mbed library sources. Supersedes mbed-src.

Fork of mbed-dev by mbed official

Revision:
144:ef7eb2e8f9f7
Parent:
0:9b334a45a8ff
diff -r 423e1876dc07 -r ef7eb2e8f9f7 targets/hal/TARGET_NXP/TARGET_LPC13XX/PinNames.h
--- a/targets/hal/TARGET_NXP/TARGET_LPC13XX/PinNames.h	Tue Aug 02 14:07:36 2016 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC13XX/PinNames.h	Fri Sep 02 15:07:44 2016 +0100
@@ -1,156 +1,156 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
-    PIN_INPUT,
-    PIN_OUTPUT
-} PinDirection;
-
-#define PORT_SHIFT  5
-
-typedef enum {
-    // LPC1347 Pin Names
-    P0_0 = 0,
-    P0_1 = 1,
-    P0_2 = 2,
-    P0_3 = 3,
-    P0_4 = 4,
-    P0_5 = 5,
-    P0_6 = 6,
-    P0_7 = 7,
-    P0_8 = 8,
-    P0_9 = 9,
-    P0_10 = 10,
-    P0_11 = 11,
-    P0_12 = 12,
-    P0_13 = 13,
-    P0_14 = 14,
-    P0_15 = 15,
-    P0_16 = 16,
-    P0_17 = 17,
-    P0_18 = 18,
-    P0_19 = 19,
-    P0_20 = 20,
-    P0_21 = 21,
-    P0_22 = 22,
-    P0_23 = 23,
-
-    P1_13 = 45,
-    P1_14 = 46,
-    P1_15 = 47,
-    P1_16 = 48,
-
-    P1_19 = 51,
-    P1_20 = 52,
-    P1_21 = 53,
-    P1_22 = 54,
-    P1_23 = 55,
-    P1_24 = 56,
-    P1_25 = 57,
-    P1_26 = 58,
-    P1_27 = 59,
-    P1_28 = 60,
-    P1_29 = 61,
-
-    P1_31 = 63,
-
-    // DIP Pin Names
-    p1  = P0_0,
-    p2  = P0_11,
-    p3  = P0_12,
-    p4  = P0_13,
-    p5  = P0_14,
-    p6  = P1_31,
-    p8  = P0_16,
-    p9  = P0_22,
-    p10 = P0_23,
-    p13 = P1_29,
-    p14 = P1_21,
-    p15 = P0_8,
-    p16 = P0_9,
-    p17 = P1_24,
-    p18 = P0_4,
-    p19 = P1_13,
-    p20 = P1_14,
-    p21 = P1_22,
-    p22 = P0_17,
-    p23 = P0_5,
-    p24 = P0_21,
-    p25 = P0_19,
-    p26 = P0_18,
-    p27 = P1_15,
-    p28 = P1_16,
-    p29 = P1_25,
-    p30 = P1_19,
-    p33 = P0_20,
-    p34 = P0_2,
-    p35 = P1_26,
-    p36 = P1_27,
-    p37 = P1_20,
-    p38 = P1_23,
-    p39 = P0_7,
-    p40 = P1_28,
-
-    UART_TX = P0_19,
-    UART_RX = P0_18,
-
-    // Not connected
-    NC = (int)0xFFFFFFFF,
-
-    LED1 = p21,
-    LED2 = p21,
-    LED3 = p21,
-    LED4 = p21,
-
-    // Standard but not supported pins
-    USBTX = NC,
-    USBRX = NC,
-
-} PinName;
-
-typedef enum {
-    CHANNEL0 = PIN_INT0_IRQn,
-    CHANNEL1 = PIN_INT1_IRQn,
-    CHANNEL2 = PIN_INT2_IRQn,
-    CHANNEL3 = PIN_INT3_IRQn,
-    CHANNEL4 = PIN_INT4_IRQn,
-    CHANNEL5 = PIN_INT5_IRQn,
-    CHANNEL6 = PIN_INT6_IRQn,
-    CHANNEL7 = PIN_INT7_IRQn
-} Channel;
-
-typedef enum {
-    PullUp = 2,
-    PullDown = 1,
-    PullNone = 0,
-    Repeater = 3,
-    OpenDrain = 4,
-    PullDefault = PullDown
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT  5
+
+typedef enum {
+    // LPC1347 Pin Names
+    P0_0 = 0,
+    P0_1 = 1,
+    P0_2 = 2,
+    P0_3 = 3,
+    P0_4 = 4,
+    P0_5 = 5,
+    P0_6 = 6,
+    P0_7 = 7,
+    P0_8 = 8,
+    P0_9 = 9,
+    P0_10 = 10,
+    P0_11 = 11,
+    P0_12 = 12,
+    P0_13 = 13,
+    P0_14 = 14,
+    P0_15 = 15,
+    P0_16 = 16,
+    P0_17 = 17,
+    P0_18 = 18,
+    P0_19 = 19,
+    P0_20 = 20,
+    P0_21 = 21,
+    P0_22 = 22,
+    P0_23 = 23,
+
+    P1_13 = 45,
+    P1_14 = 46,
+    P1_15 = 47,
+    P1_16 = 48,
+
+    P1_19 = 51,
+    P1_20 = 52,
+    P1_21 = 53,
+    P1_22 = 54,
+    P1_23 = 55,
+    P1_24 = 56,
+    P1_25 = 57,
+    P1_26 = 58,
+    P1_27 = 59,
+    P1_28 = 60,
+    P1_29 = 61,
+
+    P1_31 = 63,
+
+    // DIP Pin Names
+    p1  = P0_0,
+    p2  = P0_11,
+    p3  = P0_12,
+    p4  = P0_13,
+    p5  = P0_14,
+    p6  = P1_31,
+    p8  = P0_16,
+    p9  = P0_22,
+    p10 = P0_23,
+    p13 = P1_29,
+    p14 = P1_21,
+    p15 = P0_8,
+    p16 = P0_9,
+    p17 = P1_24,
+    p18 = P0_4,
+    p19 = P1_13,
+    p20 = P1_14,
+    p21 = P1_22,
+    p22 = P0_17,
+    p23 = P0_5,
+    p24 = P0_21,
+    p25 = P0_19,
+    p26 = P0_18,
+    p27 = P1_15,
+    p28 = P1_16,
+    p29 = P1_25,
+    p30 = P1_19,
+    p33 = P0_20,
+    p34 = P0_2,
+    p35 = P1_26,
+    p36 = P1_27,
+    p37 = P1_20,
+    p38 = P1_23,
+    p39 = P0_7,
+    p40 = P1_28,
+
+    UART_TX = P0_19,
+    UART_RX = P0_18,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+
+    LED1 = p21,
+    LED2 = p21,
+    LED3 = p21,
+    LED4 = p21,
+
+    // Standard but not supported pins
+    USBTX = NC,
+    USBRX = NC,
+
+} PinName;
+
+typedef enum {
+    CHANNEL0 = PIN_INT0_IRQn,
+    CHANNEL1 = PIN_INT1_IRQn,
+    CHANNEL2 = PIN_INT2_IRQn,
+    CHANNEL3 = PIN_INT3_IRQn,
+    CHANNEL4 = PIN_INT4_IRQn,
+    CHANNEL5 = PIN_INT5_IRQn,
+    CHANNEL6 = PIN_INT6_IRQn,
+    CHANNEL7 = PIN_INT7_IRQn
+} Channel;
+
+typedef enum {
+    PullUp = 2,
+    PullDown = 1,
+    PullNone = 0,
+    Repeater = 3,
+    OpenDrain = 4,
+    PullDefault = PullDown
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif