projectconfig.h

00001 /* mbed Microcontroller Library
00002  * Copyright (c) 2006-2013 ARM Limited
00003  *
00004  * Licensed under the Apache License, Version 2.0 (the "License");
00005  * you may not use this file except in compliance with the License.
00006  * You may obtain a copy of the License at
00007  *
00008  *     http://www.apache.org/licenses/LICENSE-2.0
00009  *
00010  * Unless required by applicable law or agreed to in writing, software
00011  * distributed under the License is distributed on an "AS IS" BASIS,
00012  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
00013  * See the License for the specific language governing permissions and
00014  * limitations under the License.
00015  */
00016 
00017 #ifndef _PROJECTCONFIG_H_
00018 #define _PROJECTCONFIG_H_
00019 
00020 /*=========================================================================
00021     MCU & BOARD SELCTION
00022 
00023     CFG_BOARD is one of the value defined in board.h
00024     -----------------------------------------------------------------------*/
00025     #define CFG_BOARD                                  BOARD_PCA10001
00026     #define CFG_MCU_STRING                             "nRF51822"
00027 /*=========================================================================*/
00028 
00029 
00030 /*=========================================================================
00031     CODE BASE VERSION SETTINGS
00032 
00033     Please do not modify this version number.  To set a version number
00034     for your project or firmware, change the values in your 'boards/'
00035     config file.
00036     -----------------------------------------------------------------------*/
00037     #define CFG_CODEBASE_VERSION_MAJOR                 0
00038     #define CFG_CODEBASE_VERSION_MINOR                 1
00039     #define CFG_CODEBASE_VERSION_REVISION              0
00040 /*=========================================================================*/
00041 
00042 
00043 /*=========================================================================
00044     FIRMWARE VERSION SETTINGS
00045     -----------------------------------------------------------------------*/
00046     #define CFG_FIRMWARE_VERSION_MAJOR                 0
00047     #define CFG_FIRMWARE_VERSION_MINOR                 0
00048     #define CFG_FIRMWARE_VERSION_REVISION              0
00049 /*=========================================================================*/
00050 
00051 
00052 /*=========================================================================
00053     DEBUG LEVEL
00054     -----------------------------------------------------------------------
00055 
00056     CFG_DEBUG                 Level 3: Full debug output, any failed assert
00057                                        will produce a breakpoint for the
00058                                        debugger
00059                               Level 2: ATTR_ALWAYS_INLINE is null, ASSERT
00060                                        has text
00061                               Level 1: ATTR_ALWAYS_INLINE is an attribute,
00062                                        ASSERT has no text
00063                               Level 0: No debug information generated
00064 
00065     -----------------------------------------------------------------------*/
00066     #define CFG_DEBUG                                  (1)
00067 
00068     #if (CFG_DEBUG > 3) || (CFG_DEBUG < 0)
00069       #error "CFG_DEBUG must be a value between 0 (no debug) and 3"
00070     #endif
00071 /*=========================================================================*/
00072 
00073 
00074 /*=========================================================================
00075     GENERAL NRF51 PERIPHERAL SETTINGS
00076     -----------------------------------------------------------------------
00077 
00078     CFG_SCHEDULER_ENABLE      Set this to 'true' or 'false' depending on
00079                               if you use the event scheduler or not
00080 
00081     -----------------------------------------------------------------------*/
00082     #define CFG_SCHEDULER_ENABLE                       false
00083 
00084     /*------------------------------- GPIOTE ------------------------------*/
00085     #define CFG_GPIOTE_MAX_USERS                       1                        /**< Maximum number of users of the GPIOTE handler. */
00086 
00087     /*-------------------------------- TIMER ------------------------------*/
00088     #define CFG_TIMER_PRESCALER                        0                        /**< Value of the RTC1 PRESCALER register. freq = (32768/(PRESCALER+1)) */
00089     #define CFG_TIMER_MAX_INSTANCE                     8                        /**< Maximum number of simultaneously created timers. */
00090     #define CFG_TIMER_OPERATION_QUEUE_SIZE             5                        /**< Size of timer operation queues. */
00091 /*=========================================================================*/
00092 
00093 
00094 /*=========================================================================
00095     BTLE SETTINGS
00096     -----------------------------------------------------------------------*/
00097 
00098     #define CFG_BLE_TX_POWER_LEVEL                     4                        /**< in dBm (Valid values are -40, -20, -16, -12, -8, -4, 0, 4) */
00099 
00100     /*---------------------------- BOND MANAGER ---------------------------*/
00101     #define CFG_BLE_BOND_FLASH_PAGE_BOND               (BLE_FLASH_PAGE_END-1)   /**< Flash page used for bond manager bonding information.*/
00102     #define CFG_BLE_BOND_FLASH_PAGE_SYS_ATTR           (BLE_FLASH_PAGE_END-3)   /**< Flash page used for bond manager system attribute information. TODO check if we can use BLE_FLASH_PAGE_END-2*/
00103     #define CFG_BLE_BOND_DELETE_BUTTON_NUM             0                        /**< Button to press to delete bond details during init */
00104 
00105     /*------------------------------ SECURITY -----------------------------*/
00106     #define CFG_BLE_SEC_PARAM_MITM                     0                        /**< Man In The Middle protection not required. */
00107     #define CFG_BLE_SEC_PARAM_IO_CAPABILITIES          BLE_GAP_IO_CAPS_NONE     /**< No I/O capabilities. */
00108     #define CFG_BLE_SEC_PARAM_OOB                      0                        /**< Out Of Band data not available. */
00109     #define CFG_BLE_SEC_PARAM_MIN_KEY_SIZE             7                        /**< Minimum encryption key size. */
00110     #define CFG_BLE_SEC_PARAM_MAX_KEY_SIZE             16
00111 
00112     /*--------------------------------- GAP -------------------------------*/
00113     #define CFG_GAP_APPEARANCE                         BLE_APPEARANCE_GENERIC_TAG
00114     #define CFG_GAP_LOCAL_NAME                         "nRF5x"
00115 
00116     #define CFG_GAP_CONNECTION_MIN_INTERVAL_MS         500                      /**< Minimum acceptable connection interval */
00117     #define CFG_GAP_CONNECTION_MAX_INTERVAL_MS         1000                     /**< Maximum acceptable connection interval */
00118     #define CFG_GAP_CONNECTION_SUPERVISION_TIMEOUT_MS  4000                     /**< Connection supervisory timeout */
00119     #define CFG_GAP_CONNECTION_SLAVE_LATENCY           0                        /**< Slave Latency in number of connection events. */
00120 
00121     #define CFG_GAP_ADV_INTERVAL_MS                    25                       /**< The advertising interval in miliseconds, should be multiply of 0.625 */
00122     #define CFG_GAP_ADV_TIMEOUT_S                      180                      /**< The advertising timeout in units of seconds. */
00123 /*=========================================================================*/
00124 
00125 
00126 /*=========================================================================
00127     VALIDATION
00128     -----------------------------------------------------------------------*/
00129     #if CFG_BLE_TX_POWER_LEVEL != -40 && CFG_BLE_TX_POWER_LEVEL != -20 && CFG_BLE_TX_POWER_LEVEL != -16 && CFG_BLE_TX_POWER_LEVEL != -12 && CFG_BLE_TX_POWER_LEVEL != -8  && CFG_BLE_TX_POWER_LEVEL != -4  && CFG_BLE_TX_POWER_LEVEL != 0   && CFG_BLE_TX_POWER_LEVEL != 4
00130         #error "CFG_BLE_TX_POWER_LEVEL must be -40, -20, -16, -12, -8, -4, 0 or 4"
00131     #endif
00132 /*=========================================================================*/
00133 
00134 #endif /* _PROJECTCONFIG_H_ */