![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
bae integrated final (may be)
Fork of BAE_FRDMTESIN2 by
main.cpp
- Committer:
- greenroshks
- Date:
- 2014-12-15
- Revision:
- 8:667fbc82d634
- Parent:
- 7:f06840d848e3
File content as of revision 8:667fbc82d634:
#include "mbed.h" #include "rtos.h" #include "HK.h" #include "slave.h" #include "beacon.h" #include "ACS.h" #include "fault.h" #define DEFAULT_POW_MODE 0 //power mode initialization Serial pc(USBTX, USBRX); Timer t; //To know the time of execution each thread Timer t1; //To know the time of entering of each thread Thread *ptr_t_hk; //every 20 seconds Thread *ptr_t_acs; //every 10 seconds //Thread *ptr_t_acs_write2flash; Thread *ptr_t_bea; //every 30 seconds //Thread *ptr_t_bea_telecommand; //Thread *ptr_t_fault; //will be taken care by HK thread and interrupts Thread *ptr_t_i2c; //for interprocessor communication Thread *ptr_t_exec_tc; //Taking data from i2c mail box and execute the stuff //-------------------------------------------------------------------------------------------------------------------------------------------------- //TASK 2 : HK //-------------------------------------------------------------------------------------------------------------------------------------------------- extern SensorData Sensor; void t_hk(void const *args) { Sensor.power_mode = DEFAULT_POW_MODE; while(1) { Thread::signal_wait(0x2); printf("\nTHIS IS HK %f\n",t1.read()); //t.start(); FAULTS(); POWER(Sensor.power_mode); FUNC_HK_MAIN(); //Collecting HK data //thread_2.signal_set(0x4); // FUNC_I2C_SLAVE_MAIN(24); //Put HK data to I2C thread instead // t.stop(); //printf("The time to execute hk_acq is %f seconds\n",t.read()); //t.reset(); } } //--------------------------------------------------------------------------------------------------------------------------------------- //TASK 1 : ACS //--------------------------------------------------------------------------------------------------------------------------------------- /*typedef struct { float mag_field; float omega; } sensor_data; */ //Mail <sensor_data, 16> q_acs; //Will be taken care of by HK structure every 20 seconds /*void func_acs_readdata(sensor_data *ptr) { printf("Reading the data\n"); ptr -> mag_field = 10; ptr -> omega = 3; } void func_acs_ctrlalgo() { printf("Executing control algo\n"); } void func_acs_write2flash(sensor_data *ptr2) { printf("The magnetic field is %.2f T\n\r",ptr2->mag_field); printf("The angular velocity is %.2f rad/s\n\r",ptr2->omega); }*/ int acs_pflag = 1; //for executing acs power modes void t_acs(void const *args) { float *mag_field; float *omega; float *moment; while(1) { Thread::signal_wait(0x1); printf("\nTHIS IS ACS %f\n",t1.read()); // t.start(); // sensor_data *ptr = q_acs.alloc(); //done by HK instead //func_acs_readda=ta(ptr); mag_field= FUNC_ACS_MAG_EXEC(); //actual execution omega = FUNC_ACS_EXEC_GYR(); //q_acs.put(ptr); //done by HK if(acs_pflag == 1) //for the respective power mode { moment = FUNC_ACS_CNTRLALGO(mag_field,omega); FUNC_ACS_GENPWM(moment); //Generating PWM signal. } //t.reset(); } } /*void t_acs_write2flash(void const *args) //unwanted thread { while(1) { //printf("Writing in the flash\n"); osEvent evt = q_acs.get(); if(evt.status == osEventMail) { sensor_data *ptr = (sensor_data*)evt.value.p; func_acs_write2flash(ptr); q_acs.free(ptr); } printf("Writing acs data in the flash\n"); } }*/ //---------------------------------------------------BEACON-------------------------------------------------------------------------------------------- int beac_flag=0; //To receive telecommand from ground. /*void t_bea_telecommand(void const *args) //taken care of by t_exec_tc { char c = pc.getc(); if(c=='a') { printf("Telecommand detected\n"); beac_flag=1; } } */ void t_bea(void const *args) { while(1) { Thread::signal_wait(0x3); printf("\nTHIS IS BEACON %f\n",t1.read()); //t.start(); FUNC_BEA(); /*if(beac_flag==1) //beacon standby can be doe to { Thread::wait(600000); beac_flag = 0; }*/ //printf("The time to execute beacon thread is %f seconds\n",t.read()); //t.reset(); } } //--------------------------------------------------------------------------------------------------------------------------------------------------- //TASK 4 : FAULT MANAGEMENT //--------------------------------------------------------------------------------------------------------------------------------------------------- //Dummy fault rectifier functions /*Mail<int,16> faults; void FUNC_FAULT_FUNCT1() { printf("\nFault 1 detected... \n"); } void FUNC_FAULT_FUNCT2() { printf("\nFault 2 detected...\n"); } void T_FAULT(void const *args) { while(1) { osEvent evt = faults.get(); if(evt.status==osEventMail) { int *fault_id= (int *)evt.value.p; switch(*fault_id) { case 1: FUNC_FAULT_FUNCT1(); break; case 2: FUNC_FAULT_FUNCT2(); break; } faults.free(fault_id); } } }*/ /* void T_FAULT(void const *args) { Sensor.power_mode='0'; while(1) { Thread :: signal_wait(0x2); FAULTS(); POWER(Sensor.power_mode); //Sensor.power_mode++; //testing ... should be removed } } */ //------------------------------------------------------------------------------------------------------------------------------------------------ //SCHEDULER //------------------------------------------------------------------------------------------------------------------------------------------------ int beacon_sc = 3; uint16_t schedcount=1; void t_sc(void const *args) { printf("The value of i in scheduler is %d\n",schedcount); if(schedcount == 65532) //to reset the counter { schedcount = 0; } if(schedcount%1==0) { ptr_t_acs -> signal_set(0x1); } if(schedcount%2==0) { // ptr_t_fault -> signal_set(0x2); ptr_t_hk -> signal_set(0x2); } if(schedcount%beacon_sc==0) { if(beac_flag==0) { ptr_t_bea -> signal_set(0x3); } } schedcount++; } //--------------------------------------------------------------------------------------------------------------------------------------------- int main() { t1.start(); ptr_t_hk = new Thread(t_hk); ptr_t_acs = new Thread(t_acs); //ptr_t_acs_write2flash = new Thread(t_acs_write2flash); ptr_t_bea = new Thread(t_bea); //ptr_t_bea_telecommand = new Thread(t_bea_telecommand); //ptr_t_fault = new Thread(T_FAULT); //ptr_t_sc = new Thread(t_sc); // ptr_t_fault -> set_priority(osPriorityRealtime); ptr_t_acs->set_priority(osPriorityHigh); ptr_t_hk->set_priority(osPriorityNormal); //ptr_t_acs_write2flash->set_priority(osPriorityBelowNormal); ptr_t_bea->set_priority(osPriorityAboveNormal); //ptr_t_bea_telecommand->set_priority(osPriorityIdle); //ptr_t_sc->set_priority(osPriorityAboveNormal); // ---------------------------------------------------------------------------------------------- //printf("\n T_FAULT priority is %d",ptr_t_fault->get_priority()); printf("\n T_ACS priority is %d",ptr_t_acs->get_priority()); printf("\n T_HK_ACQ priority is %d",ptr_t_hk->get_priority()); //printf("\n T_ACS_WRITE2FLASH priority is %d",ptr_t_acs_write2flash->get_priority()); printf("\n T_BEA priority is %d",ptr_t_bea->get_priority()); RtosTimer t_sc_timer(t_sc,osTimerPeriodic); t_sc_timer.start(10000); printf("\n%f\n",t1.read()); while(1) { Thread::wait(10000); ; } }