giuseppe russo / Mbed 2 deprecated HelloWorld_IPS01A1

Example application for using IPS01A1

Dependencies:   X_NUCLEO_IPS01A1 mbed

Files at this revision

API Documentation at this revision

Revision 0:79edd8d5fabd, committed 2015-11-26

Comitter:
grussian
Date:
Thu Nov 26 12:57:51 2015 +0000
Commit message:
First version of application example using X_NUCLEO_IPS01A1 library

Changed in this revision

X_NUCLEO_IPS01A1.lib Show annotated file Show diff for this revision Revisions of this file
main.cpp Show annotated file Show diff for this revision Revisions of this file
mbed.bld Show annotated file Show diff for this revision Revisions of this file 
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/X_NUCLEO_IPS01A1.lib	Thu Nov 26 12:57:51 2015 +0000
@@ -0,0 +1,1 @@
+http://developer.mbed.org/teams/ST-Expansion-SW-Team/code/X_NUCLEO_IPS01A1/#0b969942e09f

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Thu Nov 26 12:57:51 2015 +0000
@@ -0,0 +1,300 @@
+/**
+ ******************************************************************************
+ * @file    main.cpp
+ * @author  APG Mass Market
+ * @version V1.0.1
+ * @date    16-Nov-2015
+ * @brief   Example application for using the X_NUCLEO_IPS01A1 
+ *          Intelligent Power Switch Nucleo expansion board.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *   1. Redistributions of source code must retain the above copyright notice,
+ *      this list of conditions and the following disclaimer.
+ *   2. Redistributions in binary form must reproduce the above copyright notice,
+ *      this list of conditions and the following disclaimer in the documentation
+ *      and/or other materials provided with the distribution.
+ *   3. Neither the name of STMicroelectronics nor the names of its contributors
+ *      may be used to endorse or promote products derived from this software
+ *      without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ *  SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/ 
+
+/**
+ * @mainpage X_NUCLEO_IPS01A1 Intelligent Power Switch Nucleo Expansion Board Firmware Package
+ *
+ * <b>Introduction</b>
+ *
+ * This firmware package includes Components Device Drivers, Board Support Package
+ * and example application for STMicroelectronics X_NUCLEO_IPS01A1 Intelligent Power Switch
+ * Nucleo Expansion Board
+ * 
+ * <b>Example Application</b>
+ *
+ */
+/*** Includes ----------------------------------------------------------------- ***/
+#include "mbed.h"
+#include "assert.h"
+#include "x_nucleo_ips01a1.h"
+
+/*** Static variables --------------------------------------------------------- ***/
+#ifdef DBG_MCU
+#include "DbgMCU.h"
+static DbgMCU enable_dbg;
+#endif // DBG_MCU
+
+/* HW settings */
+/* Pay attention before changing HW settings, they must be coherent with you HW design */
+/* Power Switch Connection to Arduino connectors */
+#define IPS01A1_PIN_IN_0          (D5)
+#define IPS01A1_PIN_IN_1          (D6)
+#define IPS01A1_PIN_SEL_0         (D14)
+#define IPS01A1_PIN_SEL_1         (D15)
+#define IPS01A1_PIN_S_EN          (D2)
+#define IPS01A1_PIN_FAULT_RST     (D4)
+#define IPS01A1_PIN_MULTISENSE    (A2)
+#define IPS01A1_PIN_V_GND         (A4)
+
+/* V-Ref */
+#define V_REF 3.3
+/* Rsense Value */
+#define R_SENSE 1e3
+/* R_D1 */
+#define R_D1 15e3
+/* R_D2 */
+#define R_D2 30e3
+
+/* End of HW settings */
+
+static X_NUCLEO_IPS01A1 &ips_expansion_board = X_NUCLEO_IPS01A1::Instance(IPS01A1_PIN_IN_0,
+                                                                          IPS01A1_PIN_IN_1,
+                                                                          IPS01A1_PIN_SEL_0, 
+                                                                          IPS01A1_PIN_SEL_1,
+                                                                          IPS01A1_PIN_S_EN,
+                                                                          IPS01A1_PIN_FAULT_RST,
+                                                                          IPS01A1_PIN_MULTISENSE,
+                                                                          IPS01A1_PIN_V_GND, 
+                                                                          V_REF,
+                                                                          R_SENSE,
+                                                                          R_D1,
+                                                                          R_D2);
+
+
+
+static Ticker ticker;
+DigitalOut UserLed(LED1);    
+
+/*** Main function ------------------------------------------------------------- ***/
+/* Generic main function/loop, interrupt based cyclic execution
+*/
+
+float Multisense_Signal = 0;    // Multisense pin - signal level
+float V_GND_Signal = 0;         // GND pin - signal level
+float Temp_Signal = 0;          // Device temperature (info from Device)
+float Vcc_Level = 0;            // Vcc signal level (info from device)
+bool ButtonPressed = 0;         // User Button
+int TestSequence = 0;           // Test sequence counter
+
+//------------------------------------
+// Hyperterminal configuration
+// 9600 bauds, 8-bit data, no parity
+//------------------------------------
+
+InterruptIn UserButton(USER_BUTTON);  // B1 is the User Button
+void B1_pressed (void);
+void LedBlink (int TestSequence);
+void Write_Serial (void);
+
+
+int main(void){
+    UserButton.fall(&B1_pressed);       //interrupt User Button
+    printf("Start test Procedure \n\n\n");
+    
+    while (true) {
+        // wait for User button is pressed 
+        while (!ButtonPressed) {
+        }
+           
+        ButtonPressed = 0;
+        
+        LedBlink(TestSequence);
+     
+        switch (TestSequence) {
+          case (1): {
+            printf("Test 1: StandBy\n\r");
+            ips_expansion_board.vps220h1.In_0= 0;
+            ips_expansion_board.vps220h1.In_1 = 0;
+            ips_expansion_board.vps220h1.Sel_0 =0;
+            ips_expansion_board.vps220h1.Sel_1 =0;
+            ips_expansion_board.vps220h1.S_En = 0;
+            ips_expansion_board.vps220h1.FaultRST = 0;
+            wait (0.1);
+            Multisense_Signal= ips_expansion_board.GetCurrent(0);
+            Write_Serial();
+            printf("Current Ch1 (stand by)= %2.3fA \n\n\r", Multisense_Signal);
+           }
+           break;
+          case(2):{
+            printf("Test 2: Temperature\n\r");
+            ips_expansion_board.vps220h1.In_0= 0;
+            ips_expansion_board.vps220h1.In_1 = 0;
+            ips_expansion_board.vps220h1.Sel_0 =0;
+            ips_expansion_board.vps220h1.Sel_1 =1;
+            ips_expansion_board.vps220h1.S_En = 1;
+            ips_expansion_board.vps220h1.FaultRST = 0;
+            wait (0.1); 
+      
+            Temp_Signal= ips_expansion_board.GetTemperature();
+            Write_Serial();
+            printf("Temperature (equiv)= %2.3fC \n\n\r", Temp_Signal);
+             
+          }
+          break;
+          case(3):{
+            printf("Test 3: Vcc Level\n\r");
+            ips_expansion_board.vps220h1.In_0= 0;
+            ips_expansion_board.vps220h1.In_1 = 0;
+            ips_expansion_board.vps220h1.Sel_0 =1;
+            ips_expansion_board.vps220h1.Sel_1 =1;
+            ips_expansion_board.vps220h1.S_En = 1;
+            ips_expansion_board.vps220h1.FaultRST = 0;
+            wait (0.1); 
+            Vcc_Level= ips_expansion_board.GetVcc();
+            Write_Serial();
+            printf("Vcc= %2.3fV \n\n\r", Vcc_Level);
+          }
+          break;
+          case(4):{
+            printf("Test 4: Ch1=ON, CH2=OFF\n\r");
+            ips_expansion_board.vps220h1.In_0= 1;
+            ips_expansion_board.vps220h1.In_1 = 0;
+            ips_expansion_board.vps220h1.Sel_0 =0;
+            ips_expansion_board.vps220h1.Sel_1 =0;
+            ips_expansion_board.vps220h1.S_En = 1;
+            ips_expansion_board.vps220h1.FaultRST = 0;
+            wait (0.1);
+            Write_Serial();
+            printf("Current Ch1= %2.3fA \n\n\r",ips_expansion_board.GetCurrent(1) );
+            wait (.5);
+            ips_expansion_board.vps220h1.In_0= 0;
+            ips_expansion_board.vps220h1.In_1 = 0;
+          }
+          break;
+          case(5):{
+            printf("Test 5: Ch1=OFF, CH2=ON\n\r");
+            ips_expansion_board.vps220h1.In_0= 0;
+            ips_expansion_board.vps220h1.In_1 = 1;
+            ips_expansion_board.vps220h1.Sel_0 =1;
+            ips_expansion_board.vps220h1.Sel_1 =0;
+            ips_expansion_board.vps220h1.S_En = 1;
+            ips_expansion_board.vps220h1.FaultRST = 0;
+            wait (0.1);
+            Write_Serial();
+            printf("Current Ch1= %2.3fA \n\n\r",ips_expansion_board.GetCurrent(0));
+            wait (.5);
+            ips_expansion_board.vps220h1.In_0= 0;
+            ips_expansion_board.vps220h1.In_1 = 0;
+           }
+          break;
+          case(6):{
+            printf("Test 6: Ch1=ON, CH2=ON -- Current Ch1\n\r");
+            ips_expansion_board.vps220h1.In_0= 1;
+            ips_expansion_board.vps220h1.In_1 = 1;
+            ips_expansion_board.vps220h1.Sel_0 =0;
+            ips_expansion_board.vps220h1.Sel_1 =0;
+            ips_expansion_board.vps220h1.S_En = 1;
+            ips_expansion_board.vps220h1.FaultRST = 0;
+            wait (0.1);
+            Write_Serial();
+            printf("Current Ch1= %2.3fA \n\n\r", ips_expansion_board.GetCurrent(0) );
+            wait (.5);
+            ips_expansion_board.vps220h1.In_0= 0;
+            ips_expansion_board.vps220h1.In_1 = 0;
+              
+          }
+          break;
+          case(7):{
+            printf("Test 7: Ch1=ON, CH2=ON -- Current Ch2\n\r");
+            ips_expansion_board.vps220h1.In_0= 1;
+            ips_expansion_board.vps220h1.In_1 = 1;
+            ips_expansion_board.vps220h1.Sel_0 =1;
+            ips_expansion_board.vps220h1.Sel_1 =0;
+            ips_expansion_board.vps220h1.S_En = 1;
+            ips_expansion_board.vps220h1.FaultRST = 0;
+            wait (0.1);
+            Write_Serial();
+            printf("Current Ch2= %2.3fA \n\n\r", ips_expansion_board.GetCurrent(1));
+            wait (.5);
+            ips_expansion_board.vps220h1.In_0= 0;
+            ips_expansion_board.vps220h1.In_1 = 0;
+             
+          }
+          break;
+          default: {
+            printf("End Test Procedure\n\n\n\r");  
+            TestSequence = 0;
+            ips_expansion_board.vps220h1.In_0= 0;
+            ips_expansion_board.vps220h1.In_1 = 0;
+            ips_expansion_board.vps220h1.Sel_0 =0;
+            ips_expansion_board.vps220h1.Sel_1 =0;
+            ips_expansion_board.vps220h1.S_En = 0;
+            ips_expansion_board.vps220h1.FaultRST = 0;
+           }
+          break;
+        }      
+    }
+    
+ }
+
+
+void B1_pressed (){
+  // Interrupt procedure - User button is pressed
+    TestSequence ++;
+
+    UserLed = 1; // LED is ON
+    wait(0.05); // 50 ms
+    UserLed = 0; // LED is OFF
+
+    ButtonPressed = 1;
+
+}
+void LedBlink (int TestSequence){
+// Option feedback by usingUser LED
+    for (int TestCounter =0; TestCounter<TestSequence; TestCounter++) {
+        UserLed = 1; // LED is ON
+        wait(0.05); // 50 ms
+        UserLed = 0; // LED is OFF
+        wait(0.05); // 50 msec
+    }
+    wait(1-(TestSequence*2*0.05));
+}
+
+void Write_Serial (){
+// This code send messages and data to the serial port
+    // send info to serial port
+    printf("Input 0= %d\t", ips_expansion_board.vps220h1.In_0.read());
+    printf("Input 1= %d\t", ips_expansion_board.vps220h1.In_1.read());
+    printf("SEL 0= %d\t", ips_expansion_board.vps220h1.Sel_0.read());
+    printf("SEL 1= %d\t", ips_expansion_board.vps220h1.Sel_1.read());
+    printf("SEL_EN= %d\t", ips_expansion_board.vps220h1.S_En.read());
+    printf("FaultRST= %d\t", ips_expansion_board.vps220h1.FaultRST.read());
+ }
+
+
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Thu Nov 26 12:57:51 2015 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/165afa46840b
\ No newline at end of file