Diff: mbed/TARGET_NRF51822/ble_l2cap.h

Revision:

0:dd0fea342ad2

diff -r 000000000000 -r dd0fea342ad2 mbed/TARGET_NRF51822/ble_l2cap.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/ble_l2cap.h	Sun Mar 08 19:42:20 2015 +0000
@@ -0,0 +1,135 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+  @addtogroup BLE_L2CAP Logical Link Control and Adaptation Protocol (L2CAP)
+  @{
+  @brief Definitions and prototypes for the L2CAP interface.
+ */
+
+#ifndef BLE_L2CAP_H__
+#define BLE_L2CAP_H__ 
+
+#include "ble_types.h"
+#include "ble_ranges.h"
+#include "ble_err.h"
+#include "nrf_svc.h"
+
+/**@brief L2CAP API SVC numbers. */
+enum BLE_L2CAP_SVCS 
+{
+  SD_BLE_L2CAP_CID_REGISTER = BLE_L2CAP_SVC_BASE,  /**< Register a CID. */
+  SD_BLE_L2CAP_CID_UNREGISTER,                     /**< Unregister a CID. */
+  SD_BLE_L2CAP_TX                                  /**< Transmit a packet. */
+};
+
+/**@addtogroup BLE_L2CAP_DEFINES Defines
+ * @{ */
+
+/**@defgroup BLE_ERRORS_L2CAP SVC return values specific to L2CAP
+ * @{ */
+#define BLE_ERROR_L2CAP_CID_IN_USE            (NRF_L2CAP_ERR_BASE + 0x000)  /**< CID already in use. */
+/** @} */
+
+/**@brief Default L2CAP MTU. */
+#define BLE_L2CAP_MTU_DEF           (23)    
+
+/**@brief Invalid Channel Identifier. */
+#define BLE_L2CAP_CID_INVALID       (0x0000) 
+
+/**@brief Dynamic Channel Identifier base. */
+#define BLE_L2CAP_CID_DYN_BASE      (0x0040) 
+
+/**@brief Maximum amount of dynamic CIDs. */
+#define BLE_L2CAP_CID_DYN_MAX       (8) 
+
+/** @} */
+
+/**@brief Packet header format for L2CAP transmission. */
+typedef struct
+{
+  uint16_t   len;                                 /**< Length of valid info in data member. */
+  uint16_t   cid;                                 /**< Channel ID on which packet is transmitted. */
+} ble_l2cap_header_t;
+
+/**@brief L2CAP Event IDs. */
+enum BLE_L2CAP_EVTS 
+{
+  BLE_L2CAP_EVT_RX  = BLE_L2CAP_EVT_BASE          /**< L2CAP packet received. */
+};
+
+
+/**@brief L2CAP Received packet event report. */
+typedef struct
+{
+  ble_l2cap_header_t header;                      /** L2CAP packet header. */
+  uint8_t    data[1];                             /**< Packet data, variable length. */
+} ble_l2cap_evt_rx_t;
+
+
+/**@brief L2CAP event callback event structure. */
+typedef struct
+{
+  uint16_t conn_handle;                           /**< Connection Handle on which event occured. */
+  union
+  {
+    ble_l2cap_evt_rx_t rx;                        /**< RX Event parameters. */
+  } params;
+} ble_l2cap_evt_t;
+
+
+/**@brief Register a CID with L2CAP.
+ *
+ * @details This registers a higher protocol layer with the L2CAP multiplexer, and is requried prior to all operations on the CID.
+ *          
+ * @param[in] cid L2CAP CID.
+ *
+ * @return @ref NRF_SUCCESS Successfully registered a CID with the L2CAP layer.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, CID must be above @ref BLE_L2CAP_CID_DYN_BASE.
+ * @return @ref BLE_ERROR_L2CAP_CID_IN_USE L2CAP CID already in use.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ */
+SVCALL(SD_BLE_L2CAP_CID_REGISTER, uint32_t, sd_ble_l2cap_cid_register(uint16_t cid));
+
+/**@brief Unregister a CID with L2CAP.
+ *
+ * @details This unregisters a previously registerd higher protocol layer with the L2CAP multiplexer.
+ *          
+ * @param[in] cid L2CAP CID.
+ *
+ * @return @ref NRF_SUCCESS Successfully unregistered the CID.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_NOT_FOUND CID not previously registered.
+ */
+SVCALL(SD_BLE_L2CAP_CID_UNREGISTER, uint32_t, sd_ble_l2cap_cid_unregister(uint16_t cid));
+
+/**@brief Transmit an L2CAP packet.
+ *
+ * @note    It is important to note that a call to this function will <b>consume an application buffer</b>, and will therefore 
+ *          generate a @ref BLE_EVT_TX_COMPLETE event when the packet has been transmitted. 
+ *          Please see the documentation of @ref sd_ble_tx_buffer_count_get for more details.
+ *
+ * @param[in] conn_handle Connection Handle.
+ * @param[in] p_header    Pointer to a packet header containing length and CID.
+ * @param[in] p_data      Pointer to the data to be transmitted.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued an L2CAP packet for transmission.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, CIDs must be registered beforehand with @ref sd_ble_l2cap_cid_register.
+ * @return @ref NRF_ERROR_NOT_FOUND CID not found.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ * @return @ref BLE_ERROR_NO_TX_BUFFERS Not enough application buffers available.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, see @ref BLE_L2CAP_MTU_DEF.
+ */
+SVCALL(SD_BLE_L2CAP_TX, uint32_t, sd_ble_l2cap_tx(uint16_t conn_handle, ble_l2cap_header_t const * const p_header, uint8_t const * const p_data));
+
+
+#endif // BLE_L2CAP_H__
+
+/**
+  @}
+*/