Activity
Question
This pulse counter use interrupts?
marked as solved by answer:
Yes, this library uses Nested Vectored Interrupts (NVIC). If you go to the [[https://developer.mbed.org/users/geotec/code/PulseCounter/ | …
bunt _
- 14 Jul 2015
bunt _
- 14 Jul 2015
Comment on:
Is it possible to count the pulses of a 16MHz signal?
- I published it: https://mbed.org/users/geotec/code/PulseCounter/
bunt _
- 29 Oct 2013
bunt _
- 29 Oct 2013
Library updated:
PulseCounter
- bugfix: capture interrupt enabled before start()
bunt _
- 09 Jan 2013
bunt _
- 09 Jan 2013
Question
Is it possible to count the pulses of a 16MHz signal?
marked as solved by answer:
Hi Erik, thanks a lot for your (fast) reply! Your library FastPWM worked very well …
bunt _
- 15 Dec 2012
bunt _
- 15 Dec 2012
Question
SPI / I2C clock defect? (frequency irregular above 20kHz)
marked as solved by answer:
Solved. It was a oscillator problem (bad connection). SPI communication works now. Every single write …
bunt _
- 13 Dec 2012
bunt _
- 13 Dec 2012
Question asked:
Is it possible to count the pulses of a 16MHz signal?: I tried capturing with Timer2 (pin 29: CAP2.0). This works very well up to 500kHz. …
bunt _
- 13 Dec 2012
bunt _
- 13 Dec 2012
Question asked:
SPI / I2C clock defect? (frequency irregular above 20kHz): I'm trying to get the lpc1768 SPI port (p5,p6,p7) running. I started using the example …
bunt _
- 05 Dec 2012
bunt _
- 05 Dec 2012