Diff: targets/hal/TARGET_Freescale/TARGET_KL05Z/PinNames.h

Revision:

82:0b31dbcd4769

Parent:

81:a9456fdf72fa

Child:

83:5a6f638110fe

--- a/targets/hal/TARGET_Freescale/TARGET_KL05Z/PinNames.h	Fri Jan 31 09:00:05 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,129 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
-    PIN_INPUT,
-    PIN_OUTPUT
-} PinDirection;
-
-/* PCR - 0x1000 */
-#define PORT_SHIFT  12
-
-typedef enum {
-    PTA0 = 0x0,
-    PTA1 = 0x4,
-    PTA2 = 0x8,
-    PTA3 = 0xc,
-    PTA4 = 0x10,
-    PTA5 = 0x14,
-    PTA6 = 0x18,
-    PTA7 = 0x1c,
-    PTA8 = 0x20,
-    PTA9 = 0x24,
-    PTA10 = 0x28,
-    PTA11 = 0x2c,
-    PTA12 = 0x30,
-    PTA13 = 0x34,
-    PTA14 = 0x38,
-    PTA15 = 0x3c,
-    PTA16 = 0x40,
-    PTA17 = 0x44,
-    PTA18 = 0x48,
-    PTA19 = 0x4c,
-    PTB0 = 0x1000,
-    PTB1 = 0x1004,
-    PTB2 = 0x1008,
-    PTB3 = 0x100c,
-    PTB4 = 0x1010,
-    PTB5 = 0x1014,
-    PTB6 = 0x1018,
-    PTB7 = 0x101c,
-    PTB8 = 0x1020,
-    PTB9 = 0x1024,
-    PTB10 = 0x1028,
-    PTB11 = 0x102c,
-    PTB12 = 0x1030,
-    PTB13 = 0x1034,
-    PTB14 = 0x1038,
-    PTB15 = 0x103c,
-    PTB16 = 0x1040,
-    PTB17 = 0x1044,
-    PTB18 = 0x1048,
-    PTB19 = 0x104c,
-    PTB20 = 0x1050,
-
-    LED_RED   = PTB8,
-    LED_GREEN = PTB9,
-    LED_BLUE  = PTB10,
-
-    // mbed original LED naming
-    LED1 = LED_BLUE,
-    LED2 = LED_GREEN,
-    LED3 = LED_RED,
-    LED4 = LED_RED,
-
-    // USB Pins
-    USBTX = PTB1,
-    USBRX = PTB2,
-
-    // Arduino Headers
-    D0 = PTB2,
-    D1 = PTB1,
-    D2 = PTA11,
-    D3 = PTB5,
-    D4 = PTA10,
-    D5 = PTA12,
-    D6 = PTB6,
-    D7 = PTB7,
-    D8 = PTA10,
-    D9 = PTB11,
-    D10 = PTA5,
-    D11 = PTA7,
-    D12 = PTA6,
-    D13 = PTB0,
-    D14 = PTB4,
-    D15 = PTB3,
-
-    A0 = PTB8,
-    A1 = PTB9,
-    A2 = PTA8,
-    A3 = PTA0,
-    A4 = PTA9,
-    A5 = PTB13,
-
-    // Not connected
-    NC = (int)0xFFFFFFFF
-} PinName;
-
-/* PullDown not available for KL05 */
-typedef enum {
-    PullNone = 0,
-    PullUp   = 2,
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif