bunt _ / PulseCounter

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Homepage

Example, counting 48MHz-pulses on pin p29 generated by pin p22 with PwmOscillator (https://mbed.org/users/geotec/code/PwmOscillator/). Pins p22 & p29 must be connected. Count is triggered when pin p30 = high (I connected oscillator with 9kHz that triggered periodically).

#include "mbed.h"
#include "PwmOscillator.h"
#include "PulseCounter.h"

Serial usbPC(USBTX, USBRX);   // sends log messages via USB to PC terminal
PwmOscillator pulseGenerator; // generates pulses to be count (48 MHz) on pin p22. Connect this pin to p29 (counter input).
PulseCounter pulseCounter;    // counts the pulses on pin p29 between trigger events (= rising edges) on pin p30.

int main() 
{
    usbPC.printf("---> start <---\n");
    pulseGenerator.initWithFrequency(48000000);
    pulseCounter.init();
    pulseGenerator.start();
        
    pulseCounter.start();   
    wait(1);        // waiting 1 second for trigger events (pin30: rising edge). Count pulses between trigger events.
    pulseCounter.stop();
                        
    pulseGenerator.stop();
        
    // read & print pulseCounter results
    uint32_t pulseCounterResults[20];
    pulseCounter.counterArray(&pulseCounterResults[0],sizeof pulseCounterResults / sizeof (uint32_t));
        
    for(int i = 0; i < (sizeof pulseCounterResults / sizeof (uint32_t)); i++) {
        usbPC.printf("counter of trigger event %i = %u\n",i,pulseCounterResults[i]);
    }
    //
        
    usbPC.printf("   finished.\n");
}
All wikipages