mehmet gok
Source code for Maxim Sensor Hub Communications. Mostly C library for MAX32664 sensor hub communications.
Diff: SHComm.h
- Revision:
- 0:23dade9a66bf
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SHComm.h Mon Dec 17 07:56:04 2018 +0000
@@ -0,0 +1,625 @@
+/*******************************************************************************
+ * Copyright (C) 2018 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef SOURCE_SHCOMM_H_
+#define SOURCE_SHCOMM_H_
+
+/*
+#ifdef __cplusplus
+extern "C" {
+#endif
+*/
+
+// Sensor/Algo indicies
+#define SH_SENSORIDX_MAX8614X 0x00
+#define SH_SENSORIDX_MAX30205 0x01
+#define SH_SENSORIDX_MAX30001 0x02
+#define SH_SENSORIDX_MAX30101 0x03
+#define SH_SENSORIDX_ACCEL 0x04
+#define SH_NUM_CURRENT_SENSORS 5
+
+#define SH_ALGOIDX_AGC 0x00
+#define SH_ALGOIDX_AEC 0x01
+#define SH_ALGOIDX_WHRM 0x02
+#define SH_ALGOIDX_ECG 0x03
+#define SH_ALGOIDX_BPT 0x04
+#define SH_ALGOIDX_WSPO2 0x05
+#define SH_NUM_CURRENT_ALGOS 6
+
+#define PADDING_BYTE (0xEE)
+#define DATA_BYTE (0xED)
+
+
+#define SS_I2C_8BIT_SLAVE_ADDR 0xAA
+#define SS_DEFAULT_CMD_SLEEP_MS 2
+#define SS_DUMP_REG_SLEEP_MS 100
+#define SS_ENABLE_SENSOR_SLEEP_MS 20
+
+#define SH_INPUT_DATA_DIRECT_SENSOR 0x00
+#define SH_INPUT_DATA_FROM_HOST 0x01
+
+#define SS_FAM_R_STATUS 0x00
+ #define SS_CMDIDX_STATUS 0x00
+ #define SS_SHIFT_STATUS_ERR 0
+ #define SS_MASK_STATUS_ERR (0x07 << SS_SHIFT_STATUS_ERR)
+ #define SS_SHIFT_STATUS_DATA_RDY 3
+ #define SS_MASK_STATUS_DATA_RDY (1 << SS_SHIFT_STATUS_DATA_RDY)
+ #define SS_SHIFT_STATUS_FIFO_OUT_OVR 4
+ #define SS_MASK_STATUS_FIFO_OUT_OVR (1 << SS_SHIFT_STATUS_FIFO_OUT_OVR)
+ #define SS_SHIFT_STATUS_FIFO_IN_OVR 5
+ #define SS_MASK_STATUS_FIFO_IN_OVR (1 << SS_SHIFT_STATUS_FIFO_IN_OVR)
+
+ #define SS_SHIFT_STATUS_LOG_OVR 6
+ #define SS_MASK_STATUS_LOG_OVR (1 << SS_SHIFT_STATUS_LOG_OVR)
+
+ #define SS_SHIFT_STATUS_LOG_RDY 7
+ #define SS_MASK_STATUS_LOG_RDY (1 << SS_SHIFT_STATUS_LOG_RDY)
+
+
+
+#define SS_FAM_W_MODE 0x01
+#define SS_FAM_R_MODE 0x02
+ #define SS_CMDIDX_MODE 0x00
+ #define SS_SHIFT_MODE_SHDN 0
+ #define SS_MASK_MODE_SHDN (1 << SS_SHIFT_MODE_SHDN)
+ #define SS_SHIFT_MODE_RESET 1
+ #define SS_MASK_MODE_RESET (1 << SS_SHIFT_MODE_RESET)
+ #define SS_SHIFT_MODE_FIFORESET 2
+ #define SS_MASK_MODE_FIFORESET (1 << SS_SHIFT_MODE_FIFORESET)
+ #define SS_SHIFT_MODE_BOOTLDR 3
+ #define SS_MASK_MODE_BOOTLDR (1 << SS_SHIFT_MODE_BOOTLDR)
+
+/*MYG*/
+#define SH_MODE_REQUEST_RET_BYTES (2)
+#define SH_MODE_REQUEST_DELAY (2)
+#define SH_STATUS_REQUEST_RET_BYTES (2)
+#define SH_STATUS_REQUEST_DELAY (2)
+
+
+
+#define SS_I2C_READ 0x03
+
+#define SS_FAM_W_COMMCHAN 0x10
+#define SS_FAM_R_COMMCHAN 0x11
+ #define SS_CMDIDX_OUTPUTMODE 0x00
+ #define SS_SHIFT_OUTPUTMODE_DATATYPE 0
+ #define SS_MASK_OUTPUTMODE_DATATYPE (0x03 << SS_SHIFT_OUTPUTMODE_DATATYPE)
+ #define SS_DATATYPE_PAUSE 0
+ #define SS_DATATYPE_RAW 1
+ #define SS_DATATYPE_ALGO 2
+ #define SS_DATATYPE_BOTH 3
+ #define SS_SHIFT_OUTPUTMODE_SC_EN 2
+ #define SS_MASK_OUTPUTMODE_SC_EN (1 << SS_SHIFT_OUTPUTMODE_SC_EN)
+ #define SS_CMDIDX_FIFOAFULL 0x01
+
+#define SS_FAM_R_OUTPUTFIFO 0x12
+ #define SS_CMDIDX_OUT_NUMSAMPLES 0x00
+ #define SS_CMDIDX_READFIFO 0x01
+
+#define SS_FAM_R_INPUTFIFO 0x13
+ #define SS_CMDIDX_SAMPLE_SIZE 0x00
+ #define SS_CMDIDX_INPUT_FIFO_SIZE 0x01
+ #define SS_CMDIDX_SENSOR_FIFO_SIZE 0x02
+ #define SS_CMDIDX_NUM_SAMPLES_SENSOR_FIFO 0x03
+ #define SS_CMDIDX_NUM_SAMPLES_INPUT_FIFO 0x04
+
+#define SS_FAM_W_INPUTFIFO 0x14
+ #define SS_CMDIDN_WRITEFIFO 0x00
+ #define SS_CMDIDX_WRITE_FIFO 0x00
+
+#define SS_FAM_W_WRITEREG 0x40
+#define SS_FAM_R_READREG 0x41
+#define SS_FAM_R_REGATTRIBS 0x42
+#define SS_FAM_R_DUMPREG 0x43
+
+#define SS_FAM_W_SENSORMODE 0x44
+#define SS_FAM_R_SENSORMODE 0x45
+
+//TODO: Fill in known configuration parameters
+#define SS_FAM_W_ALGOCONFIG 0x50
+#define SS_FAM_R_ALGOCONFIG 0x51
+ #define SS_CFGIDX_AGC_TARGET 0x00
+ #define SS_CFGIDX_AGC_CORR_COEFF 0x01
+ #define SS_CFGIDX_AGC_SENSITIVITY 0x02
+ #define SS_CFGIDX_AGC_SMP_AVG 0x03
+
+ #define SS_CFGIDX_WHRM_SR 0x00
+ #define SS_CFGIDX_WHRM_MAX_HEIGHT 0x01
+ #define SS_CFGIDX_WHRM_MAX_WEIGHT 0x02
+ #define SS_CFGIDX_WHRM_MAX_AGE 0x03
+ #define SS_CFGIDX_WHRM_MIN_HEIGHT 0x04
+ #define SS_CFGIDX_WHRM_MIN_WEIGHT 0x05
+ #define SS_CFGIDX_WHRM_MIN_AGE 0x06
+ #define SS_CFGIDX_WHRM_DEF_HEIGHT 0x07
+ #define SS_CFGIDX_WHRM_DEF_WEIGHT 0x08
+ #define SS_CFGIDX_WHRM_DEF_AGE 0x09
+ #define SS_CFGIDX_WHRM_INIT_HR 0x0A
+
+ #define SS_CFGIDX_BP_USE_MED 0x00
+ #define SS_CFGIDX_BP_SYS_BP_CAL 0x01
+ #define SS_CFGIDX_BP_DIA_BP_CAL 0x02
+ #define SS_CFGIDX_BP_CAL_DATA 0x03
+ #define SS_CFGIDX_BP_EST_DATE 0x04
+ #define SS_CFGIDX_BP_EST_NONREST 0x05
+
+#define SS_FAM_W_ALGOMODE 0x52
+#define SS_FAM_R_ALGOMODE 0x53
+
+#define SS_FAM_W_EXTERNSENSORMODE 0x60
+#define SS_FAM_R_EXTERNSENSORMODE 0x61
+
+#define SS_FAM_R_SELFTEST 0x70
+
+#define SS_FAM_W_BOOTLOADER 0x80
+ #define SS_CMDIDX_SETIV 0x00
+ #define SS_CMDIDX_SETAUTH 0x01
+ #define SS_CMDIDX_SETNUMPAGES 0x02
+ #define SS_CMDIDX_ERASE 0x03
+ #define SS_CMDIDX_SENDPAGE 0x04
+ #define SS_CMDIDX_ERASE_PAGE 0x05
+#define SS_FAM_R_BOOTLOADER 0x81
+ #define SS_CMDIDX_BOOTFWVERSION 0x00
+ #define SS_CMDIDX_PAGESIZE 0x01
+
+#define SS_FAM_W_BOOTLOADER_CFG 0x82
+#define SS_FAM_R_BOOTLOADER_CFG 0x83
+ #define SS_CMDIDX_BL_SAVE 0x00
+ #define SS_CMDIDX_BL_ENTRY 0x01
+ #define SS_BL_CFG_ENTER_BL_MODE 0x00
+ #define SS_BL_CFG_EBL_PIN 0x01
+ #define SS_BL_CFG_EBL_POL 0x02
+ #define SS_CMDIDX_BL_EXIT 0x02
+ #define SS_BL_CFG_EXIT_BL_MODE 0x00
+ #define SS_BL_CFG_TIMEOUT 0x01
+
+/* Enable logging/debugging */
+#define SS_FAM_R_LOG 0x90
+ #define SS_CMDIDX_R_LOG_DATA 0x00
+ #define SS_CMDIDX_R_LOG_LEN 0x01
+
+ #define SS_CMDIDX_R_LOG_LEVEL 0x02
+ #define SS_LOG_DISABLE 0x00
+ #define SS_LOG_CRITICAL 0x01
+ #define SS_LOG_ERROR 0x02
+ #define SS_LOG_INFO 0x04
+ #define SS_LOG_DEBUG 0x08
+
+#define SS_FAM_W_LOG_CFG 0x91
+ #define SS_CMDIDX_LOG_GET_LEVEL 0x00
+ #define SS_CMDIDX_LOG_SET_LEVEL 0x01
+
+#define SS_FAM_R_IDENTITY 0xFF
+ #define SS_CMDIDX_PLATTYPE 0x00
+ #define SS_CMDIDX_PARTID 0x01
+ #define SS_CMDIDX_REVID 0x02
+ #define SS_CMDIDX_FWVERSION 0x03
+ #define SS_CMDIDX_AVAILSENSORS 0x04
+ #define SS_CMDIDX_DRIVERVER 0x05
+ #define SS_CMDIDX_AVAILALGOS 0x06
+ #define SS_CMDIDX_ALGOVER 0x07
+
+
+/* Newly added ones; checko for collosion or repeats with the ones above */
+#define SS_RESET_TIME 10
+#define SS_STARTUP_TO_BTLDR_TIME 20
+#define SS_STARTUP_TO_MAIN_APP_TIME 1000
+
+#define SS_MAX_SUPPORTED_SENSOR_NUM 0xFE
+#define SS_MAX_SUPPORTED_ALGO_NUM 0xFE
+
+#define SS_APPPLICATION_MODE 0x00
+#define SS_BOOTLOADER_MODE 0x08
+
+typedef enum {
+ SS_SUCCESS =0x00,
+ SS_ERR_COMMAND =0x01,
+ SS_ERR_UNAVAILABLE =0x02,
+ SS_ERR_DATA_FORMAT =0x03,
+ SS_ERR_INPUT_VALUE =0x04,
+ SS_ERR_BTLDR_GENERAL =0x80,
+ SS_ERR_BTLDR_CHECKSUM =0x81,
+ SS_ERR_TRY_AGAIN =0xFE,
+ SS_ERR_UNKNOWN =0xFF,
+
+} SS_STATUS;
+
+
+
+/* ***************************************************************************************** *
+ * *
+ * SENSOR HUB COMMUNICATION INTERFACE ( Defined in MAX32664 User Guide ) API FUNCTIONS *
+ * *
+ * *
+ * ***************************************************************************************** */
+
+
+/**
+* @brief Func to write to sensor hub via sending generic command byte sequences
+*
+* @param[in] tx_buf - command byte sequence
+* @param[in] tx_len - command byte sequence length in bytes
+* @param[in] sleep_ms - time to wait for sensor hub to report statuss
+*
+* @return 1 byte status: 0x00 (SS_SUCCESS) on success
+*/
+int sh_write_cmd( uint8_t *tx_buf,
+ int tx_len,
+ int sleep_ms );
+
+
+/**
+* @brief Func to write to sensor hub via sending generic command byte sequences and data bytes
+*
+* @param[in] cmd_bytes - command byte sequence
+* @param[in] cmd_bytes_len - command byte sequence length in bytes
+* @param[in] data - data byte array to be sent following cmd bytes
+* @param[in] data_len - data array size in bytes
+* @param[in] cmd_delay_ms - time to wait for sensor hub to report status
+*
+* @return 1 byte status: 0x00 (SS_SUCCESS) on success
+*/
+int sh_write_cmd_with_data(uint8_t *cmd_bytes,
+ int cmd_bytes_len,
+ uint8_t *data,
+ int data_len,
+ int cmd_delay_ms);
+
+
+/**
+* @brief Func to read from sensor hub via sending generic command byte sequences
+*
+* @param[in] cmd_bytes - command byte sequence
+* @param[in] cmd_bytes_len - command byte sequence length in bytes
+* @param[in] data - data byte array to be sent following cmd bytes
+* @param[in] data_len - data array size in bytes
+* @param[out] rxbuf - byte buffer to store incoming data (including status byte)
+* @param[in] rxbuf_sz - incoming data buffer size in bytes ( to prevent overflow)
+* @param[in] cmd_delay_ms - time to wait for sensor hub to report status
+*
+* @return 1 byte status: 0x00 (SS_SUCCESS) on success
+*/
+int sh_read_cmd( uint8_t *cmd_bytes,
+ int cmd_bytes_len,
+ uint8_t *data,
+ int data_len,
+ uint8_t *rxbuf,
+ int rxbuf_sz,
+ int sleep_ms );
+
+
+/**
+* @brief func to read sensor hub status
+* @param[out] hubStatus - pointer to output byte sesnor hub status will be written
+* @details ensor hub status byte: [2:0] -> 0 : no Err , 1: comm failure with sensor
+ * [3] -> 0 : FIFO below threshold; 1: FIFO filled to threshold or above.
+ * [4] -> 0 : No FIFO overflow; 1: Sensor Hub Output FIFO overflowed, data lost.
+ * [5] -> 0 : No FIFO overflow; 1: Sensor Hub Input FIFO overflowed, data lost.
+ * [6] -> 0 : Sensor Hub ready; 1: Sensor Hub is busy processing.
+ * [6] -> reserved.
+*
+* @return 1 byte status: 0x00 (SS_SUCCESS) on success
+*/
+int sh_get_sensorhub_status(uint8_t *hubStatus);
+
+
+/**
+* @brief func to read sensor operating mode
+*
+* @param[in] hubMode - pointer to output byte mode will be written
+* @details 0x00: application operating mode
+* 0x08: bootloader operating mode
+*
+* @return 1 byte status: 0x00 (SS_SUCCESS) on success
+*/
+int sh_get_sensorhub_operating_mode(uint8_t *hubMode);
+
+
+/**
+* @brief func to set sensor hub operating mode
+*
+* @param[out] hubMode - pointer to output byte mode will be written
+* @details 0x00: application operating mode
+* 0x02: soft reset
+* 0x08: bootloader operating mode
+*
+* @return 1 byte status: 0x00 (SS_SUCCESS) on success
+*/
+int sh_set_sensorhub_operating_mode(uint8_t hubMode);
+
+
+/**
+* @brief func to set sensorhub data output mode
+*
+* @param[in] data_type : 1 byte output format
+* @details outpur format 0x00 : no data
+ * 0x01 : sensor data SS_DATATYPE_RAW
+ * 0x02 : algo data SS_DATATYPE_ALGO
+ * 0x03 : algo+sensor SS_DATATYPE_BOTH
+*
+* @return 1 byte status: 0x00 (SS_SUCCESS) on success
+*/
+int sh_set_data_type(int data_type, bool sc_en);
+
+
+/**
+* @brief func to get sensorhub data output mode
+*
+* @param[out] data_type - pointer to byte, output format will be written to.
+*
+* @param[out] sc_en - pointer to boolean, sample count enable/disable status format will be written to.
+* If true, SmartSensor is prepending data with 1 byte sample count.
+*
+* @details output format 0x00 : only algorithm data
+ * 0x01 : only raw sensor data
+ * 0x02 : algo + raw sensor data
+ * 0x03 : no data
+*
+* @return 1 byte status: 0x00 (SS_SUCCESS) on success
+*/
+int sh_get_data_type(int *data_type, bool *sc_en);
+
+
+/**
+ * @brief func to set the number of samples for the SmartSensor to collect
+ * before issuing an mfio event reporting interrupt
+ *
+ * @param[in] thresh - Number of samples (1-255) to collect before interrupt
+ *
+ * @return 1 byte status (SS_STATUS) : 0x00 (SS_SUCCESS) on success
+ */
+int sh_set_fifo_thresh( int threshold );
+
+
+/**
+ * @brief func to get the number of samples the SmartSensor will collect
+ * before issuing an mfio event reporting interrupt
+ *
+ * @param[out] thresh - Number of samples (1-255) collected before interrupt
+ *
+ * @return 1 byte status (SS_STATUS) : 0x00 (SS_SUCCESS) on success
+ */
+int sh_get_fifo_thresh(int *thresh);
+
+
+/**
+ * @brief func to check that the SmartSensor is connected
+ *
+ * @return 1 byte connection status 0x00: on connection
+ */
+int sh_ss_comm_check(void);
+
+
+/**
+* @brief func to get the number of available samples in SmartSensor output FIFO
+*
+* @param[out] numSamples - number of data struct samples (1-255)
+*
+* @return 1 byte status: 0x00 (SS_SUCCESS) on success
+*/
+int sh_num_avail_samples(int *numSamples);
+
+
+/**
+* @brief func to pull samples from SmartSensor output FIFO
+*
+* @param[in] numSamples - number of data struct samples to be pulled
+* @param[in] sampleSize - size of cumulative data sample struct (based on enabled sesnors+algorithms) in bytes
+* @param[out] databuf - buffer samples be written
+* @param[in] databufSize - size of provided buffer size samples to be written
+*
+* @return 1 byte status: 0x00 (SS_SUCCESS) on success
+*/
+int sh_read_fifo_data( int numSamples, int sampleSize, uint8_t* databuf, int databufSz);
+
+
+/**
+ * @brief func to set register of a device onboard SmartSensor
+ *
+ * @param[in] idx - Index of device to read
+ * @param[in] addr - Register address
+ * @param[in] val - Register value
+ * @param[in] regSz - Size of sensor device register in bytes
+ *
+ * @return 1 byte status (SS_STATUS) : 0x00 (SS_SUCCESS) on success
+ */
+int sh_set_reg(int idx, uint8_t addr, uint32_t val, int regSz);
+
+
+/**
+ * @brief func to read register from a device onboard SmartSensor
+ *
+ * @param[in] idx - Index of device to read
+ * @param[in] addr - Register address
+ * @param[out] val - Register value
+ *
+ * @return 1 byte status (SS_STATUS) : 0x00 (SS_SUCCESS) on success
+ */
+int sh_get_reg(int idx, uint8_t addr, uint32_t *val);
+
+
+// depricated: int sh_sensor_enable( int idx , int sensorSampleSz);
+/**
+ * @brief func to enable a sensor device onboard SmartSensor
+ *
+ * @param[in] idx - index of sensor device( i.e max8614x) to enable
+ * @param[in] sensorSampleSz - sample size of sensor device( i.e max8614x) to enable
+ * @param[in] ext_mode - enable extermal data input to Sensot Hub, ie accelerometer data for WHRM+WSPo2
+ *
+ * @return 1 byte status (SS_STATUS) : 0x00 (SS_SUCCESS) on success
+ */
+int sh_sensor_enable( int idx , int sensorSampleSz , uint8_t ext_mode );
+
+
+/**
+ * @brief func to disable a device on the SmartSensor
+ *
+ * @param[in] idx - Index of device
+ *
+ * @return 1 byte status (SS_STATUS) : 0x00 (SS_SUCCESS) on success
+ */
+int sh_sensor_disable( int idx );
+
+
+/**
+ * @brief func to get the total number of samples the input FIFO can hold
+ *
+ * @param[in] fifo_size - intger input FIFO capacity will be written to.
+ *
+ * @return 1 byte status (SS_STATUS) : 0x00 (SS_SUCCESS) on success
+ */
+int sh_get_input_fifo_size(int *fifo_size);
+
+
+/**
+ * @brief func to send ass external sensor data (accelerometer) to sensor hub's input FIFO
+ *
+ * @param[in] tx_buf - host sample data to be send to sensor hub input FIFO
+ * @param[in] tx_buf_sz - number of bytes of tx_buf
+ * @param[out] nb_written - number of samples succesfully written to sensor hub's input FIFO
+ *
+ * @return 1 byte status (SS_STATUS) : 0x00 (SS_SUCCESS) on success
+ */
+int sh_feed_to_input_fifo(uint8_t *tx_buf, int tx_buf_sz, int *nb_written);
+
+
+/**
+ * @brief func to get the total number of bytes in the sensor hub's input FIFO
+ *
+ * @param[in] fifo_size - total number of sample bytes available in input FIFO
+ *
+ * @return 1 byte status (SS_STATUS) : 0x00 (SS_SUCCESS) on success
+ */
+int sh_get_num_bytes_in_input_fifo(int *fifo_size);
+
+
+/**
+ * @brief func to enable an algorithm on SmartSensor
+ *
+ * @param[in] idx - index of algorithm to enable
+ * @param[in] sensorSampleSz - sample size of algorithm to enable
+ *
+ * @details idx - 0x00 : AGC
+ * 0x01 : AEC
+ * 0x02 : WHRM/Maximfast
+ * 0x03 : ECG
+ * 0x04 : BPT
+ * 0x05 : SPo2
+ * 0x06 : HRM/Maximfast finger
+ *
+ * @return 1 byte status (SS_STATUS) : 0x00 (SS_SUCCESS) on success
+ */
+int sh_enable_algo(int idx , int algoSampleSz);
+
+
+/**
+ * @brief func to disable an algorithm on the SmartSensor
+ *
+ * @param[in] idx - index of algorithm to disable
+ *
+ * @return 1 byte status (SS_STATUS) : 0x00 (SS_SUCCESS) on success
+ */
+int sh_disable_algo(int idx);
+
+
+/**
+ * @brief func to set the value of an algorithm configuration parameter
+ *
+ * @param[in] algo_idx - index of algorithm
+ * @param[in] cfg_idx - index of configuration parameter
+ * @param[in] cfg Array - byte array of configuration
+ * @param[in] cfg_sz - size of cfg array
+ *
+ * @return 1 byte status (SS_STATUS) : 0x00 (SS_SUCCESS) on success
+ */
+int sh_set_algo_cfg(int algo_idx, int cfg_idx, uint8_t *cfg, int cfg_sz);
+
+
+/**
+ * @brief func to get the value of an algorithm configuration parameter
+ *
+ * @param[in] algo_idx - index of algorithm
+ * @param[in] cfg_idx - index of configuration parameter
+ * @param[out] cfg - array of configuration bytes to be filled in
+ * @param[in] cfg_sz - number of configuration parameter bytes to be read
+ *
+ * @return 1 byte status (SS_STATUS) : 0x00 (SS_SUCCESS) on success
+ */
+int sh_get_algo_cfg(int algo_idx, int cfg_idx, uint8_t *cfg, int cfg_sz);
+
+/**
+ * @brief func to pull sensor, algo data sample bytes from sensor hub. outpur buffer, Content of the buffer depends on
+ * enabled sensors, algorithms and their sample sizes.
+ *
+ * @param[out] databuf - byte buffer to hold pulled samples
+ * @param[in] databufLen - size of provided databuf in bytes
+ * @param[out] nSamplesRea - number of pulled samples in databuf
+ *
+ * @return N/A
+ */
+void sh_ss_execute_once( uint8_t *databuf , int databufLen , int *nSamplesRead);
+
+
+
+
+
+
+
+/* *************************************************************************************** *
+ * DEMO SPECIFIC DECLERATIONS, NOT RELATED TO SENSOR HUB INTERFACE API. *
+ * *
+ * * *
+ ******************************************************************************************/
+
+void sh_init_hwcomm_interface();
+bool sh_has_mfio_event(void);
+void sh_enable_irq_mfioevent(void);
+void sh_disable_irq_mfioevent(void);
+void sh_clear_mfio_event_flag(void);
+int sh_hard_reset(int wakeupMode);
+
+extern uint8_t sh_write_buf[];
+
+/*
+#ifdef __cplusplus
+}
+#endif
+*/
+
+
+
+#endif /* _SENSOR_HUB_H */
+
+
+
+
+
Health Sensor Board Embedded Heart Rate Algorithm Sensor Hub + ECG, Wearables Ev Kit MAXREFDES101#