高 杨
TI's CC3100. A test demo with very little testing done!
Fork of
cc3100_Test_Demo2
by 
高 杨
Diff: simplelink/cc3100_netcfg.h
- Revision:
- 6:778b081f6a13
diff -r d3b320ebd469 -r 778b081f6a13 simplelink/cc3100_netcfg.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/simplelink/cc3100_netcfg.h Thu Mar 19 15:39:08 2015 +0000
@@ -0,0 +1,288 @@
+/*
+ * netcfg.h - CC31xx/CC32xx Host Driver Implementation
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the
+ * distribution.
+ *
+ * Neither the name of Texas Instruments Incorporated nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+*/
+
+/*****************************************************************************/
+/* Include files */
+/*****************************************************************************/
+#include "cc3100_simplelink.h"
+
+#ifndef NETCFG_H_
+#define NETCFG_H_
+
+namespace mbed_cc3100 {
+
+/*!
+
+ \addtogroup netcfg
+ @{
+
+*/
+
+
+/*****************************************************************************/
+/* Macro declarations */
+/*****************************************************************************/
+const uint8_t SL_MAC_ADDR_LEN = (6);
+const uint8_t IPCONFIG_MODE_DISABLE_IPV4 = (0);
+const uint8_t IPCONFIG_MODE_ENABLE_IPV4 = (1);
+
+/*****************************************************************************/
+/* Structure/Enum declarations */
+/*****************************************************************************/
+typedef enum {
+ SL_MAC_ADDRESS_SET = 1,
+ SL_MAC_ADDRESS_GET = 2,
+ SL_IPV4_STA_P2P_CL_GET_INFO = 3,
+ SL_IPV4_STA_P2P_CL_DHCP_ENABLE = 4,
+ SL_IPV4_STA_P2P_CL_STATIC_ENABLE = 5,
+ SL_IPV4_AP_P2P_GO_GET_INFO = 6,
+ SL_IPV4_AP_P2P_GO_STATIC_ENABLE = 7,
+ SL_SET_HOST_RX_AGGR = 8,
+ MAX_SETTINGS = 0xFF
+} Sl_NetCfg_e;
+
+
+typedef struct {
+ uint32_t ipV4;
+ uint32_t ipV4Mask;
+ uint32_t ipV4Gateway;
+ uint32_t ipV4DnsServer;
+} SlNetCfgIpV4Args_t;
+
+class cc3100_netcfg
+{
+
+public:
+
+ cc3100_netcfg(cc3100_driver &driver);
+
+ ~cc3100_netcfg();
+
+
+ /*****************************************************************************/
+ /* Function prototypes */
+ /*****************************************************************************/
+
+ /*!
+ \brief Internal function for setting network configurations
+
+ \return On success, zero is returned. On error, -1 is
+ returned
+
+ \param[in] ConfigId configuration id
+ \param[in] ConfigOpt configurations option
+ \param[in] ConfigLen configurations len
+ \param[in] pValues configurations values
+
+ \sa
+ \note
+ \warning
+
+ \par Examples:
+ \code
+ SL_MAC_ADDRESS_SET:
+
+ Setting MAC address to the Device.
+ The new MAC address will override the default MAC address and it be saved in the FileSystem.
+ Requires restarting the device for updating this setting.
+
+ uint8_t MAC_Address[6];
+ MAC_Address[0] = 0x8;
+ MAC_Address[1] = 0x0;
+ MAC_Address[2] = 0x28;
+ MAC_Address[3] = 0x22;
+ MAC_Address[4] = 0x69;
+ MAC_Address[5] = 0x31;
+ sl_NetCfgSet(SL_MAC_ADDRESS_SET,1,SL_MAC_ADDR_LEN,(uint8_t *)newMacAddress);
+ sl_Stop(0);
+ sl_Start(NULL,NULL,NULL);
+ \endcode
+
+ \code
+ SL_IPV4_STA_P2P_CL_STATIC_ENABLE:
+
+ Setting a static IP address to the device working in STA mode or P2P client.
+ The IP address will be stored in the FileSystem.
+ In order to disable the static IP and get the address assigned from DHCP one should use SL_STA_P2P_CL_IPV4_DHCP_SET
+
+ SlNetCfgIpV4Args_t ipV4;
+ ipV4.ipV4 = (uint32_t)SL_IPV4_VAL(10,1,1,201); // uint32_t IP address
+ ipV4.ipV4Mask = (uint32_t)SL_IPV4_VAL(255,255,255,0); // uint32_t Subnet mask for this STA/P2P
+ ipV4.ipV4Gateway = (uint32_t)SL_IPV4_VAL(10,1,1,1); // uint32_t Default gateway address
+ ipV4.ipV4DnsServer = (uint32_t)SL_IPV4_VAL(8,16,32,64); // uint32_t DNS server address
+
+ sl_NetCfgSet(SL_IPV4_STA_P2P_CL_STATIC_ENABLE,IPCONFIG_MODE_ENABLE_IPV4,sizeof(SlNetCfgIpV4Args_t),(uint8_t *)&ipV4);
+ sl_Stop(0);
+ sl_Start(NULL,NULL,NULL);
+ \endcode
+
+ \code
+ SL_IPV4_STA_P2P_CL_DHCP_ENABLE:
+
+ Setting IP address by DHCP to FileSystem using WLAN sta mode or P2P client.
+ This should be done once if using Serial Flash.
+ This is the system's default mode for acquiring an IP address after WLAN connection.
+ uint8_t val = 1;
+ sl_NetCfgSet(SL_IPV4_STA_P2P_CL_DHCP_ENABLE,IPCONFIG_MODE_ENABLE_IPV4,1,&val);
+ sl_Stop(0);
+ sl_Start(NULL,NULL,NULL);
+ \endcode
+
+ \code
+ SL_IPV4_AP_P2P_GO_STATIC_ENABLE:
+
+ Setting a static IP address to the device working in AP mode or P2P go.
+ The IP address will be stored in the FileSystem. Requires restart.
+
+ SlNetCfgIpV4Args_t ipV4;
+ ipV4.ipV4 = (uint32_t)SL_IPV4_VAL(10,1,1,201); // uint32_t IP address
+ ipV4.ipV4Mask = (uint32_t)SL_IPV4_VAL(255,255,255,0); // uint32_t Subnet mask for this AP/P2P
+ ipV4.ipV4Gateway = (uint32_t)SL_IPV4_VAL(10,1,1,1); // uint32_t Default gateway address
+ ipV4.ipV4DnsServer = (uint32_t)SL_IPV4_VAL(8,16,32,64); // uint32_t DNS server address
+
+ sl_NetCfgSet(SL_IPV4_AP_P2P_GO_STATIC_ENABLE,IPCONFIG_MODE_ENABLE_IPV4,sizeof(SlNetCfgIpV4Args_t),(uint8_t *)&ipV4);
+ sl_Stop(0);
+ sl_Start(NULL,NULL,NULL);
+ \endcode
+
+
+ */
+#if _SL_INCLUDE_FUNC(sl_NetCfgSet)
+ int32_t sl_NetCfgSet(const uint8_t ConfigId, const uint8_t ConfigOpt, const uint8_t ConfigLen, const uint8_t *pValues);
+#endif
+
+
+ /*!
+ \brief Internal function for getting network configurations
+
+ \return On success, zero is returned. On error, -1 is
+ returned
+
+ \param[in] ConfigId configuration id
+
+ \param[out] pConfigOpt Get configurations option
+
+ \param[out] pConfigLen The length of the allocated memory as input, when the
+ function complete, the value of this parameter would be
+ the len that actually read from the device.\n
+ If the device return length that is longer from the input
+ value, the function will cut the end of the returned structure
+ and will return ESMALLBUF
+
+ \param[out] pValues - get configurations values
+
+ \sa
+ \note
+ \warning
+ \par Examples:
+ \code
+ SL_MAC_ADDRESS_GET:
+
+ Get the device MAC address.
+ The returned MAC address is taken from FileSystem first. If the MAC address was not set by SL_MAC_ADDRESS_SET, the default MAC address
+ is retrieved from HW.
+
+ uint8_t macAddressVal[SL_MAC_ADDR_LEN];
+ uint8_t macAddressLen = SL_MAC_ADDR_LEN;
+ sl_NetCfgGet(SL_MAC_ADDRESS_GET,NULL,&macAddressLen,(uint8_t *)macAddressVal);
+
+ \endcode
+
+ \code
+ SL_IPV4_STA_P2P_CL_GET_INFO:
+
+ Get IP address from WLAN station or P2P client. A DHCP flag is returned to indicate if the IP address is static or from DHCP.
+
+ uint8_t len = sizeof(SlNetCfgIpV4Args_t);
+ uint8_t dhcpIsOn = 0;
+ SlNetCfgIpV4Args_t ipV4 = {0};
+ sl_NetCfgGet(SL_IPV4_STA_P2P_CL_GET_INFO,&dhcpIsOn,&len,(uint8_t *)&ipV4);
+
+ printf("DHCP is %s IP %d.%d.%d.%d MASK %d.%d.%d.%d GW %d.%d.%d.%d DNS %d.%d.%d.%d\n",
+ (dhcpIsOn > 0) ? "ON" : "OFF",
+ SL_IPV4_BYTE(ipV4.ipV4,3),SL_IPV4_BYTE(ipV4.ipV4,2),SL_IPV4_BYTE(ipV4.ipV4,1),SL_IPV4_BYTE(ipV4.ipV4,0),
+ SL_IPV4_BYTE(ipV4.ipV4Mask,3),SL_IPV4_BYTE(ipV4.ipV4Mask,2),SL_IPV4_BYTE(ipV4.ipV4Mask,1),SL_IPV4_BYTE(ipV4.ipV4Mask,0),
+ SL_IPV4_BYTE(ipV4.ipV4Gateway,3),SL_IPV4_BYTE(ipV4.ipV4Gateway,2),SL_IPV4_BYTE(ipV4.ipV4Gateway,1),SL_IPV4_BYTE(ipV4.ipV4Gateway,0),
+ SL_IPV4_BYTE(ipV4.ipV4DnsServer,3),SL_IPV4_BYTE(ipV4.ipV4DnsServer,2),SL_IPV4_BYTE(ipV4.ipV4DnsServer,1),SL_IPV4_BYTE(ipV4.ipV4DnsServer,0));
+
+ \endcode
+
+ \code
+ SL_IPV4_AP_P2P_GO_GET_INFO:
+
+ Get static IP address for AP or P2P go.
+
+ uint8_t len = sizeof(SlNetCfgIpV4Args_t);
+ uint8_t dhcpIsOn = 0; // this flag is meaningless on AP/P2P go.
+ SlNetCfgIpV4Args_t ipV4 = {0};
+ sl_NetCfgGet(SL_IPV4_AP_P2P_GO_GET_INFO,&dhcpIsOn,&len,(uint8_t *)&ipV4);
+
+ printf("IP %d.%d.%d.%d MASK %d.%d.%d.%d GW %d.%d.%d.%d DNS %d.%d.%d.%d\n",
+ SL_IPV4_BYTE(ipV4.ipV4,3),SL_IPV4_BYTE(ipV4.ipV4,2),SL_IPV4_BYTE(ipV4.ipV4,1),SL_IPV4_BYTE(ipV4.ipV4,0),
+ SL_IPV4_BYTE(ipV4.ipV4Mask,3),SL_IPV4_BYTE(ipV4.ipV4Mask,2),SL_IPV4_BYTE(ipV4.ipV4Mask,1),SL_IPV4_BYTE(ipV4.ipV4Mask,0),
+ SL_IPV4_BYTE(ipV4.ipV4Gateway,3),SL_IPV4_BYTE(ipV4.ipV4Gateway,2),SL_IPV4_BYTE(ipV4.ipV4Gateway,1),SL_IPV4_BYTE(ipV4.ipV4Gateway,0),
+ SL_IPV4_BYTE(ipV4.ipV4DnsServer,3),SL_IPV4_BYTE(ipV4.ipV4DnsServer,2),SL_IPV4_BYTE(ipV4.ipV4DnsServer,1),SL_IPV4_BYTE(ipV4.ipV4DnsServer,0));
+
+ \endcode
+
+
+ */
+#if _SL_INCLUDE_FUNC(sl_NetCfgGet)
+ int32_t sl_NetCfgGet(const uint8_t ConfigId ,uint8_t *pConfigOpt, uint8_t *pConfigLen, uint8_t *pValues);
+#endif
+
+uint32_t SL_IPV4_VAL(uint8_t add_3,uint8_t add_2,uint8_t add_1,uint8_t add_0);
+uint8_t SL_IPV4_BYTE(uint32_t val,uint8_t index);
+
+private:
+
+ cc3100_driver &_driver;
+
+};//class
+
+}//namespace mbed_cc3100
+
+ /*!
+
+ Close the Doxygen group.
+ @}
+
+ */
+
+
+#endif /* __NETCFG_H__ */
+
+