高 杨
TI's CC3100. A test demo with very little testing done!
Fork of
cc3100_Test_Demo2
by 
高 杨
Diff: simplelink/cc3100_user.h
- Revision:
- 0:e89ba455dbcf
- Child:
- 2:b3fd5b3d9860
diff -r 000000000000 -r e89ba455dbcf simplelink/cc3100_user.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/simplelink/cc3100_user.h Tue Feb 10 12:09:29 2015 +0000
@@ -0,0 +1,1035 @@
+/*
+ * user.h - CC31xx/CC32xx Host Driver Implementation
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the
+ * distribution.
+ *
+ * Neither the name of Texas Instruments Incorporated nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*/
+
+
+#ifndef USER_H_
+#define USER_H_
+
+/*!
+
+ \addtogroup Porting
+ @{
+
+*/
+
+/*!
+ ******************************************************************************
+
+ \defgroup porting_user_include User Include Files
+
+ This section IS NOT REQUIRED in case user provided primitives are handled
+ in makefiles or project configurations (IDE)
+
+ PORTING ACTION:
+ - Include all required header files for the definition of:
+ -# Transport layer library API (e.g. SPI, UART)
+ -# OS primitives definitions (e.g. Task spawn, Semaphores)
+ -# Memory management primitives (e.g. alloc, free)
+
+ ******************************************************************************
+ */
+
+#include <string.h>
+
+#ifndef SL_IF_TYPE_UART
+#include "cc3100_spi.h"
+#else
+#include "uart.h"
+#endif
+
+
+/*!
+ ******************************************************************************
+
+ \defgroup porting_capabilities Capability Set Definition
+
+ This section IS NOT REQUIRED in case one of the following pre defined
+ capabilities set is in use:
+ - SL_TINY
+ - SL_SMALL
+ - SL_FULL
+
+ PORTING ACTION:
+ - Define one of the pre-defined capabilities set or uncomment the
+ relevant definitions below to select the required capabilities
+ @{
+ *******************************************************************************
+ */
+
+#define SL_FULL
+
+/*!
+ \def MAX_CONCURRENT_ACTIONS
+
+ \brief Defines the maximum number of concurrent action in the system
+ Min:1 , Max: 32
+
+ Actions which has async events as return, can be
+
+ \sa
+
+ \note In case there are not enough resources for the actions needed in the system,
+ error is received: POOL_IS_EMPTY
+ one option is to increase MAX_CONCURRENT_ACTIONS
+ (improves performance but results in memory consumption)
+ Other option is to call the API later (decrease performance)
+
+ \warning In case of setting to one, recommend to use non-blocking recv\recvfrom to allow
+ multiple socket recv
+*/
+#define MAX_CONCURRENT_ACTIONS 10
+
+/*!
+ \def CPU_FREQ_IN_MHZ
+ \brief Defines CPU frequency for Host side, for better accuracy of busy loops, if any
+ \sa
+ \note
+
+ \warning If not set the default CPU frequency is set to 200MHz
+ This option will be deprecated in future release
+*/
+/*
+#define CPU_FREQ_IN_MHZ 25
+*/
+
+
+/*!
+ \def SL_INC_ARG_CHECK
+
+ \brief Defines whether the SimpleLink driver perform argument check
+ or not
+
+ When defined, the SimpleLink driver perform argument check on
+ function call. Removing this define could reduce some code
+ size and improve slightly the performances but may impact in
+ unpredictable behaviour in case of invalid arguments
+
+ \sa
+
+ \note belongs to \ref porting_sec
+
+ \warning Removing argument check may cause unpredictable behaviour in
+ case of invalid arguments.
+ In this case the user is responsible to argument validity
+ (for example all handlers must not be NULL)
+*/
+#define SL_INC_ARG_CHECK
+
+
+/*!
+ \def SL_INC_STD_BSD_API_NAMING
+
+ \brief Defines whether SimpleLink driver should expose standard BSD
+ APIs or not
+
+ When defined, the SimpleLink driver in addition to its alternative
+ BSD APIs expose also standard BSD APIs.
+ Standard BSD API includes the following functions:
+ socket , close , accept , bind , listen , connect , select ,
+ setsockopt , getsockopt , recv , recvfrom , write , send , sendto ,
+ gethostbyname
+
+ \sa
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+
+#define SL_INC_STD_BSD_API_NAMING
+
+
+/*!
+ \brief Defines whether to include extended API in SimpleLink driver
+ or not
+
+ When defined, the SimpleLink driver will include also all
+ extended API of the included packages
+
+ \sa ext_api
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+#define SL_INC_EXT_API
+
+/*!
+ \brief Defines whether to include WLAN package in SimpleLink driver
+ or not
+
+ When defined, the SimpleLink driver will include also
+ the WLAN package
+
+ \sa
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+#define SL_INC_WLAN_PKG
+
+/*!
+ \brief Defines whether to include SOCKET package in SimpleLink
+ driver or not
+
+ When defined, the SimpleLink driver will include also
+ the SOCKET package
+
+ \sa
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+#define SL_INC_SOCKET_PKG
+
+/*!
+ \brief Defines whether to include NET_APP package in SimpleLink
+ driver or not
+
+ When defined, the SimpleLink driver will include also the
+ NET_APP package
+
+ \sa
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+#define SL_INC_NET_APP_PKG
+
+/*!
+ \brief Defines whether to include NET_CFG package in SimpleLink
+ driver or not
+
+ When defined, the SimpleLink driver will include also
+ the NET_CFG package
+
+ \sa
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+#define SL_INC_NET_CFG_PKG
+
+/*!
+ \brief Defines whether to include NVMEM package in SimpleLink
+ driver or not
+
+ When defined, the SimpleLink driver will include also the
+ NVMEM package
+
+ \sa
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+#define SL_INC_NVMEM_PKG
+
+/*!
+ \brief Defines whether to include socket server side APIs
+ in SimpleLink driver or not
+
+ When defined, the SimpleLink driver will include also socket
+ server side APIs
+
+ \sa server_side
+
+ \note
+
+ \warning
+*/
+#define SL_INC_SOCK_SERVER_SIDE_API
+
+/*!
+ \brief Defines whether to include socket client side APIs in SimpleLink
+ driver or not
+
+ When defined, the SimpleLink driver will include also socket
+ client side APIs
+
+ \sa client_side
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+#define SL_INC_SOCK_CLIENT_SIDE_API
+
+/*!
+ \brief Defines whether to include socket receive APIs in SimpleLink
+ driver or not
+
+ When defined, the SimpleLink driver will include also socket
+ receive side APIs
+
+ \sa recv_api
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+#define SL_INC_SOCK_RECV_API
+
+/*!
+ \brief Defines whether to include socket send APIs in SimpleLink
+ driver or not
+
+ When defined, the SimpleLink driver will include also socket
+ send side APIs
+
+ \sa send_api
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+#define SL_INC_SOCK_SEND_API
+
+/*!
+
+ Close the Doxygen group.
+ @}
+
+ */
+
+
+/*!
+ ******************************************************************************
+
+ \defgroup porting_enable_device Device Enable/Disable IO
+
+ The enable/disable API provide mechanism to enable/disable the network processor
+
+
+ PORTING ACTION:
+ - None
+ @{
+
+ ******************************************************************************
+ */
+/*!
+ \brief Preamble to the enabling the Network Processor.
+ Placeholder to implement any pre-process operations
+ before enabling networking operations.
+
+ \sa sl_DeviceEnable
+
+ \note belongs to \ref ported_sec
+
+*/
+#define sl_DeviceEnablePreamble()
+
+/*!
+ \brief Enable the Network Processor
+
+ \sa sl_DeviceDisable
+
+ \note belongs to \ref porting_sec
+
+*/
+//#define sl_DeviceEnable _spi->CC3100_enable
+
+/*!
+ \brief Disable the Network Processor
+
+ \sa sl_DeviceEnable
+
+ \note belongs to \ref porting_sec
+*/
+//#define sl_DeviceDisable _spi->CC3100_disable
+
+/*!
+
+ Close the Doxygen group.
+ @}
+
+ */
+
+/*!
+ ******************************************************************************
+
+ \defgroup porting_interface Hardware Transport Interface
+
+ The simple link device can work with different transport interfaces
+ (namely,SPI or UART). Texas Instruments provides single driver
+ that can work with all these types. This section binds the
+ physical transport interface with the SimpleLink driver
+
+
+ \note Correct and efficient implementation of this driver is critical
+ for the performances of the SimpleLink device on this platform.
+
+
+ PORTING ACTION:
+ - None
+
+ @{
+
+ ******************************************************************************
+ */
+
+#define _SlFd_t int32_t
+
+/*!
+ \brief Opens an interface communication port to be used for communicating
+ with a SimpleLink device
+
+ Given an interface name and option flags, this function opens
+ the communication port and creates a file descriptor.
+ This file descriptor is used afterwards to read and write
+ data from and to this specific communication channel.
+ The speed, clock polarity, clock phase, chip select and all other
+ specific attributes of the channel are all should be set to hardcoded
+ in this function.
+
+ \param ifName - points to the interface name/path. The interface name is an
+ optional attributes that the simple link driver receives
+ on opening the driver (sl_Start).
+ In systems that the spi channel is not implemented as
+ part of the OS device drivers, this parameter could be NULL.
+
+ \param flags - optional flags parameters for future use
+
+ \return upon successful completion, the function shall open the channel
+ and return a non-negative integer representing the file descriptor.
+ Otherwise, -1 shall be returned
+
+ \sa sl_IfClose , sl_IfRead , sl_IfWrite
+
+ \note The prototype of the function is as follow:
+ Fd_t xxx_IfOpen(char* pIfName , unsigned long flags);
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+//#define sl_IfOpen _spi->spi_Open
+
+/*!
+ \brief Closes an opened interface communication port
+
+ \param fd - file descriptor of opened communication channel
+
+ \return upon successful completion, the function shall return 0.
+ Otherwise, -1 shall be returned
+
+ \sa sl_IfOpen , sl_IfRead , sl_IfWrite
+
+ \note The prototype of the function is as follow:
+ int xxx_IfClose(Fd_t Fd);
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+//#define sl_IfClose _spi->spi_Close
+
+/*!
+ \brief Attempts to read up to len bytes from an opened communication channel
+ into a buffer starting at pBuff.
+
+ \param fd - file descriptor of an opened communication channel
+
+ \param pBuff - pointer to the first location of a buffer that contains enough
+ space for all expected data
+
+ \param len - number of bytes to read from the communication channel
+
+ \return upon successful completion, the function shall return the number of read bytes.
+ Otherwise, 0 shall be returned
+
+ \sa sl_IfClose , sl_IfOpen , sl_IfWrite
+
+
+ \note The prototype of the function is as follow:
+ int xxx_IfRead(Fd_t Fd , char* pBuff , int Len);
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+//#define sl_IfRead _spi->spi_Read
+
+/*!
+ \brief attempts to write up to len bytes to the SPI channel
+
+ \param fd - file descriptor of an opened communication channel
+
+ \param pBuff - pointer to the first location of a buffer that contains
+ the data to send over the communication channel
+
+ \param len - number of bytes to write to the communication channel
+
+ \return upon successful completion, the function shall return the number of sent bytes.
+ otherwise, 0 shall be returned
+
+ \sa sl_IfClose , sl_IfOpen , sl_IfRead
+
+ \note This function could be implemented as zero copy and return only upon successful completion
+ of writing the whole buffer, but in cases that memory allocation is not too tight, the
+ function could copy the data to internal buffer, return back and complete the write in
+ parallel to other activities as long as the other SPI activities would be blocked until
+ the entire buffer write would be completed
+
+ The prototype of the function is as follow:
+ int xxx_IfWrite(Fd_t Fd , char* pBuff , int Len);
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+//#define sl_IfWrite _spi->spi_Write
+
+/*!
+ \brief register an interrupt handler routine for the host IRQ
+
+ \param InterruptHdl - pointer to interrupt handler routine
+
+ \param pValue - pointer to a memory structure that is passed
+ to the interrupt handler.
+
+ \return upon successful registration, the function shall return 0.
+ Otherwise, -1 shall be returned
+
+ \sa
+
+ \note If there is already registered interrupt handler, the function
+ should overwrite the old handler with the new one
+
+ \note If the handler is a null pointer, the function should un-register the
+ interrupt handler, and the interrupts can be disabled.
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+//#define sl_IfRegIntHdlr(InterruptHdl , pValue) \
+// _spi->registerInterruptHandler(InterruptHdl , pValue)
+/*!
+ \brief Masks the Host IRQ
+
+ \sa sl_IfUnMaskIntHdlr
+
+
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+
+//#define sl_IfMaskIntHdlr()
+
+/*!
+ \brief Unmasks the Host IRQ
+
+ \sa sl_IfMaskIntHdlr
+
+
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+
+//#define sl_IfUnMaskIntHdlr()
+
+/*!
+ \brief Write Handers for statistics debug on write
+
+ \param interface handler - pointer to interrupt handler routine
+
+
+ \return no return value
+
+ \sa
+
+ \note An optional hooks for monitoring before and after write info
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+/*
+#define SL_START_WRITE_STAT
+*/
+
+#ifdef SL_START_WRITE_STAT
+#define sl_IfStartWriteSequence
+#define sl_IfEndWriteSequence
+#endif
+/*!
+
+ Close the Doxygen group.
+ @}
+
+ */
+
+/*!
+ ******************************************************************************
+
+ \defgroup porting_mem_mgm Memory Management
+
+ This section declare in which memory management model the SimpleLink driver
+ will run:
+ -# Static
+ -# Dynamic
+
+ This section IS NOT REQUIRED in case Static model is selected.
+
+ The default memory model is Static
+
+ PORTING ACTION:
+ - If dynamic model is selected, define the alloc and free functions.
+
+ @{
+
+ *****************************************************************************
+ */
+
+/*!
+ \brief Defines whether the SimpleLink driver is working in dynamic
+ memory model or not
+
+ When defined, the SimpleLink driver use dynamic allocations
+ if dynamic allocation is selected malloc and free functions
+ must be retrieved
+
+ \sa
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+/*
+#define SL_MEMORY_MGMT_DYNAMIC
+*/
+
+#ifdef SL_MEMORY_MGMT_DYNAMIC
+
+/*!
+ \brief
+
+ \sa
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+#define sl_Malloc(Size)
+
+/*!
+ \brief
+
+ \sa
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+#define sl_Free(pMem)
+
+#endif
+
+/*!
+
+ Close the Doxygen group.
+ @}
+
+ */
+
+/*!
+ ******************************************************************************
+
+ \defgroup porting_os Operating System (OS)
+
+ The simple link driver can run on multi-threaded environment as well
+ as non-os environment (main loop)
+
+ This section IS NOT REQUIRED in case you are working on non-os environment.
+
+ If you choose to work in multi-threaded environment under any operating system
+ you will have to provide some basic adaptation routines to allow the driver
+ to protect access to resources from different threads (locking object) and
+ to allow synchronization between threads (sync objects).
+
+ PORTING ACTION:
+ -# Uncomment SL_PLATFORM_MULTI_THREADED define
+ -# Bind locking object routines
+ -# Bind synchronization object routines
+ -# Optional - Bind spawn thread routine
+
+ @{
+
+ ******************************************************************************
+ */
+
+/*
+#define SL_PLATFORM_MULTI_THREADED
+*/
+
+#ifdef SL_PLATFORM_MULTI_THREADED
+
+/*!
+ \brief
+ \sa
+ \note belongs to \ref porting_sec
+ \warning
+*/
+#define SL_OS_RET_CODE_OK
+
+/*!
+ \brief
+ \sa
+ \note belongs to \ref porting_sec
+ \warning
+*/
+#define SL_OS_WAIT_FOREVER
+
+/*!
+ \brief
+ \sa
+ \note belongs to \ref porting_sec
+ \warning
+*/
+#define SL_OS_NO_WAIT
+
+/*!
+ \brief type definition for a time value
+
+ \note On each porting or platform the type could be whatever is needed - integer, pointer to structure etc.
+
+ \note belongs to \ref porting_sec
+*/
+#define _SlTime_t
+
+/*!
+ \brief type definition for a sync object container
+
+ Sync object is object used to synchronize between two threads or thread and interrupt handler.
+ One thread is waiting on the object and the other thread send a signal, which then
+ release the waiting thread.
+ The signal must be able to be sent from interrupt context.
+ This object is generally implemented by binary semaphore or events.
+
+ \note On each porting or platform the type could be whatever is needed - integer, structure etc.
+
+ \note belongs to \ref porting_sec
+*/
+#define _SlSyncObj_t
+
+
+/*!
+ \brief This function creates a sync object
+
+ The sync object is used for synchronization between different thread or ISR and
+ a thread.
+
+ \param pSyncObj - pointer to the sync object control block
+
+ \return upon successful creation the function should return 0
+ Otherwise, a negative value indicating the error code shall be returned
+
+ \note belongs to \ref porting_sec
+ \warning
+*/
+#define sl_SyncObjCreate(pSyncObj,pName)
+
+
+/*!
+ \brief This function deletes a sync object
+
+ \param pSyncObj - pointer to the sync object control block
+
+ \return upon successful deletion the function should return 0
+ Otherwise, a negative value indicating the error code shall be returned
+ \note belongs to \ref porting_sec
+ \warning
+*/
+#define sl_SyncObjDelete(pSyncObj)
+
+
+/*!
+ \brief This function generates a sync signal for the object.
+
+ All suspended threads waiting on this sync object are resumed
+
+ \param pSyncObj - pointer to the sync object control block
+
+ \return upon successful signalling the function should return 0
+ Otherwise, a negative value indicating the error code shall be returned
+ \note the function could be called from ISR context
+ \warning
+*/
+#define sl_SyncObjSignal(pSyncObj)
+
+/*!
+ \brief This function generates a sync signal for the object from Interrupt
+
+ This is for RTOS that should signal from IRQ using a dedicated API
+
+ \param pSyncObj - pointer to the sync object control block
+
+ \return upon successful signalling the function should return 0
+ Otherwise, a negative value indicating the error code shall be returned
+ \note the function could be called from ISR context
+ \warning
+*/
+#define sl_SyncObjSignalFromIRQ(pSyncObj)
+/*!
+ \brief This function waits for a sync signal of the specific sync object
+
+ \param pSyncObj - pointer to the sync object control block
+ \param Timeout - numeric value specifies the maximum number of mSec to
+ stay suspended while waiting for the sync signal
+ Currently, the simple link driver uses only two values:
+ - OSI_WAIT_FOREVER
+ - OSI_NO_WAIT
+
+ \return upon successful reception of the signal within the timeout window return 0
+ Otherwise, a negative value indicating the error code shall be returned
+ \note belongs to \ref porting_sec
+ \warning
+*/
+#define sl_SyncObjWait(pSyncObj,Timeout)
+
+/*!
+ \brief type definition for a locking object container
+
+ Locking object are used to protect a resource from mutual accesses of two or more threads.
+ The locking object should support reentrant locks by a signal thread.
+ This object is generally implemented by mutex semaphore
+
+ \note On each porting or platform the type could be whatever is needed - integer, structure etc.
+ \note belongs to \ref porting_sec
+*/
+#define _SlLockObj_t
+
+/*!
+ \brief This function creates a locking object.
+
+ The locking object is used for protecting a shared resources between different
+ threads.
+
+ \param pLockObj - pointer to the locking object control block
+
+ \return upon successful creation the function should return 0
+ Otherwise, a negative value indicating the error code shall be returned
+ \note belongs to \ref porting_sec
+ \warning
+*/
+#define sl_LockObjCreate(pLockObj,pName)
+
+/*!
+ \brief This function deletes a locking object.
+
+ \param pLockObj - pointer to the locking object control block
+
+ \return upon successful deletion the function should return 0
+ Otherwise, a negative value indicating the error code shall be returned
+ \note belongs to \ref porting_sec
+ \warning
+*/
+#define sl_LockObjDelete(pLockObj)
+
+/*!
+ \brief This function locks a locking object.
+
+ All other threads that call this function before this thread calls
+ the osi_LockObjUnlock would be suspended
+
+ \param pLockObj - pointer to the locking object control block
+ \param Timeout - numeric value specifies the maximum number of mSec to
+ stay suspended while waiting for the locking object
+ Currently, the simple link driver uses only two values:
+ - OSI_WAIT_FOREVER
+ - OSI_NO_WAIT
+
+
+ \return upon successful reception of the locking object the function should return 0
+ Otherwise, a negative value indicating the error code shall be returned
+ \note belongs to \ref porting_sec
+ \warning
+*/
+#define sl_LockObjLock(pLockObj,Timeout)
+
+/*!
+ \brief This function unlock a locking object.
+
+ \param pLockObj - pointer to the locking object control block
+
+ \return upon successful unlocking the function should return 0
+ Otherwise, a negative value indicating the error code shall be returned
+ \note belongs to \ref porting_sec
+ \warning
+*/
+#define sl_LockObjUnlock(pLockObj)
+
+#endif
+/*!
+ \brief This function call the pEntry callback from a different context
+
+ \param pEntry - pointer to the entry callback function
+
+ \param pValue - pointer to any type of memory structure that would be
+ passed to pEntry callback from the execution thread.
+
+ \param flags - execution flags - reserved for future usage
+
+ \return upon successful registration of the spawn the function should return 0
+ (the function is not blocked till the end of the execution of the function
+ and could be returned before the execution is actually completed)
+ Otherwise, a negative value indicating the error code shall be returned
+ \note belongs to \ref porting_sec
+ \warning
+*/
+/*
+#define SL_PLATFORM_EXTERNAL_SPAWN
+*/
+
+#ifdef SL_PLATFORM_EXTERNAL_SPAWN
+#define sl_Spawn(pEntry,pValue,flags)
+#endif
+
+/*!
+
+ Close the Doxygen group.
+ @}
+
+ */
+
+
+/*!
+ ******************************************************************************
+
+ \defgroup porting_events Event Handlers
+
+ This section includes the asynchronous event handlers routines
+
+ PORTING ACTION:
+ -Uncomment the required handler and define your routine as the value
+ of this handler
+
+ @{
+
+ ******************************************************************************
+ */
+
+/*!
+ \brief
+
+ \sa
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+#define sl_GeneralEvtHdlr SimpleLinkGeneralEventHandler
+
+
+/*!
+ \brief An event handler for WLAN connection or disconnection indication
+ This event handles async WLAN events.
+ Possible events are:
+ SL_WLAN_CONNECT_EVENT - indicates WLAN is connected
+ SL_WLAN_DISCONNECT_EVENT - indicates WLAN is disconnected
+ \sa
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+#define sl_WlanEvtHdlr SimpleLinkWlanEventHandler
+
+/*!
+ \brief An event handler for IP address asynchronous event. Usually accepted after new WLAN connection.
+ This event handles networking events.
+ Possible events are:
+ SL_NETAPP_IPV4_ACQUIRED - IP address was acquired (DHCP or Static)
+
+ \sa
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+
+#define sl_NetAppEvtHdlr SimpleLinkNetAppEventHandler
+
+/*!
+ \brief A callback for HTTP server events.
+ Possible events are:
+ SL_NETAPP_HTTPGETTOKENVALUE - NWP requests to get the value of a specific token
+ SL_NETAPP_HTTPPOSTTOKENVALUE - NWP post to the host a new value for a specific token
+
+ \param pServerEvent - Contains the relevant event information (SL_NETAPP_HTTPGETTOKENVALUE or SL_NETAPP_HTTPPOSTTOKENVALUE)
+
+ \param pServerResponse - Should be filled by the user with the relevant response information (i.e SL_NETAPP_HTTPSETTOKENVALUE as a response to SL_NETAPP_HTTPGETTOKENVALUE event)
+
+ \sa
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+
+#define sl_HttpServerCallback SimpleLinkHttpServerCallback
+
+/*!
+ \brief
+
+ \sa
+
+ \note belongs to \ref porting_sec
+
+ \warning
+*/
+#define sl_SockEvtHdlr SimpleLinkSockEventHandler
+
+
+
+/*!
+
+ Close the Doxygen group.
+ @}
+
+ */
+
+#endif /* __USER_H__ */
+