Diff: targets/TARGET_STM/rtc_api.c
- Revision:
- 0:06036f8bee2d
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_STM/rtc_api.c Mon Oct 24 15:19:39 2022 +0000
@@ -0,0 +1,341 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#if DEVICE_RTC
+
+#include "rtc_api.h"
+#include "rtc_api_hal.h"
+#include "mbed_error.h"
+#include "mbed_mktime.h"
+
+static RTC_HandleTypeDef RtcHandle;
+
+#if RTC_LSI
+#define RTC_CLOCK LSI_VALUE
+#else
+#define RTC_CLOCK LSE_VALUE
+#endif
+
+#if DEVICE_LOWPOWERTIMER
+#define RTC_ASYNCH_PREDIV ((RTC_CLOCK - 1) / 0x8000)
+#define RTC_SYNCH_PREDIV (RTC_CLOCK / (RTC_ASYNCH_PREDIV + 1) - 1)
+#else
+#define RTC_ASYNCH_PREDIV (0x007F)
+#define RTC_SYNCH_PREDIV (RTC_CLOCK / (RTC_ASYNCH_PREDIV + 1) - 1)
+#endif
+
+#if DEVICE_LOWPOWERTIMER
+static void (*irq_handler)(void);
+static void RTC_IRQHandler(void);
+#endif
+
+void rtc_init(void)
+{
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+ RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
+
+ // Enable access to Backup domain
+ HAL_PWR_EnableBkUpAccess();
+
+ RtcHandle.Instance = RTC;
+
+#if !RTC_LSI
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
+ RCC_OscInitStruct.LSEState = RCC_LSE_ON;
+ RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
+
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
+ __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSE);
+ __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
+ } else {
+ error("Cannot initialize RTC with LSE\n");
+ }
+
+ PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC;
+ PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
+ if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) {
+ error("PeriphClkInitStruct RTC failed with LSE\n");
+ }
+#else /* !RTC_LSI */
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ // Reset Backup domain
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+
+ // Enable LSI clock
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
+ RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
+ RCC_OscInitStruct.LSIState = RCC_LSI_ON;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+ error("Cannot initialize RTC with LSI\n");
+ }
+
+ __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSI);
+ __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
+
+ PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC;
+ PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
+ if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) {
+ error("PeriphClkInitStruct RTC failed with LSI\n");
+ }
+#endif /* !RTC_LSI */
+
+ // Enable RTC
+ __HAL_RCC_RTC_ENABLE();
+
+#if TARGET_STM32F1
+ RtcHandle.Init.AsynchPrediv = RTC_AUTO_1_SECOND;
+#else /* TARGET_STM32F1 */
+ RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
+ RtcHandle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV;
+ RtcHandle.Init.SynchPrediv = RTC_SYNCH_PREDIV;
+ RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
+ RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
+ RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
+#endif /* TARGET_STM32F1 */
+
+ if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
+ error("RTC error: RTC initialization failed.");
+ }
+
+#if DEVICE_LOWPOWERTIMER
+
+#if !RTC_LSI
+ if (!rtc_isenabled())
+#endif /* !RTC_LSI */
+ {
+ rtc_write(0);
+ }
+
+ NVIC_ClearPendingIRQ(RTC_WKUP_IRQn);
+ NVIC_DisableIRQ(RTC_WKUP_IRQn);
+ NVIC_SetVector(RTC_WKUP_IRQn, (uint32_t)RTC_IRQHandler);
+ NVIC_EnableIRQ(RTC_WKUP_IRQn);
+
+#endif /* DEVICE_LOWPOWERTIMER */
+}
+
+void rtc_free(void)
+{
+#if RTC_LSI
+ // Enable Power clock
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ // Enable access to Backup domain
+ HAL_PWR_EnableBkUpAccess();
+
+ // Reset Backup domain
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+
+ // Disable access to Backup domain
+ HAL_PWR_DisableBkUpAccess();
+#endif
+
+ // Disable LSI and LSE clocks
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+ RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
+ RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
+ HAL_RCC_OscConfig(&RCC_OscInitStruct);
+}
+
+/*
+ ST RTC_DateTypeDef structure
+ WeekDay 1=monday, 2=tuesday, ..., 7=sunday
+ Month 0x1=january, 0x2=february, ..., 0x12=december
+ Date day of the month 1-31
+ Year year 0-99
+
+ ST RTC_TimeTypeDef structure
+ Hours 0-12 if the RTC_HourFormat_12 is selected during init
+ 0-23 if the RTC_HourFormat_24 is selected during init
+ Minutes 0-59
+ Seconds 0-59
+ TimeFormat RTC_HOURFORMAT12_AM/RTC_HOURFORMAT12_PM
+ SubSeconds time unit range between [0-1] Second with [1 Sec / SecondFraction +1] granularity
+ SecondFraction range or granularity of Sub Second register content corresponding to Synchronous pre-scaler factor value (PREDIV_S)
+ DayLightSaving RTC_DAYLIGHTSAVING_SUB1H/RTC_DAYLIGHTSAVING_ADD1H/RTC_DAYLIGHTSAVING_NONE
+ StoreOperation RTC_STOREOPERATION_RESET/RTC_STOREOPERATION_SET
+
+ struct tm
+ tm_sec seconds after the minute 0-61
+ tm_min minutes after the hour 0-59
+ tm_hour hours since midnight 0-23
+ tm_mday day of the month 1-31
+ tm_mon months since January 0-11
+ tm_year years since 1900
+ tm_wday days since Sunday 0-6
+ tm_yday days since January 1 0-365
+ tm_isdst Daylight Saving Time flag
+*/
+
+/*
+Information about STM32F0, STM32F2, STM32F3, STM32F4, STM32F7, STM32L0, STM32L1, STM32L4:
+BCD format is used to store the date in the RTC. The year is store on 2 * 4 bits.
+Because the first year is reserved to see if the RTC is init, the supposed range is 01-99.
+1st point is to cover the standard range from 1970 to 2038 (limited by the 32 bits of time_t).
+2nd point is to keep the year 1970 and the leap years synchronized.
+
+So by moving it 68 years forward from 1970, it become 1969-2067 which include 1970-2038.
+68 is also a multiple of 4 so it let the leap year synchronized.
+
+Information about STM32F1:
+32bit register is used (no BCD format) for the seconds and a software structure to store dates.
+It is then not a problem to not use shifts.
+*/
+
+time_t rtc_read(void)
+{
+ RTC_DateTypeDef dateStruct;
+ RTC_TimeTypeDef timeStruct;
+ struct tm timeinfo;
+
+ RtcHandle.Instance = RTC;
+
+ // Read actual date and time
+ // Warning: the time must be read first!
+ HAL_RTC_GetTime(&RtcHandle, &timeStruct, RTC_FORMAT_BIN);
+ HAL_RTC_GetDate(&RtcHandle, &dateStruct, RTC_FORMAT_BIN);
+
+ // Setup a tm structure based on the RTC
+ /* tm_wday information is ignored by mktime */
+ timeinfo.tm_mon = dateStruct.Month - 1;
+ timeinfo.tm_mday = dateStruct.Date;
+ timeinfo.tm_year = dateStruct.Year + 68;
+ timeinfo.tm_hour = timeStruct.Hours;
+ timeinfo.tm_min = timeStruct.Minutes;
+ timeinfo.tm_sec = timeStruct.Seconds;
+ // Daylight Saving Time information is not available
+ timeinfo.tm_isdst = -1;
+
+ // Convert to timestamp
+ time_t t = _rtc_mktime(&timeinfo);
+
+ return t;
+}
+
+void rtc_write(time_t t)
+{
+ RTC_DateTypeDef dateStruct;
+ RTC_TimeTypeDef timeStruct;
+
+ RtcHandle.Instance = RTC;
+
+ // Convert the time into a tm
+ struct tm timeinfo;
+ if (_rtc_localtime(t, &timeinfo) == false) {
+ return;
+ }
+
+ // Fill RTC structures
+ if (timeinfo.tm_wday == 0) {
+ dateStruct.WeekDay = 7;
+ } else {
+ dateStruct.WeekDay = timeinfo.tm_wday;
+ }
+ dateStruct.Month = timeinfo.tm_mon + 1;
+ dateStruct.Date = timeinfo.tm_mday;
+ dateStruct.Year = timeinfo.tm_year - 68;
+ timeStruct.Hours = timeinfo.tm_hour;
+ timeStruct.Minutes = timeinfo.tm_min;
+ timeStruct.Seconds = timeinfo.tm_sec;
+
+#if !(TARGET_STM32F1)
+ timeStruct.TimeFormat = RTC_HOURFORMAT_24;
+ timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
+ timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
+#endif /* TARGET_STM32F1 */
+
+ // Change the RTC current date/time
+ HAL_RTC_SetDate(&RtcHandle, &dateStruct, RTC_FORMAT_BIN);
+ HAL_RTC_SetTime(&RtcHandle, &timeStruct, RTC_FORMAT_BIN);
+}
+
+int rtc_isenabled(void)
+{
+#if !(TARGET_STM32F1)
+ return ( ((RTC->ISR & RTC_ISR_INITS) == RTC_ISR_INITS) && ((RTC->ISR & RTC_ISR_RSF) == RTC_ISR_RSF) );
+#else /* TARGET_STM32F1 */
+ return ((RTC->CRL & RTC_CRL_RSF) == RTC_CRL_RSF);
+#endif /* TARGET_STM32F1 */
+}
+
+#if DEVICE_LOWPOWERTIMER
+
+static void RTC_IRQHandler(void)
+{
+ HAL_RTCEx_WakeUpTimerIRQHandler(&RtcHandle);
+}
+
+void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc)
+{
+ if (irq_handler) {
+ // Fire the user callback
+ irq_handler();
+ }
+}
+
+void rtc_set_irq_handler(uint32_t handler)
+{
+ irq_handler = (void (*)(void))handler;
+}
+
+uint32_t rtc_read_subseconds(void)
+{
+ return 1000000.f * ((double)(RTC_SYNCH_PREDIV - RTC->SSR) / (RTC_SYNCH_PREDIV + 1));
+}
+
+void rtc_set_wake_up_timer(uint32_t delta)
+{
+ uint32_t wake_up_counter = delta / (2000000 / RTC_CLOCK);
+
+ if (HAL_RTCEx_SetWakeUpTimer_IT(&RtcHandle, wake_up_counter,
+ RTC_WAKEUPCLOCK_RTCCLK_DIV2) != HAL_OK) {
+ error("Set wake up timer failed\n");
+ }
+}
+
+void rtc_deactivate_wake_up_timer(void)
+{
+ HAL_RTCEx_DeactivateWakeUpTimer(&RtcHandle);
+}
+
+void rtc_synchronize(void)
+{
+ HAL_RTC_WaitForSynchro(&RtcHandle);
+}
+#endif /* DEVICE_LOWPOWERTIMER */
+
+#endif /* DEVICE_RTC */
+