mbed library sources. Supersedes mbed-src.
Fork of mbed-dev by
Diff: targets/cmsis/TARGET_NUVOTON/TARGET_NUC472/StdDriver/nuc472_pwm.h
- Revision:
- 144:ef7eb2e8f9f7
diff -r 423e1876dc07 -r ef7eb2e8f9f7 targets/cmsis/TARGET_NUVOTON/TARGET_NUC472/StdDriver/nuc472_pwm.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_NUVOTON/TARGET_NUC472/StdDriver/nuc472_pwm.h Fri Sep 02 15:07:44 2016 +0100 @@ -0,0 +1,292 @@ +/**************************************************************************//** + * @file pwm.h + * @version V1.00 + * $Revision: 19 $ + * $Date: 14/10/06 1:36p $ + * @brief NUC472/NUC442 PWM driver header file + * + * @note + * Copyright (C) 2013 Nuvoton Technology Corp. All rights reserved. + *****************************************************************************/ +#ifndef __PWM_H__ +#define __PWM_H__ + +#ifdef __cplusplus +extern "C" +{ +#endif + + +/** @addtogroup NUC472_442_Device_Driver NUC472/NUC442 Device Driver + @{ +*/ + +/** @addtogroup NUC472_442_PWM_Driver PWM Driver + @{ +*/ + +/** @addtogroup NUC472_442_PWM_EXPORTED_CONSTANTS PWM Exported Constants + @{ +*/ +#define PWM_CHANNEL_NUM (6) /*!< PWM channel number \hideinitializer */ +#define PWM_CH_0_MASK (1UL) /*!< PWM channel 0 mask \hideinitializer */ +#define PWM_CH_1_MASK (2UL) /*!< PWM channel 1 mask \hideinitializer */ +#define PWM_CH_2_MASK (4UL) /*!< PWM channel 2 mask \hideinitializer */ +#define PWM_CH_3_MASK (8UL) /*!< PWM channel 3 mask \hideinitializer */ +#define PWM_CH_4_MASK (16UL) /*!< PWM channel 4 mask \hideinitializer */ +#define PWM_CH_5_MASK (32UL) /*!< PWM channel 5 mask \hideinitializer */ +#define PWM_CH_6_MASK (64UL) /*!< PWM channel 6 mask \hideinitializer */ +#define PWM_CH_7_MASK (128UL) /*!< PWM channel 7 mask \hideinitializer */ +#define PWM_CLK_DIV_1 (4UL) /*!< PWM clock divide by 1 \hideinitializer */ +#define PWM_CLK_DIV_2 (0UL) /*!< PWM clock divide by 2 \hideinitializer */ +#define PWM_CLK_DIV_4 (1UL) /*!< PWM clock divide by 4 \hideinitializer */ +#define PWM_CLK_DIV_8 (2UL) /*!< PWM clock divide by 8 \hideinitializer */ +#define PWM_CLK_DIV_16 (3UL) /*!< PWM clock divide by 16 \hideinitializer */ +#define PWM_EDGE_ALIGNED (0UL) /*!< PWM working in edge aligned type \hideinitializer */ +#define PWM_CENTER_ALIGNED (1UL) /*!< PWM working in center aligned type \hideinitializer */ +#define PWM_TRIGGER_ADC_RISING_EDGE_POINT (0x1000000UL) /*!< PWM trigger ADC while output rising edge is detected \hideinitializer */ +#define PWM_TRIGGER_ADC_FALLING_EDGE_POINT (0x10000UL) /*!< PWM trigger ADC while output falling edge is detected \hideinitializer */ +#define PWM_TRIGGER_ADC_CENTER_POINT (0x100UL) /*!< PWM trigger ADC while counter matches (CNR + 1) \hideinitializer */ +#define PWM_TRIGGER_ADC_PERIOD_POINT (0x1UL) /*!< PWM trigger ADC while counter down count to 0 \hideinitializer */ +#define PWM_BRK0_BKP0 (0UL) /*!< Brake0 signal source from external pin BKP0 \hideinitializer */ +#define PWM_BRK0_CPO0 (PWM_BRKCTL_CPO0BKEN_Msk) /*!< Brake0 signal source from analog comparator 0 output \hideinitializer */ +#define PWM_BRK0_CPO1 (PWM_BRKCTL_CPO1BKEN_Msk) /*!< Brake0 signal source from analog comparator 1 output \hideinitializer */ +#define PWM_BRK0_CPO2 (PWM_BRKCTL_CPO2BKEN_Msk) /*!< Brake0 signal source from analog comparator 2 output \hideinitializer */ +#define PWM_BK1SEL_BKP1 (0UL << PWM_BRKCTL_BK1SEL_Pos) /*!< Brake1 signal source from external pin BKP1 \hideinitializer */ +#define PWM_BK1SEL_CPO0 (1UL << PWM_BRKCTL_BK1SEL_Pos) /*!< Brake1 signal source from analog comparator 0 output \hideinitializer */ +#define PWM_BK1SEL_CPO1 (2UL << PWM_BRKCTL_BK1SEL_Pos) /*!< Brake1 signal source from analog comparator 1 output \hideinitializer */ +#define PWM_PERIOD_INT_UNDERFLOW (0) /*!< PWM period interrupt trigger if counter underflow \hideinitializer */ +#define PWM_PERIOD_INT_MATCH_CNR (1UL) /*!< PWM period interrupt trigger if counter match CNR \hideinitializer */ +#define PWM_DUTY_INT_MATCH_CMR_DN (0) /*!< PWM duty interrupt if counter match CNR during down counting \hideinitializer */ +#define PWM_DUTY_INT_MATCH_CMR_UP (0x100UL) /*!< PWM duty interrupt if counter match CNR during up counting \hideinitializer */ +#define PWM_FALLING_LATCH_INT_ENABLE (0x1000000UL) /*!< PWM falling latch interrupt enable \hideinitializer */ +#define PWM_RISING_LATCH_INT_ENABLE (0x10000UL) /*!< PWM rising latch interrupt enable \hideinitializer */ +#define PWM_RISING_FALLING_LATCH_INT_ENABLE (0x1010000UL) /*!< PWM rising latch interrupt enable \hideinitializer */ +#define PWM_FALLING_LATCH_INT_FLAG (PWM_FALLING_LATCH_INT_ENABLE) /*!< PWM falling latch condition happened \hideinitializer */ +#define PWM_RISING_LATCH_INT_FLAG (PWM_RISING_LATCH_INT_ENABLE) /*!< PWM rising latch condition happened \hideinitializer */ +#define PWM_RISING_FALLING_LATCH_INT_FLAG (PWM_RISING_FALLING_LATCH_INT_ENABLE) /*!< PWM rising latch condition happened \hideinitializer */ + +/*@}*/ /* end of group NUC472_442_PWM_EXPORTED_CONSTANTS */ + + +/** @addtogroup NUC472_442_PWM_EXPORTED_FUNCTIONS PWM Exported Functions + @{ +*/ + +/** + * @brief This macro enable complementary mode + * @param[in] pwm The base address of PWM module + * @return None + * \hideinitializer + */ +#define PWM_ENABLE_COMPLEMENTARY_MODE(pwm) (pwm->CTL = pwm->CTL | PWM_CTL_OUTMODE_Msk) + +/** + * @brief This macro disable complementary mode, and enable independent mode. + * @param[in] pwm The base address of PWM module + * @return None + * \hideinitializer + */ +#define PWM_DISABLE_COMPLEMENTARY_MODE(pwm) (pwm->CTL = pwm->CTL & ~PWM_CTL_OUTMODE_Msk) + +/** + * @brief This macro enable group mode + * @param[in] pwm The base address of PWM module + * @return None + * \hideinitializer + */ +#define PWM_ENABLE_GROUP_MODE(pwm) (pwm->CTL = pwm->CTL | PWM_CTL_GROUPEN_Msk) + +/** + * @brief This macro disable group mode + * @param[in] pwm The base address of PWM module + * @return None + * \hideinitializer + */ +#define PWM_DISABLE_GROUP_MODE(pwm) (pwm->CTL = pwm->CTL & ~PWM_CTL_GROUPEN_Msk) + +/** + * @brief This macro enable synchronous mode + * @param[in] pwm The base address of PWM module + * @return None + * \hideinitializer + */ +#define PWM_ENABLE_SYNC_MODE(pwm) (pwm->CTL = pwm->CTL | PWM_CTL_SYNCEN_Msk) + +/** + * @brief This macro disable synchronous mode, and enable independent mode. + * @param[in] pwm The base address of PWM module + * @return None + * \hideinitializer + */ +#define PWM_DISABLE_SYNC_MODE(pwm) (pwm->CTL = pwm->CTL & ~PWM_CTL_SYNCEN_Msk) + +/** + * @brief This macro enable output inverter of specified channel(s) + * @param[in] pwm The base address of PWM module + * @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel + * Bit 0 represents channel 0, bit 1 represents channel 1... + * @return None + * \hideinitializer + */ +#define PWM_ENABLE_OUTPUT_INVERTER(pwm, u32ChannelMask) (pwm->CTL |= (u32ChannelMask << PWM_CTL_PINV_Pos) + +/** + * @brief This macro get captured rising data + * @param[in] pwm The base address of PWM module + * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5 + * @return None + * \hideinitializer + */ +#define PWM_GET_CAPTURE_RISING_DATA(pwm, u32ChannelNum) (*(__IO uint32_t *) (&pwm->RCAPDAT0 + 2 * u32ChannelNum)) + +/** + * @brief This macro get captured falling data + * @param[in] pwm The base address of PWM module + * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5 + * @return None + * \hideinitializer + */ +#define PWM_GET_CAPTURE_FALLING_DATA(pwm, u32ChannelNum) (*(__IO uint32_t *) (&pwm->FCAPDAT0 + 2 * u32ChannelNum)) + +/** + * @brief This macro mask output output logic to high or low + * @param[in] pwm The base address of PWM module + * @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel + * Bit 0 represents channel 0, bit 1 represents channel 1... + * @param[in] u32LevelMask Output logic to high or low + * @return None + * \hideinitializer + */ +#define PWM_MASK_OUTPUT(pwm, u32ChannelMask, u32LevelMask) (pwm->MSKEN |= u32ChannelMask) + +/** + * @brief This macro set the prescaler of the selected channel + * @param[in] pwm The base address of PWM module + * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5 + * @param[in] u32Prescaler Clock prescaler of specified channel. Valid values are between 1 ~ 0xFF + * @return None + * @note Every even channel N, and channel (N + 1) share a prescaler. So if channel 0 prescaler changed, + * channel 1 will also be affected. + * \hideinitializer + */ +#define PWM_SET_PRESCALER(pwm, u32ChannelNum, u32Prescaler) \ + (pwm->CLKPSC = (pwm->CLKPSC & ~(PWM_CLKPSC_CLKPSC01_Msk << (((u32ChannelNum) >> 1) * 8))) | ((u32Prescaler) << (((u32ChannelNum) >> 1) * 8))) + +/** + * @brief This macro set the divider of the selected channel + * @param[in] pwm The base address of PWM module + * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5 + * @param[in] u32Divider Clock divider of specified channel. Valid values are + * - \ref PWM_CLK_DIV_1 + * - \ref PWM_CLK_DIV_2 + * - \ref PWM_CLK_DIV_4 + * - \ref PWM_CLK_DIV_8 + * - \ref PWM_CLK_DIV_16 + * @return None + * \hideinitializer + */ +#define PWM_SET_DIVIDER(pwm, u32ChannelNum, u32Divider) \ + (pwm->CLKDIV = (pwm->CLKDIV & ~(PWM_CLKDIV_CLKDIV0_Msk << ((u32ChannelNum) * 4))) | ((u32Divider) << ((u32ChannelNum) * 4))) + +/** + * @brief This macro set the duty of the selected channel + * @param[in] pwm The base address of PWM module + * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5 + * @param[in] u32CMR Duty of specified channel. Valid values are between 0~0xFFFF + * @return None + * @note This new setting will take effect on next PWM period + * \hideinitializer + */ +#define PWM_SET_CMR(pwm, u32ChannelNum, u32CMR) (pwm->CMPDAT[u32ChannelNum] = (u32CMR)) + +/** + * @brief This macro set the period of the selected channel + * @param[in] pwm The base address of PWM module + * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5 + * @param[in] u32CNR Period of specified channel. Valid values are between 0~0xFFFF + * @return None + * @note This new setting will take effect on next PWM period + * @note PWM counter will stop if period length set to 0 + * \hideinitializer + */ +#define PWM_SET_CNR(pwm, u32ChannelNum, u32CNR) (pwm->PERIOD[u32ChannelNum] = (u32CNR)) + +/** + * @brief This macro set the PWM aligned type + * @param[in] pwm The base address of PWM module + * @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel + * Bit 0 represents channel 0, bit 1 represents channel 1... + * @param[in] u32AlignedType PWM aligned type, valid values are: + * - \ref PWM_EDGE_ALIGNED + * - \ref PWM_CENTER_ALIGNED + * @return None + * \hideinitializer + */ +#define PWM_SET_ALIGNED_TYPE(pwm, u32ChannelMask, u32AlignedType) \ + (pwm->CTL = (pwm->CTL & ~(u32ChannelMask << PWM_CTL_CNTMODE_Pos) | (u32AlignedType << PWM_CTL_CNTMODE_Pos)) + + +uint32_t PWM_ConfigOutputChannel(PWM_T *pwm, + uint32_t u32ChannelNum, + uint32_t u32Frequency, + uint32_t u32DutyCycle); +uint32_t PWM_ConfigOutputChannel2(PWM_T *pwm, + uint32_t u32ChannelNum, + uint32_t u32Frequency, + uint32_t u32DutyCycle, + uint32_t u32Frequency2); +uint32_t PWM_ConfigCaptureChannel (PWM_T *pwm, + uint32_t u32ChannelNum, + uint32_t u32UnitTimeNsec, + uint32_t u32CaptureEdge); +void PWM_Start(PWM_T *pwm, uint32_t u32ChannelMask); +void PWM_Stop(PWM_T *pwm, uint32_t u32ChannelMask); +void PWM_ForceStop(PWM_T *pwm, uint32_t u32ChannelMask); +void PWM_EnableADCTrigger(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Condition); +void PWM_DisableADCTrigger(PWM_T *pwm, uint32_t u32ChannelNum); +void PWM_ClearADCTriggerFlag(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Condition); +uint32_t PWM_GetADCTriggerFlag(PWM_T *pwm, uint32_t u32ChannelNum); +void PWM_EnableFaultBrake(PWM_T *pwm, + uint32_t u32ChannelMask, + uint32_t u32LevelMask, + uint32_t u32BrakeSource); +void PWM_ClearFaultBrakeFlag(PWM_T *pwm, uint32_t u32BrakeSource); +void PWM_EnableCapture(PWM_T *pwm, uint32_t u32ChannelMask); +void PWM_DisableCapture(PWM_T *pwm, uint32_t u32ChannelMask); +void PWM_EnableOutput(PWM_T *pwm, uint32_t u32ChannelMask); +void PWM_DisableOutput(PWM_T *pwm, uint32_t u32ChannelMask); +void PWM_EnableDeadZone(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Duration); +void PWM_DisableDeadZone(PWM_T *pwm, uint32_t u32ChannelNum); +void PWM_EnableCaptureInt(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Edge); +void PWM_DisableCaptureInt(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Edge); +void PWM_ClearCaptureIntFlag(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Edge); +uint32_t PWM_GetCaptureIntFlag(PWM_T *pwm, uint32_t u32ChannelNum); +void PWM_EnableDutyInt(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32IntDutyType); +void PWM_DisableDutyInt(PWM_T *pwm, uint32_t u32ChannelNum); +void PWM_ClearDutyIntFlag(PWM_T *pwm, uint32_t u32ChannelNum); +uint32_t PWM_GetDutyIntFlag(PWM_T *pwm, uint32_t u32ChannelNum); +void PWM_EnableFaultBrakeInt(PWM_T *pwm, uint32_t u32BrakeSource); +void PWM_DisableFaultBrakeInt(PWM_T *pwm, uint32_t u32BrakeSource); +void PWM_ClearFaultBrakeIntFlag(PWM_T *pwm, uint32_t u32BrakeSource); +uint32_t PWM_GetFaultBrakeIntFlag(PWM_T *pwm, uint32_t u32BrakeSource); +void PWM_EnablePeriodInt(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32IntPeriodType); +void PWM_DisablePeriodInt(PWM_T *pwm, uint32_t u32ChannelNum); +void PWM_ClearPeriodIntFlag(PWM_T *pwm, uint32_t u32ChannelNum); +uint32_t PWM_GetPeriodIntFlag(PWM_T *pwm, uint32_t u32ChannelNum); + + + +/*@}*/ /* end of group NUC472_442_PWM_EXPORTED_FUNCTIONS */ + +/*@}*/ /* end of group NUC472_442_PWM_Driver */ + +/*@}*/ /* end of group NUC472_442_Device_Driver */ + +#ifdef __cplusplus +} +#endif + +#endif //__PWM_H__ + +/*** (C) COPYRIGHT 2013 Nuvoton Technology Corp. ***/