Garima Gupta / Mbed 2 deprecated BLE_UART_LCD_Batt_DevInfo

Use of nRF51822 to demonstrate usage of BLE-UART service provided by Nordic and the use of uLCD-144-G2. The demonstration uses the nRF Master Control Panel and nRF UART demo apps provided by Nordic and available on Google Play and Apple Store. The firmware receives data over the TX characteristic, increments it by 1 and sends it over RX characteristic. The notifications need to be enabled for the RX characteristic in the Master Control Panel to be able to receive the data. For more information check the notebook page: http://developer.mbed.org/users/garimagupta002/notebook/ble-uart-lcd-demo/

Dependencies:   4DGL-uLCD-SE BLE_API DFRobot_BLE_LoopbackUART mbed nRF51822

Fork of DFRobot_BLE_LoopbackUART by Angelo qiao

main.cpp

Committer:
jimaobian
Date:
2014-10-31
Revision:
9:7b3841a91548
Parent:
6:e0fc9072e853
Child:
10:c3eef6f3686a

File content as of revision 9:7b3841a91548:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "mbed.h"
#include "BLEDevice.h"

#include "UARTService.h"

#define NEED_CONSOLE_OUTPUT 1 /* Set this if you need debug messages on the console;
                               * it will have an impact on code-size and power consumption. */

#if NEED_CONSOLE_OUTPUT
#define DEBUG(...) { printf(__VA_ARGS__); }
#else
#define DEBUG(...) /* nothing */
#endif /* #if NEED_CONSOLE_OUTPUT */

BLEDevice  ble;
DigitalOut led1(LED1);
DigitalOut led2(LED2);
Timer timer;

UARTService *uartServicePtr;

void disconnectionCallback(Gap::Handle_t handle, Gap::DisconnectionReason_t reason)
{
    DEBUG("Disconnected!\n\r");
    DEBUG("Restarting the advertising process\n\r");
    ble.startAdvertising();
}

void onDataWritten(const GattCharacteristicWriteCBParams *params)
{
    if ((uartServicePtr != NULL) && (params->charHandle == uartServicePtr->getTXCharacteristicHandle())) {
        uint16_t bytesRead = params->len;
        DEBUG("received %u bytes\n\r", bytesRead);
        ble.updateCharacteristicValue(uartServicePtr->getRXCharacteristicHandle(), params->data, bytesRead);
    }
}

void periodicCallback(void)
{
    led1 = !led1;
}

int main(void)
{
    
    
    timer.start();
    
    led1 = 1;
    Ticker ticker;
    ticker.attach(periodicCallback, 1);

    DEBUG("Initialising the nRF51822\n\r");
    ble.init();
    ble.onDisconnection(disconnectionCallback);
    ble.onDataWritten(onDataWritten);

    /* setup advertising */
    ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED);
    ble.setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
    ble.accumulateAdvertisingPayload(GapAdvertisingData::SHORTENED_LOCAL_NAME,
                                     (const uint8_t *)"BLE UART", sizeof("BLE UART") - 1);
    ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_128BIT_SERVICE_IDS,
                                     (const uint8_t *)UARTServiceUUID_reversed, sizeof(UARTServiceUUID_reversed));

    ble.setAdvertisingInterval(160); /* 100ms; in multiples of 0.625ms. */
    ble.startAdvertising();

    UARTService uartService(ble);
    uartServicePtr = &uartService;


    while (true) {
        static unsigned long led2timer=timer.read_ms();
        
        if((unsigned long)timer.read_ms()-led2timer>1000UL)
        {
            led2timer=timer.read_ms();
            led2=!led2;
        }
        
        
        
        ble.waitForEvent();
    }
}

//// Count the time to toggle a LED
// 
//#include "mbed.h"
// 
//Timer timer;
//DigitalOut led(LED1);
//int begin, end;
// 
//int main() {
//    timer.start();
//    
//    while(true)
//    {
////    begin = timer.read_ms();
//    led = !led;
//    wait(1);
////    end = timer.read_ms();
////    printf("%d us\r\n", end - begin);
//    }
//}