Gary Servin / ros_lib_kinetic

ROS Serial library for Mbed platforms for ROS Kinetic Kame. Check http://wiki.ros.org/rosserial_mbed/ for more information.

Dependencies:   BufferedSerial

Dependents:   rosserial_mbed_hello_world_publisher_kinetic s-rov-firmware ROS_HCSR04 DISCO-F469NI_LCDTS_demo ... more

ROSSerial_mbed for Kinetic Distribution

The Robot Operating System (ROS) is a flexible framework for writing robot software. It is a collection of tools, libraries, and conventions that aim to simplify the task of creating complex and robust robot behavior across a wide variety of robotic platforms.

The rosserial_mbed package allows to write ROS nodes on any mbed enabled devices and have them connected to a running ROS system on your computer using the serial port.

Hello World (example publisher)

Import programrosserial_mbed_hello_world_publisher_kinetic

rosserial_mbed Hello World example for Kinetic Kame distribution

Last commit 31 Dec 2016 by Gary Servin

Running the Code

Now, launch the roscore in a new terminal window:

Quote:

$ roscore

Next, run the rosserial client application that forwards your MBED messages to the rest of ROS. Make sure to use the correct serial port:

Quote:

$ rosrun rosserial_python serial_node.py /dev/ttyACM0

Finally, watch the greetings come in from your MBED by launching a new terminal window and entering :

Quote:

$ rostopic echo chatter

See Also

More examples

Blink

/*
 * rosserial Subscriber Example
 * Blinks an LED on callback
 */
#include "mbed.h"
#include <ros.h>
#include <std_msgs/Empty.h>

ros::NodeHandle nh;
DigitalOut myled(LED1);

void messageCb(const std_msgs::Empty& toggle_msg){
    myled = !myled;   // blink the led
}

ros::Subscriber<std_msgs::Empty> sub("toggle_led", &messageCb);

int main() {
    nh.initNode();
    nh.subscribe(sub);

    while (1) {
        nh.spinOnce();
        wait_ms(1);
    }
}

Push

/*
 * Button Example for Rosserial
 */

#include "mbed.h"
#include <ros.h>
#include <std_msgs/Bool.h>

PinName button = p20;

ros::NodeHandle nh;

std_msgs::Bool pushed_msg;
ros::Publisher pub_button("pushed", &pushed_msg);

DigitalIn button_pin(button);
DigitalOut led_pin(LED1);

bool last_reading;
long last_debounce_time=0;
long debounce_delay=50;
bool published = true;

Timer t;
int main() {
    t.start();
    nh.initNode();
    nh.advertise(pub_button);

    //Enable the pullup resistor on the button
    button_pin.mode(PullUp);

    //The button is a normally button
    last_reading = ! button_pin;

    while (1) {
        bool reading = ! button_pin;

        if (last_reading!= reading) {
            last_debounce_time = t.read_ms();
            published = false;
        }

        //if the button value has not changed for the debounce delay, we know its stable
        if ( !published && (t.read_ms() - last_debounce_time)  > debounce_delay) {
            led_pin = reading;
            pushed_msg.data = reading;
            pub_button.publish(&pushed_msg);
            published = true;
        }

        last_reading = reading;

        nh.spinOnce();
    }
}

geometry_msgs/Point32.h

Committer:
garyservin
Date:
2016-12-31
Revision:
1:a849bf78d77f
Parent:
0:9e9b7db60fd5

File content as of revision 1:a849bf78d77f:

#ifndef _ROS_geometry_msgs_Point32_h
#define _ROS_geometry_msgs_Point32_h

#include <stdint.h>
#include <string.h>
#include <stdlib.h>
#include "ros/msg.h"

namespace geometry_msgs
{

  class Point32 : public ros::Msg
  {
    public:
      typedef float _x_type;
      _x_type x;
      typedef float _y_type;
      _y_type y;
      typedef float _z_type;
      _z_type z;

    Point32():
      x(0),
      y(0),
      z(0)
    {
    }

    virtual int serialize(unsigned char *outbuffer) const
    {
      int offset = 0;
      union {
        float real;
        uint32_t base;
      } u_x;
      u_x.real = this->x;
      *(outbuffer + offset + 0) = (u_x.base >> (8 * 0)) & 0xFF;
      *(outbuffer + offset + 1) = (u_x.base >> (8 * 1)) & 0xFF;
      *(outbuffer + offset + 2) = (u_x.base >> (8 * 2)) & 0xFF;
      *(outbuffer + offset + 3) = (u_x.base >> (8 * 3)) & 0xFF;
      offset += sizeof(this->x);
      union {
        float real;
        uint32_t base;
      } u_y;
      u_y.real = this->y;
      *(outbuffer + offset + 0) = (u_y.base >> (8 * 0)) & 0xFF;
      *(outbuffer + offset + 1) = (u_y.base >> (8 * 1)) & 0xFF;
      *(outbuffer + offset + 2) = (u_y.base >> (8 * 2)) & 0xFF;
      *(outbuffer + offset + 3) = (u_y.base >> (8 * 3)) & 0xFF;
      offset += sizeof(this->y);
      union {
        float real;
        uint32_t base;
      } u_z;
      u_z.real = this->z;
      *(outbuffer + offset + 0) = (u_z.base >> (8 * 0)) & 0xFF;
      *(outbuffer + offset + 1) = (u_z.base >> (8 * 1)) & 0xFF;
      *(outbuffer + offset + 2) = (u_z.base >> (8 * 2)) & 0xFF;
      *(outbuffer + offset + 3) = (u_z.base >> (8 * 3)) & 0xFF;
      offset += sizeof(this->z);
      return offset;
    }

    virtual int deserialize(unsigned char *inbuffer)
    {
      int offset = 0;
      union {
        float real;
        uint32_t base;
      } u_x;
      u_x.base = 0;
      u_x.base |= ((uint32_t) (*(inbuffer + offset + 0))) << (8 * 0);
      u_x.base |= ((uint32_t) (*(inbuffer + offset + 1))) << (8 * 1);
      u_x.base |= ((uint32_t) (*(inbuffer + offset + 2))) << (8 * 2);
      u_x.base |= ((uint32_t) (*(inbuffer + offset + 3))) << (8 * 3);
      this->x = u_x.real;
      offset += sizeof(this->x);
      union {
        float real;
        uint32_t base;
      } u_y;
      u_y.base = 0;
      u_y.base |= ((uint32_t) (*(inbuffer + offset + 0))) << (8 * 0);
      u_y.base |= ((uint32_t) (*(inbuffer + offset + 1))) << (8 * 1);
      u_y.base |= ((uint32_t) (*(inbuffer + offset + 2))) << (8 * 2);
      u_y.base |= ((uint32_t) (*(inbuffer + offset + 3))) << (8 * 3);
      this->y = u_y.real;
      offset += sizeof(this->y);
      union {
        float real;
        uint32_t base;
      } u_z;
      u_z.base = 0;
      u_z.base |= ((uint32_t) (*(inbuffer + offset + 0))) << (8 * 0);
      u_z.base |= ((uint32_t) (*(inbuffer + offset + 1))) << (8 * 1);
      u_z.base |= ((uint32_t) (*(inbuffer + offset + 2))) << (8 * 2);
      u_z.base |= ((uint32_t) (*(inbuffer + offset + 3))) << (8 * 3);
      this->z = u_z.real;
      offset += sizeof(this->z);
     return offset;
    }

    const char * getType(){ return "geometry_msgs/Point32"; };
    const char * getMD5(){ return "cc153912f1453b708d221682bc23d9ac"; };

  };

}
#endif