Diff: main.cpp

Revision:

0:e89ba455dbcf

Child:

3:b89198ac2efe

diff -r 000000000000 -r e89ba455dbcf main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Tue Feb 10 12:09:29 2015 +0000
@@ -0,0 +1,361 @@
+/*
+ * main.c - sample application to switch to AP mode and ping client
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *
+ *    Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the
+ *    distribution.
+ *
+ *    Neither the name of Texas Instruments Incorporated nor the names of
+ *    its contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/*
+ * Application Name     -   Getting started with Wi-Fi Access-Point mode
+ * Application Overview -   This sample application demonstrates how
+ *                          to configure CC3100 in Access-Point mode. Any
+ *                          WLAN station in its range can connect/communicate
+ *                          to/with it as per the standard networking protocols.
+ *                          On a successful connection, the device ping's the
+ *                          connected station.
+ * Application Details  -   http://processors.wiki.ti.com/index.php/CC31xx_Getting_Started_with_WLAN_AP
+ *                          doc\examples\getting_started_with_wlan_ap.pdf
+ */
+
+#include "cc3100_simplelink.h"
+#include "cc3100_sl_common.h"
+
+#include "fPtr_func.h"
+#include "cc3100_spi.h"
+#include "myBoardInit.h"
+
+using namespace mbed_cc3100;
+
+class cc3100_netcfg *_netcfg;
+
+#if (THIS_BOARD == MBED_BOARD_LPC1768)
+//cc3100 _cc3100(p9, p10, p8, SPI(p5, p6, p7));//LPC1768  irq, nHib, cs, mosi, miso, sck
+cc3100 _cc3100(p9, p10, p8, SPI(p11, p12, p13));//LPC1768  irq, nHib, cs, mosi, miso, sck
+Serial pc(USBTX, USBRX);//lpc1768
+#elif (THIS_BOARD == ST_MBED_NUCLEOF411)
+cc3100 _cc3100(PA_9, PC_7, PB_6, SPI(PA_7, PA_6, PA_5));//nucleoF411  irq, nHib, cs, mosi, miso, sck
+Serial pc(SERIAL_TX, SERIAL_RX);//nucleoF411
+#elif (THIS_BOARD == ST_MBED_NUCLEOF401)
+cc3100 _cc3100(PA_9, PC_7, PB_6, SPI(PA_7, PA_6, PA_5));//nucleoF401  irq, nHib, cs, mosi, miso, sck
+Serial pc(SERIAL_TX, SERIAL_RX);//nucleoF401
+#elif (THIS_BOARD == EA_MBED_LPC4088)
+cc3100 _cc3100(p9, p10, p8, SPI(p5, p6, p7));//LPC4088  irq, nHib, cs, mosi, miso, sck
+Serial pc(USBTX, USBRX);//EA_lpc4088
+#elif (THIS_BOARD == ST_MBED_NUCLEOF103)
+cc3100 _cc3100(PA_9, PC_7, PB_6, SPI(PA_7, PA_6, PA_5));//nucleoF103  irq, nHib, cs, mosi, miso, sck
+Serial pc(SERIAL_TX, SERIAL_RX);
+#else
+
+#endif
+
+#define APPLICATION_VERSION "1.1.0"
+
+/*
+ * GLOBAL VARIABLES -- Start
+ */
+int32_t demo = 1;
+
+/*
+ * GLOBAL VARIABLES -- End
+ */
+
+
+/*
+ * STATIC FUNCTION DEFINITIONS -- Start
+ */
+
+static void displayBanner();
+/*
+ * STATIC FUNCTION DEFINITIONS -- End
+ */
+ 
+void station_app(void);
+void AP_app(void);
+
+/*
+ * Application's entry point
+ */
+  
+ 
+int main(void) {
+
+    pc.baud(115200);
+
+    int32_t retVal = -1;
+
+    retVal = _cc3100.initializeAppVariables();
+    ASSERT_ON_ERROR(retVal);
+
+    displayBanner();
+
+    _cc3100.CLR_STATUS_BIT(g_Status, STATUS_BIT_PING_DONE);
+    g_PingPacketsRecv = 0;
+
+    /*
+     * Following function configures the device to default state by cleaning
+     * the persistent settings stored in NVMEM (viz. connection profiles &
+     * policies, power policy etc)
+     *
+     * Applications may choose to skip this step if the developer is sure
+     * that the device is in its default state at start of application
+     *
+     * Note that all profiles and persistent settings that were done on the
+     * device will be lost
+     */
+    retVal = _cc3100.configureSimpleLinkToDefaultState();
+    
+    if(retVal < 0) {
+        if (DEVICE_NOT_IN_STATION_MODE == retVal)
+            printf(" Failed to configure the device to its default state \n\r");
+
+        LOOP_FOREVER();
+    }
+
+    printf(" Device is configured in it's default state \n\r");
+    
+    /*
+     * Assumption is that the device is configured in station mode already
+     * and it is in its default state
+     */
+    /* Initializing the CC3100 device */
+    
+    if(!(demo ==1)){
+        retVal = _cc3100.sl_Start(0, 0, 0);
+    
+        if ((retVal < 0) || (ROLE_STA != retVal) ){
+        printf(" Failed to start the device \n\r");
+        LOOP_FOREVER();
+        }
+
+        printf(" Device started as STATION \n\r");
+    }
+    
+    if(demo == 0 ){
+       station_app();
+    }else{
+       AP_app(); 
+    }    
+    return 0;
+}    
+
+/*!
+    \brief This function displays the application's banner
+
+    \param      None
+
+    \return     None
+*/
+static void displayBanner()
+{
+    if(!demo){
+        printf("\n\r\n\r");
+        printf(" Getting started with WLAN access-point application - Version ");
+        printf("%s",APPLICATION_VERSION);
+        printf("\n\r*******************************************************************************\n\r");
+    
+    }else{
+         printf("\n\r\n\r");
+         printf(" Getting started with station application - Version ");
+         printf(" %s", APPLICATION_VERSION);
+         printf("\n\r*******************************************************************************\n\r");
+    }
+}
+
+void AP_app(void){
+    
+    SlPingStartCommand_t PingParams = {0};
+    SlPingReport_t Report = {0};
+    SlNetCfgIpV4Args_t ipV4 = {0};
+    SlNetAppDhcpServerBasicOpt_t dhcpParams = {0};
+
+    uint8_t SecType = 0;
+    int32_t role = ROLE_STA;
+    int32_t retVal = -1;
+    
+    /*
+     * Assumption is that the device is configured in station mode already
+     * and it is in its default state
+     */
+    role = _cc3100.sl_Start(0, 0, 0);
+    if (ROLE_AP == role) {
+        /* If the device is in AP mode, we need to wait for this event before doing anything */
+        while(!_cc3100.IS_IP_ACQUIRED(g_Status,STATUS_BIT_IP_ACQUIRED)) {
+            _cc3100.SlNonOsMainLoopTask();
+        }
+    } else {
+        /* Configure CC3100 to start in AP mode */
+        retVal = _cc3100.WlanSetMode(ROLE_AP);
+        if(retVal < 0)
+            LOOP_FOREVER();
+
+        retVal = _cc3100.sl_Stop(SL_STOP_TIMEOUT);
+        if(retVal < 0)
+            LOOP_FOREVER();
+
+        _cc3100.CLR_STATUS_BIT(g_Status, STATUS_BIT_IP_ACQUIRED);
+
+        role = _cc3100.sl_Start(0, 0, 0);
+        if (ROLE_AP == role) {
+            /* If the device is in AP mode, we need to wait for this event before doing anything */
+            while(!_cc3100.IS_IP_ACQUIRED(g_Status,STATUS_BIT_IP_ACQUIRED)) {
+                _cc3100.SlNonOsMainLoopTask();
+            }
+        } else {
+            printf(" Device couldn't be configured in AP mode \n\r");
+            LOOP_FOREVER();
+        }
+    }
+    
+    printf(" Ready to configue SSID\r\n");
+
+    /* Configure the SSID of the CC3100 */
+    retVal = _cc3100.WlanSet(SL_WLAN_CFG_AP_ID, WLAN_AP_OPT_SSID, strlen(SSID_AP_MODE), (uint8_t *)SSID_AP_MODE);
+    if(retVal < 0)
+        LOOP_FOREVER();
+
+    SecType = SEC_TYPE_AP_MODE;
+    /* Configure the Security parameter the AP mode */
+    retVal = _cc3100.WlanSet(SL_WLAN_CFG_AP_ID, WLAN_AP_OPT_SECURITY_TYPE, 1, (uint8_t *)&SecType);
+    if(retVal < 0)
+        LOOP_FOREVER();
+
+    retVal = _cc3100.WlanSet(SL_WLAN_CFG_AP_ID, WLAN_AP_OPT_PASSWORD, strlen(PASSWORD_AP_MODE), (uint8_t *)PASSWORD_AP_MODE);
+    if(retVal < 0){
+        LOOP_FOREVER();
+    }
+    
+    ipV4.ipV4 = _netcfg->SL_IPV4_VAL(192,168,0,1);//CONFIG_IP;
+    ipV4.ipV4Mask = _netcfg->SL_IPV4_VAL(255,255,255,0);//CONFIG_MASK;
+    ipV4.ipV4Gateway = _netcfg->SL_IPV4_VAL(192,168,0,1);//CONFIG_GATEWAY;
+    ipV4.ipV4DnsServer = _netcfg->SL_IPV4_VAL(192,168,0,1);//CONFIG_DNS;
+
+    /* Configure the Static IP */
+    retVal = _cc3100.NetCfgSet(SL_IPV4_AP_P2P_GO_STATIC_ENABLE,1,sizeof(SlNetCfgIpV4Args_t), (uint8_t *)&ipV4);
+    if(retVal < 0)
+        LOOP_FOREVER();
+
+    dhcpParams.lease_time      =  IP_LEASE_TIME;
+    dhcpParams.ipv4_addr_start =  _netcfg->SL_IPV4_VAL(192,168,0,100);//DHCP_START_IP;
+    dhcpParams.ipv4_addr_last  =  _netcfg->SL_IPV4_VAL(192,168,0,200);//DHCP_END_IP;
+
+    retVal = _cc3100.NetAppSet(SL_NET_APP_DHCP_SERVER_ID, NETAPP_SET_DHCP_SRV_BASIC_OPT, sizeof(SlNetAppDhcpServerBasicOpt_t), (uint8_t*)&dhcpParams);
+    if(retVal < 0)
+        LOOP_FOREVER();
+
+    /* Restart the CC3100 */
+    retVal = _cc3100.sl_Stop(SL_STOP_TIMEOUT);
+    if(retVal < 0)
+        LOOP_FOREVER();
+
+    g_Status = 0;
+    
+    role = _cc3100.sl_Start(0, 0, 0);
+    
+    if (ROLE_AP == role) {
+        /* If the device is in AP mode, we need to wait for this event before doing anything */
+        while(!_cc3100.IS_IP_ACQUIRED(g_Status,STATUS_BIT_IP_ACQUIRED)) {
+            _cc3100.SlNonOsMainLoopTask();
+        }
+    } else {
+        printf(" Device couldn't enter AP mode \n\r");
+        LOOP_FOREVER();
+    }
+    printf(" Device started as Access Point\n\r");
+
+    /* Wait */
+    printf(" Waiting for clients to connect...!\n\r");
+    while((!_cc3100.IS_IP_LEASED(g_Status,STATUS_BIT_IP_LEASED)) || (!_cc3100.IS_STA_CONNECTED(g_Status,STATUS_BIT_STA_CONNECTED))) {
+        _cc3100.SlNonOsMainLoopTask();
+    }
+    printf(" Client connected to the device \n\r");
+    printf(" Pinging...! \n\r");
+
+    /* Set the ping parameters */
+    PingParams.PingIntervalTime = PING_INTERVAL;
+    PingParams.PingSize = PING_SIZE;
+    PingParams.PingRequestTimeout = PING_TIMEOUT;
+    PingParams.TotalNumberOfAttempts = PING_ATTEMPTS;
+    PingParams.Flags = 0;
+    PingParams.Ip = g_StationIP; /* Fill the station IP address connected to CC3100 */
+
+    /* Ping client connected to CC3100 */
+    retVal = _cc3100.NetAppPingStart((SlPingStartCommand_t*)&PingParams, SL_AF_INET, (SlPingReport_t*)&Report, &SimpleLinkPingReport);
+    if(retVal < 0)
+        LOOP_FOREVER();
+
+    /* Wait */
+    while(!_cc3100.IS_PING_DONE(g_Status,STATUS_BIT_PING_DONE)) {
+        _cc3100.SlNonOsMainLoopTask();
+    }
+
+    if (0 == g_PingPacketsRecv) {
+        printf(" A STATION couldn't connect to the device \n\r");
+        //ASSERT_ON_ERROR(LAN_CONNECTION_FAILED);
+        printf(" ERROR code %d\n\r", LAN_CONNECTION_FAILED);
+    }
+
+    printf(" Device and the station are successfully connected \n\r");
+    //return SUCCESS;
+}
+
+void station_app(void){
+    
+    int32_t retVal = -1;
+
+    /* Connecting to WLAN AP */
+    retVal = _cc3100.establishConnectionWithAP();
+    if(retVal < 0)
+    {
+        printf(" Failed to establish connection w/ an AP \n\r");
+        LOOP_FOREVER();
+    }
+
+    printf(" Connection established w/ AP and IP is acquired \n\r");
+    printf(" Pinging...! \n\r");
+    retVal = _cc3100.checkLanConnection();
+    if(retVal < 0)
+    {
+        printf(" Device couldn't connect to LAN \n\r");
+        LOOP_FOREVER();
+    }
+
+    retVal = _cc3100.checkInternetConnection();
+    if(retVal < 0)
+    {
+        printf(" Device couldn't connect to the internet \n\r");
+        LOOP_FOREVER();
+    }
+
+    printf(" Device successfully connected to the LAN and internet \n\r");
+}              
+
+