File content as of revision 0:13413ea9a877:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef MBED_SERIALBASE_H
#define MBED_SERIALBASE_H
 
#include "platform/platform.h"
 
#if defined (DEVICE_SERIAL) || defined(DOXYGEN_ONLY)
 
#include "Callback.h"
#include "serial_api.h"
#include "mbed_toolchain.h"
#include "platform/NonCopyable.h"
 
#if DEVICE_SERIAL_ASYNCH
#include "CThunk.h"
#include "dma_api.h"
#endif
 
namespace mbed {
/** \addtogroup drivers */
 
/** A base class for serial port implementations
 * Can't be instantiated directly (use Serial or RawSerial)
 *
 * @note Synchronization level: Set by subclass
 * @ingroup drivers
 */
class SerialBase : private NonCopyable<SerialBase> {
 
public:
    /** Set the baud rate of the serial port
     *
     *  @param baudrate The baudrate of the serial port (default = 9600).
     */
    void baud(int baudrate);
 
    enum Parity {
        None = 0,
        Odd,
        Even,
        Forced1,
        Forced0
    };
 
    enum IrqType {
        RxIrq = 0,
        TxIrq,
 
        IrqCnt
    };
 
    enum Flow {
        Disabled = 0,
        RTS,
        CTS,
        RTSCTS
    };
 
    /** Set the transmission format used by the serial port
     *
     *  @param bits The number of bits in a word (5-8; default = 8)
     *  @param parity The parity used (SerialBase::None, SerialBase::Odd, SerialBase::Even, SerialBase::Forced1, SerialBase::Forced0; default = SerialBase::None)
     *  @param stop_bits The number of stop bits (1 or 2; default = 1)
     */
    void format(int bits=8, Parity parity=SerialBase::None, int stop_bits=1);
 
    /** Determine if there is a character available to read
     *
     *  @returns
     *    1 if there is a character available to read,
     *    0 otherwise
     */
    int readable();
 
    /** Determine if there is space available to write a character
     *
     *  @returns
     *    1 if there is space to write a character,
     *    0 otherwise
     */
    int writeable();
 
    /** Attach a function to call whenever a serial interrupt is generated
     *
     *  @param func A pointer to a void function, or 0 to set as none
     *  @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
     */
    void attach(Callback<void()> func, IrqType type=RxIrq);
 
    /** Attach a member function to call whenever a serial interrupt is generated
     *
     *  @param obj pointer to the object to call the member function on
     *  @param method pointer to the member function to be called
     *  @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
     *  @deprecated
     *      The attach function does not support cv-qualifiers. Replaced by
     *      attach(callback(obj, method), type).
     */
    template<typename T>
    MBED_DEPRECATED_SINCE("mbed-os-5.1",
        "The attach function does not support cv-qualifiers. Replaced by "
        "attach(callback(obj, method), type).")
    void attach(T *obj, void (T::*method)(), IrqType type=RxIrq) {
        attach(callback(obj, method), type);
    }
 
    /** Attach a member function to call whenever a serial interrupt is generated
     *
     *  @param obj pointer to the object to call the member function on
     *  @param method pointer to the member function to be called
     *  @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
     *  @deprecated
     *      The attach function does not support cv-qualifiers. Replaced by
     *      attach(callback(obj, method), type).
     */
    template<typename T>
    MBED_DEPRECATED_SINCE("mbed-os-5.1",
        "The attach function does not support cv-qualifiers. Replaced by "
        "attach(callback(obj, method), type).")
    void attach(T *obj, void (*method)(T*), IrqType type=RxIrq) {
        attach(callback(obj, method), type);
    }
 
    /** Generate a break condition on the serial line
     */
    void send_break();
 
protected:
 
    /** Acquire exclusive access to this serial port
     */
    virtual void lock(void);
 
    /** Release exclusive access to this serial port
     */
    virtual void unlock(void);
 
public:
 
#if DEVICE_SERIAL_FC
    /** Set the flow control type on the serial port
     *
     *  @param type the flow control type (Disabled, RTS, CTS, RTSCTS)
     *  @param flow1 the first flow control pin (RTS for RTS or RTSCTS, CTS for CTS)
     *  @param flow2 the second flow control pin (CTS for RTSCTS)
     */
    void set_flow_control(Flow type, PinName flow1=NC, PinName flow2=NC);
#endif
 
    static void _irq_handler(uint32_t id, SerialIrq irq_type);
 
#if DEVICE_SERIAL_ASYNCH
 
    /** Begin asynchronous write using 8bit buffer. The completition invokes registered TX event callback
     *
     *  This function locks the deep sleep until any event has occured
     * 
     *  @param buffer   The buffer where received data will be stored
     *  @param length   The buffer length in bytes
     *  @param callback The event callback function
     *  @param event    The logical OR of TX events
     */
    int write(const uint8_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_TX_COMPLETE);
 
    /** Begin asynchronous write using 16bit buffer. The completition invokes registered TX event callback
     *
     *  This function locks the deep sleep until any event has occured
     * 
     *  @param buffer   The buffer where received data will be stored
     *  @param length   The buffer length in bytes
     *  @param callback The event callback function
     *  @param event    The logical OR of TX events
     */
    int write(const uint16_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_TX_COMPLETE);
 
    /** Abort the on-going write transfer
     */
    void abort_write();
 
    /** Begin asynchronous reading using 8bit buffer. The completition invokes registred RX event callback.
     *
     *  This function locks the deep sleep until any event has occured
     * 
     *  @param buffer     The buffer where received data will be stored
     *  @param length     The buffer length in bytes
     *  @param callback   The event callback function
     *  @param event      The logical OR of RX events
     *  @param char_match The matching character
     */
    int read(uint8_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_RX_COMPLETE, unsigned char char_match = SERIAL_RESERVED_CHAR_MATCH);
 
    /** Begin asynchronous reading using 16bit buffer. The completition invokes registred RX event callback.
     *
     *  This function locks the deep sleep until any event has occured
     * 
     *  @param buffer     The buffer where received data will be stored
     *  @param length     The buffer length in bytes
     *  @param callback   The event callback function
     *  @param event      The logical OR of RX events
     *  @param char_match The matching character
     */
    int read(uint16_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_RX_COMPLETE, unsigned char char_match = SERIAL_RESERVED_CHAR_MATCH);
 
    /** Abort the on-going read transfer
     */
    void abort_read();
 
    /** Configure DMA usage suggestion for non-blocking TX transfers
     *
     *  @param usage The usage DMA hint for peripheral
     *  @return Zero if the usage was set, -1 if a transaction is on-going
     */
    int set_dma_usage_tx(DMAUsage usage);
 
    /** Configure DMA usage suggestion for non-blocking RX transfers
     *
     *  @param usage The usage DMA hint for peripheral
     *  @return Zero if the usage was set, -1 if a transaction is on-going
     */
    int set_dma_usage_rx(DMAUsage usage);
 
protected:
    void start_read(void *buffer, int buffer_size, char buffer_width, const event_callback_t& callback, int event, unsigned char char_match);
    void start_write(const void *buffer, int buffer_size, char buffer_width, const event_callback_t& callback, int event);
    void interrupt_handler_asynch(void);
#endif
 
protected:
    SerialBase(PinName tx, PinName rx, int baud);
    virtual ~SerialBase();
 
    int _base_getc();
    int _base_putc(int c);
 
#if DEVICE_SERIAL_ASYNCH
    CThunk<SerialBase> _thunk_irq;
    DMAUsage _tx_usage;
    DMAUsage _rx_usage;
    event_callback_t _tx_callback;
    event_callback_t _rx_callback;
#endif
 
    serial_t         _serial;
    Callback<void()> _irq[IrqCnt];
    int              _baud;
 
};
 
} // namespace mbed
 
#endif
 
#endif