7003e	1817
WiredHome	55:dfbabef7003e	1818	/// Advanced method indicating the end of a graphics stream.
WiredHome	55:dfbabef7003e	1819	///
WiredHome	55:dfbabef7003e	1820	/// This is called to conclude a stream of pixel data that was sent.
WiredHome	55:dfbabef7003e	1821	/// This may cause register configuration changes in the derived
WiredHome	55:dfbabef7003e	1822	/// class in order to stop the hardware from accept the streaming
WiredHome	55:dfbabef7003e	1823	/// data.
WiredHome	55:dfbabef7003e	1824	///
WiredHome	55:dfbabef7003e	1825	/// @returns error code.
WiredHome	55:dfbabef7003e	1826	///
WiredHome	55:dfbabef7003e	1827	virtual RetCode_t _EndGraphicsStream(void);
WiredHome	19:3f82c1161fd2	1828
WiredHome	57:bd53a9e165a1	1829	/// Set the SPI port frequency (in Hz).
WiredHome	57:bd53a9e165a1	1830	///
WiredHome	66:468a11f05580	1831	/// This uses the mbed SPI driver, and is therefore dependent on
WiredHome	66:468a11f05580	1832	/// its capabilities. The RA8875 can accept writes via SPI faster
WiredHome	66:468a11f05580	1833	/// than a read can be performed. The frequency set by this API
WiredHome	66:468a11f05580	1834	/// is for the SPI writes. It will automatically reduce the SPI
WiredHome	66:468a11f05580	1835	/// clock rate when a read is performed, and restore it for the
WiredHome	68:ab08efabfc88	1836	/// next write. Alternately, the 2nd parameters permits setting
WiredHome	68:ab08efabfc88	1837	/// the read speed rather than letting it compute it automatically.
WiredHome	57:bd53a9e165a1	1838	///
WiredHome	66:468a11f05580	1839	/// @note The primary effect of this is to recover more CPU cycles
WiredHome	66:468a11f05580	1840	/// for your application code. Keep in mind that when more than
WiredHome	66:468a11f05580	1841	/// one command is sent to the display controller, that it
WiredHome	66:468a11f05580	1842	/// will wait for the controller to finish the prior command.
WiredHome	66:468a11f05580	1843	/// In this case, the performance is limited by the RA8875.
WiredHome	57:bd53a9e165a1	1844	///
WiredHome	72:ecffe56af969	1845	/// @param[in] Hz is the frequency in Hz, tested range includes the
WiredHome	66:468a11f05580	1846	/// range from 1,000,000 (1MHz) to 10,000,000 (10 MHz). Values
WiredHome	66:468a11f05580	1847	/// outside this range will be accepted, but operation may
WiredHome	76:c981284eb513	1848	/// be unreliable. This depends partially on your hardware design
WiredHome	76:c981284eb513	1849	/// and the wires connecting the display module.
WiredHome	76:c981284eb513	1850	/// The default value is 5,000,000, which should work for most
WiredHome	76:c981284eb513	1851	/// applications as a starting point.
WiredHome	72:ecffe56af969	1852	/// @param[in] Hz2 is an optional parameter and will set the read
WiredHome	68:ab08efabfc88	1853	/// speed independently of the write speed.
WiredHome	57:bd53a9e165a1	1854	/// @returns success/failure code. @see RetCode_t.
WiredHome	57:bd53a9e165a1	1855	///
WiredHome	68:ab08efabfc88	1856	RetCode_t frequency(unsigned long Hz = RA8875_DEFAULT_SPI_FREQ, unsigned long Hz2 = 0);
WiredHome	57:bd53a9e165a1	1857
WiredHome	72:ecffe56af969	1858	/// This method captures the specified area as a 24-bit bitmap file.
WiredHome	72:ecffe56af969	1859	///
WiredHome	72:ecffe56af969	1860	/// Even though this is a 16-bit display, the stored image is in
WiredHome	72:ecffe56af969	1861	/// 24-bit format.
WiredHome	72:ecffe56af969	1862	///
WiredHome	73:f22a18707b5e	1863	/// This method will interrogate the current display setting and
WiredHome	73:f22a18707b5e	1864	/// create a bitmap based on those settings. For instance, if
WiredHome	73:f22a18707b5e	1865	/// only layer 1 is visible, then the bitmap is only layer 1. However,
WiredHome	73:f22a18707b5e	1866	/// if there is some other operation in effect (transparent mode).
WiredHome	73:f22a18707b5e	1867	///
WiredHome	72:ecffe56af969	1868	/// @param[in] x is the left edge of the region to capture
WiredHome	72:ecffe56af969	1869	/// @param[in] y is the top edge of the region to capture
WiredHome	72:ecffe56af969	1870	/// @param[in] w is the width of the region to capture
WiredHome	72:ecffe56af969	1871	/// @param[in] h is the height of the region to capture.
WiredHome	72:ecffe56af969	1872	/// @param[out] Name_BMP is the filename to write the image to.
WiredHome	72:ecffe56af969	1873	/// @return success or error code.
WiredHome	72:ecffe56af969	1874	///
WiredHome	72:ecffe56af969	1875	RetCode_t PrintScreen(loc_t x, loc_t y, dim_t w, dim_t h, const char *Name_BMP);
WiredHome	72:ecffe56af969	1876
WiredHome	96:40b74dd3695b	1877	/// This method captures the specified area as a 24-bit bitmap file
WiredHome	96:40b74dd3695b	1878	/// and delivers it to the previously attached callback.
WiredHome	96:40b74dd3695b	1879	///
WiredHome	96:40b74dd3695b	1880	/// Even though this is a 16-bit display, the stored image is in
WiredHome	96:40b74dd3695b	1881	/// 24-bit format.
WiredHome	96:40b74dd3695b	1882	///
WiredHome	96:40b74dd3695b	1883	/// This method will interrogate the current display setting and
WiredHome	96:40b74dd3695b	1884	/// create a bitmap based on those settings. For instance, if
WiredHome	96:40b74dd3695b	1885	/// only layer 1 is visible, then the bitmap is only layer 1. However,
WiredHome	96:40b74dd3695b	1886	/// if there is some other operation in effect (transparent mode), it
WiredHome	96:40b74dd3695b	1887	/// will return the blended image.
WiredHome	96:40b74dd3695b	1888	///
WiredHome	96:40b74dd3695b	1889	/// @param[in] x is the left edge of the region to capture
WiredHome	96:40b74dd3695b	1890	/// @param[in] y is the top edge of the region to capture
WiredHome	96:40b74dd3695b	1891	/// @param[in] w is the width of the region to capture
WiredHome	96:40b74dd3695b	1892	/// @param[in] h is the height of the region to capture.
WiredHome	96:40b74dd3695b	1893	/// @return success or error code.
WiredHome	96:40b74dd3695b	1894	///
WiredHome	96:40b74dd3695b	1895	RetCode_t PrintScreen(loc_t x, loc_t y, dim_t w, dim_t h);
WiredHome	96:40b74dd3695b	1896
WiredHome	96:40b74dd3695b	1897	/// PrintScreen callback registration.
WiredHome	96:40b74dd3695b	1898	///
WiredHome	96:40b74dd3695b	1899	/// This method attaches a simple c-compatible callback of type PrintCallback_T.
WiredHome	96:40b74dd3695b	1900	/// Then, the PrintScreen(x,y,w,h) method is called. Each chunk of data in the
WiredHome	96:40b74dd3695b	1901	/// BMP file to be created is passed to this callback.
WiredHome	96:40b74dd3695b	1902	///
WiredHome	96:40b74dd3695b	1903	/// @param callback is the callback function.
WiredHome	96:40b74dd3695b	1904	///
WiredHome	96:40b74dd3695b	1905	void AttachPrintHandler(PrintCallback_T callback) { c_callback = callback; }
WiredHome	96:40b74dd3695b	1906
WiredHome	96:40b74dd3695b	1907	/// PrintScreen callback registration.
WiredHome	96:40b74dd3695b	1908	///
WiredHome	96:40b74dd3695b	1909	/// This method attaches a c++ class method as a callback of type PrintCallback_T.
WiredHome	96:40b74dd3695b	1910	/// Then, the PrintScreen(x,y,w,h) method is called. Each chunk of data in the
WiredHome	96:40b74dd3695b	1911	/// BMP file to be created is passed to this callback.
WiredHome	96:40b74dd3695b	1912	///
WiredHome	96:40b74dd3695b	1913	/// @param object is the class hosting the callback function.
WiredHome	102:fc60bfa0199f	1914	/// @param method is the callback method in the object to activate.
WiredHome	96:40b74dd3695b	1915	///
WiredHome	96:40b74dd3695b	1916	template <class T>
WiredHome	102:fc60bfa0199f	1917	void AttachPrintHandler(T object, RetCode_t (T::method)(void)) {
WiredHome	102:fc60bfa0199f	1918	obj_callback = (FPointerDummy *)object;
WiredHome	96:40b74dd3695b	1919	method_callback = (uint32_t (FPointerDummy::*)(uint32_t))method;
WiredHome	96:40b74dd3695b	1920	}
WiredHome	96:40b74dd3695b	1921
WiredHome	72:ecffe56af969	1922	/// This method captures the specified area as a 24-bit bitmap file,
WiredHome	72:ecffe56af969	1923	/// including the option of layer selection.
WiredHome	72:ecffe56af969	1924	///
WiredHome	74:686faa218914	1925	/// @caution This method is deprecated as the alternate PrintScreen API
WiredHome	74:686faa218914	1926	/// automatically examines the display layer configuration.
WiredHome	74:686faa218914	1927	/// Therefore, calls to this API will ignore the layer parameter
WiredHome	74:686faa218914	1928	/// and automatically execute the other method.
WiredHome	74:686faa218914	1929	///
WiredHome	72:ecffe56af969	1930	/// Even though this is a 16-bit display, the stored image is in
WiredHome	72:ecffe56af969	1931	/// 24-bit format.
WiredHome	72:ecffe56af969	1932	///
WiredHome	72:ecffe56af969	1933	/// @param[in] layer is 0 or 1 to select the layer to extract.
WiredHome	72:ecffe56af969	1934	/// @param[in] x is the left edge of the region to capture
WiredHome	72:ecffe56af969	1935	/// @param[in] y is the top edge of the region to capture
WiredHome	72:ecffe56af969	1936	/// @param[in] w is the width of the region to capture
WiredHome	72:ecffe56af969	1937	/// @param[in] h is the height of the region to capture.
WiredHome	72:ecffe56af969	1938	/// @param[out] Name_BMP is the filename to write the image to.
WiredHome	72:ecffe56af969	1939	/// @return success or error code.
WiredHome	72:ecffe56af969	1940	///
WiredHome	72:ecffe56af969	1941	RetCode_t PrintScreen(uint16_t layer, loc_t x, loc_t y, dim_t w, dim_t h, const char *Name_BMP);
WiredHome	72:ecffe56af969	1942
WiredHome	57:bd53a9e165a1	1943
WiredHome	19:3f82c1161fd2	1944	#ifdef PERF_METRICS
WiredHome	19:3f82c1161fd2	1945	/// Clear the performance metrics to zero.
WiredHome	19:3f82c1161fd2	1946	void ClearPerformance();
WiredHome	19:3f82c1161fd2	1947
WiredHome	66:468a11f05580	1948	/// Count idle time.
WiredHome	66:468a11f05580	1949	///
WiredHome	72:ecffe56af969	1950	/// @param[in] t is the amount of idle time to accumulate.
WiredHome	66:468a11f05580	1951	///
WiredHome	66:468a11f05580	1952	void CountIdleTime(uint32_t t);
WiredHome	66:468a11f05580	1953
WiredHome	19:3f82c1161fd2	1954	/// Report the performance metrics for drawing functions using
WiredHome	41:2956a0a221e5	1955	/// the available serial channel.
WiredHome	41:2956a0a221e5	1956	///
WiredHome	72:ecffe56af969	1957	/// @param[in,out] pc is the serial channel to write to.
WiredHome	41:2956a0a221e5	1958	///
WiredHome	41:2956a0a221e5	1959	void ReportPerformance(Serial & pc);
WiredHome	19:3f82c1161fd2	1960	#endif
WiredHome	19:3f82c1161fd2	1961
hexley	54:e117ad10fba6	1962
WiredHome	19:3f82c1161fd2	1963	private:
hexley	54:e117ad10fba6	1964	/// Touch Panel register name definitions
WiredHome	77:9206c13aa527	1965	#define TPCR0 0x70
WiredHome	77:9206c13aa527	1966	#define TPCR1 0x71
WiredHome	77:9206c13aa527	1967	#define TPXH 0x72
WiredHome	77:9206c13aa527	1968	#define TPYH 0x73
WiredHome	77:9206c13aa527	1969	#define TPXYL 0x74
WiredHome	77:9206c13aa527	1970	#define INTC1 0xF0
WiredHome	77:9206c13aa527	1971	#define INTC2 0xF1
hexley	54:e117ad10fba6	1972
hexley	54:e117ad10fba6	1973	/// Specify the default settings for the Touch Panel, where different from the chip defaults
WiredHome	77:9206c13aa527	1974	#define TP_MODE_DEFAULT TP_MODE_AUTO
WiredHome	77:9206c13aa527	1975	#define TP_DEBOUNCE_DEFAULT TP_DEBOUNCE_ON
WiredHome	77:9206c13aa527	1976	#define TP_ADC_CLKDIV_DEFAULT TP_ADC_CLKDIV_8
hexley	54:e117ad10fba6	1977
WiredHome	77:9206c13aa527	1978	#define TP_ADC_SAMPLE_DEFAULT_CLKS TP_ADC_SAMPLE_8192_CLKS
hexley	54:e117ad10fba6	1979
hexley	54:e117ad10fba6	1980	/// Other Touch Panel params
WiredHome	77:9206c13aa527	1981	#define TPBUFSIZE 16 // Depth of the averaging buffers for x and y data
hexley	54:e117ad10fba6	1982
WiredHome	83:7bad0068cca0	1983	// Needs both a ticker and a timer. (could have created a timer from the ticker, but this is easier).
WiredHome	83:7bad0068cca0	1984	// on a touch, the timer is reset.
WiredHome	83:7bad0068cca0	1985	// the ticker monitors the timer to see if it has been a long time since
WiredHome	83:7bad0068cca0	1986	// a touch, and if so, it then clears the sample counter so it doesn't get partial old
WiredHome	83:7bad0068cca0	1987	// and partial new.
WiredHome	83:7bad0068cca0	1988
WiredHome	83:7bad0068cca0	1989	/// Touch State used by TouchPanelReadable. @see TouchCode_t.
WiredHome	83:7bad0068cca0	1990	TouchCode_t touchState;
WiredHome	83:7bad0068cca0	1991
WiredHome	83:7bad0068cca0	1992	/// Touch Panel ticker
WiredHome	83:7bad0068cca0	1993	Ticker touchTicker;
WiredHome	83:7bad0068cca0	1994
WiredHome	83:7bad0068cca0	1995	/// Touch Panel timer
WiredHome	83:7bad0068cca0	1996	Timer touchTimer;
WiredHome	83:7bad0068cca0	1997
WiredHome	83:7bad0068cca0	1998	/// keeps track of which sample we're collecting to filter out the noise.
WiredHome	83:7bad0068cca0	1999	int touchSample;
WiredHome	83:7bad0068cca0	2000
WiredHome	83:7bad0068cca0	2001	/// Private function for touch ticker callback.
WiredHome	83:7bad0068cca0	2002	void _TouchTicker(void);
WiredHome	83:7bad0068cca0	2003
WiredHome	77:9206c13aa527	2004	/// Touch Panel calibration matrix.
WiredHome	77:9206c13aa527	2005	tpMatrix_t tpMatrix;
hexley	54:e117ad10fba6	2006
WiredHome	29:422616aa04bd	2007	/// Internal function to put a character using the built-in (internal) font engine
WiredHome	29:422616aa04bd	2008	///
WiredHome	101:e0aad446094a	2009	/// @param[in] c is the character to put to the screen.
WiredHome	29:422616aa04bd	2010	/// @returns the character put.
WiredHome	29:422616aa04bd	2011	///
WiredHome	29:422616aa04bd	2012	int _internal_putc(int c);
WiredHome	29:422616aa04bd	2013
WiredHome	29:422616aa04bd	2014	/// Internal function to put a character using the external font engine
WiredHome	29:422616aa04bd	2015	///
WiredHome	101:e0aad446094a	2016	/// @param[in] c is the character to put to the screen.
WiredHome	29:422616aa04bd	2017	/// @returns the character put.
WiredHome	29:422616aa04bd	2018	///
WiredHome	29:422616aa04bd	2019	int _external_putc(int c);
WiredHome	29:422616aa04bd	2020
WiredHome	101:e0aad446094a	2021	/// Internal function to get the actual width of a character when using the external font engine
WiredHome	101:e0aad446094a	2022	///
WiredHome	101:e0aad446094a	2023	/// @param[in] c is the character to get the width.
WiredHome	101:e0aad446094a	2024	/// @returns the width in pixels of the character. zero if not found.
WiredHome	101:e0aad446094a	2025	///
WiredHome	101:e0aad446094a	2026	int _external_getCharWidth(int c);
WiredHome	101:e0aad446094a	2027
WiredHome	19:3f82c1161fd2	2028	/// Select the peripheral to use it.
WiredHome	19:3f82c1161fd2	2029	///
WiredHome	72:ecffe56af969	2030	/// @param[in] chipsel when true will select the peripheral, and when false
WiredHome	19:3f82c1161fd2	2031	/// will deselect the chip. This is the logical selection, and
WiredHome	19:3f82c1161fd2	2032	/// the pin selection is the invert of this.
WiredHome	19:3f82c1161fd2	2033	/// @returns success/failure code. @see RetCode_t.
WiredHome	19:3f82c1161fd2	2034	///
WiredHome	79:544eb4964795	2035	RetCode_t _select(bool chipsel);
WiredHome	19:3f82c1161fd2	2036
WiredHome	66:468a11f05580	2037	/// Wait while the status register indicates the controller is busy.
WiredHome	66:468a11f05580	2038	///
WiredHome	72:ecffe56af969	2039	/// @param[in] mask is the mask of bits to monitor.
WiredHome	66:468a11f05580	2040	/// @returns true if a normal exit.
WiredHome	66:468a11f05580	2041	/// @returns false if a timeout exit.
WiredHome	66:468a11f05580	2042	///
WiredHome	66:468a11f05580	2043	bool _WaitWhileBusy(uint8_t mask);
WiredHome	66:468a11f05580	2044
WiredHome	66:468a11f05580	2045	/// Wait while the the register anded with the mask is true.
WiredHome	66:468a11f05580	2046	///
WiredHome	72:ecffe56af969	2047	/// @param[in] reg is the register to monitor
WiredHome	72:ecffe56af969	2048	/// @param[in] mask is the bit mask to monitor
WiredHome	66:468a11f05580	2049	/// @returns true if it was a normal exit
WiredHome	66:468a11f05580	2050	/// @returns false if it was a timeout that caused the exit.
WiredHome	66:468a11f05580	2051	///
WiredHome	66:468a11f05580	2052	bool _WaitWhileReg(uint8_t reg, uint8_t mask);
WiredHome	66:468a11f05580	2053
WiredHome	68:ab08efabfc88	2054	/// set the spi port to either the write or the read speed.
WiredHome	68:ab08efabfc88	2055	///
WiredHome	68:ab08efabfc88	2056	/// This is a private API used to toggle between the write
WiredHome	68:ab08efabfc88	2057	/// and the read speed for the SPI port to the RA8875, since
WiredHome	68:ab08efabfc88	2058	/// it can accept writes faster than reads.
WiredHome	68:ab08efabfc88	2059	///
WiredHome	72:ecffe56af969	2060	/// @param[in] writeSpeed when true selects the write frequency,
WiredHome	68:ab08efabfc88	2061	/// and when false it selects the read frequency.
WiredHome	68:ab08efabfc88	2062	///
WiredHome	68:ab08efabfc88	2063	void _setWriteSpeed(bool writeSpeed);
WiredHome	68:ab08efabfc88	2064
WiredHome	19:3f82c1161fd2	2065	/// The most primitive - to write a data value to the SPI interface.
WiredHome	19:3f82c1161fd2	2066	///
WiredHome	72:ecffe56af969	2067	/// @param[in] data is the value to write.
WiredHome	19:3f82c1161fd2	2068	/// @returns a value read from the port, since SPI is often shift
WiredHome	19:3f82c1161fd2	2069	/// in while shifting out.
WiredHome	19:3f82c1161fd2	2070	///
WiredHome	79:544eb4964795	2071	unsigned char _spiwrite(unsigned char data);
WiredHome	19:3f82c1161fd2	2072
WiredHome	19:3f82c1161fd2	2073	/// The most primitive - to read a data value to the SPI interface.
WiredHome	19:3f82c1161fd2	2074	///
WiredHome	19:3f82c1161fd2	2075	/// This is really just a specialcase of the write command, where
WiredHome	19:3f82c1161fd2	2076	/// the value zero is written in order to read.
WiredHome	19:3f82c1161fd2	2077	///
WiredHome	19:3f82c1161fd2	2078	/// @returns a value read from the port, since SPI is often shift
WiredHome	19:3f82c1161fd2	2079	/// in while shifting out.
WiredHome	19:3f82c1161fd2	2080	///
WiredHome	79:544eb4964795	2081	unsigned char _spiread();
WiredHome	19:3f82c1161fd2	2082
WiredHome	75:ca78388cfd77	2083	const uint8_t * pKeyMap;
WiredHome	75:ca78388cfd77	2084
WiredHome	19:3f82c1161fd2	2085	SPI spi; ///< spi port
WiredHome	68:ab08efabfc88	2086	bool spiWriteSpeed; ///< indicates if the current mode is write or read
WiredHome	68:ab08efabfc88	2087	unsigned long spiwritefreq; ///< saved write freq
WiredHome	66:468a11f05580	2088	unsigned long spireadfreq; ///< saved read freq
WiredHome	19:3f82c1161fd2	2089	DigitalOut cs; ///< chip select pin, assumed active low
WiredHome	19:3f82c1161fd2	2090	DigitalOut res; ///< reset pin, assumed active low
WiredHome	90:d113d71ae4f0	2091
WiredHome	90:d113d71ae4f0	2092	dim_t screenwidth; ///< configured screen width
WiredHome	90:d113d71ae4f0	2093	dim_t screenheight; ///< configured screen height
WiredHome	90:d113d71ae4f0	2094	bool portraitmode; ///< set true when in portrait mode (w,h are reversed)
WiredHome	90:d113d71ae4f0	2095
WiredHome	19:3f82c1161fd2	2096	const unsigned char * font; ///< reference to an external font somewhere in memory
WiredHome	98:ecebed9b80b2	2097	uint8_t extFontHeight; ///< computed from the font table when the user sets the font
WiredHome	98:ecebed9b80b2	2098	uint8_t extFontWidth; ///< computed from the font table when the user sets the font
WiredHome	98:ecebed9b80b2	2099
WiredHome	90:d113d71ae4f0	2100	loc_t cursor_x, cursor_y; ///< used for external fonts only
WiredHome	19:3f82c1161fd2	2101
WiredHome	19:3f82c1161fd2	2102	#ifdef PERF_METRICS
WiredHome	19:3f82c1161fd2	2103	typedef enum
WiredHome	19:3f82c1161fd2	2104	{
WiredHome	19:3f82c1161fd2	2105	PRF_CLS,
WiredHome	41:2956a0a221e5	2106	PRF_DRAWPIXEL,
WiredHome	41:2956a0a221e5	2107	PRF_PIXELSTREAM,
WiredHome	41:2956a0a221e5	2108	PRF_READPIXEL,
WiredHome	41:2956a0a221e5	2109	PRF_READPIXELSTREAM,
WiredHome	19:3f82c1161fd2	2110	PRF_DRAWLINE,
WiredHome	19:3f82c1161fd2	2111	PRF_DRAWRECTANGLE,
WiredHome	19:3f82c1161fd2	2112	PRF_DRAWROUNDEDRECTANGLE,
WiredHome	19:3f82c1161fd2	2113	PRF_DRAWTRIANGLE,
WiredHome	19:3f82c1161fd2	2114	PRF_DRAWCIRCLE,
WiredHome	19:3f82c1161fd2	2115	PRF_DRAWELLIPSE,
WiredHome	19:3f82c1161fd2	2116	METRICCOUNT
WiredHome	19:3f82c1161fd2	2117	} method_e;
WiredHome	19:3f82c1161fd2	2118	unsigned long metrics[METRICCOUNT];
WiredHome	75:ca78388cfd77	2119	unsigned long idletime_usec;
WiredHome	19:3f82c1161fd2	2120	void RegisterPerformance(method_e method);
WiredHome	19:3f82c1161fd2	2121	Timer performance;
WiredHome	19:3f82c1161fd2	2122	#endif
WiredHome	96:40b74dd3695b	2123
WiredHome	96:40b74dd3695b	2124	RetCode_t _printCallback(RA8875::filecmd_t cmd, uint8_t * buffer, uint16_t size);
WiredHome	96:40b74dd3695b	2125
WiredHome	96:40b74dd3695b	2126	FILE * _printFH; ///< PrintScreen file handle
WiredHome	96:40b74dd3695b	2127
WiredHome	96:40b74dd3695b	2128	RetCode_t privateCallback(filecmd_t cmd, uint8_t * buffer, uint16_t size) {
WiredHome	96:40b74dd3695b	2129	if (c_callback != NULL) {
WiredHome	96:40b74dd3695b	2130	return (*c_callback)(cmd, buffer, size);
WiredHome	96:40b74dd3695b	2131	}
WiredHome	96:40b74dd3695b	2132	else {
WiredHome	96:40b74dd3695b	2133	if (obj_callback != NULL && method_callback != NULL) {
WiredHome	96:40b74dd3695b	2134	return (obj_callback->*method_callback)(cmd, buffer, size);
WiredHome	96:40b74dd3695b	2135	}
WiredHome	96:40b74dd3695b	2136	}
WiredHome	96:40b74dd3695b	2137	return noerror;
WiredHome	96:40b74dd3695b	2138	}
WiredHome	96:40b74dd3695b	2139
WiredHome	96:40b74dd3695b	2140	RetCode_t (* c_callback)(filecmd_t cmd, uint8_t * buffer, uint16_t size);
WiredHome	96:40b74dd3695b	2141	FPointerDummy *obj_callback;
WiredHome	96:40b74dd3695b	2142	RetCode_t (FPointerDummy::method_callback)(filecmd_t cmd, uint8_t buffer, uint16_t size);
WiredHome	19:3f82c1161fd2	2143	};
WiredHome	19:3f82c1161fd2	2144
WiredHome	96:40b74dd3695b	2145
WiredHome	19:3f82c1161fd2	2146	//} // namespace
WiredHome	19:3f82c1161fd2	2147
WiredHome	19:3f82c1161fd2	2148	//using namespace SW_graphics;
WiredHome	19:3f82c1161fd2	2149
WiredHome	23:a50ded45dbaf	2150
WiredHome	23:a50ded45dbaf	2151	#ifdef TESTENABLE
WiredHome	23:a50ded45dbaf	2152	// ______________ ______________ ______________ _______________
WiredHome	23:a50ded45dbaf	2153	// /_____ _____/ / ___________/ / ___________/ /_____ ______/
WiredHome	23:a50ded45dbaf	2154	// / / / / / / / /
WiredHome	23:a50ded45dbaf	2155	// / / / /___ / /__________ / /
WiredHome	23:a50ded45dbaf	2156	// / / / ____/ /__________ / / /
WiredHome	23:a50ded45dbaf	2157	// / / / / / / / /
WiredHome	23:a50ded45dbaf	2158	// / / / /__________ ___________/ / / /
WiredHome	23:a50ded45dbaf	2159	// /__/ /_____________/ /_____________/ /__/
WiredHome	23:a50ded45dbaf	2160
WiredHome	23:a50ded45dbaf	2161	#include "WebColors.h"
WiredHome	23:a50ded45dbaf	2162	#include <algorithm>
WiredHome	23:a50ded45dbaf	2163
WiredHome	23:a50ded45dbaf	2164	extern "C" void mbed_reset();
WiredHome	23:a50ded45dbaf	2165
WiredHome	23:a50ded45dbaf	2166	/// This activates a small set of tests for the graphics library.
WiredHome	23:a50ded45dbaf	2167	///
WiredHome	23:a50ded45dbaf	2168	/// Call this API and pass it the reference to the display class.
WiredHome	23:a50ded45dbaf	2169	/// It will then run a series of tests. It accepts interaction via
WiredHome	23:a50ded45dbaf	2170	/// stdin to switch from automatic test mode to manual, run a specific
WiredHome	23:a50ded45dbaf	2171	/// test, or to exit the test mode.
WiredHome	23:a50ded45dbaf	2172	///
WiredHome	72:ecffe56af969	2173	/// @param[in] lcd is a reference to the display class.
WiredHome	72:ecffe56af969	2174	/// @param[in] pc is a reference to a serial interface, typically the USB to PC.
WiredHome	23:a50ded45dbaf	2175	///
WiredHome	23:a50ded45dbaf	2176	void RunTestSet(RA8875 & lcd, Serial & pc);
WiredHome	23:a50ded45dbaf	2177
WiredHome	23:a50ded45dbaf	2178
WiredHome	23:a50ded45dbaf	2179	// To enable the test code, uncomment this section, or copy the
WiredHome	23:a50ded45dbaf	2180	// necessary pieces to your "main()".
WiredHome	23:a50ded45dbaf	2181	//
WiredHome	23:a50ded45dbaf	2182	// #include "mbed.h"
WiredHome	23:a50ded45dbaf	2183	// #include "RA8875.h"
WiredHome	23:a50ded45dbaf	2184	// RA8875 lcd(p5, p6, p7, p12, NC, "tft"); // MOSI, MISO, SCK, /ChipSelect, /reset, name
WiredHome	23:a50ded45dbaf	2185	// Serial pc(USBTX, USBRX);
WiredHome	23:a50ded45dbaf	2186	// extern "C" void mbed_reset();
WiredHome	23:a50ded45dbaf	2187	// int main()
WiredHome	23:a50ded45dbaf	2188	// {
WiredHome	23:a50ded45dbaf	2189	// pc.baud(460800); // I like a snappy terminal, so crank it up!
WiredHome	23:a50ded45dbaf	2190	// pc.printf("\r\nRA8875 Test - Build " __DATE__ " " __TIME__ "\r\n");
WiredHome	23:a50ded45dbaf	2191	//
WiredHome	23:a50ded45dbaf	2192	// pc.printf("Turning on display\r\n");
WiredHome	101:e0aad446094a	2193	// lcd.init();
WiredHome	23:a50ded45dbaf	2194	// lcd.Reset();
WiredHome	23:a50ded45dbaf	2195	// lcd.Power(true); // display power is on, but the backlight is independent
WiredHome	23:a50ded45dbaf	2196	// lcd.Backlight(0.5);
WiredHome	23:a50ded45dbaf	2197	// RunTestSet(lcd, pc);
WiredHome	23:a50ded45dbaf	2198	// }
WiredHome	23:a50ded45dbaf	2199
WiredHome	23:a50ded45dbaf	2200	#endif // TESTENABLE
WiredHome	23:a50ded45dbaf	2201
WiredHome	56:7a85d226ad0d	2202	#endif

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	19 Mar 2017
Imports:	0
Forks:	0
Commits:	119
Dependents:	2
Dependencies:	1
Followers:	1

RA8875.h@102:fc60bfa0199f, 2016-01-23 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning