Diff: BLE_API_Native/GapAdvertisingParams.cpp

Revision:

0:dd0fea342ad2

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/GapAdvertisingParams.cpp	Sun Mar 08 19:42:20 2015 +0000
@@ -0,0 +1,168 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+  
+#include <stdio.h>
+#include <string.h>
+
+#include "blecommon.h"
+#include "GapAdvertisingParams.h"
+
+/**************************************************************************/
+/*!
+    \brief
+    Instantiates a new GapAdvertisingParams instance
+
+    \param[in]  advType
+                The GAP advertising mode to use for this device. Valid
+                values are defined in AdvertisingType:
+
+                \par ADV_NON_CONNECTABLE_UNDIRECTED
+                All connections to the peripheral device will be refused.
+                
+                \par ADV_CONNECTABLE_DIRECTED
+                Only connections from a pre-defined central device will be
+                accepted.
+                
+                \par ADV_CONNECTABLE_UNDIRECTED
+                Any central device can connect to this peripheral.
+
+                \par ADV_SCANNABLE_UNDIRECTED
+                Any central device can connect to this peripheral, and
+                the secondary Scan Response payload will be included or
+                available to central devices.
+                
+                \par
+                See Bluetooth Core Specification 4.0 (Vol. 3), Part C,
+                Section 9.3 and Core Specification 4.0 (Vol. 6), Part B,
+                Section 2.3.1 for further information on GAP connection
+                modes
+
+    \param[in]  interval
+                Advertising interval between 0x0020 and 0x4000 in 0.625ms
+                units (20ms to 10.24s).  If using non-connectable mode
+                (ADV_NON_CONNECTABLE_UNDIRECTED) this min value is
+                0x00A0 (100ms).
+
+                \par
+                Increasing this value will allow central devices to detect
+                your peripheral faster at the expense of more power being
+                used by the radio due to the higher data transmit rate.
+                
+                \par
+                This field must be set to 0 if connectionMode is equal
+                to ADV_CONNECTABLE_DIRECTED
+                
+                \par
+                See Bluetooth Core Specification, Vol 3., Part C,
+                Appendix A for suggested advertising intervals.
+                
+    \param[in]  timeout
+                Advertising timeout between 0x1 and 0x3FFF (1 and 16383)
+                in seconds.  Enter 0 to disable the advertising timeout.
+                
+    \par EXAMPLE
+
+    \code
+
+    \endcode
+*/
+/**************************************************************************/
+GapAdvertisingParams::GapAdvertisingParams(AdvertisingType advType, uint16_t interval, uint16_t timeout)
+{
+    _advType = advType;
+    _interval = interval;
+    _timeout = timeout;
+
+    /* Interval checks */
+    if (_advType == ADV_CONNECTABLE_DIRECTED)
+    {
+        /* Interval must be 0 in directed connectable mode */
+        _interval = 0;
+    }
+    else if (_advType == ADV_NON_CONNECTABLE_UNDIRECTED)
+    {
+        /* Min interval is slightly larger than in other modes */
+        if (_interval < GAP_ADV_PARAMS_INTERVAL_MIN_NONCON)
+        {
+            _interval = GAP_ADV_PARAMS_INTERVAL_MIN_NONCON;
+        }
+        if (_interval > GAP_ADV_PARAMS_INTERVAL_MAX)
+        {
+            _interval = GAP_ADV_PARAMS_INTERVAL_MAX;
+        }
+    }
+    else
+    {
+        /* Stay within interval limits */
+        if (_interval < GAP_ADV_PARAMS_INTERVAL_MIN)
+        {
+            _interval = GAP_ADV_PARAMS_INTERVAL_MIN;
+        }
+        if (_interval > GAP_ADV_PARAMS_INTERVAL_MAX)
+        {
+            _interval = GAP_ADV_PARAMS_INTERVAL_MAX;
+        }
+    }
+
+    /* Timeout checks */
+    if (timeout)
+    {
+        /* Stay within timeout limits */
+        if (_timeout > GAP_ADV_PARAMS_TIMEOUT_MAX)
+        {
+            _timeout = GAP_ADV_PARAMS_TIMEOUT_MAX;
+        }
+    }
+}
+
+/**************************************************************************/
+/*!
+    Destructor
+*/
+/**************************************************************************/
+GapAdvertisingParams::~GapAdvertisingParams(void)
+{
+}
+
+/**************************************************************************/
+/*!
+    \brief returns the current Advertising Type value
+*/
+/**************************************************************************/
+GapAdvertisingParams::AdvertisingType GapAdvertisingParams::getAdvertisingType(void)
+{
+    return _advType;
+}
+
+/**************************************************************************/
+/*!
+    \brief returns the current Advertising Delay (in units of 0.625ms)
+*/
+/**************************************************************************/
+uint16_t GapAdvertisingParams::getInterval(void)
+{
+    return _interval;
+}
+
+/**************************************************************************/
+/*!
+    \brief returns the current Advertising Timeout (in seconds)
+*/
+/**************************************************************************/
+uint16_t GapAdvertisingParams::getTimeout(void)
+{
+    return _timeout;
+}