Diff: targets/hal/TARGET_NXP/TARGET_LPC23XX/gpio_api.c

Revision:

13:0645d8841f51

Parent:

10:3bc89ef62ce7

Child:

113:65a335a675de

diff -r 5fa2273de5db -r 0645d8841f51 targets/hal/TARGET_NXP/TARGET_LPC23XX/gpio_api.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC23XX/gpio_api.c	Mon Aug 05 14:12:34 2013 +0300
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "gpio_api.h"
+#include "pinmap.h"
+
+uint32_t gpio_set(PinName pin) {
+    LPC_SC->SCS |= 1; // High speed GPIO is enabled on ports 0 and 1
+    
+    pin_function(pin, 0);
+    
+    return (1 << ((int)pin & 0x1F));
+}
+
+void gpio_init(gpio_t *obj, PinName pin, PinDirection direction) {
+    if (pin == NC) return;
+    
+    obj->pin = pin;
+    obj->mask = gpio_set(pin);
+    
+    LPC_GPIO_TypeDef *port_reg = (LPC_GPIO_TypeDef *) ((int)pin & ~0x1F);
+    
+    obj->reg_set = &port_reg->FIOSET;
+    obj->reg_clr = &port_reg->FIOCLR;
+    obj->reg_in  = &port_reg->FIOPIN;
+    obj->reg_dir = &port_reg->FIODIR;
+    
+    gpio_dir(obj, direction);
+    switch (direction) {
+        case PIN_OUTPUT: pin_mode(pin, PullNone); break;
+        case PIN_INPUT : pin_mode(pin, PullDown); break;
+    }
+}
+
+void gpio_mode(gpio_t *obj, PinMode mode) {
+    pin_mode(obj->pin, mode);
+}
+
+void gpio_dir(gpio_t *obj, PinDirection direction) {
+    switch (direction) {
+        case PIN_INPUT : *obj->reg_dir &= ~obj->mask; break;
+        case PIN_OUTPUT: *obj->reg_dir |=  obj->mask; break;
+    }
+}